From: Vaibhav Hiremath <hvaibhav@ti.com>
To: Jon Hunter <jon-hunter@ti.com>
Cc: Tony Lindgren <tony@atomide.com>, Kevin Hilman <khilman@ti.com>,
Paul Walmsley <paul@pwsan.com>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function
Date: Thu, 6 Sep 2012 18:28:01 +0530 [thread overview]
Message-ID: <50489DD9.90903@ti.com> (raw)
In-Reply-To: <1346871872-24413-10-git-send-email-jon-hunter@ti.com>
On 9/6/2012 12:34 AM, Jon Hunter wrote:
> The OMAP dmtimer driver does not currently have a function to disable the
> timer interrupts. For some timer instances the timer interrupt enable
> function can be used to disable the interrupts because the same interrupt
> enable register is used to disable interrupts. However, some timer instances
> have separate interrupt enable/disable registers and so this will not work.
> Therefore, add a dedicated function to disable interrupts.
>
I think you should clearly specify which timer and which device you are
referring to.
Thanks,
Vaibhav
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/plat-omap/dmtimer.c | 31 +++++++++++++++++++++++++++++
> arch/arm/plat-omap/include/plat/dmtimer.h | 3 ++-
> 2 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
> index 541adbb..3b548dc 100644
> --- a/arch/arm/plat-omap/dmtimer.c
> +++ b/arch/arm/plat-omap/dmtimer.c
> @@ -612,6 +612,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
> }
> EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
>
> +/**
> + * omap_dm_timer_set_int_disable - disable timer interrupts
> + * @timer: pointer to timer handle
> + * @mask: bit mask of interrupts to be disabled
> + *
> + * Disables the specified timer interrupts for a timer.
> + */
> +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
> +{
> + u32 l = mask;
> +
> + if (unlikely(!timer))
> + return -EINVAL;
> +
> + omap_dm_timer_enable(timer);
> +
> + if (timer->revision == 1)
> + l = __raw_readl(timer->irq_ena) & ~mask;
> +
> + __raw_writel(l, timer->irq_dis);
> + l = __omap_dm_timer_read(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
> + __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
> +
> + /* Save the context */
> + timer->context.tier &= ~mask;
> + timer->context.twer &= ~mask;
> + omap_dm_timer_disable(timer);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable);
> +
> unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
> {
> unsigned int l;
> diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
> index b3150a3..820f0ce 100644
> --- a/arch/arm/plat-omap/include/plat/dmtimer.h
> +++ b/arch/arm/plat-omap/include/plat/dmtimer.h
> @@ -130,6 +130,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i
> int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
>
> int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
> +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
>
> unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
> int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
> @@ -314,7 +315,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
> OMAP_TIMER_V1_SYS_STAT_OFFSET;
> timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
> timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
> - timer->irq_dis = NULL;
> + timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
> timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
> timer->func_base = timer->io_base;
> } else {
>
WARNING: multiple messages have this Message-ID (diff)
From: hvaibhav@ti.com (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function
Date: Thu, 6 Sep 2012 18:28:01 +0530 [thread overview]
Message-ID: <50489DD9.90903@ti.com> (raw)
In-Reply-To: <1346871872-24413-10-git-send-email-jon-hunter@ti.com>
On 9/6/2012 12:34 AM, Jon Hunter wrote:
> The OMAP dmtimer driver does not currently have a function to disable the
> timer interrupts. For some timer instances the timer interrupt enable
> function can be used to disable the interrupts because the same interrupt
> enable register is used to disable interrupts. However, some timer instances
> have separate interrupt enable/disable registers and so this will not work.
> Therefore, add a dedicated function to disable interrupts.
>
I think you should clearly specify which timer and which device you are
referring to.
Thanks,
Vaibhav
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/plat-omap/dmtimer.c | 31 +++++++++++++++++++++++++++++
> arch/arm/plat-omap/include/plat/dmtimer.h | 3 ++-
> 2 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
> index 541adbb..3b548dc 100644
> --- a/arch/arm/plat-omap/dmtimer.c
> +++ b/arch/arm/plat-omap/dmtimer.c
> @@ -612,6 +612,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
> }
> EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
>
> +/**
> + * omap_dm_timer_set_int_disable - disable timer interrupts
> + * @timer: pointer to timer handle
> + * @mask: bit mask of interrupts to be disabled
> + *
> + * Disables the specified timer interrupts for a timer.
> + */
> +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
> +{
> + u32 l = mask;
> +
> + if (unlikely(!timer))
> + return -EINVAL;
> +
> + omap_dm_timer_enable(timer);
> +
> + if (timer->revision == 1)
> + l = __raw_readl(timer->irq_ena) & ~mask;
> +
> + __raw_writel(l, timer->irq_dis);
> + l = __omap_dm_timer_read(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
> + __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
> +
> + /* Save the context */
> + timer->context.tier &= ~mask;
> + timer->context.twer &= ~mask;
> + omap_dm_timer_disable(timer);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable);
> +
> unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
> {
> unsigned int l;
> diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
> index b3150a3..820f0ce 100644
> --- a/arch/arm/plat-omap/include/plat/dmtimer.h
> +++ b/arch/arm/plat-omap/include/plat/dmtimer.h
> @@ -130,6 +130,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i
> int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
>
> int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
> +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
>
> unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
> int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
> @@ -314,7 +315,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
> OMAP_TIMER_V1_SYS_STAT_OFFSET;
> timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
> timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
> - timer->irq_dis = NULL;
> + timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
> timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
> timer->func_base = timer->io_base;
> } else {
>
next prev parent reply other threads:[~2012-09-06 12:58 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-05 19:04 [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767 Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-06 5:07 ` Vaibhav Hiremath
2012-09-06 5:07 ` Vaibhav Hiremath
2012-09-06 14:06 ` Jon Hunter
2012-09-06 14:06 ` Jon Hunter
2012-09-06 14:42 ` Jon Hunter
2012-09-06 14:42 ` Jon Hunter
2012-09-06 15:20 ` Jon Hunter
2012-09-06 15:20 ` Jon Hunter
2012-09-13 10:26 ` Hiremath, Vaibhav
2012-09-13 10:26 ` Hiremath, Vaibhav
2012-09-13 10:24 ` Hiremath, Vaibhav
2012-09-13 10:24 ` Hiremath, Vaibhav
2012-09-05 19:04 ` [PATCH 02/10] ARM: OMAP: Fix timer posted mode support Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-06 12:57 ` Vaibhav Hiremath
2012-09-06 12:57 ` Vaibhav Hiremath
2012-09-06 14:20 ` Jon Hunter
2012-09-06 14:20 ` Jon Hunter
2012-09-06 16:01 ` Jon Hunter
2012-09-06 16:01 ` Jon Hunter
2012-09-13 10:24 ` Hiremath, Vaibhav
2012-09-13 10:24 ` Hiremath, Vaibhav
2012-09-05 19:04 ` [PATCH 03/10] ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 04/10] ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 05/10] ARM: OMAP2+: Don't use __omap_dm_timer_reset() Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 06/10] ARM: OMAP: Fix dmtimer reset for timer1 Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 07/10] ARM: OMAP: Clean-up dmtimer reset code Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 08/10] ARM: OMAP: Clean-up timer posted mode support Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-07 22:22 ` Tony Lindgren
2012-09-07 22:22 ` Tony Lindgren
2012-09-10 21:59 ` Jon Hunter
2012-09-10 21:59 ` Jon Hunter
2012-09-11 0:58 ` Tony Lindgren
2012-09-11 0:58 ` Tony Lindgren
2012-09-11 16:26 ` Jon Hunter
2012-09-11 16:26 ` Jon Hunter
2012-09-11 16:34 ` Tony Lindgren
2012-09-11 16:34 ` Tony Lindgren
2012-09-13 3:26 ` Jon Hunter
2012-09-13 3:26 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 09/10] ARM: OMAP: Add dmtimer interrupt disable function Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-06 12:58 ` Vaibhav Hiremath [this message]
2012-09-06 12:58 ` Vaibhav Hiremath
2012-09-06 14:26 ` Jon Hunter
2012-09-06 14:26 ` Jon Hunter
2012-09-05 19:04 ` [PATCH 10/10] ARM: OMAP: Remove unnecessary call to clk_get() Jon Hunter
2012-09-05 19:04 ` Jon Hunter
2012-09-06 12:58 ` [PATCH 00/10] ARM: OMAP: DMTIMER fixes and clean-up Vaibhav Hiremath
2012-09-06 12:58 ` Vaibhav Hiremath
2012-09-06 14:30 ` Jon Hunter
2012-09-06 14:30 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50489DD9.90903@ti.com \
--to=hvaibhav@ti.com \
--cc=jon-hunter@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.