From: b-cousson@ti.com (Benoit Cousson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data
Date: Tue, 11 Sep 2012 12:18:28 +0200 [thread overview]
Message-ID: <504F0FF4.1090000@ti.com> (raw)
In-Reply-To: <1347345381-4390-4-git-send-email-kishon@ti.com>
On 09/11/2012 08:36 AM, Kishon Vijay Abraham I wrote:
> Add usb otg data node in omap4/omap3 device tree file. Also update
> the node with board specific setting in omapx-<board>.dts file.
> Acked-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 6 ++++++
> arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
> arch/arm/boot/dts/omap3.dtsi | 8 ++++++++
> arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
> arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
> arch/arm/boot/dts/omap4.dtsi | 8 ++++++++
> 6 files changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index cdcb98c..6d6a7a4 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -67,3 +67,9 @@
> &mmc3 {
> status = "disabled";
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index f349ee9..c4ac75e 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -46,3 +46,9 @@
> reg = <0x5c>;
> };
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 8109471..2501416 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -220,5 +220,13 @@
> compatible = "ti,omap3-wdt";
> ti,hwmods = "wd_timer2";
> };
> +
> + usb_otg_hs: usb_otg_hs {
> + compatible = "ti,omap3-musb";
> + ti,hwmods = "usb_otg_hs";
> + multipoint = <1>;
> + num_eps = <16>;
> + ram_bits = <12>;
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 2999eba..8cded95 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -130,3 +130,9 @@
> &twlusb {
> usb-supply = <&vusb>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <1>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index d8290c0..24f4bfd 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -230,3 +230,9 @@
> &twlusb {
> usb-supply = <&vusb>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <1>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 04cbbcb..5db3d6a 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -295,5 +295,13 @@
> interrupt-parent = <&gic>;
> ti,hwmods = "dmic";
> };
> +
> + usb_otg_hs: usb_otg_hs {
After rebasing your series on top of devel-dt, you should as well add
the missing reg/irq entries that are now supported thanks to Vaibhav.
Regards,
Benoit
> + compatible = "ti,omap4-musb";
> + ti,hwmods = "usb_otg_hs";
> + multipoint = <1>;
> + num_eps = <16>;
> + ram_bits = <12>;
> + };
> };
> };
>
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Cousson <b-cousson@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: <balbi@ti.com>, <linux@arm.linux.org.uk>,
<rob.herring@calxeda.com>, <grant.likely@secretlab.ca>,
<tony@atomide.com>, <rnayak@ti.com>, <hvaibhav@ti.com>,
<peter.ujfalusi@ti.com>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data
Date: Tue, 11 Sep 2012 12:18:28 +0200 [thread overview]
Message-ID: <504F0FF4.1090000@ti.com> (raw)
In-Reply-To: <1347345381-4390-4-git-send-email-kishon@ti.com>
On 09/11/2012 08:36 AM, Kishon Vijay Abraham I wrote:
> Add usb otg data node in omap4/omap3 device tree file. Also update
> the node with board specific setting in omapx-<board>.dts file.
> Acked-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 6 ++++++
> arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
> arch/arm/boot/dts/omap3.dtsi | 8 ++++++++
> arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
> arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
> arch/arm/boot/dts/omap4.dtsi | 8 ++++++++
> 6 files changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index cdcb98c..6d6a7a4 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -67,3 +67,9 @@
> &mmc3 {
> status = "disabled";
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index f349ee9..c4ac75e 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -46,3 +46,9 @@
> reg = <0x5c>;
> };
> };
> +
> +&usb_otg_hs {
> + interface_type = <0>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 8109471..2501416 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -220,5 +220,13 @@
> compatible = "ti,omap3-wdt";
> ti,hwmods = "wd_timer2";
> };
> +
> + usb_otg_hs: usb_otg_hs {
> + compatible = "ti,omap3-musb";
> + ti,hwmods = "usb_otg_hs";
> + multipoint = <1>;
> + num_eps = <16>;
> + ram_bits = <12>;
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 2999eba..8cded95 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -130,3 +130,9 @@
> &twlusb {
> usb-supply = <&vusb>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <1>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index d8290c0..24f4bfd 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -230,3 +230,9 @@
> &twlusb {
> usb-supply = <&vusb>;
> };
> +
> +&usb_otg_hs {
> + interface_type = <1>;
> + mode = <3>;
> + power = <50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 04cbbcb..5db3d6a 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -295,5 +295,13 @@
> interrupt-parent = <&gic>;
> ti,hwmods = "dmic";
> };
> +
> + usb_otg_hs: usb_otg_hs {
After rebasing your series on top of devel-dt, you should as well add
the missing reg/irq entries that are now supported thanks to Vaibhav.
Regards,
Benoit
> + compatible = "ti,omap4-musb";
> + ti,hwmods = "usb_otg_hs";
> + multipoint = <1>;
> + num_eps = <16>;
> + ram_bits = <12>;
> + };
> };
> };
>
next prev parent reply other threads:[~2012-09-11 10:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-11 6:36 [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2012-09-11 6:36 ` Kishon Vijay Abraham I
2012-09-11 6:36 ` [PATCH v2 1/3] arm/dts: Add twl6030-usb data Kishon Vijay Abraham I
2012-09-11 6:36 ` Kishon Vijay Abraham I
2012-09-11 9:26 ` Benoit Cousson
2012-09-11 9:26 ` Benoit Cousson
2012-09-11 9:39 ` ABRAHAM, KISHON VIJAY
2012-09-11 9:39 ` ABRAHAM, KISHON VIJAY
2012-09-11 10:05 ` Benoit Cousson
2012-09-11 10:05 ` Benoit Cousson
2012-09-11 6:36 ` [PATCH v2 2/3] arm/dts: Add twl4030-usb data Kishon Vijay Abraham I
2012-09-11 6:36 ` Kishon Vijay Abraham I
2012-09-11 10:09 ` Benoit Cousson
2012-09-11 10:09 ` Benoit Cousson
2012-09-11 11:07 ` ABRAHAM, KISHON VIJAY
2012-09-11 11:07 ` ABRAHAM, KISHON VIJAY
2012-09-11 6:36 ` [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2012-09-11 6:36 ` Kishon Vijay Abraham I
2012-09-11 10:18 ` Benoit Cousson [this message]
2012-09-11 10:18 ` Benoit Cousson
2012-09-11 8:25 ` [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB Benoit Cousson
2012-09-11 8:25 ` Benoit Cousson
2012-09-11 8:44 ` ABRAHAM, KISHON VIJAY
2012-09-11 8:44 ` ABRAHAM, KISHON VIJAY
2012-09-11 9:11 ` Benoit Cousson
2012-09-11 9:11 ` Benoit Cousson
2012-09-11 9:16 ` ABRAHAM, KISHON VIJAY
2012-09-11 9:16 ` ABRAHAM, KISHON VIJAY
2012-09-11 10:01 ` Benoit Cousson
2012-09-11 10:01 ` Benoit Cousson
2012-09-11 10:19 ` Benoit Cousson
2012-09-11 10:19 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=504F0FF4.1090000@ti.com \
--to=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.