Re: [Qemu-trivial] [PATCH] Spelling fixes in comments and documentation

[Stefan Weil <sw@weilnetz.de>]

Ping?


Am 10.08.2012 22:03, schrieb Stefan Weil:
> These wrong spellings were detected by codespell:
>
> * successully -> successfully
>
> * alot -> a lot
>
> * wanna -> want to
>
> * infomation -> information
>
> * occured -> occurred
>
> Signed-off-by: Stefan Weil <sw@weilnetz.de>
> ---
>   docs/specs/ppc-spapr-hcalls.txt |    2 +-
>   docs/usb2.txt                   |    4 ++--
>   hw/xen_pt.h                     |    4 ++--
>   hw/xen_pt_config_init.c         |   14 +++++++-------
>   qemu-img.c                      |    2 +-
>   qemu-img.texi                   |    2 +-
>   6 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/docs/specs/ppc-spapr-hcalls.txt b/docs/specs/ppc-spapr-hcalls.txt
> index 52ba8d4..667b3fa 100644
> --- a/docs/specs/ppc-spapr-hcalls.txt
> +++ b/docs/specs/ppc-spapr-hcalls.txt
> @@ -31,7 +31,7 @@ Arguments:
>   
>   Returns:
>   
> -  H_SUCCESS   : Successully called the RTAS function (RTAS result
> +  H_SUCCESS   : Successfully called the RTAS function (RTAS result
>                   will have been stored in the parameter block)
>     H_PARAMETER : Unknown token
>   
> diff --git a/docs/usb2.txt b/docs/usb2.txt
> index d17e3c0..21f6d14 100644
> --- a/docs/usb2.txt
> +++ b/docs/usb2.txt
> @@ -58,11 +58,11 @@ try ...
>   xhci controller support
>   -----------------------
>   
> -There also is xhci host controller support available.  It got alot
> +There also is xhci host controller support available.  It got a lot
>   less testing than ehci and there are a bunch of known limitations, so
>   ehci may work better for you.  On the other hand the xhci hardware
>   design is much more virtualization-friendly, thus xhci emulation uses
> -less ressources (especially cpu).  If you wanna give xhci a try
> +less ressources (especially cpu).  If you want to give xhci a try
>   use this to add the host controller ...
>   
>       qemu -device nec-usb-xhci,id=xhci
> diff --git a/hw/xen_pt.h b/hw/xen_pt.h
> index 41904ec..112477a 100644
> --- a/hw/xen_pt.h
> +++ b/hw/xen_pt.h
> @@ -96,7 +96,7 @@ typedef struct XenPTRegion {
>    * - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
>    */
>   
> -/* emulated register infomation */
> +/* emulated register information */
>   struct XenPTRegInfo {
>       uint32_t offset;
>       uint32_t size;
> @@ -140,7 +140,7 @@ typedef int (*xen_pt_reg_size_init_fn)
>       (XenPCIPassthroughState *, const XenPTRegGroupInfo *,
>        uint32_t base_offset, uint8_t *size);
>   
> -/* emulated register group infomation */
> +/* emulated register group information */
>   struct XenPTRegGroupInfo {
>       uint8_t grp_id;
>       XenPTRegisterGroupType grp_type;
> diff --git a/hw/xen_pt_config_init.c b/hw/xen_pt_config_init.c
> index 00eb3d9..e524a40 100644
> --- a/hw/xen_pt_config_init.c
> +++ b/hw/xen_pt_config_init.c
> @@ -562,7 +562,7 @@ static int xen_pt_exp_rom_bar_reg_write(XenPCIPassthroughState *s,
>       return 0;
>   }
>   
> -/* Header Type0 reg static infomation table */
> +/* Header Type0 reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_header0[] = {
>       /* Vendor ID reg */
>       {
> @@ -753,7 +753,7 @@ static XenPTRegInfo xen_pt_emu_reg_header0[] = {
>    * Vital Product Data Capability
>    */
>   
> -/* Vital Product Data Capability Structure reg static infomation table */
> +/* Vital Product Data Capability Structure reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_vpd[] = {
>       {
>           .offset     = PCI_CAP_LIST_NEXT,
> @@ -775,7 +775,7 @@ static XenPTRegInfo xen_pt_emu_reg_vpd[] = {
>    * Vendor Specific Capability
>    */
>   
> -/* Vendor Specific Capability Structure reg static infomation table */
> +/* Vendor Specific Capability Structure reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_vendor[] = {
>       {
>           .offset     = PCI_CAP_LIST_NEXT,
> @@ -866,7 +866,7 @@ static int xen_pt_linkctrl2_reg_init(XenPCIPassthroughState *s,
>       return 0;
>   }
>   
> -/* PCI Express Capability Structure reg static infomation table */
> +/* PCI Express Capability Structure reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_pcie[] = {
>       /* Next Pointer reg */
>       {
> @@ -981,7 +981,7 @@ static int xen_pt_pmcsr_reg_write(XenPCIPassthroughState *s,
>       return 0;
>   }
>   
> -/* Power Management Capability reg static infomation table */
> +/* Power Management Capability reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_pm[] = {
>       /* Next Pointer reg */
>       {
> @@ -1259,7 +1259,7 @@ static int xen_pt_msgdata_reg_write(XenPCIPassthroughState *s,
>       return 0;
>   }
>   
> -/* MSI Capability Structure reg static infomation table */
> +/* MSI Capability Structure reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_msi[] = {
>       /* Next Pointer reg */
>       {
> @@ -1396,7 +1396,7 @@ static int xen_pt_msixctrl_reg_write(XenPCIPassthroughState *s,
>       return 0;
>   }
>   
> -/* MSI-X Capability Structure reg static infomation table */
> +/* MSI-X Capability Structure reg static information table */
>   static XenPTRegInfo xen_pt_emu_reg_msix[] = {
>       /* Next Pointer reg */
>       {
> diff --git a/qemu-img.c b/qemu-img.c
> index f20116a..3a21cc1 100644
> --- a/qemu-img.c
> +++ b/qemu-img.c
> @@ -89,7 +89,7 @@ static void help(void)
>              "  '-r' tries to repair any inconsistencies that are found during the check.\n"
>              "       '-r leaks' repairs only cluster leaks, whereas '-r all' fixes all\n"
>              "       kinds of errors, with a higher risk of choosing the wrong fix or\n"
> -           "       hiding corruption that has already occured.\n"
> +           "       hiding corruption that has already occurred.\n"
>              "\n"
>              "Parameters to snapshot subcommand:\n"
>              "  'snapshot' is the name of the snapshot to create, apply or delete\n"
> diff --git a/qemu-img.texi b/qemu-img.texi
> index 77c6d0b..9f3ac3f 100644
> --- a/qemu-img.texi
> +++ b/qemu-img.texi
> @@ -77,7 +77,7 @@ Perform a consistency check on the disk image @var{filename}.
>   If @code{-r} is specified, qemu-img tries to repair any inconsistencies found
>   during the check. @code{-r leaks} repairs only cluster leaks, whereas
>   @code{-r all} fixes all kinds of errors, with a higher risk of choosing the
> -wrong fix or hiding corruption that has already occured.
> +wrong fix or hiding corruption that has already occurred.
>   
>   Only the formats @code{qcow2}, @code{qed} and @code{vdi} support
>   consistency checks.