All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support
@ 2012-08-15  6:38 Terry Lv
  2012-08-15  6:38 ` [U-Boot] [PATCH 2/3] mxc_spi: change to use version config instead of soc config in mxc_spi Terry Lv
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Terry Lv @ 2012-08-15  6:38 UTC (permalink / raw)
  To: u-boot

Add spi nor support to mx53 smd, including iomux, configs, etc.
To test spi nor on mx53 smd:
MX53SMD U-Boot > sf probe 0:21249
JEDEC ID: 0x202016
m25p32 (4096 Kbytes)
SF: Detected m25p32 with page size 0 Bytes, total 4 MiB

Here, 21249 is integer of hex 0x5301. 0x01 is cs and 0x53 is active gpio
number.

Signed-off-by: Terry Lv <r65388@freescale.com>
---
 board/freescale/mx53smd/mx53smd.c |   63 +++++++++++++++++++++++++++++++++++++
 include/configs/mx53smd.h         |   17 ++++++++++
 2 files changed, 80 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 87fa7fa..abb1e9b 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -127,6 +127,65 @@ static void setup_iomux_fec(void)
 			PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
 }
 
+#ifdef CONFIG_MXC_SPI
+static void setup_iomux_spi(u8 bus, u8 ss)
+{
+	switch (bus) {
+	case 0:
+		/* SCLK */
+		mxc_request_iomux(MX53_PIN_EIM_D16, IOMUX_CONFIG_ALT4);
+		mxc_iomux_set_pad(MX53_PIN_EIM_D16,
+				PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+		mxc_iomux_set_input(MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT,
+				0x3);
+
+		/* MISO */
+		mxc_request_iomux(MX53_PIN_EIM_D17, IOMUX_CONFIG_ALT4);
+		mxc_iomux_set_pad(MX53_PIN_EIM_D17,
+				PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+		mxc_iomux_set_input(MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT,
+				0x3);
+
+		/* MOSI */
+		mxc_request_iomux(MX53_PIN_EIM_D18, IOMUX_CONFIG_ALT4);
+		mxc_iomux_set_pad(MX53_PIN_EIM_D18,
+				PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+		mxc_iomux_set_input(MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT,
+				0x3);
+
+		if (0 == ss) {
+			mxc_request_iomux(MX53_PIN_EIM_EB2,
+						IOMUX_CONFIG_ALT4);
+			mxc_iomux_set_pad(MX53_PIN_EIM_EB2,
+				PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+			mxc_iomux_set_input(
+				MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT,
+				0x3);
+
+			mxc_request_iomux(MX53_PIN_EIM_EB2, IOMUX_CONFIG_ALT1);
+			mxc_iomux_set_pad(MX53_PIN_EIM_EB2,
+					PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+		} else if (1 == ss){
+			mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT4);
+			mxc_iomux_set_pad(MX53_PIN_EIM_D19,
+				PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+			mxc_iomux_set_input(
+					MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT,
+					0x2);
+
+			mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT1);
+			mxc_iomux_set_pad(MX53_PIN_EIM_D19,
+					PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH);
+		}
+		break;
+	case 1:
+	case 2:
+	default:
+		break;
+	}
+}
+#endif
+
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{MMC_SDHC1_BASE_ADDR, 1},
@@ -203,6 +262,10 @@ int board_early_init_f(void)
 {
 	setup_iomux_uart();
 	setup_iomux_fec();
+#if defined(CONFIG_MXC_SPI) && defined(CONFIG_SPI_FLASH) \
+	&& defined(CONFIG_SPI_FLASH_BUS) && defined(CONFIG_SPI_FLASH_CS)
+	setup_iomux_spi(CONFIG_SPI_FLASH_BUS, CONFIG_SPI_FLASH_CS);
+#endif
 
 	return 0;
 }
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 48b32dd..e830c1b 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -65,6 +65,23 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* SPI Configs*/
+#define CONFIG_CMD_SPI
+#define CONFIG_MXC_SPI
+#define CONFIG_SPI_VER_2_3	1
+#define CONFIG_CSPI1_BASE_ADDR	CSPI1_BASE_ADDR
+#define CONFIG_CSPI2_BASE_ADDR	CSPI2_BASE_ADDR
+#define CONFIG_CSPI3_BASE_ADDR	CSPI3_BASE_ADDR
+
+/* SPI Flash Configs */
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO	1
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+#define CONFIG_SF_DEFAULT_MODE  (SPI_MODE_0)
+#define CONFIG_SPI_FLASH_BUS	0
+#define CONFIG_SPI_FLASH_CS	1
+
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
 #define CONFIG_MII
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-08-17 10:46 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-15  6:38 [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support Terry Lv
2012-08-15  6:38 ` [U-Boot] [PATCH 2/3] mxc_spi: change to use version config instead of soc config in mxc_spi Terry Lv
2012-08-17 10:44   ` Stefano Babic
2012-08-15  6:38 ` [U-Boot] [PATCH 3/3] mxc_spi: apply new mxc_spi version configs to other soc configs Terry Lv
2012-08-17 10:46   ` Stefano Babic
2012-08-17 10:36 ` [U-Boot] [PATCH 1/3] mx53_smd: add spi nor support Stefano Babic

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.