[PATCH] chipidea: Allow user to select PCI/IMX options

[PATCH] chipidea: Allow user to select PCI/IMX options

[Jeff Mahoney]

The chipidea driver currently has needless ifneq rules in the makefile
for things that should be config options. This can be problematic,
especially in the IMX case, since the OF_DEVICE dependency will be met
on powerpc systems - which don't actually support the hardware via that
method.

This patch adds _PCI and _IMX config options to allow the user to
select whether to build the modules.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
---
 drivers/usb/chipidea/Kconfig  |   11 +++++++++++
 drivers/usb/chipidea/Makefile |   11 ++---------
 2 files changed, 13 insertions(+), 9 deletions(-)

--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -31,4 +31,15 @@ config USB_CHIPIDEA_DEBUG
 	help
 	  Say Y here to enable debugging output of the ChipIdea driver.
 
+config USB_CHIPIDEA_PCI
+	bool "ChipIdea PCI support"
+	depends on PCI
+	help
+	  This option enables ChipIdea support on PCI.
+
+config USB_CHIPIDEA_IMX
+	bool "ChipIdea IMX support"
+	depends on OF_DEVICE
+	help
+	  This option enables ChipIdea support on IMX.
 endif
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -8,12 +8,5 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+=
 # Glue/Bridge layers go here
 
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
-
-# PCI doesn't provide stubs, need to check
-ifneq ($(CONFIG_PCI),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
-endif
-
-ifneq ($(CONFIG_OF_DEVICE),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
-endif
+obj-$(CONFIG_USB_CHIPIDEA_PCI)	+= ci13xxx_pci.o
+obj-$(CONFIG_USB_CHIPIDEA_IMX)	+= ci13xxx_imx.o

-- 
Jeff Mahoney
SUSE Labs