* sierra wireless MC8092
@ 2012-08-20 9:15 Lemoine Simon
2012-08-20 13:20 ` Denis Kenzior
0 siblings, 1 reply; 4+ messages in thread
From: Lemoine Simon @ 2012-08-20 9:15 UTC (permalink / raw)
To: ofono
[-- Attachment #1: Type: text/plain, Size: 3657 bytes --]
>Hi,
>
>I'm trying to use a Sierra Wireless MC8092 card with Ofono on an
>embedded system, but Ofono fail to setup the card because there are
>only five interfaces ttyUSB0 to ttyUSB4.
>
>I have seen in function setup_sierra (plugins/udevng.c) that Ofono
>expects to have a NetworkInterface on the interface 7.
>
>Does anybody know why the MC8092 doesn't have seven interfaces? Or
>which of the five interfaces could be the NetworkInterface?
It was because I haven't sierra_net driver in my kernel.
Now ofono finds the Network interface as usb0.
But I have an error with PIN authentication, and some AT commands return
ERROR, here is a part of the log I obtain :
ofonod[550]: plugins/udevng.c:setup_sierra() modem=/dev/ttyUSB3
app=/dev/ttyUSB4 net=usb0 diag=/dev/ttyUSB1
ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property
Modem
ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property App
ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property
Diag
ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property
NetworkInterface
ofonod[550]: src/modem.c:ofono_modem_register() 0xf6e38
ofonod[550]: plugins/sierra.c:sierra_probe() 0xf6e38
ofonod[550]: src/modem.c:emit_modem_added() 0xf6e38
ofonod[550]: src/modem.c:call_modemwatches() 0xf6e38 added:1
ofonod[550]: plugins/hfp_ag.c:modem_watch() modem: 0xf6e38, added: 1
ofonod[550]: plugins/dun_gw.c:modem_watch() modem: 0xf6e38, added: 1
ofonod[550]: plugins/smart-messaging.c:modem_watch() modem: 0xf6e38,
added: 1
ofonod[550]: plugins/push-notification.c:modem_watch() modem: 0xf6e38,
added: 1
ofonod[550]: plugins/sierra.c:sierra_enable() 0xf6e38
ofonod[550]: src/modem.c:get_modem_property() modem 0xf6e38 property
Modem
ofonod[550]: plugins/sierra.c:open_device() Modem /dev/ttyUSB3
ofonod[550]: Modem: > ATE0 &C0 +CMEE=1\r
ofonod[550]: Modem: < ATE0 &C0 +CMEE=1\r\r\nOK\r\n
ofonod[550]: Modem: > AT+CFUN=4\r
ofonod[550]: Modem: < \r\nOK\r\n
ofonod[550]: plugins/sierra.c:cfun_enable()
ofonod[550]: src/modem.c:modem_change_state() old state: 0, new state: 1
ofonod[550]: plugins/sierra.c:sierra_pre_sim() 0xf6e38
ofonod[550]: Modem: > AT+GCAP\r
ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408
ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408
ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408
ofonod[550]: Modem: < \r\n+GCAP: +CGSM,+DS,+ES\r\n\r\nOK\r\n
ofonod[550]: Modem: > AT+CRSM=192,12258,0,0,255\r
ofonod[550]: Modem: < \r\n+CME ERROR: 3\r\n
ofonod[550]: Modem: > AT+CGMI\r
ofonod[550]: Modem: < \r\nSierra Wireless, Incorporated\r\n\r\nOK\r\n
ofonod[550]: Modem: > AT+CRSM=192,28421,0,0,255\r
ofonod[550]: Modem: < \r\n+CME ERROR: 3\r\n
ofonod[550]: Modem: > AT+CGMM\r
ofonod[550]: Modem: < \r\nMC8092\r\n\r\nOK\r\n
ofonod[550]: Modem: > AT+CRSM=192,12037,0,0,255\r
ofonod[550]: Modem: < \r\n+CME ERROR: 3\r\n
ofonod[550]: Modem: > AT+CGMR\r
ofonod[550]: Modem: < \r\nP1_0_0_8AP R1338 CNHKGDKCE01 2011/10/21
09:21:31\r\n\r\nOK\r\n
ofonod[550]: Modem: > AT+CPIN?\r
ofonod[550]: Modem: < \r\n+CME ERROR: 14\r\n
ofonod[550]: Querying PIN authentication state failed
ofonod[550]: Modem: > AT+CGSN\r
ofonod[550]: Modem: < \r\n351516050021187\r\n\r\nOK\r\n
ofonod[550]: Modem: < \r\n!STKC: 81\r\n
AT+CRSM=192,12258,0,0,255 return an error. I have tried to send "AT
+CRSM=192,12258,0,0,255" to the modem by using minicom and it returns no
error. Do you know why it returns an error when I'm using Ofono?
I have add a retry loop on "AT+CPIN?" request,@the third attempt the
request return OK but no other commands are sent.
Simon
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: sierra wireless MC8092 2012-08-20 9:15 sierra wireless MC8092 Lemoine Simon @ 2012-08-20 13:20 ` Denis Kenzior 2012-08-21 7:47 ` Lemoine Simon 0 siblings, 1 reply; 4+ messages in thread From: Denis Kenzior @ 2012-08-20 13:20 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 4498 bytes --] Hi Simon, On 08/20/2012 04:15 AM, Lemoine Simon wrote: >> Hi, >> >> I'm trying to use a Sierra Wireless MC8092 card with Ofono on an >> embedded system, but Ofono fail to setup the card because there are >> only five interfaces ttyUSB0 to ttyUSB4. >> >> I have seen in function setup_sierra (plugins/udevng.c) that Ofono >> expects to have a NetworkInterface on the interface 7. >> >> Does anybody know why the MC8092 doesn't have seven interfaces? Or >> which of the five interfaces could be the NetworkInterface? > > It was because I haven't sierra_net driver in my kernel. > > Now ofono finds the Network interface as usb0. > But I have an error with PIN authentication, and some AT commands return > ERROR, here is a part of the log I obtain : > > ofonod[550]: plugins/udevng.c:setup_sierra() modem=/dev/ttyUSB3 > app=/dev/ttyUSB4 net=usb0 diag=/dev/ttyUSB1 > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property > Modem > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property App > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property > Diag > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property > NetworkInterface > ofonod[550]: src/modem.c:ofono_modem_register() 0xf6e38 > ofonod[550]: plugins/sierra.c:sierra_probe() 0xf6e38 > ofonod[550]: src/modem.c:emit_modem_added() 0xf6e38 > ofonod[550]: src/modem.c:call_modemwatches() 0xf6e38 added:1 > ofonod[550]: plugins/hfp_ag.c:modem_watch() modem: 0xf6e38, added: 1 > ofonod[550]: plugins/dun_gw.c:modem_watch() modem: 0xf6e38, added: 1 > ofonod[550]: plugins/smart-messaging.c:modem_watch() modem: 0xf6e38, > added: 1 > ofonod[550]: plugins/push-notification.c:modem_watch() modem: 0xf6e38, > added: 1 > ofonod[550]: plugins/sierra.c:sierra_enable() 0xf6e38 > ofonod[550]: src/modem.c:get_modem_property() modem 0xf6e38 property > Modem > ofonod[550]: plugins/sierra.c:open_device() Modem /dev/ttyUSB3 > ofonod[550]: Modem:> ATE0&C0 +CMEE=1\r > ofonod[550]: Modem:< ATE0&C0 +CMEE=1\r\r\nOK\r\n > ofonod[550]: Modem:> AT+CFUN=4\r > ofonod[550]: Modem:< \r\nOK\r\n > ofonod[550]: plugins/sierra.c:cfun_enable() > ofonod[550]: src/modem.c:modem_change_state() old state: 0, new state: 1 > ofonod[550]: plugins/sierra.c:sierra_pre_sim() 0xf6e38 > ofonod[550]: Modem:> AT+GCAP\r > ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408 > ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408 > ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408 > ofonod[550]: Modem:< \r\n+GCAP: +CGSM,+DS,+ES\r\n\r\nOK\r\n > ofonod[550]: Modem:> AT+CRSM=192,12258,0,0,255\r > ofonod[550]: Modem:< \r\n+CME ERROR: 3\r\n CME ERROR 3 means 'Operation not allowed'. > ofonod[550]: Modem:> AT+CGMI\r > ofonod[550]: Modem:< \r\nSierra Wireless, Incorporated\r\n\r\nOK\r\n > ofonod[550]: Modem:> AT+CRSM=192,28421,0,0,255\r > ofonod[550]: Modem:< \r\n+CME ERROR: 3\r\n > ofonod[550]: Modem:> AT+CGMM\r > ofonod[550]: Modem:< \r\nMC8092\r\n\r\nOK\r\n > ofonod[550]: Modem:> AT+CRSM=192,12037,0,0,255\r > ofonod[550]: Modem:< \r\n+CME ERROR: 3\r\n > ofonod[550]: Modem:> AT+CGMR\r > ofonod[550]: Modem:< \r\nP1_0_0_8AP R1338 CNHKGDKCE01 2011/10/21 > 09:21:31\r\n\r\nOK\r\n > ofonod[550]: Modem:> AT+CPIN?\r > ofonod[550]: Modem:< \r\n+CME ERROR: 14\r\n And this means 'Sim Busy' > ofonod[550]: Querying PIN authentication state failed > ofonod[550]: Modem:> AT+CGSN\r > ofonod[550]: Modem:< \r\n351516050021187\r\n\r\nOK\r\n > ofonod[550]: Modem:< \r\n!STKC: 81\r\n > > AT+CRSM=192,12258,0,0,255 return an error. I have tried to send "AT > +CRSM=192,12258,0,0,255" to the modem by using minicom and it returns no > error. Do you know why it returns an error when I'm using Ofono? > > I have add a retry loop on "AT+CPIN?" request, at the third attempt the > request return OK but no other commands are sent. > Basically what happens is that oFono is too fast. When you try this with minicom the firmware had enough time to initialize, but it does not have the same chance (time wise) with oFono. The modem firmware is trying to initialize its own internal state and throws all of these errors. What you might need to do is to add a periodic query of CPIN? until that returns something other than CME ERROR: 14. at_util_sim_state_query_new() does just that. See plugins/zte.c or plugins/speedup.c for an example of how this is done. Regards, -Denis ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: sierra wireless MC8092 2012-08-20 13:20 ` Denis Kenzior @ 2012-08-21 7:47 ` Lemoine Simon 0 siblings, 0 replies; 4+ messages in thread From: Lemoine Simon @ 2012-08-21 7:47 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 9370 bytes --] Hi Denis, Thanks for your answer, I have used at_util_sim_state_query_new() like in plugins/zte.c, and it works, CPIN? responds READY. But when I launch active-context script, I see that I get an IP address but I lost it right after. I have try to understand the code but I don't know why sw_gprs_deactivate_primary() is called, and why after ofono_netreg_status_notify() is called periodically. Here is a part of the log I obtain : # ./create-internet-context ofnew.fr ofonod[775]: src/gprs.c:add_context() Registering new context Created new context /sierra_6/context5 Setting APN to ofnew.fr # ./activate-context ofonod[775]: drivers/swmodem/gprs-context.c:sw_gprs_activate_primary() cid 1 ofonod[775]: Modem: > AT+CGDCONT=1,"IP","ofnew.fr"\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: drivers/swmodem/gprs-context.c:at_cgdcont_cb() ok 1 ofonod[775]: Modem: > AT!SCACT=1,1\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: drivers/swmodem/gprs-context.c:at_scact_up_cb() ok 1 ofonod[775]: src/modem.c:get_modem_property() modem 0xf3988 property NetworkInterface ofonod[775]: src/gprs.c:pri_activate_callback() 0xfba38 ofonod[775]: Modem: > AT!SCPADDR=1\r ofonod[775]: Modem: < \r\n!SCPADDR: 1,"10.32.202.200"\r\n\r\nOK\r\n ofonod[775]: drivers/swmodem/gprs-context.c:sw_gprs_deactivate_primary() cid 1 ofonod[775]: Modem: > AT!SCACT=0,1\r # ofonod[775]: Modem: < \r\nOK\r\n\r\n+CGEV: ME DEACT IP, 10.32.202.200, 1\r\n ofonod[775]: drivers/swmodem/gprs-context.c:at_scact_down_cb() ok 1 ofonod[775]: Modem: < \r\n+CREG: 1,"3808","0041F9A6",2\r\n\r\n+CGREG: 1,"3808","0041F9A6",2\r\n ofonod[775]: src/network.c:ofono_netreg_status_notify() /sierra_6 status 1 tech 2 ofonod[775]: src/gprs.c:netreg_status_changed() 1 ofonod[775]: src/gprs.c:ofono_gprs_status_notify() /sierra_6 status 1 ofonod[775]: Modem: > AT+COPS=3,2\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: Modem: > AT+COPS?\r ofonod[775]: Modem: < \r\n+COPS: 0,2,"20801",2\r\n\r\nOK\r\n ofonod[775]: drivers/atmodem/network-registration.c:cops_numeric_cb() Cops numeric got mcc: 208, mnc: 01 ofonod[775]: Modem: > AT+CIND?\r ofonod[775]: Modem: < \r\n+CIND: 2,3,1,0,0,0,1,0\r\n\r\nOK\r\n ofonod[775]: Modem: > AT+COPS=3,0\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: Modem: > AT+COPS?\r ofonod[775]: Modem: < \r\n+COPS: 0,0,"Orange F",2\r\n\r\nOK\r\n ofonod[775]: drivers/atmodem/network-registration.c:cops_cb() cops_cb: Orange F, 208 01 2 ofonod[775]: src/network.c:current_operator_callback() 0xf5c70, 0xec778 ofonod[775]: Modem: < \r\n+CREG: 1,"3808","00417168",2\r\n\r\n+CGREG: 1,"3808","00417168",2\r\n ofonod[775]: src/network.c:ofono_netreg_status_notify() /sierra_6 status 1 tech 2 ofonod[775]: src/gprs.c:netreg_status_changed() 1 ofonod[775]: src/gprs.c:ofono_gprs_status_notify() /sierra_6 status 1 ofonod[775]: Modem: > AT+COPS=3,2\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: Modem: > AT+COPS?\r ofonod[775]: Modem: < \r\n+COPS: 0,2,"20801",2\r\n\r\nOK\r\n ofonod[775]: drivers/atmodem/network-registration.c:cops_numeric_cb() Cops numeric got mcc: 208, mnc: 01 ofonod[775]: Modem: > AT+CIND?\r ofonod[775]: Modem: < \r\n+CIND: 2,3,1,0,0,0,1,0\r\n\r\nOK\r\n ofonod[775]: Modem: > AT+COPS=3,0\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: Modem: > AT+COPS?\r ofonod[775]: Modem: < \r\n+COPS: 0,0,"Orange F",2\r\n\r\nOK\r\n ofonod[775]: drivers/atmodem/network-registration.c:cops_cb() cops_cb: Orange F, 208 01 2 ofonod[775]: src/network.c:current_operator_callback() 0xf5c70, 0xec778 ofonod[775]: Modem: < \r\n+CREG: 1,"3808","0041F9A5",2\r\n\r\n+CGREG: 1,"3808","0041F9A5",2\r\n ofonod[775]: src/network.c:ofono_netreg_status_notify() /sierra_6 status 1 tech 2 ofonod[775]: src/gprs.c:netreg_status_changed() 1 ofonod[775]: src/gprs.c:ofono_gprs_status_notify() /sierra_6 status 1 ofonod[775]: Modem: > AT+COPS=3,2\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: Modem: > AT+COPS?\r ofonod[775]: Modem: < \r\n+COPS: 0,2,"20801",2\r\n\r\nOK\r\n ofonod[775]: drivers/atmodem/network-registration.c:cops_numeric_cb() Cops numeric got mcc: 208, mnc: 01 ofonod[775]: Modem: > AT+CIND?\r ofonod[775]: Modem: < \r\n+CIND: 2,3,1,0,0,0,1,0\r\n\r\nOK\r\n ofonod[775]: Modem: > AT+COPS=3,0\r ofonod[775]: Modem: < \r\nOK\r\n ofonod[775]: Modem: > AT+COPS?\r ofonod[775]: Modem: < \r\n+COPS: 0,0,"Orange F",2\r\n\r\nOK\r\n ofonod[775]: drivers/atmodem/network-registration.c:cops_cb() cops_cb: Orange F, 208 01 2 ofonod[775]: src/network.c:current_operator_callback() 0xf5c70, 0xec778 Thanks for your help. Simon Le lundi 20 août 2012 à 08:20 -0500, Denis Kenzior a écrit : > Hi Simon, > > On 08/20/2012 04:15 AM, Lemoine Simon wrote: > >> Hi, > >> > >> I'm trying to use a Sierra Wireless MC8092 card with Ofono on an > >> embedded system, but Ofono fail to setup the card because there are > >> only five interfaces ttyUSB0 to ttyUSB4. > >> > >> I have seen in function setup_sierra (plugins/udevng.c) that Ofono > >> expects to have a NetworkInterface on the interface 7. > >> > >> Does anybody know why the MC8092 doesn't have seven interfaces? Or > >> which of the five interfaces could be the NetworkInterface? > > > > It was because I haven't sierra_net driver in my kernel. > > > > Now ofono finds the Network interface as usb0. > > But I have an error with PIN authentication, and some AT commands return > > ERROR, here is a part of the log I obtain : > > > > ofonod[550]: plugins/udevng.c:setup_sierra() modem=/dev/ttyUSB3 > > app=/dev/ttyUSB4 net=usb0 diag=/dev/ttyUSB1 > > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property > > Modem > > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property App > > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property > > Diag > > ofonod[550]: src/modem.c:set_modem_property() modem 0xf6e38 property > > NetworkInterface > > ofonod[550]: src/modem.c:ofono_modem_register() 0xf6e38 > > ofonod[550]: plugins/sierra.c:sierra_probe() 0xf6e38 > > ofonod[550]: src/modem.c:emit_modem_added() 0xf6e38 > > ofonod[550]: src/modem.c:call_modemwatches() 0xf6e38 added:1 > > ofonod[550]: plugins/hfp_ag.c:modem_watch() modem: 0xf6e38, added: 1 > > ofonod[550]: plugins/dun_gw.c:modem_watch() modem: 0xf6e38, added: 1 > > ofonod[550]: plugins/smart-messaging.c:modem_watch() modem: 0xf6e38, > > added: 1 > > ofonod[550]: plugins/push-notification.c:modem_watch() modem: 0xf6e38, > > added: 1 > > ofonod[550]: plugins/sierra.c:sierra_enable() 0xf6e38 > > ofonod[550]: src/modem.c:get_modem_property() modem 0xf6e38 property > > Modem > > ofonod[550]: plugins/sierra.c:open_device() Modem /dev/ttyUSB3 > > ofonod[550]: Modem:> ATE0&C0 +CMEE=1\r > > ofonod[550]: Modem:< ATE0&C0 +CMEE=1\r\r\nOK\r\n > > ofonod[550]: Modem:> AT+CFUN=4\r > > ofonod[550]: Modem:< \r\nOK\r\n > > ofonod[550]: plugins/sierra.c:cfun_enable() > > ofonod[550]: src/modem.c:modem_change_state() old state: 0, new state: 1 > > ofonod[550]: plugins/sierra.c:sierra_pre_sim() 0xf6e38 > > ofonod[550]: Modem:> AT+GCAP\r > > ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408 > > ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408 > > ofonod[550]: src/sim.c:ofono_sim_add_state_watch() 0xf6408 > > ofonod[550]: Modem:< \r\n+GCAP: +CGSM,+DS,+ES\r\n\r\nOK\r\n > > ofonod[550]: Modem:> AT+CRSM=192,12258,0,0,255\r > > ofonod[550]: Modem:< \r\n+CME ERROR: 3\r\n > > CME ERROR 3 means 'Operation not allowed'. > > > ofonod[550]: Modem:> AT+CGMI\r > > ofonod[550]: Modem:< \r\nSierra Wireless, Incorporated\r\n\r\nOK\r\n > > ofonod[550]: Modem:> AT+CRSM=192,28421,0,0,255\r > > ofonod[550]: Modem:< \r\n+CME ERROR: 3\r\n > > ofonod[550]: Modem:> AT+CGMM\r > > ofonod[550]: Modem:< \r\nMC8092\r\n\r\nOK\r\n > > ofonod[550]: Modem:> AT+CRSM=192,12037,0,0,255\r > > ofonod[550]: Modem:< \r\n+CME ERROR: 3\r\n > > ofonod[550]: Modem:> AT+CGMR\r > > ofonod[550]: Modem:< \r\nP1_0_0_8AP R1338 CNHKGDKCE01 2011/10/21 > > 09:21:31\r\n\r\nOK\r\n > > ofonod[550]: Modem:> AT+CPIN?\r > > ofonod[550]: Modem:< \r\n+CME ERROR: 14\r\n > > And this means 'Sim Busy' > > > ofonod[550]: Querying PIN authentication state failed > > ofonod[550]: Modem:> AT+CGSN\r > > ofonod[550]: Modem:< \r\n351516050021187\r\n\r\nOK\r\n > > ofonod[550]: Modem:< \r\n!STKC: 81\r\n > > > > AT+CRSM=192,12258,0,0,255 return an error. I have tried to send "AT > > +CRSM=192,12258,0,0,255" to the modem by using minicom and it returns no > > error. Do you know why it returns an error when I'm using Ofono? > > > > I have add a retry loop on "AT+CPIN?" request, at the third attempt the > > request return OK but no other commands are sent. > > > > Basically what happens is that oFono is too fast. When you try this > with minicom the firmware had enough time to initialize, but it does not > have the same chance (time wise) with oFono. > > The modem firmware is trying to initialize its own internal state and > throws all of these errors. What you might need to do is to add a > periodic query of CPIN? until that returns something other than CME > ERROR: 14. at_util_sim_state_query_new() does just that. See > plugins/zte.c or plugins/speedup.c for an example of how this is done. > > Regards, > -Denis ^ permalink raw reply [flat|nested] 4+ messages in thread
* sierra wireless MC8092 @ 2012-08-14 9:19 Simon Lemoine 0 siblings, 0 replies; 4+ messages in thread From: Simon Lemoine @ 2012-08-14 9:19 UTC (permalink / raw) To: ofono [-- Attachment #1: Type: text/plain, Size: 499 bytes --] Hi, I'm trying to use a Sierra Wireless MC8092 card with Ofono on an embedded system, but Ofono fail to setup the card because there are only five interfaces ttyUSB0 to ttyUSB4. I have seen in function setup_sierra (plugins/udevng.c) that Ofono expects to have a NetworkInterface on the interface 7. Does anybody know why the MC8092 doesn't have seven interfaces? Or which of the five interfaces could be the NetworkInterface? Regards, Simon Lemoine [-- Attachment #2: attachment.html --] [-- Type: text/html, Size: 2598 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-08-21 7:47 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-08-20 9:15 sierra wireless MC8092 Lemoine Simon 2012-08-20 13:20 ` Denis Kenzior 2012-08-21 7:47 ` Lemoine Simon -- strict thread matches above, loose matches on Subject: below -- 2012-08-14 9:19 Simon Lemoine
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.