All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Date: Wed, 29 Aug 2012 17:00:50 -0700	[thread overview]
Message-ID: <503EAD32.90806@ti.com> (raw)
In-Reply-To: <20120829232153.GA23417@elf.ucw.cz>

On 08/29/2012 04:21 PM, Pavel Machek wrote:
> Hi!
> 
>>>>> diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
>>>>
>>>> You should setup MEMORY declarations like the other u-boot-spl linker
>>>> scripts do so we get build-time confirmation that we haven't exceeded
>>>> our size limitations.
>>>
>>> Hmm, I tried, but I don't know socfpga memory layout by heart.
>>>
>>> Dinh, can you help here?
>>
>> I think once you get the answers you should be able to re-post the
>> series cleanly and depend on my v5 (or v6) branch.  Thanks!
> 
> Ok, figuring the .lds might be tricky. But... that's mostly additional
> (safety) feature. Would it be possible to merge it without that and
> add it later?
> 
> Port to v5 of the patch should not be a problem.
> 
> For the record and review, current version of patch is here.

A few small comments.  No need to re-post intermediate patches, just
address in the next full go-round.  Thanks!

> diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
[snip]
> +/*
> + * Board initialization after bss clearance
> + */
> +void spl_board_init(void)
[snip]
> +	puts("SPL Boot\n");

Sure you want to keep that line?  We already have a general "U-Boot SPL
..." line being printed.

[snip]
> diff --git a/arch/arm/include/asm/arch-socfpga/spl.h b/arch/arm/include/asm/arch-socfpga/spl.h
[snip]
> +#define CONFIG_SPL_STACK (&__stack_start)
> +#define CONFIG_SYS_SPL_MALLOC_START (&__malloc_start)
> +#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)

These should be in the config file.

> diff --git a/board/altera/socfpga_cyclone5/socfpga_cyclone5.c b/board/altera/socfpga_cyclone5/socfpga_cyclone5.c
[snip]
> +/*
> + * miscellaneous platform dependent initialisations
> + */
> +int misc_init_r(void)
> +{
> +	/* Set to "n" for not verifying the uImage */
> +	setenv("verify", "n");
> +	return 0;
> +}

Not good to enforce policy like this.  Just don't set it in the config
file by default and let users do as they need.

[snip]
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index eaea1c8..5adbf0e 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -78,6 +78,7 @@ void spl_parse_image_header(const struct image_header *header)
>  	u32 header_size = sizeof(struct image_header);
>  
>  	if (__be32_to_cpu(header->ih_magic) == IH_MAGIC) {
> +		/* Valid image. Extract information out of header */
>  		spl_image.size = __be32_to_cpu(header->ih_size) + header_size;
>  		spl_image.entry_point = __be32_to_cpu(header->ih_load);
>  		/* Load including the header */

Just an extra comment, drop please.  Or split out if you feel it's
really helpful.  No strong opinion here other than not in the same patch
as the rest.

[snip]
> diff --git a/include/common.h b/include/common.h
> index 55025c0..469a3af 100644
> --- a/include/common.h
> +++ b/include/common.h
> @@ -704,7 +704,9 @@ void	external_interrupt (struct pt_regs *);
>  void	irq_install_handler(int, interrupt_handler_t *, void *);
>  void	irq_free_handler   (int);
>  void	reset_timer	   (void);
> -ulong	get_timer	   (ulong base);
> +ulong	get_timer(ulong base);
> +void	reset_timer_count(void);
> +ulong	get_timer_count(ulong base);
>  void	enable_interrupts  (void);
>  int	disable_interrupts (void);

Make the new declarations match the old, spacing wise please.

>  
> diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
> new file mode 100644
> index 0000000..d001cbb
> --- /dev/null
> +++ b/include/configs/socfpga_cyclone5.h
[snip]
> +#undef CONFIG_USE_IRQ
[snip]
> +
> +/*
> + * Stack sizes
> + * The stack sizes are set up in start.S using the settings below
> + */
> +/* regular stack */
> +#define CONFIG_STACKSIZE		(128 << 10)
> +#ifdef CONFIG_USE_IRQ
> +/* IRQ stack */
> +#define CONFIG_STACKSIZE_IRQ		(4 << 10)
> +/* FIQ stack */
> +#define CONFIG_STACKSIZE_FIQ		(4 << 10)
> +#endif

Unused, please drop.

[snip]
> +#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

This is the default now, can be dropped.

-- 
Tom

  reply	other threads:[~2012-08-30  0:00 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-16 22:45 [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5 dinguyen at altera.com
2012-08-22 22:10 ` Pavel Machek
2012-08-22 22:26 ` Marek Vasut
2012-08-23  1:13   ` Tom Rini
2012-08-23 10:43     ` Pavel Machek
2012-08-23 11:18       ` Stefan Roese
2012-08-29 12:30         ` Pavel Machek
2012-08-29 12:32           ` Stefan Roese
2012-08-24 19:18       ` Tom Rini
2012-08-25  9:03         ` Pavel Machek
2012-08-25 10:42         ` Pavel Machek
2012-08-25 11:56         ` Pavel Machek
2012-08-27 15:43           ` Tom Rini
2012-08-29 12:07             ` Pavel Machek
2012-08-25 12:05         ` Pavel Machek
2012-08-27 15:57           ` Tom Rini
2012-08-29 12:27             ` Pavel Machek
2012-08-29 13:41             ` Pavel Machek
2012-08-29 18:26               ` Tom Rini
2012-08-29 23:21                 ` Pavel Machek
2012-08-30  0:00                   ` Tom Rini [this message]
2012-08-30 17:18                     ` Pavel Machek
2012-08-30 17:34                       ` Tom Rini
2012-08-30 17:46                         ` Tom Rini
2012-08-30 18:05                         ` Pavel Machek
2012-08-30 18:30                           ` Tom Rini
2012-08-30 20:42                             ` Pavel Machek
2012-08-30 22:25                               ` Tom Rini
2012-08-31 21:26                                 ` Dinh Nguyen
2012-08-31 21:37                                   ` Tom Rini
2012-08-31  7:02                               ` Stefan Roese
2012-08-29 23:34                 ` Pavel Machek
2012-08-29 23:56                   ` Marek Vasut
2012-08-30 16:59                     ` Pavel Machek
2012-08-30 18:02                       ` Marek Vasut
2012-08-30 18:12                         ` Pavel Machek
2012-08-30 18:16                           ` Marek Vasut
2012-09-03  2:59                       ` Chin Liang See
2012-08-30  0:03                   ` Tom Rini
2012-08-30 17:20                     ` Pavel Machek
2012-08-23 10:56     ` Pavel Machek
2012-08-23 10:50   ` Pavel Machek
2012-08-24 22:59     ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=503EAD32.90806@ti.com \
    --to=trini@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.