[ 00/95] 3.2.29-stable review

[ 00/95] 3.2.29-stable review

[Ben Hutchings]

This is the start of the stable review cycle for the 3.2.29 release.
There are 95 patches in this series, which will be posted as responses
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Sep 11 23:00:00 UTC 2012.
Anything received after that time might be too late.

A combined patch relative to 3.2.28 will be posted as an additional
response to this, and the diffstat can be found below.

Note to submitters: the last mainline commit I scanned for cc fields
was e1d33a5c634bcf5f944034a2127c0026308c005c.  If your patch went into
mainline after this (approximately the last 2 weeks), please do not be
surprised that it is not here yet.  It should end up in the next
review, if applicable.

Ben.

-------------
 MAINTAINERS                                  |    2 +-
 Makefile                                     |    4 +-
 arch/alpha/include/asm/atomic.h              |    4 +-
 arch/alpha/include/asm/socket.h              |    2 +
 arch/arm/include/asm/pgtable.h               |    6 +-
 arch/arm/mm/tlb-v7.S                         |    6 +-
 arch/arm/vfp/vfpmodule.c                     |    2 +
 arch/x86/mm/hugetlbpage.c                    |   21 +-
 drivers/acpi/acpica/tbxface.c                |    1 +
 drivers/base/power/runtime.c                 |    5 +-
 drivers/block/cciss_scsi.c                   |   11 +-
 drivers/block/virtio_blk.c                   |   35 +-
 drivers/char/random.c                        |   21 +-
 drivers/firmware/dmi_scan.c                  |    3 +
 drivers/gpu/drm/i915/intel_display.c         |   11 -
 drivers/gpu/drm/i915/intel_dp.c              |   14 +-
 drivers/gpu/drm/nouveau/nvd0_display.c       |    2 +-
 drivers/gpu/drm/radeon/atombios.h            |  929 ++++++++++++++++++++++++--
 drivers/gpu/drm/radeon/radeon.h              |   15 -
 drivers/gpu/drm/radeon/radeon_atombios.c     |    2 +-
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |   55 +-
 drivers/gpu/drm/radeon/radeon_bios.c         |  140 +++-
 drivers/gpu/drm/radeon/radeon_object.c       |    3 +-
 drivers/hid/hid-chicony.c                    |    1 +
 drivers/hid/hid-core.c                       |    2 +
 drivers/hid/hid-cypress.c                    |    2 +
 drivers/hid/hid-ids.h                        |    2 +
 drivers/infiniband/ulp/srp/ib_srp.c          |   87 ++-
 drivers/md/md.c                              |    9 +-
 drivers/media/dvb/siano/smsusb.c             |    2 +-
 drivers/media/video/gspca/spca506.c          |    2 +-
 drivers/misc/sgi-xp/xpc_uv.c                 |   84 ++-
 drivers/net/netconsole.c                     |    1 -
 drivers/net/wireless/ath/ath9k/recv.c        |    2 +-
 drivers/net/wireless/p54/p54usb.c            |    2 +-
 drivers/net/wireless/rtl818x/rtl8187/dev.c   |    2 +-
 drivers/pci/pci-driver.c                     |    7 +
 drivers/platform/x86/asus-nb-wmi.c           |    4 +
 drivers/rapidio/devices/tsi721.c             |   12 +-
 drivers/rtc/rtc-rs5c348.c                    |    7 +-
 drivers/staging/speakup/main.c               |    2 +-
 drivers/staging/vt6656/main_usb.c            |    2 +-
 drivers/staging/winbond/wbusb.c              |    2 +-
 drivers/target/target_core_transport.c       |    4 +-
 drivers/tty/serial/pmac_zilog.c              |   12 +-
 drivers/usb/class/cdc-acm.c                  |    3 +-
 drivers/usb/gadget/u_ether.c                 |    6 +
 drivers/usb/host/pci-quirks.c                |    7 +
 drivers/usb/host/pci-quirks.h                |    1 +
 drivers/usb/host/xhci-pci.c                  |   10 +
 drivers/usb/host/xhci.c                      |    8 +-
 drivers/usb/host/xhci.h                      |    1 +
 drivers/usb/misc/emi62.c                     |    2 +-
 drivers/usb/serial/ftdi_sio.c                |    1 +
 drivers/usb/serial/ftdi_sio_ids.h            |    7 +
 drivers/usb/serial/mos7840.c                 |    9 +-
 drivers/usb/serial/option.c                  |  277 ++++----
 drivers/video/console/fbcon.c                |    9 +-
 fs/buffer.c                                  |   67 +-
 fs/compat.c                                  |   10 +-
 fs/ext4/super.c                              |    5 +
 fs/fuse/file.c                               |    2 +-
 fs/nfs/blocklayout/blocklayout.c             |    4 +-
 fs/nfs/blocklayout/extents.c                 |    2 +-
 fs/nfs/dir.c                                 |    4 +-
 fs/nfs/nfs3proc.c                            |    2 +-
 fs/nfs/nfs4filelayoutdev.c                   |    2 +-
 fs/nfs/nfs4proc.c                            |   57 +-
 fs/nfs/pnfs.c                                |   39 +-
 fs/nfs/pnfs.h                                |    2 +-
 fs/nfs/super.c                               |    2 +
 fs/nfs/write.c                               |   10 +-
 fs/open.c                                    |    7 +-
 fs/squashfs/super.c                          |    2 +-
 include/asm-generic/mutex-xchg.h             |   11 +-
 include/linux/usb.h                          |   21 +
 kernel/audit_tree.c                          |   11 +-
 kernel/sched.c                               |   34 +-
 mm/vmscan.c                                  |    6 +-
 net/bluetooth/hci_event.c                    |    8 +-
 net/bluetooth/l2cap_core.c                   |   15 +-
 net/dccp/ccid.h                              |    4 +-
 net/sunrpc/svc_xprt.c                        |   10 +-
 net/sunrpc/svcsock.c                         |    2 +-
 sound/pci/hda/hda_proc.c                     |    2 +-
 sound/pci/hda/patch_ca0132.c                 |    8 +
 sound/soc/codecs/wm9712.c                    |   19 +-
 87 files changed, 1697 insertions(+), 556 deletions(-)

-- 
Ben Hutchings
Time is nature's way of making sure that everything doesn't happen at once.

[ 01/95] HID: add ASUS AIO keyboard model AK1D

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cyrus Lien <cyrus.lien@canonical.com>

commit 2d8767bb421574dfcf48e4be0751ce7d8f73d5d7 upstream.

Add Asus All-In-One PC keyboard model AK1D.

BugLink: https://bugs.launchpad.net/bugs/1027789

Signed-off-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/hid-chicony.c |    1 +
 drivers/hid/hid-core.c    |    1 +
 drivers/hid/hid-ids.h     |    1 +
 3 files changed, 3 insertions(+)

--- a/drivers/hid/hid-chicony.c
+++ b/drivers/hid/hid-chicony.c
@@ -60,6 +60,7 @@ static int ch_input_mapping(struct hid_d
 static const struct hid_device_id ch_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ch_devices);
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1398,6 +1398,7 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -196,6 +196,7 @@
 #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH	0xb19d
 #define USB_DEVICE_ID_CHICONY_WIRELESS	0x0618
 #define USB_DEVICE_ID_CHICONY_WIRELESS2	0x1123
+#define USB_DEVICE_ID_CHICONY_AK1D	0x1125
 
 #define USB_VENDOR_ID_CHUNGHWAT		0x2247
 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH	0x0001

[ 02/95] nfs: tear down caches in nfs_init_writepagecache when allocation fails

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit 3dd4765fce04c0b4af1e0bc4c0b10f906f95fabc upstream.

...and ensure that we tear down the nfs_commit_data cache too when
unloading the module.

Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: drop the nfs_cdata_cachep cleanup; it doesn't exist]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/write.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1742,12 +1742,12 @@ int __init nfs_init_writepagecache(void)
 	nfs_wdata_mempool = mempool_create_slab_pool(MIN_POOL_WRITE,
 						     nfs_wdata_cachep);
 	if (nfs_wdata_mempool == NULL)
-		return -ENOMEM;
+		goto out_destroy_write_cache;
 
 	nfs_commit_mempool = mempool_create_slab_pool(MIN_POOL_COMMIT,
 						      nfs_wdata_cachep);
 	if (nfs_commit_mempool == NULL)
-		return -ENOMEM;
+		goto out_destroy_write_mempool;
 
 	/*
 	 * NFS congestion size, scale with available memory.
@@ -1770,6 +1770,12 @@ int __init nfs_init_writepagecache(void)
 		nfs_congestion_kb = 256*1024;
 
 	return 0;
+
+out_destroy_write_mempool:
+	mempool_destroy(nfs_wdata_mempool);
+out_destroy_write_cache:
+	kmem_cache_destroy(nfs_wdata_cachep);
+	return -ENOMEM;
 }
 
 void nfs_destroy_writepagecache(void)

[ 03/95] NFS: Use kcalloc() when allocating arrays

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 7d9dea915fe333357912bce2d624ee848dfbd890 upstream.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/blocklayout/extents.c |    2 +-
 fs/nfs/pnfs.c                |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/blocklayout/extents.c b/fs/nfs/blocklayout/extents.c
index 1abac09..1f9a603 100644
--- a/fs/nfs/blocklayout/extents.c
+++ b/fs/nfs/blocklayout/extents.c
@@ -147,7 +147,7 @@ static int _preload_range(struct pnfs_inval_markings *marks,
 	count = (int)(end - start) / (int)tree->mtt_step_size;
 
 	/* Pre-malloc what memory we might need */
-	storage = kmalloc(sizeof(*storage) * count, GFP_NOFS);
+	storage = kcalloc(count, sizeof(*storage), GFP_NOFS);
 	if (!storage)
 		return -ENOMEM;
 	for (i = 0; i < count; i++) {
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 17149a4..9292787 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -590,7 +590,7 @@ send_layoutget(struct pnfs_layout_hdr *lo,
 	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
 	max_pages = max_resp_sz >> PAGE_SHIFT;
 
-	pages = kzalloc(max_pages * sizeof(struct page *), gfp_flags);
+	pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags);
 	if (!pages)
 		goto out_err_free;
 

[ 04/95] NFSv4.1 fix page number calculation bug for filelayout decode buffers

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Adamson <andros@netapp.com>

commit e5265a0c587423bbd21a6b39a572cecff16b9346 upstream.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/nfs4filelayoutdev.c |    2 +-
 fs/nfs/pnfs.c              |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/nfs4filelayoutdev.c
+++ b/fs/nfs/nfs4filelayoutdev.c
@@ -721,7 +721,7 @@ get_device_info(struct inode *inode, str
 	 * GETDEVICEINFO's maxcount
 	 */
 	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
-	max_pages = max_resp_sz >> PAGE_SHIFT;
+	max_pages = nfs_page_array_len(0, max_resp_sz);
 	dprintk("%s inode %p max_resp_sz %u max_pages %d\n",
 		__func__, inode, max_resp_sz, max_pages);
 
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -588,7 +588,7 @@ send_layoutget(struct pnfs_layout_hdr *l
 
 	/* allocate pages for xdr post processing */
 	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
-	max_pages = max_resp_sz >> PAGE_SHIFT;
+	max_pages = nfs_page_array_len(0, max_resp_sz);
 
 	pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags);
 	if (!pages)

[ 05/95] fix page number calculation bug for block layout decode buffer

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Rees <rees@umich.edu>

commit 10bd295a0b6488ebe634b72a11d8986bd3af3819 upstream.

Signed-off-by: Jim Rees <rees@umich.edu>
Suggested-by: Andy Adamson <andros@netapp.com>
Suggested-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/blocklayout/blocklayout.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c
index 9c94297..7f6a23f 100644
--- a/fs/nfs/blocklayout/blocklayout.c
+++ b/fs/nfs/blocklayout/blocklayout.c
@@ -38,6 +38,8 @@
 #include <linux/buffer_head.h>	/* various write calls */
 #include <linux/prefetch.h>
 
+#include "../pnfs.h"
+#include "../internal.h"
 #include "blocklayout.h"
 
 #define NFSDBG_FACILITY	NFSDBG_PNFS_LD
@@ -868,7 +870,7 @@ nfs4_blk_get_deviceinfo(struct nfs_server *server, const struct nfs_fh *fh,
 	 * GETDEVICEINFO's maxcount
 	 */
 	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
-	max_pages = max_resp_sz >> PAGE_SHIFT;
+	max_pages = nfs_page_array_len(0, max_resp_sz);
 	dprintk("%s max_resp_sz %u max_pages %d\n",
 		__func__, max_resp_sz, max_pages);
 

[ 06/95] pnfs: defer release of pages in layoutget

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Idan Kedar <idank@tonian.com>

commit 8554116e17eef055d9dd58a94b3427cb2ad1c317 upstream.

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.

Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/nfs4proc.c |   57 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
 fs/nfs/pnfs.c     |   39 +-----------------------------------
 fs/nfs/pnfs.h     |    2 +-
 3 files changed, 58 insertions(+), 40 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5769,11 +5769,58 @@ static void nfs4_layoutget_done(struct r
 	dprintk("<-- %s\n", __func__);
 }
 
+static size_t max_response_pages(struct nfs_server *server)
+{
+	u32 max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
+	return nfs_page_array_len(0, max_resp_sz);
+}
+
+static void nfs4_free_pages(struct page **pages, size_t size)
+{
+	int i;
+
+	if (!pages)
+		return;
+
+	for (i = 0; i < size; i++) {
+		if (!pages[i])
+			break;
+		__free_page(pages[i]);
+	}
+	kfree(pages);
+}
+
+static struct page **nfs4_alloc_pages(size_t size, gfp_t gfp_flags)
+{
+	struct page **pages;
+	int i;
+
+	pages = kcalloc(size, sizeof(struct page *), gfp_flags);
+	if (!pages) {
+		dprintk("%s: can't alloc array of %zu pages\n", __func__, size);
+		return NULL;
+	}
+
+	for (i = 0; i < size; i++) {
+		pages[i] = alloc_page(gfp_flags);
+		if (!pages[i]) {
+			dprintk("%s: failed to allocate page\n", __func__);
+			nfs4_free_pages(pages, size);
+			return NULL;
+		}
+	}
+
+	return pages;
+}
+
 static void nfs4_layoutget_release(void *calldata)
 {
 	struct nfs4_layoutget *lgp = calldata;
+	struct nfs_server *server = NFS_SERVER(lgp->args.inode);
+	size_t max_pages = max_response_pages(server);
 
 	dprintk("--> %s\n", __func__);
+	nfs4_free_pages(lgp->args.layout.pages, max_pages);
 	put_nfs_open_context(lgp->args.ctx);
 	kfree(calldata);
 	dprintk("<-- %s\n", __func__);
@@ -5785,9 +5832,10 @@ static const struct rpc_call_ops nfs4_la
 	.rpc_release = nfs4_layoutget_release,
 };
 
-int nfs4_proc_layoutget(struct nfs4_layoutget *lgp)
+int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags)
 {
 	struct nfs_server *server = NFS_SERVER(lgp->args.inode);
+	size_t max_pages = max_response_pages(server);
 	struct rpc_task *task;
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LAYOUTGET],
@@ -5805,6 +5853,13 @@ int nfs4_proc_layoutget(struct nfs4_layo
 
 	dprintk("--> %s\n", __func__);
 
+	lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags);
+	if (!lgp->args.layout.pages) {
+		nfs4_layoutget_release(lgp);
+		return -ENOMEM;
+	}
+	lgp->args.layout.pglen = max_pages * PAGE_SIZE;
+
 	lgp->res.layoutp = &lgp->args.layout;
 	lgp->res.seq_res.sr_slot = NULL;
 	task = rpc_run_task(&task_setup_data);
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -575,9 +575,6 @@ send_layoutget(struct pnfs_layout_hdr *l
 	struct nfs_server *server = NFS_SERVER(ino);
 	struct nfs4_layoutget *lgp;
 	struct pnfs_layout_segment *lseg = NULL;
-	struct page **pages = NULL;
-	int i;
-	u32 max_resp_sz, max_pages;
 
 	dprintk("--> %s\n", __func__);
 
@@ -586,20 +583,6 @@ send_layoutget(struct pnfs_layout_hdr *l
 	if (lgp == NULL)
 		return NULL;
 
-	/* allocate pages for xdr post processing */
-	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
-	max_pages = nfs_page_array_len(0, max_resp_sz);
-
-	pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags);
-	if (!pages)
-		goto out_err_free;
-
-	for (i = 0; i < max_pages; i++) {
-		pages[i] = alloc_page(gfp_flags);
-		if (!pages[i])
-			goto out_err_free;
-	}
-
 	lgp->args.minlength = PAGE_CACHE_SIZE;
 	if (lgp->args.minlength > range->length)
 		lgp->args.minlength = range->length;
@@ -608,39 +591,19 @@ send_layoutget(struct pnfs_layout_hdr *l
 	lgp->args.type = server->pnfs_curr_ld->id;
 	lgp->args.inode = ino;
 	lgp->args.ctx = get_nfs_open_context(ctx);
-	lgp->args.layout.pages = pages;
-	lgp->args.layout.pglen = max_pages * PAGE_SIZE;
 	lgp->lsegpp = &lseg;
 	lgp->gfp_flags = gfp_flags;
 
 	/* Synchronously retrieve layout information from server and
 	 * store in lseg.
 	 */
-	nfs4_proc_layoutget(lgp);
+	nfs4_proc_layoutget(lgp, gfp_flags);
 	if (!lseg) {
 		/* remember that LAYOUTGET failed and suspend trying */
 		set_bit(lo_fail_bit(range->iomode), &lo->plh_flags);
 	}
 
-	/* free xdr pages */
-	for (i = 0; i < max_pages; i++)
-		__free_page(pages[i]);
-	kfree(pages);
-
 	return lseg;
-
-out_err_free:
-	/* free any allocated xdr pages, lgp as it's not used */
-	if (pages) {
-		for (i = 0; i < max_pages; i++) {
-			if (!pages[i])
-				break;
-			__free_page(pages[i]);
-		}
-		kfree(pages);
-	}
-	kfree(lgp);
-	return NULL;
 }
 
 /* Initiates a LAYOUTRETURN(FILE) */
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -162,7 +162,7 @@ extern int nfs4_proc_getdevicelist(struc
 				   struct pnfs_devicelist *devlist);
 extern int nfs4_proc_getdeviceinfo(struct nfs_server *server,
 				   struct pnfs_device *dev);
-extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp);
+extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags);
 extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp);
 
 /* pnfs.c */

[ 07/95] ext4: avoid kmemcheck complaint from reading uninitialized memory

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 7e731bc9a12339f344cddf82166b82633d99dd86 upstream.

Commit 03179fe923 introduced a kmemcheck complaint in
ext4_da_get_block_prep() because we save and restore
ei->i_da_metadata_calc_last_lblock even though it is left
uninitialized in the case where i_da_metadata_calc_len is zero.

This doesn't hurt anything, but silencing the kmemcheck complaint
makes it easier for people to find real bugs.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45631
(which is marked as a regression).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ext4/super.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index ccc4bca..56bcaec 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -959,6 +959,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	ei->i_reserved_meta_blocks = 0;
 	ei->i_allocated_meta_blocks = 0;
 	ei->i_da_metadata_calc_len = 0;
+	ei->i_da_metadata_calc_last_lblock = 0;
 	spin_lock_init(&(ei->i_block_reservation_lock));
 #ifdef CONFIG_QUOTA
 	ei->i_reserved_quota = 0;

[ 08/95] fuse: verify all ioctl retry iov elements

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zach Brown <zab@redhat.com>

commit fb6ccff667712c46b4501b920ea73a326e49626a upstream.

Commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 attempted to verify that
the total iovec from the client doesn't overflow iov_length() but it
only checked the first element.  The iovec could still overflow by
starting with a small element.  The obvious fix is to check all the
elements.

The overflow case doesn't look dangerous to the kernel as the copy is
limited by the length after the overflow.  This fix restores the
intention of returning an error instead of successfully copying less
than the iovec represented.

I found this by code inspection.  I built it but don't have a test case.
I'm cc:ing stable because the initial commit did as well.

Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/fuse/file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 5800101..2eed3ac 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1703,7 +1703,7 @@ static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count)
 	size_t n;
 	u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT;
 
-	for (n = 0; n < count; n++) {
+	for (n = 0; n < count; n++, iov++) {
 		if (iov->iov_len > (size_t) max)
 			return -ENOMEM;
 		max -= iov->iov_len;

[ 09/95] Bluetooth: Fix legacy pairing with some devices

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Szymon Janc <szymon.janc@tieto.com>

commit a9ea3ed9b71cc3271dd59e76f65748adcaa76422 upstream.

Some devices e.g. some Android based phones don't do SDP search before
pairing and cancel legacy pairing when ACL is disconnected.

PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT
is only received after remote user entered PIN.

In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT
(2 seconds) is being used to timeout ACL connection. This results in
problems with legacy pairing as remote user has only few seconds to
enter PIN before ACL is disconnected.

Increase disconnect timeout for incomming connection to
HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists.

To avoid keeping ACL alive for too long after SDP search set ACL
timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected.

2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8
    status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01
    Role: Slave
2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00
2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:72:D6:6A:3F mode 0
2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 5
2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 42 page 1
2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 42 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000
2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0'
2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 42
2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3
    status 0x13 handle 42
    Error: Remote User Terminated Connection
2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x13
    Reason: Remote User Terminated Connection

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
[bwh: Backported to 3.2:
 - Adjust context
 - hci_conn_ssp_enabled() is not defined; open-code the condition]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1411,7 +1411,13 @@ static inline void hci_conn_complete_evt
 		if (conn->type == ACL_LINK) {
 			conn->state = BT_CONFIG;
 			hci_conn_hold(conn);
-			conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+
+			if (!conn->out &&
+			    !(conn->ssp_mode && conn->hdev->ssp_mode) &&
+			    !hci_find_link_key(hdev, &ev->bdaddr))
+				conn->disc_timeout = HCI_PAIRING_TIMEOUT;
+			else
+				conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 			mgmt_connected(hdev->id, &ev->bdaddr, conn->type);
 		} else
 			conn->state = BT_CONNECTED;
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -862,6 +862,7 @@ static void l2cap_le_conn_ready(struct l
 	write_lock_bh(&conn->chan_lock);
 
 	hci_conn_hold(conn->hcon);
+	conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT;
 
 	bacpy(&bt_sk(sk)->src, conn->src);
 	bacpy(&bt_sk(sk)->dst, conn->dst);

[ 10/95] xhci: Increase reset timeout for Renesas 720201 host.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream.

The NEC/Renesas 720201 xHCI host controller does not complete its reset
within 250 milliseconds.  In fact, it takes about 9 seconds to reset the
host controller, and 1 second for the host to be ready for doorbell
rings.  Extend the reset and CNR polling timeout to 10 seconds each.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci:
BIOS handoff and HW initialization."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl>
[bwh: Backported to 3.2: result of second handshake call is returned directly]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -163,7 +163,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	xhci_writel(xhci, command, &xhci->op_regs->command);
 
 	ret = handshake(xhci, &xhci->op_regs->command,
-			CMD_RESET, 0, 250 * 1000);
+			CMD_RESET, 0, 10 * 1000 * 1000);
 	if (ret)
 		return ret;
 
@@ -172,7 +172,8 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
+	return handshake(xhci, &xhci->op_regs->status,
+			 STS_CNR, 0, 10 * 1000 * 1000);
 }
 
 #ifdef CONFIG_PCI

[ 11/95] xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 upstream.

Gary reports that with recent kernels, he notices more xHCI driver
warnings:

xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?

We think his Etron xHCI host controller may have the same buggy behavior
as the Fresco Logic xHCI host.  When a short transfer is received, the
host will mark the transfer as successfully completed when it should be
marking it with a short completion.

Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron
host is discovered.  Note that Gary has revision 1, but if Etron fixes
this bug in future revisions, the quirk will have no effect.

This patch should be backported to kernels as old as 2.6.36, that
contain a backported version of commit
1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk
for Fresco Logic host."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Gary E. Miller <gem@rellim.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci-pci.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 18b231b..92eaff6 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -99,6 +99,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;

[ 12/95] xhci: Switch PPT ports to EHCI on shutdown.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit e95829f474f0db3a4d940cae1423783edd966027 upstream.

The Intel desktop boards DH77EB and DH77DF have a hardware issue that
can be worked around by BIOS.  If the USB ports are switched to xHCI on
shutdown, the xHCI host will send a spurious interrupt, which will wake
the system.  Some BIOS will work around this, but not all.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.  The Intel Windows driver switches the ports back to EHCI, so
change the Linux xHCI driver to do the same.

Unfortunately, we can't tell the two effected boards apart from other
working motherboards, because the vendors will change the DMI strings
for the DH77EB and DH77DF boards to their own custom names.  One example
is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
Panther Point xHCI host PCI vendor and device ID, and switch the ports
over for all PPT xHCI hosts.

The only impact this will have on non-effected boards is to add a couple
hundred milliseconds delay on boot when the BIOS has to switch the ports
over from EHCI to xHCI.

This patch should be backported to kernels as old as 3.0, that contain
the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Denis Turischev <denis@compulab.co.il>
Tested-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/pci-quirks.c |    7 +++++++
 drivers/usb/host/pci-quirks.h |    1 +
 drivers/usb/host/xhci-pci.c   |    9 +++++++++
 drivers/usb/host/xhci.c       |    3 +++
 drivers/usb/host/xhci.h       |    1 +
 5 files changed, 21 insertions(+)

--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_de
 }
 EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
 
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
 /**
  * PCI Quirks for xHCI.
  *
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
 void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -90,6 +90,15 @@ static void xhci_pci_quirks(struct devic
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -648,6 +648,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
+	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
+
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	spin_unlock_irq(&xhci->lock);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1471,6 +1471,7 @@ struct xhci_hcd {
 #define	XHCI_SW_BW_CHECKING	(1 << 8)
 #define XHCI_AMD_0x96_HOST	(1 << 9)
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
+#define XHCI_SPURIOUS_REBOOT	(1 << 13)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

Re: [ 12/95] xhci: Switch PPT ports to EHCI on shutdown.

[Denis Turischev]

Hi Ben,

As reported by Robert Hancock there is a typo in if statement below.
Do you want I resubmit it? Or should we wait for Sarah Sharp review?

Denis Turischev

On 09/10/2012 01:42 AM, Ben Hutchings wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
> 
> commit e95829f474f0db3a4d940cae1423783edd966027 upstream.
> 
> The Intel desktop boards DH77EB and DH77DF have a hardware issue that
> can be worked around by BIOS.  If the USB ports are switched to xHCI on
> shutdown, the xHCI host will send a spurious interrupt, which will wake
> the system.  Some BIOS will work around this, but not all.
> 
> The bug can be avoided if the USB ports are switched back to EHCI on
> shutdown.  The Intel Windows driver switches the ports back to EHCI, so
> change the Linux xHCI driver to do the same.
> 
> Unfortunately, we can't tell the two effected boards apart from other
> working motherboards, because the vendors will change the DMI strings
> for the DH77EB and DH77DF boards to their own custom names.  One example
> is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
> Panther Point xHCI host PCI vendor and device ID, and switch the ports
> over for all PPT xHCI hosts.
> 
> The only impact this will have on non-effected boards is to add a couple
> hundred milliseconds delay on boot when the BIOS has to switch the ports
> over from EHCI to xHCI.
> 
> This patch should be backported to kernels as old as 3.0, that contain
> the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
> EHCI/xHCI port switching."
> 
> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
> Reported-by: Denis Turischev <denis@compulab.co.il>
> Tested-by: Denis Turischev <denis@compulab.co.il>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/usb/host/pci-quirks.c |    7 +++++++
>  drivers/usb/host/pci-quirks.h |    1 +
>  drivers/usb/host/xhci-pci.c   |    9 +++++++++
>  drivers/usb/host/xhci.c       |    3 +++
>  drivers/usb/host/xhci.h       |    1 +
>  5 files changed, 21 insertions(+)
> 
> --- a/drivers/usb/host/pci-quirks.c
> +++ b/drivers/usb/host/pci-quirks.c
> @@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_de
>  }
>  EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
>  
> +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
> +{
> +	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
> +	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
> +}
> +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
> +
>  /**
>   * PCI Quirks for xHCI.
>   *
> --- a/drivers/usb/host/pci-quirks.h
> +++ b/drivers/usb/host/pci-quirks.h
> @@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
>  void usb_amd_quirk_pll_enable(void);
>  bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
>  void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
> +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
>  #else
>  static inline void usb_amd_quirk_pll_disable(void) {}
>  static inline void usb_amd_quirk_pll_enable(void) {}
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -90,6 +90,15 @@ static void xhci_pci_quirks(struct devic
>  		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
>  		xhci->limit_active_eps = 64;
>  		xhci->quirks |= XHCI_SW_BW_CHECKING;
> +		/*
> +		 * PPT desktop boards DH77EB and DH77DF will power back on after
> +		 * a few seconds of being shutdown.  The fix for this is to
> +		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
> +		 * DMI information to find those particular boards (since each
> +		 * vendor will change the board name), so we have to key off all
> +		 * PPT chipsets.
> +		 */
> +		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
>  	}
>  	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
>  			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -648,6 +648,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
>  {
>  	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>  
> +	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)


This looks like a typo, think it should be & not &&. With this code, it
appears the quirk will always be triggered since XHCI_SPURIOUS_REBOOT is
non-zero.


> +		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
> +
>  	spin_lock_irq(&xhci->lock);
>  	xhci_halt(xhci);
>  	spin_unlock_irq(&xhci->lock);
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1471,6 +1471,7 @@ struct xhci_hcd {
>  #define	XHCI_SW_BW_CHECKING	(1 << 8)
>  #define XHCI_AMD_0x96_HOST	(1 << 9)
>  #define XHCI_TRUST_TX_LENGTH	(1 << 10)
> +#define XHCI_SPURIOUS_REBOOT	(1 << 13)
>  	unsigned int		num_active_eps;
>  	unsigned int		limit_active_eps;
>  	/* There are two roothubs to keep track of bus suspend info for */
> 
> 

Re: [ 12/95] xhci: Switch PPT ports to EHCI on shutdown.

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 898 bytes --]

On Mon, 2012-09-10 at 14:09 +0300, Denis Turischev wrote:
> Hi Ben,
> 
> As reported by Robert Hancock there is a typo in if statement below.
> Do you want I resubmit it? Or should we wait for Sarah Sharp review?
[...]
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -648,6 +648,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
> >  {
> >  	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> >  
> > +	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
> 
> 
> This looks like a typo, think it should be & not &&. With this code, it
> appears the quirk will always be triggered since XHCI_SPURIOUS_REBOOT is
> non-zero.
[...]

As the typo is not fixed in mainline, I can't fix it in 3.2.y yet.  So
I'll defer this until that happens.

Thanks for your review.

Ben.

-- 
Ben Hutchings
Make three consecutive correct guesses and you will be considered an expert.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

[ 13/95] USB: ftdi_sio: Add VID/PID for Kondo Serial USB

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1819 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ozan Çağflayan <ozancag@gmail.com>

commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream.

This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter
interface:
http://www.kondo-robot.com/EN/wp/?cat=28

Tested by controlling an RCB3 board using libRCB3.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index bc912e5..5620db6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -811,6 +811,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
 	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 5661c7e..5dd96ca 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -795,6 +795,13 @@
 #define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
 
 /*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 		0x165c
+#define KONDO_USB_SERIAL_PID	0x0002
+
+/*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
  */

[ 14/95] USB: option: Add Vodafone/Huawei K5005 support

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1765 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 4cbbb039a9719fb3bba73d255c6a95bc6dc6428b upstream.

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -151,6 +151,7 @@ static void option_instat_callback(struc
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_K5005			0x14C8
 #define HUAWEI_PRODUCT_K3770			0x14C9
 #define HUAWEI_PRODUCT_K3771			0x14CA
 #define HUAWEI_PRODUCT_K4510			0x14CB
@@ -692,6 +693,9 @@ static const struct usb_device_id option
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },

[ 15/95] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>

commit d81a5d1956731c453b85c141458d4ff5d6cc5366 upstream.

A lot of Broadcom Bluetooth devices provides vendor specific interface
class and we are getting flooded by patches adding new device support.
This change will help us enable support for any other Broadcom with vendor
specific device that arrives in the future.

Only the product id changes for those devices, so this macro would be
perfect for us:

{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Henrik Rydberg <rydberg@bitmath.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/usb.h |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/usb.h b/include/linux/usb.h
index 873956b..30d1ae3 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -861,6 +861,27 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
 	.bInterfaceSubClass = (sc), \
 	.bInterfaceProtocol = (pr)
 
+/**
+ * USB_VENDOR_AND_INTERFACE_INFO - describe a specific usb vendor with a class of usb interfaces
+ * @vend: the 16 bit USB Vendor ID
+ * @cl: bInterfaceClass value
+ * @sc: bInterfaceSubClass value
+ * @pr: bInterfaceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific vendor with a specific class of interfaces.
+ *
+ * This is especially useful when explicitly matching devices that have
+ * vendor specific bDeviceClass values, but standards-compliant interfaces.
+ */
+#define USB_VENDOR_AND_INTERFACE_INFO(vend, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+		| USB_DEVICE_ID_MATCH_VENDOR, \
+	.idVendor = (vend), \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr)
+
 /* ----------------------------------------------------------------------- */
 
 /* Stuff for dynamic usb ids */

[ 16/95] USB: support the new interfaces of Huawei Data Card devices in option driver

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: fangxiaozhi <huananhu@huawei.com>

commit ee6f827df9107139e8960326e49e1376352ced4d upstream.

In this patch, we add new declarations into option.c to support the new
interfaces of Huawei Data Card devices. And at the same time, remove the
redundant declarations from option.c.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |  279 +++++++++++++++++--------------------------
 1 file changed, 111 insertions(+), 168 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 08ff9b8..b093886 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -80,85 +80,9 @@ static void option_instat_callback(struct urb *urb);
 #define OPTION_PRODUCT_GTM380_MODEM		0x7201
 
 #define HUAWEI_VENDOR_ID			0x12D1
-#define HUAWEI_PRODUCT_E600			0x1001
-#define HUAWEI_PRODUCT_E220			0x1003
-#define HUAWEI_PRODUCT_E220BIS			0x1004
-#define HUAWEI_PRODUCT_E1401			0x1401
-#define HUAWEI_PRODUCT_E1402			0x1402
-#define HUAWEI_PRODUCT_E1403			0x1403
-#define HUAWEI_PRODUCT_E1404			0x1404
-#define HUAWEI_PRODUCT_E1405			0x1405
-#define HUAWEI_PRODUCT_E1406			0x1406
-#define HUAWEI_PRODUCT_E1407			0x1407
-#define HUAWEI_PRODUCT_E1408			0x1408
-#define HUAWEI_PRODUCT_E1409			0x1409
-#define HUAWEI_PRODUCT_E140A			0x140A
-#define HUAWEI_PRODUCT_E140B			0x140B
-#define HUAWEI_PRODUCT_E140C			0x140C
-#define HUAWEI_PRODUCT_E140D			0x140D
-#define HUAWEI_PRODUCT_E140E			0x140E
-#define HUAWEI_PRODUCT_E140F			0x140F
-#define HUAWEI_PRODUCT_E1410			0x1410
-#define HUAWEI_PRODUCT_E1411			0x1411
-#define HUAWEI_PRODUCT_E1412			0x1412
-#define HUAWEI_PRODUCT_E1413			0x1413
-#define HUAWEI_PRODUCT_E1414			0x1414
-#define HUAWEI_PRODUCT_E1415			0x1415
-#define HUAWEI_PRODUCT_E1416			0x1416
-#define HUAWEI_PRODUCT_E1417			0x1417
-#define HUAWEI_PRODUCT_E1418			0x1418
-#define HUAWEI_PRODUCT_E1419			0x1419
-#define HUAWEI_PRODUCT_E141A			0x141A
-#define HUAWEI_PRODUCT_E141B			0x141B
-#define HUAWEI_PRODUCT_E141C			0x141C
-#define HUAWEI_PRODUCT_E141D			0x141D
-#define HUAWEI_PRODUCT_E141E			0x141E
-#define HUAWEI_PRODUCT_E141F			0x141F
-#define HUAWEI_PRODUCT_E1420			0x1420
-#define HUAWEI_PRODUCT_E1421			0x1421
-#define HUAWEI_PRODUCT_E1422			0x1422
-#define HUAWEI_PRODUCT_E1423			0x1423
-#define HUAWEI_PRODUCT_E1424			0x1424
-#define HUAWEI_PRODUCT_E1425			0x1425
-#define HUAWEI_PRODUCT_E1426			0x1426
-#define HUAWEI_PRODUCT_E1427			0x1427
-#define HUAWEI_PRODUCT_E1428			0x1428
-#define HUAWEI_PRODUCT_E1429			0x1429
-#define HUAWEI_PRODUCT_E142A			0x142A
-#define HUAWEI_PRODUCT_E142B			0x142B
-#define HUAWEI_PRODUCT_E142C			0x142C
-#define HUAWEI_PRODUCT_E142D			0x142D
-#define HUAWEI_PRODUCT_E142E			0x142E
-#define HUAWEI_PRODUCT_E142F			0x142F
-#define HUAWEI_PRODUCT_E1430			0x1430
-#define HUAWEI_PRODUCT_E1431			0x1431
-#define HUAWEI_PRODUCT_E1432			0x1432
-#define HUAWEI_PRODUCT_E1433			0x1433
-#define HUAWEI_PRODUCT_E1434			0x1434
-#define HUAWEI_PRODUCT_E1435			0x1435
-#define HUAWEI_PRODUCT_E1436			0x1436
-#define HUAWEI_PRODUCT_E1437			0x1437
-#define HUAWEI_PRODUCT_E1438			0x1438
-#define HUAWEI_PRODUCT_E1439			0x1439
-#define HUAWEI_PRODUCT_E143A			0x143A
-#define HUAWEI_PRODUCT_E143B			0x143B
-#define HUAWEI_PRODUCT_E143C			0x143C
-#define HUAWEI_PRODUCT_E143D			0x143D
-#define HUAWEI_PRODUCT_E143E			0x143E
-#define HUAWEI_PRODUCT_E143F			0x143F
 #define HUAWEI_PRODUCT_K4505			0x1464
 #define HUAWEI_PRODUCT_K3765			0x1465
-#define HUAWEI_PRODUCT_E14AC			0x14AC
-#define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
-#define HUAWEI_PRODUCT_K5005			0x14C8
-#define HUAWEI_PRODUCT_K3770			0x14C9
-#define HUAWEI_PRODUCT_K3771			0x14CA
-#define HUAWEI_PRODUCT_K4510			0x14CB
-#define HUAWEI_PRODUCT_K4511			0x14CC
-#define HUAWEI_PRODUCT_ETS1220			0x1803
-#define HUAWEI_PRODUCT_E353			0x1506
-#define HUAWEI_PRODUCT_E173S			0x1C05
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -615,104 +539,123 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x32) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x31) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x32) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) },  /* E398 3G Modem */
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) },  /* E398 3G PC UI Interface */
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) },  /* E398 3G Application Interface */
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) },
+
+
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },

[ 17/95] usb: serial: mos7840: Fixup mos7840_chars_in_buffer()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Ferrell <mferrell@uplogix.com>

commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream.

 * Use the buffer content length as opposed to the total buffer size.  This can
   be a real problem when using the mos7840 as a usb serial-console as all
   kernel output is truncated during boot.

Signed-off-by: Mark Ferrell <mferrell@uplogix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/mos7840.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1191,9 +1191,12 @@ static int mos7840_chars_in_buffer(struc
 	}
 
 	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-	for (i = 0; i < NUM_URBS; ++i)
-		if (mos7840_port->busy[i])
-			chars += URB_TRANSFER_BUFFER_SIZE;
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7840_port->busy[i]) {
+			struct urb *urb = mos7840_port->write_urb_pool[i];
+			chars += urb->transfer_buffer_length;
+		}
+	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 	dbg("%s - returns %d", __func__, chars);
 	return chars;

[ 18/95] usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

commit b1b552a69b8805e7e338074a9e8b670b4a795218 upstream.

This patch fixes an issue introduced by patch:

    72c973d usb: gadget: add usb_endpoint_descriptor to struct usb_ep

Without this patch we see a kworker taking 100% CPU, after this sequence:

- Connect gadget to a windows host
- load g_ether
- ifconfig up <ip>; ifconfig down; ifconfig up
- ping <windows host>

The "ifconfig down" results in calling eth_stop(), which will call
usb_ep_disable() and, if the carrier is still ok, usb_ep_enable():

         usb_ep_disable(link->in_ep);
         usb_ep_disable(link->out_ep);
         if (netif_carrier_ok(net)) {
                 usb_ep_enable(link->in_ep);
                 usb_ep_enable(link->out_ep);
         }

The ep should stay enabled, but will not, as ep_disable set the desc
pointer to NULL, therefore the subsequent ep_enable will fail. This leads
to permanent rescheduling of the eth_work() worker as usb_ep_queue()
(called by the worker) will fail due to the unconfigured endpoint.

We fix this issue by saving the ep descriptors and re-assign them before
usb_ep_enable().

Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/gadget/u_ether.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 90e82e2..0e52309 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -669,6 +669,8 @@ static int eth_stop(struct net_device *net)
 	spin_lock_irqsave(&dev->lock, flags);
 	if (dev->port_usb) {
 		struct gether	*link = dev->port_usb;
+		const struct usb_endpoint_descriptor *in;
+		const struct usb_endpoint_descriptor *out;
 
 		if (link->close)
 			link->close(link);
@@ -682,10 +684,14 @@ static int eth_stop(struct net_device *net)
 		 * their own pace; the network stack can handle old packets.
 		 * For the moment we leave this here, since it works.
 		 */
+		in = link->in_ep->desc;
+		out = link->out_ep->desc;
 		usb_ep_disable(link->in_ep);
 		usb_ep_disable(link->out_ep);
 		if (netif_carrier_ok(net)) {
 			DBG(dev, "host still using in/out endpoints\n");
+			link->in_ep->desc = in;
+			link->out_ep->desc = out;
 			usb_ep_enable(link->in_ep);
 			usb_ep_enable(link->out_ep);
 		}

[ 19/95] ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 3d9fb0038a9b02febb01efc79a4a5d97f1822a90 upstream.

VFPv4 support depends on the VFPv3 context save/restore code, so only
advertise support in the hwcaps if the kernel can actually handle it.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/vfp/vfpmodule.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index fb849d0..c834b32 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -719,8 +719,10 @@ static int __init vfp_init(void)
 			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
 				elf_hwcap |= HWCAP_NEON;
 #endif
+#ifdef CONFIG_VFPv3
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+#endif
 		}
 	}
 	return 0;

[ 20/95] ARM: 7488/1: mm: use 5 bits for swapfile type encoding

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit f5f2025ef3e2cdb593707cbf87378761f17befbe upstream.

Page migration encodes the pfn in the offset field of a swp_entry_t.
For LPAE, we support physical addresses of up to 36 bits (due to
sparsemem limitations with the size of page flags), requiring 24 bits
to represent a pfn. A further 3 bits are used to encode a swp_entry into
a pte, leaving 5 bits for the type field. Furthermore, the core code
defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not
get used.

This patch reduces the width of the type field to 5 bits, allowing us
to create up to 31 swapfiles of 64GB each.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/include/asm/pgtable.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index d88f9f0..41dc31f 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -253,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
+ *   <--------------- offset ----------------------> < type -> 0 0 0
  *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 

[ 21/95] ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 730a8128cd8978467eb1cf546b11014acb57d433 upstream.

Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum
 #720789") added workarounds for erratum #720789 to the range TLB
invalidation functions with the observation that the erratum only
affects SMP platforms. However, when running an SMP_ON_UP kernel on a
uniprocessor platform we must take care to preserve the ASID as the
workaround is not required.

This patch ensures that we don't set the ASID to 0 when flushing the TLB
on such a system, preserving the original behaviour with the workaround
disabled.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/mm/tlb-v7.S |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index c202113..ea94765 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	dsb
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
-#ifdef CONFIG_ARM_ERRATA_720789
-	mov	r3, #0
-#else
 	asid	r3, r3				@ mask ASID
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(W(mov)	r3, #0	)
+	ALT_UP(W(nop)		)
 #endif
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT

[ 22/95] drm/i915: ignore eDP bpc settings from vbt

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 4344b813f105a19f793f1fd93ad775b784648b95 upstream.

This has originally been introduced to not oversubscribe the dp links
in

commit 885a5fb5b120a5c7e0b3baad7b0feb5a89f76c18
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Tue Jan 12 05:38:31 2010 +0800

    drm/i915: fix pixel color depth setting on eDP

Since then we've fixed up the dp link bandwidth calculation code and
should now automatically fall back to 6bpc dithering. So this is
unnecessary.

Furthermore it seems to break the new MacbookPro with retina display,
hence let's just rip this out.

Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Cc: Benoit Gschwind <gschwind@gnu-log.net>
Cc: Francois Rigaut <frigaut@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Tested-by: Bernhard Froemel <froemel at vmars tuwien.ac.at>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

--

Testing feedback highgly welcome, and thanks for Benoit for finding
out that the bpc computations are busted.
-Daniel
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_display.c |   11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 88913a4..a69a3d0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3754,17 +3754,6 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			continue;
 		}
 
-		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
-			/* Use VBT settings if we have an eDP panel */
-			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
-
-			if (edp_bpc < display_bpc) {
-				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
-				display_bpc = edp_bpc;
-			}
-			continue;
-		}
-
 		/* Not one of the known troublemakers, check the EDID */
 		list_for_each_entry(connector, &dev->mode_config.connector_list,
 				    head) {

[ 23/95] ALSA: hda - fix Copyright debug message

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Xingchao <xingchao.wang@intel.com>

commit 088c820b732dbfd515fc66d459d5f5777f79b406 upstream.

As spec said, 1 indicates no copyright is asserted.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/hda_proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 7e46258..6894ec6 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -412,7 +412,7 @@ static void print_digital_conv(struct snd_info_buffer *buffer,
 	if (digi1 & AC_DIG1_EMPHASIS)
 		snd_iprintf(buffer, " Preemphasis");
 	if (digi1 & AC_DIG1_COPYRIGHT)
-		snd_iprintf(buffer, " Copyright");
+		snd_iprintf(buffer, " Non-Copyright");
 	if (digi1 & AC_DIG1_NONAUDIO)
 		snd_iprintf(buffer, " Non-Audio");
 	if (digi1 & AC_DIG1_PROFESSIONAL)

[ 24/95] sched: fix divide by zero at {thread_group,task}_times

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e upstream.

On architectures where cputime_t is 64 bit type, is possible to trigger
divide by zero on do_div(temp, (__force u32) total) line, if total is a
non zero number but has lower 32 bit's zeroed. Removing casting is not
a good solution since some do_div() implementations do cast to u32
internally.

This problem can be triggered in practice on very long lived processes:

  PID: 2331   TASK: ffff880472814b00  CPU: 2   COMMAND: "oraagent.bin"
   #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b
   #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2
   #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00
   #3 [ffff880472a51cd0] die at ffffffff8100f26b
   #4 [ffff880472a51d00] do_trap at ffffffff814f03f4
   #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff
   #6 [ffff880472a51e00] divide_error at ffffffff8100be7b
      [exception RIP: thread_group_times+0x56]
      RIP: ffffffff81056a16  RSP: ffff880472a51eb8  RFLAGS: 00010046
      RAX: bc3572c9fe12d194  RBX: ffff880874150800  RCX: 0000000110266fad
      RDX: 0000000000000000  RSI: ffff880472a51eb8  RDI: 001038ae7d9633dc
      RBP: ffff880472a51ef8   R8: 00000000b10a3a64   R9: ffff880874150800
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: ffff880472a51f08
      R13: ffff880472a51f10  R14: 0000000000000000  R15: 0000000000000007
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
   #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d
   #8 [ffff880472a51f40] sys_times at ffffffff81088524
   #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2
      RIP: 0000003808caac3a  RSP: 00007fcba27ab6d8  RFLAGS: 00000202
      RAX: 0000000000000064  RBX: ffffffff8100b0f2  RCX: 0000000000000000
      RDX: 00007fcba27ab6e0  RSI: 000000000076d58e  RDI: 00007fcba27ab6e0
      RBP: 00007fcba27ab700   R8: 0000000000000020   R9: 000000000000091b
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: 00007fff9ca41940
      R13: 0000000000000000  R14: 00007fcba27ac9c0  R15: 00007fff9ca41940
      ORIG_RAX: 0000000000000064  CS: 0033  SS: 002b

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2:
 - Adjust filename
 - Most conversions in the original code are implicit]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/sched/core.c |   34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4355,6 +4355,20 @@ void thread_group_times(struct task_stru
 # define nsecs_to_cputime(__nsecs)	nsecs_to_jiffies(__nsecs)
 #endif
 
+static cputime_t scale_utime(cputime_t utime, cputime_t rtime, cputime_t total)
+{
+	u64 temp = (__force u64) rtime;
+
+	temp *= (__force u64) utime;
+
+	if (sizeof(cputime_t) == 4)
+		temp = div_u64(temp, (__force u32) total);
+	else
+		temp = div64_u64(temp, (__force u64) total);
+
+	return (__force cputime_t) temp;
+}
+
 void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 {
 	cputime_t rtime, utime = p->utime, total = cputime_add(utime, p->stime);
@@ -4364,13 +4378,9 @@ void task_times(struct task_struct *p, c
 	 */
 	rtime = nsecs_to_cputime(p->se.sum_exec_runtime);
 
-	if (total) {
-		u64 temp = rtime;
-
-		temp *= utime;
-		do_div(temp, total);
-		utime = (cputime_t)temp;
-	} else
+	if (total)
+		utime = scale_utime(utime, rtime, total);
+	else
 		utime = rtime;
 
 	/*
@@ -4397,13 +4407,9 @@ void thread_group_times(struct task_stru
 	total = cputime_add(cputime.utime, cputime.stime);
 	rtime = nsecs_to_cputime(cputime.sum_exec_runtime);
 
-	if (total) {
-		u64 temp = rtime;
-
-		temp *= cputime.utime;
-		do_div(temp, total);
-		utime = (cputime_t)temp;
-	} else
+	if (total)
+		utime = scale_utime(cputime.utime, rtime, total);
+	else
 		utime = rtime;
 
 	sig->prev_utime = max(sig->prev_utime, utime);

[ 25/95] mutex: Place lock in contended state after fastpath_lock failure

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 0bce9c46bf3b15f485d82d7e81dabed6ebcc24b1 upstream.

ARM recently moved to asm-generic/mutex-xchg.h for its mutex
implementation after the previous implementation was found to be missing
some crucial memory barriers. However, this has revealed some problems
running hackbench on SMP platforms due to the way in which the
MUTEX_SPIN_ON_OWNER code operates.

The symptoms are that a bunch of hackbench tasks are left waiting on an
unlocked mutex and therefore never get woken up to claim it. This boils
down to the following sequence of events:

        Task A        Task B        Task C        Lock value
0                                                     1
1       lock()                                        0
2                     lock()                          0
3                     spin(A)                         0
4       unlock()                                      1
5                                   lock()            0
6                     cmpxchg(1,0)                    0
7                     contended()                    -1
8       lock()                                        0
9       spin(C)                                       0
10                                  unlock()          1
11      cmpxchg(1,0)                                  0
12      unlock()                                      1

At this point, the lock is unlocked, but Task B is in an uninterruptible
sleep with nobody to wake it up.

This patch fixes the problem by ensuring we put the lock into the
contended state if we fail to acquire it on the fastpath, ensuring that
any blocked waiters are woken up when the mutex is released.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/asm-generic/mutex-xchg.h |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
index 580a6d3..c04e0db 100644
--- a/include/asm-generic/mutex-xchg.h
+++ b/include/asm-generic/mutex-xchg.h
@@ -26,7 +26,13 @@ static inline void
 __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
 	if (unlikely(atomic_xchg(count, 0) != 1))
-		fail_fn(count);
+		/*
+		 * We failed to acquire the lock, so mark it contended
+		 * to ensure that any waiting tasks are woken up by the
+		 * unlock slow path.
+		 */
+		if (likely(atomic_xchg(count, -1) != 1))
+			fail_fn(count);
 }
 
 /**
@@ -43,7 +49,8 @@ static inline int
 __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
 {
 	if (unlikely(atomic_xchg(count, 0) != 1))
-		return fail_fn(count);
+		if (likely(atomic_xchg(count, -1) != 1))
+			return fail_fn(count);
 	return 0;
 }
 

Re: [ 25/95] mutex: Place lock in contended state after fastpath_lock failure

[Nicolas Pitre]

On Sun, 9 Sep 2012, Ben Hutchings wrote:

> 3.2-stable review patch.  If anyone has any objections, please let me know.

Once you have this patch included, could you pick up commit a76d7bd96d 
as well please?

Thanks.

> ------------------
> 
> From: Will Deacon <will.deacon@arm.com>
> 
> commit 0bce9c46bf3b15f485d82d7e81dabed6ebcc24b1 upstream.
> 
> ARM recently moved to asm-generic/mutex-xchg.h for its mutex
> implementation after the previous implementation was found to be missing
> some crucial memory barriers. However, this has revealed some problems
> running hackbench on SMP platforms due to the way in which the
> MUTEX_SPIN_ON_OWNER code operates.
> 
> The symptoms are that a bunch of hackbench tasks are left waiting on an
> unlocked mutex and therefore never get woken up to claim it. This boils
> down to the following sequence of events:
> 
>         Task A        Task B        Task C        Lock value
> 0                                                     1
> 1       lock()                                        0
> 2                     lock()                          0
> 3                     spin(A)                         0
> 4       unlock()                                      1
> 5                                   lock()            0
> 6                     cmpxchg(1,0)                    0
> 7                     contended()                    -1
> 8       lock()                                        0
> 9       spin(C)                                       0
> 10                                  unlock()          1
> 11      cmpxchg(1,0)                                  0
> 12      unlock()                                      1
> 
> At this point, the lock is unlocked, but Task B is in an uninterruptible
> sleep with nobody to wake it up.
> 
> This patch fixes the problem by ensuring we put the lock into the
> contended state if we fail to acquire it on the fastpath, ensuring that
> any blocked waiters are woken up when the mutex is released.
> 
> Signed-off-by: Will Deacon <will.deacon@arm.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Chris Mason <chris.mason@fusionio.com>
> Cc: Ingo Molnar <mingo@elte.hu>
> Reviewed-by: Nicolas Pitre <nico@linaro.org>
> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  include/asm-generic/mutex-xchg.h |   11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
> index 580a6d3..c04e0db 100644
> --- a/include/asm-generic/mutex-xchg.h
> +++ b/include/asm-generic/mutex-xchg.h
> @@ -26,7 +26,13 @@ static inline void
>  __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
>  {
>  	if (unlikely(atomic_xchg(count, 0) != 1))
> -		fail_fn(count);
> +		/*
> +		 * We failed to acquire the lock, so mark it contended
> +		 * to ensure that any waiting tasks are woken up by the
> +		 * unlock slow path.
> +		 */
> +		if (likely(atomic_xchg(count, -1) != 1))
> +			fail_fn(count);
>  }
>  
>  /**
> @@ -43,7 +49,8 @@ static inline int
>  __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
>  {
>  	if (unlikely(atomic_xchg(count, 0) != 1))
> -		return fail_fn(count);
> +		if (likely(atomic_xchg(count, -1) != 1))
> +			return fail_fn(count);
>  	return 0;
>  }
>  
> 
> 

Re: [ 25/95] mutex: Place lock in contended state after fastpath_lock failure

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 438 bytes --]

On Sun, 2012-09-09 at 19:34 -0400, Nicolas Pitre wrote:
> On Sun, 9 Sep 2012, Ben Hutchings wrote:
> 
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> Once you have this patch included, could you pick up commit a76d7bd96d 
> as well please?
[...]

That was already applied in 3.2.27.

Ben.

-- 
Ben Hutchings
Make three consecutive correct guesses and you will be considered an expert.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

[ 26/95] ath9k: fix decrypt_error initialization in ath_rx_tasklet()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>

commit e1352fde5682ab1bdd2a9e5d75c22d1fe210ef77 upstream.

ath_rx_tasklet() calls ath9k_rx_skb_preprocess() and ath9k_rx_skb_postprocess()
in a loop over the received frames. The decrypt_error flag is
initialized to false
just outside ath_rx_tasklet() loop. ath9k_rx_accept(), called by
ath9k_rx_skb_preprocess(),
only sets decrypt_error to true and never to false.
Then ath_rx_tasklet() calls ath9k_rx_skb_postprocess() and passes
decrypt_error to it.
So, after a decryption error, in ath9k_rx_skb_postprocess(), we can
have a leftover value
from another processed frame. In that case, the frame will not be marked with
RX_FLAG_DECRYPTED even if it is decrypted correctly.
When using CCMP encryption this issue can lead to connection stuck
because of CCMP
PN corruption and a waste of CPU time since mac80211 tries to decrypt an already
deciphered frame with ieee80211_aes_ccm_decrypt.
Fix the issue initializing decrypt_error flag at the begging of the
ath_rx_tasklet() loop.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/ath/ath9k/recv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1782,7 +1782,6 @@ int ath_rx_tasklet(struct ath_softc *sc,
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_hdr *hdr;
 	int retval;
-	bool decrypt_error = false;
 	struct ath_rx_status rs;
 	enum ath9k_rx_qtype qtype;
 	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
@@ -1804,6 +1803,7 @@ int ath_rx_tasklet(struct ath_softc *sc,
 	tsf_lower = tsf & 0xffffffff;
 
 	do {
+		bool decrypt_error = false;
 		/* If handling rx interrupt and flush is in progress => exit */
 		if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0))
 			break;

[ 27/95] drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Bumiller <e0425955@student.tuwien.ac.at>

commit af5e7d84b0ec45b2b614b0d6e3657cbdceaa21f9 upstream.

Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
[bwh: Backported to 3.2: register value is in the local 'data' variable]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/nouveau/nvd0_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvd0_display.c
+++ b/drivers/gpu/drm/nouveau/nvd0_display.c
@@ -472,7 +472,7 @@ static int
 nvd0_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 {
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
-	const u32 data = (y << 16) | x;
+	const u32 data = (y << 16) | (x & 0xffff);
 
 	nv_wr32(crtc->dev, 0x64d084 + (nv_crtc->index * 0x1000), data);
 	nv_wr32(crtc->dev, 0x64d080 + (nv_crtc->index * 0x1000), 0x00000000);

[ 28/95] drm/i915: reorder edp disabling to fix ivb MacBook Air

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 upstream.

eDP is tons of fun. It turns out that at least the new MacBook Air 5,1
model absolutely doesn't like the new force vdd dance we've introduced
in

commit 6cb49835da0426f69a2931bc2a0a8156344b0e41
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

But that patch also tried to fix some neat edp sequence issue with the
force_vdd timings. Closer inspection reveals that we've raised
force_vdd only to do the aux channel communication dp_sink_dpms. If we
move the edp_panel_off below that, we don't need any force_vdd for the
disable sequence, which makes the Air happy.

Unfortunately the reporter of the original bug that the above commit
fixed is travelling, so we can't test whether this regresses things.
But my theory is that since we don't check for any power-off ->
force_vdd-on delays in edp_panel_vdd_on, this was the actual
root-cause of this failure. With that force_vdd dance completely
eliminated, I'm hopeful the original bug stays fixed, too.

For reference the old bug, which hopefully doesn't get broken by this:

https://bugzilla.kernel.org/show_bug.cgi?id=43163

In any case, regression fixers win over plain bugfixes, so this needs
to go in asap.

v2: The crucial pieces seems to be to clear the force_vdd flag
uncoditionally, too, in edp_panel_off. Looks like this is left behind
by the firmware somehow.

v3: The Apple firmware seems to switch off the panel on it's own, hence
we still need to keep force_vdd on, but properly clear it when switching
the panel off.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671
Tested-by: Roberto Romer <sildurin@gmail.com>
Tested-by: Daniel Wagner <wagi@monom.org>
Tested-by: Keith Packard <keithp@keithp.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_dp.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0a56b9a..a6c426a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1174,10 +1174,14 @@ static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
 
 	pp = ironlake_get_pp_control(dev_priv);
-	pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_BLC_ENABLE);
+	/* We need to switch off panel power _and_ force vdd, for otherwise some
+	 * panels get very unhappy and cease to work. */
+	pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
 
+	intel_dp->want_panel_vdd = false;
+
 	ironlake_wait_panel_off(intel_dp);
 }
 
@@ -1287,11 +1291,9 @@ static void intel_dp_prepare(struct drm_encoder *encoder)
 	 * ensure that we have vdd while we switch off the panel. */
 	ironlake_edp_panel_vdd_on(intel_dp);
 	ironlake_edp_backlight_off(intel_dp);
-	ironlake_edp_panel_off(intel_dp);
-
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	ironlake_edp_panel_off(intel_dp);
 	intel_dp_link_down(intel_dp);
-	ironlake_edp_panel_vdd_off(intel_dp, false);
 }
 
 static void intel_dp_commit(struct drm_encoder *encoder)
@@ -1326,11 +1328,9 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 		/* Switching the panel off requires vdd. */
 		ironlake_edp_panel_vdd_on(intel_dp);
 		ironlake_edp_backlight_off(intel_dp);
-		ironlake_edp_panel_off(intel_dp);
-
 		intel_dp_sink_dpms(intel_dp, mode);
+		ironlake_edp_panel_off(intel_dp);
 		intel_dp_link_down(intel_dp);
-		ironlake_edp_panel_vdd_off(intel_dp, false);
 
 		if (is_cpu_edp(intel_dp))
 			ironlake_edp_pll_off(encoder);

[ 29/95] audit: dont free_chunk() after fsnotify_add_mark()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit 0fe33aae0e94b4097dd433c9399e16e17d638cd8 upstream.

Don't do free_chunk() after fsnotify_add_mark().  That one does a delayed unref
via the destroy list and this results in use-after-free.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/audit_tree.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 3a5ca58..69a5851 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -259,7 +259,7 @@ static void untag_chunk(struct node *p)
 
 	fsnotify_duplicate_mark(&new->mark, entry);
 	if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) {
-		free_chunk(new);
+		fsnotify_put_mark(&new->mark);
 		goto Fallback;
 	}
 
@@ -322,7 +322,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree)
 
 	entry = &chunk->mark;
 	if (fsnotify_add_mark(entry, audit_tree_group, inode, NULL, 0)) {
-		free_chunk(chunk);
+		fsnotify_put_mark(entry);
 		return -ENOSPC;
 	}
 
@@ -396,7 +396,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
 	fsnotify_duplicate_mark(chunk_entry, old_entry);
 	if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, NULL, 1)) {
 		spin_unlock(&old_entry->lock);
-		free_chunk(chunk);
+		fsnotify_put_mark(chunk_entry);
 		fsnotify_put_mark(old_entry);
 		return -ENOSPC;
 	}

[ 30/95] audit: fix refcounting in audit-tree

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit a2140fc0cb0325bb6384e788edd27b9a568714e2 upstream.

Refcounting of fsnotify_mark in audit tree is broken.  E.g:

                              refcount
create_chunk
  alloc_chunk                 1
  fsnotify_add_mark           2

untag_chunk
  fsnotify_get_mark           3
  fsnotify_destroy_mark
    audit_tree_freeing_mark   2
  fsnotify_put_mark           1
  fsnotify_put_mark           0
  via destroy_list
    fsnotify_mark_destroy    -1

This was reported by various people as triggering Oops when stopping auditd.

We could just remove the put_mark from audit_tree_freeing_mark() but that would
break freeing via inode destruction.  So this patch simply omits a put_mark
after calling destroy_mark or adds a get_mark before.

The additional get_mark is necessary where there's no other put_mark after
fsnotify_destroy_mark() since it assumes that the caller is holding a reference
(or the inode is keeping the mark pinned, not the case here AFAICS).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Valentin Avram <aval13@gmail.com>
Reported-by: Peter Moody <pmoody@google.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/audit_tree.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 69a5851..2b2ffff 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -250,7 +250,6 @@ static void untag_chunk(struct node *p)
 		spin_unlock(&hash_lock);
 		spin_unlock(&entry->lock);
 		fsnotify_destroy_mark(entry);
-		fsnotify_put_mark(entry);
 		goto out;
 	}
 
@@ -293,7 +292,6 @@ static void untag_chunk(struct node *p)
 	spin_unlock(&hash_lock);
 	spin_unlock(&entry->lock);
 	fsnotify_destroy_mark(entry);
-	fsnotify_put_mark(entry);
 	goto out;
 
 Fallback:
@@ -332,6 +330,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree)
 		spin_unlock(&hash_lock);
 		chunk->dead = 1;
 		spin_unlock(&entry->lock);
+		fsnotify_get_mark(entry);
 		fsnotify_destroy_mark(entry);
 		fsnotify_put_mark(entry);
 		return 0;
@@ -412,6 +411,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
 		spin_unlock(&chunk_entry->lock);
 		spin_unlock(&old_entry->lock);
 
+		fsnotify_get_mark(chunk_entry);
 		fsnotify_destroy_mark(chunk_entry);
 
 		fsnotify_put_mark(chunk_entry);
@@ -445,7 +445,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree)
 	spin_unlock(&old_entry->lock);
 	fsnotify_destroy_mark(old_entry);
 	fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */
-	fsnotify_put_mark(old_entry); /* and kill it */
 	return 0;
 }
 

[ 31/95] vfs: canonicalize create mode in build_open_flags()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit e68726ff72cf7ba5e7d789857fcd9a75ca573f03 upstream.

Userspace can pass weird create mode in open(2) that we canonicalize to
"(mode & S_IALLUGO) | S_IFREG" in vfs_create().

The problem is that we use the uncanonicalized mode before calling vfs_create()
with unforseen consequences.

So do the canonicalization early in build_open_flags().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/open.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/open.c b/fs/open.c
index bc132e1..e1f2cdb 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -852,9 +852,10 @@ static inline int build_open_flags(int flags, umode_t mode, struct open_flags *o
 	int lookup_flags = 0;
 	int acc_mode;
 
-	if (!(flags & O_CREAT))
-		mode = 0;
-	op->mode = mode;
+	if (flags & O_CREAT)
+		op->mode = (mode & S_IALLUGO) | S_IFREG;
+	else
+		op->mode = 0;
 
 	/* Must never be set by userspace */
 	flags &= ~FMODE_NONOTIFY;

[ 32/95] PCI: EHCI: Fix crash during hibernation on ASUS computers

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rjw@sisk.pl>

commit 0b68c8e2c3afaf9807eb1ebe0ccfb3b809570aa4 upstream.

Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS
computers) added a workaround for an ASUS suspend issue related to
USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut
down the EHCI controller during system suspend if its PCI command
register doesn't contain 0 at that time.

It turns out that the same workaround is necessary in the analogous
hibernation code path, so add it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=45811
Reported-and-tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/pci/pci-driver.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 185be37..5270f1a 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -959,6 +959,13 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 	if (!pci_dev->state_saved && !pci_is_bridge(pci_dev))
 		pci_prepare_to_sleep(pci_dev);
 
+	/*
+	 * The reason for doing this here is the same as for the analogous code
+	 * in pci_pm_suspend_noirq().
+	 */
+	if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
 	return 0;
 }
 

[ 33/95] IB/srp: Fix a race condition

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bvanassche@acm.org>

commit 220329916c72ee3d54ae7262b215a050f04a18fc upstream.

Avoid a crash caused by the scmnd->scsi_done(scmnd) call in
srp_process_rsp() being invoked with scsi_done == NULL.  This can
happen if a reply is received during or after a command abort.

Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au>
Reference: http://marc.info/?l=linux-rdma&m=134314367801595
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/infiniband/ulp/srp/ib_srp.c |   87 +++++++++++++++++++++++++----------
 1 file changed, 63 insertions(+), 24 deletions(-)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index bcbf22e..1b5b0c7 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -586,24 +586,62 @@ static void srp_unmap_data(struct scsi_cmnd *scmnd,
 			scmnd->sc_data_direction);
 }
 
-static void srp_remove_req(struct srp_target_port *target,
-			   struct srp_request *req, s32 req_lim_delta)
+/**
+ * srp_claim_req - Take ownership of the scmnd associated with a request.
+ * @target: SRP target port.
+ * @req: SRP request.
+ * @scmnd: If NULL, take ownership of @req->scmnd. If not NULL, only take
+ *         ownership of @req->scmnd if it equals @scmnd.
+ *
+ * Return value:
+ * Either NULL or a pointer to the SCSI command the caller became owner of.
+ */
+static struct scsi_cmnd *srp_claim_req(struct srp_target_port *target,
+				       struct srp_request *req,
+				       struct scsi_cmnd *scmnd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&target->lock, flags);
+	if (!scmnd) {
+		scmnd = req->scmnd;
+		req->scmnd = NULL;
+	} else if (req->scmnd == scmnd) {
+		req->scmnd = NULL;
+	} else {
+		scmnd = NULL;
+	}
+	spin_unlock_irqrestore(&target->lock, flags);
+
+	return scmnd;
+}
+
+/**
+ * srp_free_req() - Unmap data and add request to the free request list.
+ */
+static void srp_free_req(struct srp_target_port *target,
+			 struct srp_request *req, struct scsi_cmnd *scmnd,
+			 s32 req_lim_delta)
 {
 	unsigned long flags;
 
-	srp_unmap_data(req->scmnd, target, req);
+	srp_unmap_data(scmnd, target, req);
+
 	spin_lock_irqsave(&target->lock, flags);
 	target->req_lim += req_lim_delta;
-	req->scmnd = NULL;
 	list_add_tail(&req->list, &target->free_reqs);
 	spin_unlock_irqrestore(&target->lock, flags);
 }
 
 static void srp_reset_req(struct srp_target_port *target, struct srp_request *req)
 {
-	req->scmnd->result = DID_RESET << 16;
-	req->scmnd->scsi_done(req->scmnd);
-	srp_remove_req(target, req, 0);
+	struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL);
+
+	if (scmnd) {
+		scmnd->result = DID_RESET << 16;
+		scmnd->scsi_done(scmnd);
+		srp_free_req(target, req, scmnd, 0);
+	}
 }
 
 static int srp_reconnect_target(struct srp_target_port *target)
@@ -1073,11 +1111,18 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 		complete(&target->tsk_mgmt_done);
 	} else {
 		req = &target->req_ring[rsp->tag];
-		scmnd = req->scmnd;
-		if (!scmnd)
+		scmnd = srp_claim_req(target, req, NULL);
+		if (!scmnd) {
 			shost_printk(KERN_ERR, target->scsi_host,
 				     "Null scmnd for RSP w/tag %016llx\n",
 				     (unsigned long long) rsp->tag);
+
+			spin_lock_irqsave(&target->lock, flags);
+			target->req_lim += be32_to_cpu(rsp->req_lim_delta);
+			spin_unlock_irqrestore(&target->lock, flags);
+
+			return;
+		}
 		scmnd->result = rsp->status;
 
 		if (rsp->flags & SRP_RSP_FLAG_SNSVALID) {
@@ -1092,7 +1137,9 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 		else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER))
 			scsi_set_resid(scmnd, be32_to_cpu(rsp->data_in_res_cnt));
 
-		srp_remove_req(target, req, be32_to_cpu(rsp->req_lim_delta));
+		srp_free_req(target, req, scmnd,
+			     be32_to_cpu(rsp->req_lim_delta));
+
 		scmnd->host_scribble = NULL;
 		scmnd->scsi_done(scmnd);
 	}
@@ -1631,25 +1678,17 @@ static int srp_abort(struct scsi_cmnd *scmnd)
 {
 	struct srp_target_port *target = host_to_target(scmnd->device->host);
 	struct srp_request *req = (struct srp_request *) scmnd->host_scribble;
-	int ret = SUCCESS;
 
 	shost_printk(KERN_ERR, target->scsi_host, "SRP abort called\n");
 
-	if (!req || target->qp_in_error)
+	if (!req || target->qp_in_error || !srp_claim_req(target, req, scmnd))
 		return FAILED;
-	if (srp_send_tsk_mgmt(target, req->index, scmnd->device->lun,
-			      SRP_TSK_ABORT_TASK))
-		return FAILED;
-
-	if (req->scmnd) {
-		if (!target->tsk_mgmt_status) {
-			srp_remove_req(target, req, 0);
-			scmnd->result = DID_ABORT << 16;
-		} else
-			ret = FAILED;
-	}
+	srp_send_tsk_mgmt(target, req->index, scmnd->device->lun,
+			  SRP_TSK_ABORT_TASK);
+	srp_free_req(target, req, scmnd, 0);
+	scmnd->result = DID_ABORT << 16;
 
-	return ret;
+	return SUCCESS;
 }
 
 static int srp_reset_device(struct scsi_cmnd *scmnd)

[ 34/95] USB: option: add ZTE K5006-Z

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1478 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream.

The ZTE (Vodafone) K5006-Z use the following
interface layout:

00 DIAG
01 secondary
02 modem
03 networkcard
04 storage

Ignoring interface #3 which is handled by the qmi_wwan
driver.

Cc: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9930628..cc40f47 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,6 +886,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },

Re: [ 34/95] USB: option: add ZTE K5006-Z

[Thomas Schäfer]

Am Montag, 10. September 2012 um 00:42:24 schrieb Ben Hutchings:
> 3.2-stable review patch.  If anyone has any objections, please let me know.



referring to

http://www.spinics.net/lists/linux-usb/msg70131.html

it should not be done with ff ff ff


Thomas







> 
> ------------------
> 
> From: Bjørn Mork <bjorn@mork.no>
> 
> commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream.
> 
> The ZTE (Vodafone) K5006-Z use the following
> interface layout:
> 
> 00 DIAG
> 01 secondary
> 02 modem
> 03 networkcard
> 04 storage
> 
> Ignoring interface #3 which is handled by the qmi_wwan
> driver.
> 
> Cc: Thomas Schäfer <tschaefer@t-online.de>
> Signed-off-by: Bjørn Mork <bjorn@mork.no>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/usb/serial/option.c |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 9930628..cc40f47 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -886,6 +886,8 @@ static const struct usb_device_id option_ids[] = {
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 
0xff),
>  	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff)
> }, +	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff,
> 0xff), +	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff)
> }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff,
> 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff,
> 0xff, 0xff) },

Re: [ 34/95] USB: option: add ZTE K5006-Z

[Bjørn Mork]

Thomas Schäfer <tschaefer@t-online.de> writes:

> Am Montag, 10. September 2012 um 00:42:24 schrieb Ben Hutchings:
>> 3.2-stable review patch.  If anyone has any objections, please let me know.
>
>
>
> referring to
>
> http://www.spinics.net/lists/linux-usb/msg70131.html
>
> it should not be done with ff ff ff


Yes, sorry about not getting around to fixing that in time.  I've just
submitted a proposed fix.  But as my fix removes the bogus entry, you
may just as well go ahead and add this patch to stable so that the fixup
applies cleanly later. If accepted...



Bjørn
 
>> ------------------
>> 
>> From: Bjørn Mork <bjorn@mork.no>
>> 
>> commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream.
>> 
>> The ZTE (Vodafone) K5006-Z use the following
>> interface layout:
>> 
>> 00 DIAG
>> 01 secondary
>> 02 modem
>> 03 networkcard
>> 04 storage
>> 
>> Ignoring interface #3 which is handled by the qmi_wwan
>> driver.
>> 
>> Cc: Thomas Schäfer <tschaefer@t-online.de>
>> Signed-off-by: Bjørn Mork <bjorn@mork.no>
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
>> ---
>>  drivers/usb/serial/option.c |    2 ++
>>  1 file changed, 2 insertions(+)
>> 
>> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
>> index 9930628..cc40f47 100644
>> --- a/drivers/usb/serial/option.c
>> +++ b/drivers/usb/serial/option.c
>> @@ -886,6 +886,8 @@ static const struct usb_device_id option_ids[] = {
>>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 
> 0xff),
>>  	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
>>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff)
>> }, +	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff,
>> 0xff), +	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
>>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff)
>> }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff,
>> 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff,
>> 0xff, 0xff) },

Re: [ 34/95] USB: option: add ZTE K5006-Z

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 842 bytes --]

On Tue, 2012-09-11 at 09:43 +0200, Bjørn Mork wrote:
> Thomas Schäfer <tschaefer@t-online.de> writes:
> 
> > Am Montag, 10. September 2012 um 00:42:24 schrieb Ben Hutchings:
> >> 3.2-stable review patch.  If anyone has any objections, please let me know.
> >
> >
> >
> > referring to
> >
> > http://www.spinics.net/lists/linux-usb/msg70131.html
> >
> > it should not be done with ff ff ff
> 
> 
> Yes, sorry about not getting around to fixing that in time.  I've just
> submitted a proposed fix.  But as my fix removes the bogus entry, you
> may just as well go ahead and add this patch to stable so that the fixup
> applies cleanly later. If accepted...
[...]

If this addition is 'bogus' then I'll defer it.

Ben.

-- 
Ben Hutchings
Make three consecutive correct guesses and you will be considered an expert.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 34/95] USB: option: add ZTE K5006-Z

[Thomas Schäfer]

http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=commitdiff;h=ba9edaa468869a8cea242a411066b0f490751798

 index cc40f47..5ce88d1 100644 (file)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,8 +886,6 @@ static const struct usb_device_id option_ids[] = {
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
-       { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
-         .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1092,6 +1090,10 @@ static const struct usb_device_id option_ids[] = {
         .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
         .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+       { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+       { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+       { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
        { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
        { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
        { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */


I tested the new patch with linux-next-20120913

It works as expected, at least for the K5006-Z.

Sorry for the confusion I triggered. I have no clue about the best matching methods. My focus is on testing.


Thomas

Re: [ 34/95] USB: option: add ZTE K5006-Z

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2212 bytes --]

On Thu, 2012-09-13 at 17:22 +0200, Thomas Schäfer wrote:
> http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=commitdiff;h=ba9edaa468869a8cea242a411066b0f490751798

I've added this and the previous change to the queue for 3.2.

Ben.

>  index cc40f47..5ce88d1 100644 (file)
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -886,8 +886,6 @@ static const struct usb_device_id option_ids[] = {
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
>           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
> -       { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
> -         .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
> @@ -1092,6 +1090,10 @@ static const struct usb_device_id option_ids[] = {
>          .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
>          .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
> +       { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
> +       { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
> +       { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
> +
>         { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
>         { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
>         { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
> 
> 
> I tested the new patch with linux-next-20120913
> 
> It works as expected, at least for the K5006-Z.
> 
> Sorry for the confusion I triggered. I have no clue about the best
> matching methods. My focus is on testing.

-- 
Ben Hutchings
Experience is what causes a person to make new mistakes instead of old ones.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

[ 35/95] dccp: check ccid before dereferencing

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 276bdb82dedb290511467a5a4fdbe9f0b52dce6f upstream.

ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with
a NULL ccid pointer leading to a NULL pointer dereference. This could
lead to a privilege escalation if the attacker is able to map page 0 and
prepare it with a fake ccid_ops pointer.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/dccp/ccid.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h
index 75c3582..fb85d37 100644
--- a/net/dccp/ccid.h
+++ b/net/dccp/ccid.h
@@ -246,7 +246,7 @@ static inline int ccid_hc_rx_getsockopt(struct ccid *ccid, struct sock *sk,
 					u32 __user *optval, int __user *optlen)
 {
 	int rc = -ENOPROTOOPT;
-	if (ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL)
+	if (ccid != NULL && ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL)
 		rc = ccid->ccid_ops->ccid_hc_rx_getsockopt(sk, optname, len,
 						 optval, optlen);
 	return rc;
@@ -257,7 +257,7 @@ static inline int ccid_hc_tx_getsockopt(struct ccid *ccid, struct sock *sk,
 					u32 __user *optval, int __user *optlen)
 {
 	int rc = -ENOPROTOOPT;
-	if (ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL)
+	if (ccid != NULL && ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL)
 		rc = ccid->ccid_ops->ccid_hc_tx_getsockopt(sk, optname, len,
 						 optval, optlen);
 	return rc;

Re: [ 35/95] dccp: check ccid before dereferencing

[Mathias Krause]

Hi Ben,

On Mon, Sep 10, 2012 at 12:42 AM, Ben Hutchings <ben@decadent.org.uk> wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.

No objections, but could you please consider including the following
commits, too?:

  e862f1a atm: fix info leak in getsockopt(SO_ATMPVC)
  3c0c5cf atm: fix info leak via getsockname()
  e15ca9a Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER)
  3f68ba0 Bluetooth: HCI - Fix info leak via getsockname()
  9ad2de4 Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY)
  f9432c5 Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST)
  9344a97 Bluetooth: RFCOMM - Fix info leak via getsockname()
  792039c Bluetooth: L2CAP - Fix info leak via getsockname()
  04d4fbc l2tp: fix info leak via getsockname()
  3592aae llc: fix info leak via getsockname()
  7b07f8e dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO)
  2d8a041 ipvs: fix info leak in getsockopt(IP_VS_SO_GET_TIMEOUT)
  43da5f2 net: fix info leak in compat dev_ifconf()

Those were not CCed to stable but David wanted to queue them anyway. See

  http://marc.info/?l=linux-kernel&m=134509201708293&w=2


Thanks,
Mathias

Re: [ 35/95] dccp: check ccid before dereferencing

[David Miller]

From: Mathias Krause <minipli@googlemail.com>
Date: Mon, 10 Sep 2012 08:17:06 +0200

> Hi Ben,
> 
> On Mon, Sep 10, 2012 at 12:42 AM, Ben Hutchings <ben@decadent.org.uk> wrote:
>> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> No objections, but could you please consider including the following
> commits, too?:

They will be included when I next push my networking -stable queue to
the stable maintainers, and no sooner.

You never need to ask if and when a networking patch will be submitted
to stable, my pending queue is always available for you to inspect
here:

http://patchwork.ozlabs.org/bundle/davem/stable/?state=*

Re: [ 35/95] dccp: check ccid before dereferencing

[Mathias Krause]

On Mon, Sep 10, 2012 at 8:47 AM, David Miller <davem@davemloft.net> wrote:
> From: Mathias Krause <minipli@googlemail.com>
> Date: Mon, 10 Sep 2012 08:17:06 +0200
>
>> Hi Ben,
>>
>> On Mon, Sep 10, 2012 at 12:42 AM, Ben Hutchings <ben@decadent.org.uk> wrote:
>>> 3.2-stable review patch.  If anyone has any objections, please let me know.
>>
>> No objections, but could you please consider including the following
>> commits, too?:
>
> They will be included when I next push my networking -stable queue to
> the stable maintainers, and no sooner.
>
> You never need to ask if and when a networking patch will be submitted
> to stable, my pending queue is always available for you to inspect
> here:
>
> http://patchwork.ozlabs.org/bundle/davem/stable/?state=*

Thanks for clarifying this and the pointer to the queue! I wasn't aware of it.

Mathias

[ 36/95] md: Dont truncate size at 4TB for RAID0 and Linear

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.de>

commit 667a5313ecd7308d79629c0738b0db588b0b0a4e upstream.

commit 27a7b260f71439c40546b43588448faac01adb93
   md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.

changed 0.90 metadata handling to truncated size to 4TB as that is
all that 0.90 can record.
However for RAID0 and Linear, 0.90 doesn't need to record the size, so
this truncation is not needed and causes working arrays to become too small.

So avoid the truncation for RAID0 and Linear

This bug was introduced in 3.1 and is suitable for any stable kernels
from then onwards.
As the offending commit was tagged for 'stable', any stable kernel
that it was applied to should also get this patch.  That includes
at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for
providing that list).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/md/md.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index fcd0987..3f6203a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1108,8 +1108,11 @@ static int super_90_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor
 			ret = 0;
 	}
 	rdev->sectors = rdev->sb_start;
-	/* Limit to 4TB as metadata cannot record more than that */
-	if (rdev->sectors >= (2ULL << 32))
+	/* Limit to 4TB as metadata cannot record more than that.
+	 * (not needed for Linear and RAID0 as metadata doesn't
+	 * record this size)
+	 */
+	if (rdev->sectors >= (2ULL << 32) && sb->level >= 1)
 		rdev->sectors = (2ULL << 32) - 2;
 
 	if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1)
@@ -1400,7 +1403,7 @@ super_90_rdev_size_change(struct md_rdev *rdev, sector_t num_sectors)
 	/* Limit to 4TB as metadata cannot record more than that.
 	 * 4TB == 2^32 KB, or 2*2^32 sectors.
 	 */
-	if (num_sectors >= (2ULL << 32))
+	if (num_sectors >= (2ULL << 32) && rdev->mddev->level >= 1)
 		num_sectors = (2ULL << 32) - 2;
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);

[ 37/95] NFS: Alias the nfs module to nfs4

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "bjschuma@gmail.com" <bjschuma@gmail.com>

commit 425e776d93a7a5070b77d4f458a5bab0f924652c upstream.

This allows distros to remove the line from their modprobe
configuration.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/super.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -3087,4 +3087,6 @@ static struct dentry *nfs4_referral_moun
 	return res;
 }
 
+MODULE_ALIAS("nfs4");
+
 #endif /* CONFIG_NFS_V4 */

[ 38/95] target: fix NULL pointer dereference bug alloc_page() fails to get memory

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yi Zou <yi.zou@intel.com>

commit d0e27c88d795fb9647153063ec48051fd84e1731 upstream.

I am hitting this bug when the target is low in memory that fails the
alloc_page() for the newly submitted command. This is a sort of off-by-one
bug causing NULL pointer dereference in __free_page() since 'i' here is
really the counter of total pages that have been successfully allocated here.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Open-FCoE.org <devel@open-fcoe.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/target/target_core_transport.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 0eaae23..a7589cc 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2294,9 +2294,9 @@ transport_generic_get_mem(struct se_cmd *cmd)
 	return 0;
 
 out:
-	while (i >= 0) {
-		__free_page(sg_page(&cmd->t_data_sg[i]));
+	while (i > 0) {
 		i--;
+		__free_page(sg_page(&cmd->t_data_sg[i]));
 	}
 	kfree(cmd->t_data_sg);
 	cmd->t_data_sg = NULL;

[ 39/95] ext4: fix long mount times on very big file systems

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 0548bbb85337e532ca2ed697c3e9b227ff2ed4b4 upstream.

Commit 8aeb00ff85a: "ext4: fix overhead calculation used by
ext4_statfs()" introduced a O(n**2) calculation which makes very large
file systems take forever to mount.  Fix this with an optimization for
non-bigalloc file systems.  (For bigalloc file systems the overhead
needs to be set in the the superblock.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ext4/super.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 56bcaec..5984989 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3120,6 +3120,10 @@ static int count_overhead(struct super_block *sb, ext4_group_t grp,
 	ext4_group_t		i, ngroups = ext4_get_groups_count(sb);
 	int			s, j, count = 0;
 
+	if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC))
+		return (ext4_bg_has_super(sb, grp) + ext4_bg_num_gdb(sb, grp) +
+			sbi->s_itb_per_group + 2);
+
 	first_block = le32_to_cpu(sbi->s_es->s_first_data_block) +
 		(grp * EXT4_BLOCKS_PER_GROUP(sb));
 	last_block = first_block + EXT4_BLOCKS_PER_GROUP(sb) - 1;

[ 40/95] PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rjw@sisk.pl>

commit 7f321c26c04807834fef4c524d2b21573423fc74 upstream.

For devices whose power.no_callbacks flag is set, rpm_resume()
should return 1 if the device's parent is already active, so that
the callers of pm_runtime_get() don't think that they have to wait
for the device to resume (asynchronously) in that case (the core
won't queue up an asynchronous resume in that case, so there's
nothing to wait for anyway).

Modify the code accordingly (and make sure that an idle notification
will be queued up on success, even if 1 is to be returned).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/base/power/runtime.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 5989487..9891a85 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -584,6 +584,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
 		    || dev->parent->power.runtime_status == RPM_ACTIVE) {
 			atomic_inc(&dev->parent->power.child_count);
 			spin_unlock(&dev->parent->power.lock);
+			retval = 1;
 			goto no_callback;	/* Assume success. */
 		}
 		spin_unlock(&dev->parent->power.lock);
@@ -664,7 +665,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
 	}
 	wake_up_all(&dev->power.wait_queue);
 
-	if (!retval)
+	if (retval >= 0)
 		rpm_idle(dev, RPM_ASYNC);
 
  out:

[ 41/95] PM / Runtime: Clear power.deferred_resume on success in rpm_suspend()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rjw@sisk.pl>

commit 58a34de7b1a920d287d17d2ca08bc9aaf7e6d35b upstream.

The power.deferred_resume can only be set if the runtime PM status
of device is RPM_SUSPENDING and it should be cleared after its
status has been changed, regardless of whether or not the runtime
suspend has been successful.  However, it only is cleared on
suspend failure, while it may remain set on successful suspend and
is happily leaked to rpm_resume() executed in that case.

That shouldn't happen, so if power.deferred_resume is set in
rpm_suspend() after the status has been changed to RPM_SUSPENDED,
clear it before calling rpm_resume().  Then, it doesn't need to be
cleared before changing the status to RPM_SUSPENDING any more,
because it's always cleared after the status has been changed to
either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/base/power/runtime.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 9891a85..b6e9d9b 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -388,7 +388,6 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 		goto repeat;
 	}
 
-	dev->power.deferred_resume = false;
 	if (dev->power.no_callbacks)
 		goto no_callback;	/* Assume success. */
 
@@ -440,6 +439,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 	wake_up_all(&dev->power.wait_queue);
 
 	if (dev->power.deferred_resume) {
+		dev->power.deferred_resume = false;
 		rpm_resume(dev, 0);
 		retval = -EAGAIN;
 		goto out;

[ 42/95] ASoC: wm9712: Fix microphone source selection

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit ccf795847a38235ee4a56a24129ce75147d6ba8f upstream.

Currently the microphone input source is not selectable as while there is
a DAPM widget it's not connected to anything so it won't be properly
instantiated. Add something more correct for the input structure to get
things going, even though it's not hooked into the rest of the routing
map and so won't actually achieve anything except allowing the relevant
register bits to be written.

Reported-by: Christop Fritz <chf.fritz@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/soc/codecs/wm9712.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index f16fb36..fd74b88 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -272,7 +272,7 @@ SOC_DAPM_ENUM("Route", wm9712_enum[9]);
 
 /* Mic select */
 static const struct snd_kcontrol_new wm9712_mic_src_controls =
-SOC_DAPM_ENUM("Route", wm9712_enum[7]);
+SOC_DAPM_ENUM("Mic Source Select", wm9712_enum[7]);
 
 /* diff select */
 static const struct snd_kcontrol_new wm9712_diff_sel_controls =
@@ -291,7 +291,9 @@ SND_SOC_DAPM_MUX("Left Capture Select", SND_SOC_NOPM, 0, 0,
 	&wm9712_capture_selectl_controls),
 SND_SOC_DAPM_MUX("Right Capture Select", SND_SOC_NOPM, 0, 0,
 	&wm9712_capture_selectr_controls),
-SND_SOC_DAPM_MUX("Mic Select Source", SND_SOC_NOPM, 0, 0,
+SND_SOC_DAPM_MUX("Left Mic Select Source", SND_SOC_NOPM, 0, 0,
+	&wm9712_mic_src_controls),
+SND_SOC_DAPM_MUX("Right Mic Select Source", SND_SOC_NOPM, 0, 0,
 	&wm9712_mic_src_controls),
 SND_SOC_DAPM_MUX("Differential Source", SND_SOC_NOPM, 0, 0,
 	&wm9712_diff_sel_controls),
@@ -319,6 +321,7 @@ SND_SOC_DAPM_PGA("Out 3 PGA", AC97_INT_PAGING, 5, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Line PGA", AC97_INT_PAGING, 2, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Phone PGA", AC97_INT_PAGING, 1, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Mic PGA", AC97_INT_PAGING, 0, 1, NULL, 0),
+SND_SOC_DAPM_PGA("Differential Mic", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MICBIAS("Mic Bias", AC97_INT_PAGING, 10, 1),
 SND_SOC_DAPM_OUTPUT("MONOOUT"),
 SND_SOC_DAPM_OUTPUT("HPOUTL"),
@@ -379,6 +382,18 @@ static const struct snd_soc_dapm_route wm9712_audio_map[] = {
 	{"Mic PGA", NULL, "MIC1"},
 	{"Mic PGA", NULL, "MIC2"},
 
+	/* microphones */
+	{"Differential Mic", NULL, "MIC1"},
+	{"Differential Mic", NULL, "MIC2"},
+	{"Left Mic Select Source", "Mic 1", "MIC1"},
+	{"Left Mic Select Source", "Mic 2", "MIC2"},
+	{"Left Mic Select Source", "Stereo", "MIC1"},
+	{"Left Mic Select Source", "Differential", "Differential Mic"},
+	{"Right Mic Select Source", "Mic 1", "MIC1"},
+	{"Right Mic Select Source", "Mic 2", "MIC2"},
+	{"Right Mic Select Source", "Stereo", "MIC2"},
+	{"Right Mic Select Source", "Differential", "Differential Mic"},
+
 	/* left capture selector */
 	{"Left Capture Select", "Mic", "MIC1"},
 	{"Left Capture Select", "Speaker Mixer", "Speaker Mixer"},

[ 43/95] USB: smsusb: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1470 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d04dbd1c0ec17a13326c8f2279399c225836a79f upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
CC: Michael Krufky <mkrufky@linuxtv.org>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Doron Cohen <doronc@siano-ms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/media/dvb/siano/smsusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 664e460..aac6222 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -481,7 +481,7 @@ static int smsusb_resume(struct usb_interface *intf)
 	return 0;
 }
 
-static const struct usb_device_id smsusb_id_table[] __devinitconst = {
+static const struct usb_device_id smsusb_id_table[] = {
 	{ USB_DEVICE(0x187f, 0x0010),
 		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
 	{ USB_DEVICE(0x187f, 0x0100),

[ 44/95] USB: spca506: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1404 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e694d518886c7afedcdd1732477832b2e32744e4 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/media/video/gspca/spca506.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index 969bb5a..bab01c8 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -579,7 +579,7 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-static const struct usb_device_id device_table[] __devinitconst = {
+static const struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x06e1, 0xa190)},
 /*fixme: may be IntelPCCameraPro BRIDGE_SPCA505
 	{USB_DEVICE(0x0733, 0x0430)}, */

[ 45/95] USB: p54usb: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1421 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9c4167cbbafddac3462134013bc15e63e4c53ef upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Christian Lamparter <chunkeey@googlemail.com>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/p54/p54usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 7f207b6..effb044 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -42,7 +42,7 @@ MODULE_FIRMWARE("isl3887usb");
  * whenever you add a new device.
  */
 
-static struct usb_device_id p54u_table[] __devinitdata = {
+static struct usb_device_id p54u_table[] = {
 	/* Version 1 devices (pci chip + net2280) */
 	{USB_DEVICE(0x0411, 0x0050)},	/* Buffalo WLI2-USB2-G54 */
 	{USB_DEVICE(0x045e, 0x00c2)},	/* Microsoft MN-710 */

[ 46/95] USB: rtl8187: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1570 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a3433179d0822ccfa8e80aa4d1d52843bd2dcc63 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Herton Ronaldo Krzesinski <herton@canonical.com>
CC: Hin-Tak Leung <htl10@users.sourceforge.net>
CC: Larry Finger <Larry.Finger@lwfinger.net>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rtl818x/rtl8187/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 71a30b0..5330240 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -44,7 +44,7 @@ MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
 MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
 MODULE_LICENSE("GPL");
 
-static struct usb_device_id rtl8187_table[] __devinitdata = {
+static struct usb_device_id rtl8187_table[] = {
 	/* Asus */
 	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
 	/* Belkin */

[ 47/95] USB: vt6656: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1451 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d088876f24887cd15a29db923f5f37db6a99f21 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Forest Bond <forest@alittletooquiet.net>
CC: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jesper Juhl <jj@chaosbits.net>
CC: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/vt6656/main_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index b06fd5b..d536756 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -189,7 +189,7 @@ DEVICE_PARAM(b80211hEnable, "802.11h mode");
 // Static vars definitions
 //
 
-static struct usb_device_id vt6656_table[] __devinitdata = {
+static struct usb_device_id vt6656_table[] = {
 	{USB_DEVICE(VNT_USB_VENDOR_ID, VNT_USB_PRODUCT_ID)},
 	{}
 };

[ 48/95] USB: winbond: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1509 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 43a34695d9cd79c6659f09da6d3b0624f3dd169f upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Pavel Machek <pavel@ucw.cz>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Eliad Peller <eliad@wizery.com>
CC: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/winbond/wbusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index ef36054..0ca857a 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -25,7 +25,7 @@ MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION("0.1");
 
-static const struct usb_device_id wb35_table[] __devinitconst = {
+static const struct usb_device_id wb35_table[] = {
 	{ USB_DEVICE(0x0416, 0x0035) },
 	{ USB_DEVICE(0x18E8, 0x6201) },
 	{ USB_DEVICE(0x18E8, 0x6206) },

[ 49/95] USB: emi62: remove __devinit* from the struct usb_device_id table

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1341 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83957df21dd94655d2b026e0944a69ff37b83988 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/misc/emi62.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index ff08015..ae794b9 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -232,7 +232,7 @@ wraperr:
 	return err;
 }
 
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
 	{ }                                             /* Terminating entry */
 };

[ 50/95] USB: CDC ACM: Fix NULL pointer dereference

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sven Schnelle <svens@stackframe.org>

commit 99f347caa4568cb803862730b3b1f1942639523f upstream.

If a device specifies zero endpoints in its interface descriptor,
the kernel oopses in acm_probe(). Even though that's clearly an
invalid descriptor, we should test wether we have all endpoints.
This is especially bad as this oops can be triggered by just
plugging a USB device in.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/class/cdc-acm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 56d6bf6..f763ed7 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1104,7 +1104,8 @@ skip_normal_probe:
 	}
 
 
-	if (data_interface->cur_altsetting->desc.bNumEndpoints < 2)
+	if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 ||
+	    control_interface->cur_altsetting->desc.bNumEndpoints == 0)
 		return -EINVAL;
 
 	epctrl = &control_interface->cur_altsetting->endpoint[0].desc;

[ 51/95] alpha: Dont export SOCK_NONBLOCK to user space.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Cree <mcree@orcon.net.nz>

commit a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f upstream.

Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g.  see Debian bug #658460).

The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/alpha/include/asm/socket.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -69,9 +69,11 @@
 
 #define SO_RXQ_OVFL             40
 
+#ifdef __KERNEL__
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
 #define SOCK_NONBLOCK	0x40000000
+#endif /* __KERNEL__ */
 
 #endif /* _ASM_SOCKET_H */

[ 52/95] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit 67a806d9499353fabd5b5ff07337f3aa88a1c3ba upstream.

The following build error occurred during an alpha build:

  net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/alpha/include/asm/atomic.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 3bb7ffe..c2cbe4f 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -14,8 +14,8 @@
  */
 
 
-#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
-#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic64_read(v)	(*(volatile long *)&(v)->counter)

[ 53/95] ALSA: hda - dont create dysfunctional mixer controls for ca0132

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit c41999a23929f30808bae6009d8065052d4d73fd upstream.

It's possible that these amps are settable somehow, e g through
secret codec verbs, but for now, don't create the controls (as
they won't be working anyway, and cause errors in amixer).

BugLink: https://bugs.launchpad.net/bugs/1038651
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/patch_ca0132.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 9c0ec0a..49750a9 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -275,6 +275,10 @@ static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
 	int type = dir ? HDA_INPUT : HDA_OUTPUT;
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type);
+	if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_MUTE) == 0) {
+		snd_printdd("Skipping '%s %s Switch' (no mute on node 0x%x)\n", pfx, dirstr[dir], nid);
+		return 0;
+	}
 	sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
 	return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
 }
@@ -286,6 +290,10 @@ static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
 	int type = dir ? HDA_INPUT : HDA_OUTPUT;
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type);
+	if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_NUM_STEPS) == 0) {
+		snd_printdd("Skipping '%s %s Volume' (no amp on node 0x%x)\n", pfx, dirstr[dir], nid);
+		return 0;
+	}
 	sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]);
 	return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
 }

[ 54/95] netconsole: remove a redundant netconsole_target_put()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amerigo Wang <amwang@redhat.com>

commit 72d3eb13b5c0abe7d63efac41f39c5b644c7bbaa upstream.

This netconsole_target_put() is obviously redundant, and it
causes a kernel segfault when removing a bridge device which has
netconsole running on it.

This is caused by:

	commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093
	Author: Amerigo Wang <amwang@redhat.com>
	Date:   Thu May 19 21:39:10 2011 +0000

	    netpoll: disable netpoll when enslave a device

Cc: David Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/netconsole.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -652,7 +652,6 @@ static int netconsole_netdev_event(struc
 							  flags);
 					dev_put(nt->np.dev);
 					nt->np.dev = NULL;
-					netconsole_target_put(nt);
 				}
 				nt->enabled = 0;
 				stopped = true;

[ 55/95] drm/radeon/kms: upstream atombios.h updates

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

This is much larger than would normally be allowed for stable, but it's
updating the definition of an external firmware interface and not (so
far as I can see) making any changes to kernel behaviour or interfaces.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit bf68adb4df2ac27a8f1b24894c007c9ef1c4195a upstream.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/atombios.h |  929 +++++++++++++++++++++++++++++++++++--
 1 file changed, 883 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 1b50ad8..4760466 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -101,6 +101,7 @@
 #define ATOM_LCD_SELFTEST_START									(ATOM_DISABLE+5)
 #define ATOM_LCD_SELFTEST_STOP									(ATOM_ENABLE+5)
 #define ATOM_ENCODER_INIT			                  (ATOM_DISABLE+7)
+#define ATOM_INIT			                          (ATOM_DISABLE+7)
 #define ATOM_GET_STATUS                         (ATOM_DISABLE+8)
 
 #define ATOM_BLANKING         1
@@ -251,25 +252,25 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT SetEngineClock;                         //Function Table,directly used by various SW components,latest version 1.1
   USHORT SetMemoryClock;                         //Function Table,directly used by various SW components,latest version 1.1
   USHORT SetPixelClock;                          //Function Table,directly used by various SW components,latest version 1.2  
-  USHORT DynamicClockGating;                     //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
+  USHORT EnableDispPowerGating;                  //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
   USHORT ResetMemoryDLL;                         //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
   USHORT ResetMemoryDevice;                      //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
-  USHORT MemoryPLLInit;
-  USHORT AdjustDisplayPll;												//only used by Bios
+  USHORT MemoryPLLInit;                          //Atomic Table,  used only by Bios
+  USHORT AdjustDisplayPll;											 //Atomic Table,  used by various SW componentes. 
   USHORT AdjustMemoryController;                 //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock                
   USHORT EnableASIC_StaticPwrMgt;                //Atomic Table,  only used by Bios
   USHORT ASIC_StaticPwrMgtStatusChange;          //Obsolete ,     only used by Bios   
   USHORT DAC_LoadDetection;                      //Atomic Table,  directly used by various SW components,latest version 1.2  
   USHORT LVTMAEncoderControl;                    //Atomic Table,directly used by various SW components,latest version 1.3
-  USHORT LCD1OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1 
+  USHORT HW_Misc_Operation;                      //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT DAC1EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1  
   USHORT DAC2EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT DVOOutputControl;                       //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT CV1OutputControl;                       //Atomic Table,  Atomic Table,  Obsolete from Ry6xx, use DAC2 Output instead 
-  USHORT GetConditionalGoldenSetting;            //only used by Bios
+  USHORT GetConditionalGoldenSetting;            //Only used by Bios
   USHORT TVEncoderControl;                       //Function Table,directly used by various SW components,latest version 1.1
-  USHORT TMDSAEncoderControl;                    //Atomic Table,  directly used by various SW components,latest version 1.3
-  USHORT LVDSEncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.3
+  USHORT PatchMCSetting;                         //only used by BIOS
+  USHORT MC_SEQ_Control;                         //only used by BIOS
   USHORT TV1OutputControl;                       //Atomic Table,  Obsolete from Ry6xx, use DAC2 Output instead
   USHORT EnableScaler;                           //Atomic Table,  used only by Bios
   USHORT BlankCRTC;                              //Atomic Table,  directly used by various SW components,latest version 1.1 
@@ -282,7 +283,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT SetCRTC_Replication;                    //Atomic Table,  used only by Bios
   USHORT SelectCRTC_Source;                      //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT EnableGraphSurfaces;                    //Atomic Table,  used only by Bios
-  USHORT UpdateCRTC_DoubleBufferRegisters;
+  USHORT UpdateCRTC_DoubleBufferRegisters;			 //Atomic Table,  used only by Bios
   USHORT LUT_AutoFill;                           //Atomic Table,  only used by Bios
   USHORT EnableHW_IconCursor;                    //Atomic Table,  only used by Bios
   USHORT GetMemoryClock;                         //Atomic Table,  directly used by various SW components,latest version 1.1 
@@ -308,27 +309,36 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT SetVoltage;                             //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
   USHORT DAC1OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
   USHORT DAC2OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
-  USHORT SetupHWAssistedI2CStatus;               //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
+  USHORT ComputeMemoryClockParam;                //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
   USHORT ClockSource;                            //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
   USHORT MemoryDeviceInit;                       //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
-  USHORT EnableYUV;                              //Atomic Table,  indirectly used by various SW components,called from EnableVGARender
+  USHORT GetDispObjectInfo;                      //Atomic Table,  indirectly used by various SW components,called from EnableVGARender
   USHORT DIG1EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
   USHORT DIG2EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
   USHORT DIG1TransmitterControl;                 //Atomic Table,directly used by various SW components,latest version 1.1
   USHORT DIG2TransmitterControl;	               //Atomic Table,directly used by various SW components,latest version 1.1 
   USHORT ProcessAuxChannelTransaction;					 //Function Table,only used by Bios
   USHORT DPEncoderService;											 //Function Table,only used by Bios
+  USHORT GetVoltageInfo;                         //Function Table,only used by Bios since SI
 }ATOM_MASTER_LIST_OF_COMMAND_TABLES;   
 
 // For backward compatible 
 #define ReadEDIDFromHWAssistedI2C                ProcessI2cChannelTransaction
-#define UNIPHYTransmitterControl						     DIG1TransmitterControl
-#define LVTMATransmitterControl							     DIG2TransmitterControl
+#define DPTranslatorControl                      DIG2EncoderControl
+#define UNIPHYTransmitterControl			     DIG1TransmitterControl
+#define LVTMATransmitterControl				     DIG2TransmitterControl
 #define SetCRTC_DPM_State                        GetConditionalGoldenSetting
 #define SetUniphyInstance                        ASIC_StaticPwrMgtStatusChange
 #define HPDInterruptService                      ReadHWAssistedI2CStatus
 #define EnableVGA_Access                         GetSCLKOverMCLKRatio
-#define GetDispObjectInfo                        EnableYUV 
+#define EnableYUV                                GetDispObjectInfo                         
+#define DynamicClockGating                       EnableDispPowerGating
+#define SetupHWAssistedI2CStatus                 ComputeMemoryClockParam
+
+#define TMDSAEncoderControl                      PatchMCSetting
+#define LVDSEncoderControl                       MC_SEQ_Control
+#define LCD1OutputControl                        HW_Misc_Operation
+
 
 typedef struct _ATOM_MASTER_COMMAND_TABLE
 {
@@ -495,6 +505,34 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
 // ucInputFlag
 #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN  1   // 1-StrobeMode, 0-PerformanceMode
 
+// use for ComputeMemoryClockParamTable
+typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1
+{
+  union
+  {
+    ULONG  ulClock;         
+    ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output:UPPER_WORD=FB_DIV_INTEGER,  LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
+  };
+  UCHAR   ucDllSpeed;                         //Output 
+  UCHAR   ucPostDiv;                          //Output
+  union{
+    UCHAR   ucInputFlag;                      //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
+    UCHAR   ucPllCntlFlag;                    //Output: 
+  };
+  UCHAR   ucBWCntl;                       
+}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1;
+
+// definition of ucInputFlag
+#define MPLL_INPUT_FLAG_STROBE_MODE_EN          0x01
+// definition of ucPllCntlFlag
+#define MPLL_CNTL_FLAG_VCO_MODE_MASK            0x03 
+#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL            0x04
+#define MPLL_CNTL_FLAG_QDR_ENABLE               0x08
+#define MPLL_CNTL_FLAG_AD_HALF_RATE             0x10
+
+//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL
+#define MPLL_CNTL_FLAG_BYPASS_AD_PLL            0x04
+
 typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
 {
   ATOM_COMPUTE_CLOCK_FREQ ulClock;
@@ -562,6 +600,16 @@ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
 #define  DYNAMIC_CLOCK_GATING_PS_ALLOCATION  DYNAMIC_CLOCK_GATING_PARAMETERS
 
 /****************************************************************************/	
+// Structure used by EnableDispPowerGatingTable.ctb
+/****************************************************************************/	
+typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 
+{
+  UCHAR ucDispPipeId;                 // ATOM_CRTC1, ATOM_CRTC2, ...
+  UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
+  UCHAR ucPadding[2];
+}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1;
+
+/****************************************************************************/	
 // Structure used by EnableASIC_StaticPwrMgtTable.ctb
 /****************************************************************************/	
 typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
@@ -807,6 +855,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ		  0x00
 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ		  0x01
 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ		  0x02
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ		  0x03
 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL					  0x70
 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER					  0x00
 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER					  0x10
@@ -814,6 +863,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER					  0x30
 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER					  0x40
 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER					  0x50
+#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER					  0x60
 
 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
 {
@@ -1171,6 +1221,106 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3           	0x80	//EF
 
 
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5
+{
+#if ATOM_BIG_ENDIAN
+  UCHAR ucReservd1:1;
+  UCHAR ucHPDSel:3;
+  UCHAR ucPhyClkSrcId:2;            
+  UCHAR ucCoherentMode:1;            
+  UCHAR ucReserved:1;
+#else
+  UCHAR ucReserved:1;
+  UCHAR ucCoherentMode:1;            
+  UCHAR ucPhyClkSrcId:2;            
+  UCHAR ucHPDSel:3;
+  UCHAR ucReservd1:1;
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V5;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+{
+  USHORT usSymClock;		        // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock,  (HDMI deep color), =pixel clock * deep_color_ratio
+  UCHAR  ucPhyId;                   // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
+  UCHAR  ucAction;				    // define as ATOM_TRANSMITER_ACTION_xxx
+  UCHAR  ucLaneNum;                 // indicate lane number 1-8
+  UCHAR  ucConnObjId;               // Connector Object Id defined in ObjectId.h
+  UCHAR  ucDigMode;                 // indicate DIG mode
+  union{
+  ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+  UCHAR ucConfig;
+  };
+  UCHAR  ucDigEncoderSel;           // indicate DIG front end encoder 
+  UCHAR  ucDPLaneSet;
+  UCHAR  ucReserved;
+  UCHAR  ucReserved1;
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5;
+
+//ucPhyId
+#define ATOM_PHY_ID_UNIPHYA                                 0  
+#define ATOM_PHY_ID_UNIPHYB                                 1
+#define ATOM_PHY_ID_UNIPHYC                                 2
+#define ATOM_PHY_ID_UNIPHYD                                 3
+#define ATOM_PHY_ID_UNIPHYE                                 4
+#define ATOM_PHY_ID_UNIPHYF                                 5
+#define ATOM_PHY_ID_UNIPHYG                                 6
+
+// ucDigEncoderSel
+#define ATOM_TRANMSITTER_V5__DIGA_SEL                       0x01
+#define ATOM_TRANMSITTER_V5__DIGB_SEL                       0x02
+#define ATOM_TRANMSITTER_V5__DIGC_SEL                       0x04
+#define ATOM_TRANMSITTER_V5__DIGD_SEL                       0x08
+#define ATOM_TRANMSITTER_V5__DIGE_SEL                       0x10
+#define ATOM_TRANMSITTER_V5__DIGF_SEL                       0x20
+#define ATOM_TRANMSITTER_V5__DIGG_SEL                       0x40
+
+// ucDigMode
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP                      0
+#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS                    1
+#define ATOM_TRANSMITTER_DIGMODE_V5_DVI                     2
+#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI                    3
+#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO                    4
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST                  5
+
+// ucDPLaneSet
+#define DP_LANE_SET__0DB_0_4V                               0x00
+#define DP_LANE_SET__0DB_0_6V                               0x01
+#define DP_LANE_SET__0DB_0_8V                               0x02
+#define DP_LANE_SET__0DB_1_2V                               0x03
+#define DP_LANE_SET__3_5DB_0_4V                             0x08  
+#define DP_LANE_SET__3_5DB_0_6V                             0x09
+#define DP_LANE_SET__3_5DB_0_8V                             0x0a
+#define DP_LANE_SET__6DB_0_4V                               0x10
+#define DP_LANE_SET__6DB_0_6V                               0x11
+#define DP_LANE_SET__9_5DB_0_4V                             0x18  
+
+// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+// Bit1
+#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT				          0x02
+
+// Bit3:2
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 	        0x0c
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT		    0x02
+
+#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL         		        0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL		                0x04
+#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL		                0x08   
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT           0x0c
+// Bit6:4
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK		          0x70
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT		      0x04
+
+#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL				        0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL				          0x10
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL				          0x20
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL				          0x30
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL				          0x40
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL				          0x50
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL				          0x60
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5            DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+
+
 /****************************************************************************/	
 // Structures used by ExternalEncoderControlTable V1.3
 // ASIC Families: Evergreen, Llano, NI
@@ -1793,6 +1943,7 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
 #define ATOM_PPLL_SS_TYPE_V3_P1PLL            0x00
 #define ATOM_PPLL_SS_TYPE_V3_P2PLL            0x04
 #define ATOM_PPLL_SS_TYPE_V3_DCPLL            0x08
+#define ATOM_PPLL_SS_TYPE_V3_P0PLL            ATOM_PPLL_SS_TYPE_V3_DCPLL
 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK     0x00FF
 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT    0
 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK     0x0F00
@@ -2030,12 +2181,77 @@ typedef struct	_SET_VOLTAGE_PARAMETERS_V2
   USHORT   usVoltageLevel;              // real voltage level
 }SET_VOLTAGE_PARAMETERS_V2;
 
+
+typedef struct	_SET_VOLTAGE_PARAMETERS_V1_3
+{
+  UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+  UCHAR    ucVoltageMode;               // Indicate action: Set voltage level
+  USHORT   usVoltageLevel;              // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. )
+}SET_VOLTAGE_PARAMETERS_V1_3;
+
+//ucVoltageType
+#define VOLTAGE_TYPE_VDDC                    1
+#define VOLTAGE_TYPE_MVDDC                   2
+#define VOLTAGE_TYPE_MVDDQ                   3
+#define VOLTAGE_TYPE_VDDCI                   4
+
+//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
+#define ATOM_SET_VOLTAGE                     0        //Set voltage Level
+#define ATOM_INIT_VOLTAGE_REGULATOR          3        //Init Regulator
+#define ATOM_SET_VOLTAGE_PHASE               4        //Set Vregulator Phase
+#define ATOM_GET_MAX_VOLTAGE                 6        //Get Max Voltage, not used in SetVoltageTable v1.3
+#define ATOM_GET_VOLTAGE_LEVEL               6        //Get Voltage level from vitual voltage ID
+
+// define vitual voltage id in usVoltageLevel
+#define ATOM_VIRTUAL_VOLTAGE_ID0             0xff01
+#define ATOM_VIRTUAL_VOLTAGE_ID1             0xff02
+#define ATOM_VIRTUAL_VOLTAGE_ID2             0xff03
+#define ATOM_VIRTUAL_VOLTAGE_ID3             0xff04
+
 typedef struct _SET_VOLTAGE_PS_ALLOCATION
 {
   SET_VOLTAGE_PARAMETERS sASICSetVoltage;
   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
 }SET_VOLTAGE_PS_ALLOCATION;
 
+// New Added from SI for GetVoltageInfoTable, input parameter structure
+typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1
+{
+  UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+  UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
+  USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id 
+  ULONG    ulReserved;
+}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID
+typedef struct  _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+  ULONG    ulVotlageGpioState;
+  ULONG    ulVoltageGPioMask;
+}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID
+typedef struct  _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+  USHORT   usVoltageLevel;
+  USHORT   usVoltageId;                                  // Voltage Id programmed in Voltage Regulator
+  ULONG    ulReseved;
+}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+
+// GetVoltageInfo v1.1 ucVoltageMode
+#define	ATOM_GET_VOLTAGE_VID                0x00
+#define ATOM_GET_VOTLAGE_INIT_SEQ           0x03
+#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID   0x04
+// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
+#define	ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
+
+// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
+#define	ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
+// undefined power state
+#define	ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
+#define	ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
+
 /****************************************************************************/	
 // Structures used by TVEncoderControlTable
 /****************************************************************************/	
@@ -2065,9 +2281,9 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
   USHORT        MultimediaConfigInfo;     // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
   USHORT        StandardVESA_Timing;      // Only used by Bios
   USHORT        FirmwareInfo;             // Shared by various SW components,latest version 1.4
-  USHORT        DAC_Info;                 // Will be obsolete from R600
+  USHORT        PaletteData;              // Only used by BIOS
   USHORT        LCD_Info;                 // Shared by various SW components,latest version 1.3, was called LVDS_Info 
-  USHORT        TMDS_Info;                // Will be obsolete from R600
+  USHORT        DIGTransmitterInfo;       // Internal used by VBIOS only version 3.1
   USHORT        AnalogTV_Info;            // Shared by various SW components,latest version 1.1 
   USHORT        SupportedDevicesInfo;     // Will be obsolete from R600
   USHORT        GPIO_I2C_Info;            // Shared by various SW components,latest version 1.2 will be used from R600           
@@ -2096,15 +2312,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
 	USHORT				PowerSourceInfo;					// Shared by various SW components, latest versoin 1.1
 }ATOM_MASTER_LIST_OF_DATA_TABLES;
 
-// For backward compatible 
-#define LVDS_Info                LCD_Info
-
 typedef struct _ATOM_MASTER_DATA_TABLE
 { 
   ATOM_COMMON_TABLE_HEADER sHeader;  
   ATOM_MASTER_LIST_OF_DATA_TABLES   ListOfDataTables;
 }ATOM_MASTER_DATA_TABLE;
 
+// For backward compatible 
+#define LVDS_Info                LCD_Info
+#define DAC_Info                 PaletteData
+#define TMDS_Info                DIGTransmitterInfo
 
 /****************************************************************************/	
 // Structure used in MultimediaCapabilityInfoTable
@@ -2171,7 +2388,9 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
 typedef struct _ATOM_FIRMWARE_CAPABILITY
 {
 #if ATOM_BIG_ENDIAN
-  USHORT Reserved:3;
+  USHORT Reserved:1;
+  USHORT SCL2Redefined:1;
+  USHORT PostWithoutModeSet:1;
   USHORT HyperMemory_Size:4;
   USHORT HyperMemory_Support:1;
   USHORT PPMode_Assigned:1;
@@ -2193,7 +2412,9 @@ typedef struct _ATOM_FIRMWARE_CAPABILITY
   USHORT PPMode_Assigned:1;
   USHORT HyperMemory_Support:1;
   USHORT HyperMemory_Size:4;
-  USHORT Reserved:3;
+  USHORT PostWithoutModeSet:1;
+  USHORT SCL2Redefined:1;
+  USHORT Reserved:1;
 #endif
 }ATOM_FIRMWARE_CAPABILITY;
 
@@ -2418,7 +2639,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
   ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
-  ULONG                           ulReserved5;                //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
+  UCHAR                           ucRemoteDisplayConfig;
+  UCHAR                           ucReserved5[3];             //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
   ULONG                           ulReserved6;                //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
   ULONG                           ulReserved7;                //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
   USHORT                          usReserved11;               //Was usMaxPixelClock;  //In 10Khz unit, Max.  Pclk used only for DAC
@@ -2438,6 +2660,11 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
 
 #define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V2_2
 
+
+// definition of ucRemoteDisplayConfig
+#define REMOTE_DISPLAY_DISABLE                   0x00
+#define REMOTE_DISPLAY_ENABLE                    0x01
+
 /****************************************************************************/	
 // Structures used in IntegratedSystemInfoTable
 /****************************************************************************/	
@@ -2660,8 +2887,9 @@ usMinDownStreamHTLinkWidth:  same as above.
 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND      2
 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__K8             3
 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH        4
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI         5
 
-#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH    // this deff reflects max defined CPU code
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI    // this deff reflects max defined CPU code
 
 #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
@@ -2753,6 +2981,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
 #define ASIC_INT_DIG4_ENCODER_ID													0x0b
 #define ASIC_INT_DIG5_ENCODER_ID													0x0c
 #define ASIC_INT_DIG6_ENCODER_ID													0x0d
+#define ASIC_INT_DIG7_ENCODER_ID													0x0e
 
 //define Encoder attribute
 #define ATOM_ANALOG_ENCODER																0
@@ -3226,15 +3455,23 @@ typedef struct _ATOM_LCD_INFO_V13
 
   UCHAR               ucPowerSequenceDIGONtoDE_in4Ms;
   UCHAR               ucPowerSequenceDEtoVARY_BL_in4Ms;
-  UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
   UCHAR               ucPowerSequenceVARY_BLtoDE_in4Ms;
+  UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
 
   UCHAR               ucOffDelay_in4Ms;
   UCHAR               ucPowerSequenceVARY_BLtoBLON_in4Ms;
   UCHAR               ucPowerSequenceBLONtoVARY_BL_in4Ms;
   UCHAR               ucReserved1;
 
-  ULONG               ulReserved[4];
+  UCHAR               ucDPCD_eDP_CONFIGURATION_CAP;     // dpcd 0dh
+  UCHAR               ucDPCD_MAX_LINK_RATE;             // dpcd 01h
+  UCHAR               ucDPCD_MAX_LANE_COUNT;            // dpcd 02h
+  UCHAR               ucDPCD_MAX_DOWNSPREAD;            // dpcd 03h
+
+  USHORT              usMaxPclkFreqInSingleLink;        // Max PixelClock frequency in single link mode. 
+  UCHAR               uceDPToLVDSRxId;
+  UCHAR               ucLcdReservd;
+  ULONG               ulReserved[2];
 }ATOM_LCD_INFO_V13;  
 
 #define ATOM_LCD_INFO_LAST  ATOM_LCD_INFO_V13    
@@ -3273,6 +3510,11 @@ typedef struct _ATOM_LCD_INFO_V13
 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
 #define	LCDPANEL_CAP_V13_eDP                    0x4        // = LCDPANEL_CAP_eDP no change comparing to previous version
 
+//uceDPToLVDSRxId
+#define eDP_TO_LVDS_RX_DISABLE                  0x00       // no eDP->LVDS translator chip 
+#define eDP_TO_LVDS_COMMON_ID                   0x01       // common eDP->LVDS translator chip without AMD SW init
+#define eDP_TO_LVDS_RT_ID                       0x02       // RT tanslator which require AMD SW init
+
 typedef struct  _ATOM_PATCH_RECORD_MODE
 {
   UCHAR     ucRecordType;
@@ -3317,6 +3559,7 @@ typedef struct  _ATOM_PANEL_RESOLUTION_PATCH_RECORD
 #define LCD_CAP_RECORD_TYPE                   3
 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE       4
 #define LCD_PANEL_RESOLUTION_RECORD_TYPE      5
+#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE     6
 #define ATOM_RECORD_END_TYPE                  0xFF
 
 /****************************Spread Spectrum Info Table Definitions **********************/
@@ -3528,6 +3771,7 @@ else	//Non VGA case
 
 CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
 
+/***********************************************************************************/	
 #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO			1
 
 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
@@ -3818,13 +4062,17 @@ typedef struct _EXT_DISPLAY_PATH
     ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
     ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
   };
-  UCHAR   ucReserved;
-  USHORT  usReserved[2]; 
+  UCHAR   ucChPNInvert;                   // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
+  USHORT  usCaps;
+  USHORT  usReserved; 
 }EXT_DISPLAY_PATH;
    
 #define NUMBER_OF_UCHAR_FOR_GUID          16
 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH    7
 
+//usCaps
+#define  EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE          0x01
+
 typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
 {
   ATOM_COMMON_TABLE_HEADER sHeader;
@@ -3832,7 +4080,9 @@ typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
   EXT_DISPLAY_PATH         sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
   UCHAR                    ucChecksum;                            // a  simple Checksum of the sum of whole structure equal to 0x0. 
   UCHAR                    uc3DStereoPinId;                       // use for eDP panel
-  UCHAR                    Reserved [6];                          // for potential expansion
+  UCHAR                    ucRemoteDisplayConfig;
+  UCHAR                    uceDPToLVDSRxId;
+  UCHAR                    Reserved[4];                           // for potential expansion
 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
 
 //Related definitions, all records are different but they have a commond header
@@ -3977,6 +4227,7 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
 #define GPIO_PIN_STATE_ACTIVE_HIGH      0x1
 
 // Indexes to GPIO array in GLSync record 
+// GLSync record is for Frame Lock/Gen Lock feature.
 #define ATOM_GPIO_INDEX_GLSYNC_REFCLK    0
 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC     1
 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC     2
@@ -3984,7 +4235,9 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT  4
 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET   6
-#define ATOM_GPIO_INDEX_GLSYNC_MAX       7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL  8
+#define ATOM_GPIO_INDEX_GLSYNC_MAX       9
 
 typedef struct  _ATOM_ENCODER_DVO_CF_RECORD
 {
@@ -3994,7 +4247,8 @@ typedef struct  _ATOM_ENCODER_DVO_CF_RECORD
 }ATOM_ENCODER_DVO_CF_RECORD;
 
 // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
-#define ATOM_ENCODER_CAP_RECORD_HBR2     0x01         // DP1.2 HBR2 is supported by this path
+#define ATOM_ENCODER_CAP_RECORD_HBR2                  0x01         // DP1.2 HBR2 is supported by HW encoder
+#define ATOM_ENCODER_CAP_RECORD_HBR2_EN               0x02         // DP1.2 HBR2 setting is qualified and HBR2 can be enabled 
 
 typedef struct  _ATOM_ENCODER_CAP_RECORD
 {
@@ -4003,11 +4257,13 @@ typedef struct  _ATOM_ENCODER_CAP_RECORD
     USHORT                    usEncoderCap;         
     struct {
 #if ATOM_BIG_ENDIAN
-      USHORT                  usReserved:15;        // Bit1-15 may be defined for other capability in future
+      USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
+      USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability. 
 #else
       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability. 
-      USHORT                  usReserved:15;        // Bit1-15 may be defined for other capability in future
+      USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
+      USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
 #endif
     };
   }; 
@@ -4157,6 +4413,7 @@ typedef struct _ATOM_VOLTAGE_CONTROL
 #define	VOLTAGE_CONTROL_ID_VT1556M						0x07									
 #define	VOLTAGE_CONTROL_ID_CHL822x						0x08									
 #define	VOLTAGE_CONTROL_ID_VT1586M						0x09
+#define VOLTAGE_CONTROL_ID_UP1637 						0x0A
 
 typedef struct  _ATOM_VOLTAGE_OBJECT
 {
@@ -4193,6 +4450,69 @@ typedef struct  _ATOM_LEAKID_VOLTAGE
 	USHORT	usVoltage;
 }ATOM_LEAKID_VOLTAGE;
 
+typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
+ 	 UCHAR		ucVoltageType;									//Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI	 
+   UCHAR		ucVoltageMode;							    //Indicate voltage control mode: Init/Set/Leakage/Set phase 
+	 USHORT		usSize;													//Size of Object	
+}ATOM_VOLTAGE_OBJECT_HEADER_V3;
+
+typedef struct  _VOLTAGE_LUT_ENTRY_V2
+{
+	 ULONG		ulVoltageId;									  // The Voltage ID which is used to program GPIO register
+	 USHORT		usVoltageValue;									// The corresponding Voltage Value, in mV
+}VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct  _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
+{
+  USHORT	usVoltageLevel; 							  // The Voltage ID which is used to program GPIO register
+  USHORT  usVoltageId;                    
+	USHORT	usLeakageId;									  // The corresponding Voltage Value, in mV
+}LEAKAGE_VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct  _ATOM_I2C_VOLTAGE_OBJECT_V3
+{
+   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+   UCHAR	ucVoltageRegulatorId;					  //Indicate Voltage Regulator Id
+   UCHAR    ucVoltageControlI2cLine;
+   UCHAR    ucVoltageControlAddress;
+   UCHAR    ucVoltageControlOffset;	 	
+   ULONG    ulReserved;
+   VOLTAGE_LUT_ENTRY asVolI2cLut[1];        // end with 0xff
+}ATOM_I2C_VOLTAGE_OBJECT_V3;
+
+typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
+{
+   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;   
+   UCHAR    ucVoltageGpioCntlId;         // default is 0 which indicate control through CG VID mode 
+   UCHAR    ucGpioEntryNum;              // indiate the entry numbers of Votlage/Gpio value Look up table
+   UCHAR    ucPhaseDelay;                // phase delay in unit of micro second
+   UCHAR    ucReserved;   
+   ULONG    ulGpioMaskVal;               // GPIO Mask value
+   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];   
+}ATOM_GPIO_VOLTAGE_OBJECT_V3;
+
+typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+{
+   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+   UCHAR    ucLeakageCntlId;             // default is 0
+   UCHAR    ucLeakageEntryNum;           // indicate the entry number of LeakageId/Voltage Lut table
+   UCHAR    ucReserved[2];               
+   ULONG    ulMaxVoltageLevel;
+   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];   
+}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
+
+typedef union _ATOM_VOLTAGE_OBJECT_V3{
+  ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
+  ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
+  ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
+}ATOM_VOLTAGE_OBJECT_V3;
+
+typedef struct  _ATOM_VOLTAGE_OBJECT_INFO_V3_1
+{
+   ATOM_COMMON_TABLE_HEADER	sHeader; 
+	 ATOM_VOLTAGE_OBJECT_V3			asVoltageObj[3];	//Info for Voltage control	  	 
+}ATOM_VOLTAGE_OBJECT_INFO_V3_1;
+
 typedef struct  _ATOM_ASIC_PROFILE_VOLTAGE
 {
 	UCHAR		ucProfileId;
@@ -4305,7 +4625,18 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
   USHORT usHDMISSpreadRateIn10Hz;
   USHORT usDVISSPercentage;
   USHORT usDVISSpreadRateIn10Hz;
-  ULONG  ulReserved3[21]; 
+  ULONG  SclkDpmBoostMargin;
+  ULONG  SclkDpmThrottleMargin;
+  USHORT SclkDpmTdpLimitPG; 
+  USHORT SclkDpmTdpLimitBoost;
+  ULONG  ulBoostEngineCLock;
+  UCHAR  ulBoostVid_2bit;  
+  UCHAR  EnableBoost;
+  USHORT GnbTdpLimit;
+  USHORT usMaxLVDSPclkFreqInSingleLink;
+  UCHAR  ucLvdsMisc;
+  UCHAR  ucLVDSReserved;
+  ULONG  ulReserved3[15]; 
   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;   
 }ATOM_INTEGRATED_SYSTEM_INFO_V6;   
 
@@ -4313,9 +4644,16 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE       0x01
 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION          0x08
 
-// ulOtherDisplayMisc
-#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT                       0x01
+//ucLVDSMisc:                   
+#define SYS_INFO_LVDSMISC__888_FPDI_MODE                                             0x01
+#define SYS_INFO_LVDSMISC__DL_CH_SWAP                                                0x02
+#define SYS_INFO_LVDSMISC__888_BPC                                                   0x04
+#define SYS_INFO_LVDSMISC__OVERRIDE_EN                                               0x08
+#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW                                           0x10
 
+// not used any more
+#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW                                          0x04
+#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW                                          0x08
 
 /**********************************************************************************************************************
   ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
@@ -4384,7 +4722,208 @@ ucUMAChannelNumber:      	        System memory channel numbers.
 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
-sAvail_SCLK[5]:                   Arrays to provide available list of SLCK and corresponding voltage, order from low to high  
+sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high  
+ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. 
+ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. 
+ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
+usPCIEClkSSPercentage:            PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType:                  PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. 
+usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. 
+usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
+usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
+usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
+usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
+usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+                                  [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+                                  [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
+                                  [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+                                  [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+**********************************************************************************************************************/
+
+// this Table is used for Liano/Ontario APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
+{
+  ATOM_INTEGRATED_SYSTEM_INFO_V6    sIntegratedSysInfo;   
+  ULONG  ulPowerplayTable[128];  
+}ATOM_FUSION_SYSTEM_INFO_V1; 
+/**********************************************************************************************************************
+  ATOM_FUSION_SYSTEM_INFO_V1 Description
+sIntegratedSysInfo:               refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
+ulPowerplayTable[128]:            This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]    
+**********************************************************************************************************************/ 
+
+// this IntegrateSystemInfoTable is used for Trinity APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
+{
+  ATOM_COMMON_TABLE_HEADER   sHeader;
+  ULONG  ulBootUpEngineClock;
+  ULONG  ulDentistVCOFreq;
+  ULONG  ulBootUpUMAClock;
+  ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
+  ULONG  ulBootUpReqDisplayVector;
+  ULONG  ulOtherDisplayMisc;
+  ULONG  ulGPUCapInfo;
+  ULONG  ulSB_MMIO_Base_Addr;
+  USHORT usRequestedPWMFreqInHz;
+  UCHAR  ucHtcTmpLmt;
+  UCHAR  ucHtcHystLmt;
+  ULONG  ulMinEngineClock;
+  ULONG  ulSystemConfig;            
+  ULONG  ulCPUCapInfo;
+  USHORT usNBP0Voltage;               
+  USHORT usNBP1Voltage;
+  USHORT usBootUpNBVoltage;                       
+  USHORT usExtDispConnInfoOffset;
+  USHORT usPanelRefreshRateRange;     
+  UCHAR  ucMemoryType;  
+  UCHAR  ucUMAChannelNumber;
+  UCHAR  strVBIOSMsg[40];
+  ULONG  ulReserved[20];
+  ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
+  ULONG  ulGMCRestoreResetTime;
+  ULONG  ulMinimumNClk;
+  ULONG  ulIdleNClk;
+  ULONG  ulDDR_DLL_PowerUpTime;
+  ULONG  ulDDR_PLL_PowerUpTime;
+  USHORT usPCIEClkSSPercentage;
+  USHORT usPCIEClkSSType;
+  USHORT usLvdsSSPercentage;
+  USHORT usLvdsSSpreadRateIn10Hz;
+  USHORT usHDMISSPercentage;
+  USHORT usHDMISSpreadRateIn10Hz;
+  USHORT usDVISSPercentage;
+  USHORT usDVISSpreadRateIn10Hz;
+  ULONG  SclkDpmBoostMargin;
+  ULONG  SclkDpmThrottleMargin;
+  USHORT SclkDpmTdpLimitPG; 
+  USHORT SclkDpmTdpLimitBoost;
+  ULONG  ulBoostEngineCLock;
+  UCHAR  ulBoostVid_2bit;  
+  UCHAR  EnableBoost;
+  USHORT GnbTdpLimit;
+  USHORT usMaxLVDSPclkFreqInSingleLink;
+  UCHAR  ucLvdsMisc;
+  UCHAR  ucLVDSReserved;
+  UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+  UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+  UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+  UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+  UCHAR  ucLVDSOffToOnDelay_in4Ms;
+  UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+  UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+  UCHAR  ucLVDSReserved1;
+  ULONG  ulLCDBitDepthControlVal;
+  ULONG  ulNbpStateMemclkFreq[4];
+  USHORT usNBP2Voltage;               
+  USHORT usNBP3Voltage;
+  ULONG  ulNbpStateNClkFreq[4];
+  UCHAR  ucNBDPMEnable;
+  UCHAR  ucReserved[3];
+  UCHAR  ucDPMState0VclkFid;
+  UCHAR  ucDPMState0DclkFid;
+  UCHAR  ucDPMState1VclkFid;
+  UCHAR  ucDPMState1DclkFid;
+  UCHAR  ucDPMState2VclkFid;
+  UCHAR  ucDPMState2DclkFid;
+  UCHAR  ucDPMState3VclkFid;
+  UCHAR  ucDPMState3DclkFid;
+  ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_7;
+
+// ulOtherDisplayMisc
+#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT            0x01
+#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT  0x02
+#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT       0x04
+#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT                         0x08
+
+// ulGPUCapInfo
+#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE                0x01
+#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE                               0x02
+#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT                         0x08
+
+/**********************************************************************************************************************
+  ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
+ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit. 
+ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit. 
+sDISPCLK_Voltage:                 Report Display clock voltage requirement.
+ 
+ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Trinity projects:
+                                  ATOM_DEVICE_CRT1_SUPPORT                  0x0001
+                                  ATOM_DEVICE_DFP1_SUPPORT                  0x0008 
+                                  ATOM_DEVICE_DFP6_SUPPORT                  0x0040 
+                                  ATOM_DEVICE_DFP2_SUPPORT                  0x0080       
+                                  ATOM_DEVICE_DFP3_SUPPORT                  0x0200       
+                                  ATOM_DEVICE_DFP4_SUPPORT                  0x0400        
+                                  ATOM_DEVICE_DFP5_SUPPORT                  0x0800
+                                  ATOM_DEVICE_LCD1_SUPPORT                  0x0002
+ulOtherDisplayMisc:      	        bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. 
+                                        =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. 
+                                  bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
+                                        =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
+                                  bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
+                                        =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
+                                  bit[3]=0: VBIOS fast boot is disable
+                                        =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
+ulGPUCapInfo:                     bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
+                                        =1: TMDS/HDMI Coherent Mode use signel PLL mode.
+                                  bit[1]=0: DP mode use cascade PLL mode ( New for Trinity )
+                                        =1: DP mode use single PLL mode
+                                  bit[3]=0: Enable AUX HW mode detection logic
+                                        =1: Disable AUX HW mode detection logic
+                                      
+ulSB_MMIO_Base_Addr:              Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
+
+usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). 
+                                  Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+                                  
+                                  When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+                                  1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+                                  VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+                                  Changing BL using VBIOS function is functional in both driver and non-driver present environment; 
+                                  and enabling VariBri under the driver environment from PP table is optional.
+
+                                  2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+                                  that BL control from GPU is expected.
+                                  VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+                                  Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+                                  it's per platform 
+                                  and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt. 
+                                  Threshold on value to enter HTC_active state.
+ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt. 
+                                  To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+ulMinEngineClock:                 Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
+ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled 
+                                        =1: PCIE Power Gating Enabled
+                                  Bit[1]=0: DDR-DLL shut-down feature disabled.
+                                         1: DDR-DLL shut-down feature enabled.
+                                  Bit[2]=0: DDR-PLL Power down feature disabled.
+                                         1: DDR-PLL Power down feature enabled.                                 
+ulCPUCapInfo:                     TBD
+usNBP0Voltage:                    VID for voltage on NB P0 State
+usNBP1Voltage:                    VID for voltage on NB P1 State  
+usNBP2Voltage:                    VID for voltage on NB P2 State
+usNBP3Voltage:                    VID for voltage on NB P3 State  
+usBootUpNBVoltage:                Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
+usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+                                  to indicate a range.
+                                  SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
+                                  SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
+                                  SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
+                                  SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
+ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
+ucUMAChannelNumber:      	        System memory channel numbers. 
+ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
+ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
+ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high  
 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. 
 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. 
 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
@@ -4398,6 +4937,41 @@ usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%;
 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
+usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+                                  [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+                                  [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
+                                  [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+                                  [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ucLVDSPwrOnSeqDIGONtoDE_in4Ms:    LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
+                                  =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. 
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnDEtoVARY_BL_in4Ms:     LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).  
+                                  =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. 
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffVARY_BLtoDE_in4Ms:    LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. 
+                                  =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffDEtoDIGON_in4Ms:      LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. 
+                                  =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSOffToOnDelay_in4Ms:         LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. 
+                                  =0 means to use VBIOS default delay which is 125 ( 500ms ).
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOnVARY_BLtoBLON_in4Ms:   LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. 
+                                  =0 means to use VBIOS default delay which is 0 ( 0ms ).
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffBLONtoVARY_BL_in4Ms:  LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. 
+                                  =0 means to use VBIOS default delay which is 0 ( 0ms ).
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ulNbpStateMemclkFreq[4]:          system memory clock frequncey in unit of 10Khz in different NB pstate. 
+
 **********************************************************************************************************************/
 
 /**************************************************************************/
@@ -4459,6 +5033,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
 #define ASIC_INTERNAL_SS_ON_DP      7
 #define ASIC_INTERNAL_SS_ON_DCPLL   8
 #define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
+#define ASIC_INTERNAL_VCE_SS        10
 
 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
 {
@@ -4520,7 +5095,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_DOS_MODE_INFO_DEF        7
 #define ATOM_I2C_CHANNEL_STATUS_DEF   8
 #define ATOM_I2C_CHANNEL_STATUS1_DEF  9
-
+#define ATOM_INTERNAL_TIMER_DEF       10
 
 // BIOS_0_SCRATCH Definition 
 #define ATOM_S0_CRT1_MONO               0x00000001L
@@ -4648,6 +5223,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S2_DEVICE_DPMS_MASKw1      0x3FF
 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3     0x0C
 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3   0x10
+#define ATOM_S2_TMDS_COHERENT_MODEb3    0x10          // used by VBIOS code only, use coherent mode for TMDS/HDMI mode
 #define ATOM_S2_VRI_BRIGHT_ENABLEb3     0x20
 #define ATOM_S2_ROTATION_STATE_MASKb3   0xC0
 
@@ -5038,6 +5614,23 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
   USHORT usDeviceId;                  // Active Device Id for this surface. If no device, set to 0. 
 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
 
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4
+{
+  USHORT usHight;                     // Image Hight
+  USHORT usWidth;                     // Image Width
+  USHORT usGraphPitch;
+  UCHAR  ucColorDepth;
+  UCHAR  ucPixelFormat;
+  UCHAR  ucSurface;                   // Surface 1 or 2
+  UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
+  UCHAR  ucModeType;
+  UCHAR  ucReserved;
+}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4;
+
+// ucEnable
+#define ATOM_GRAPH_CONTROL_SET_PITCH             0x0f
+#define ATOM_GRAPH_CONTROL_SET_DISP_START        0x10
+
 typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
 {
   ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;          
@@ -5057,6 +5650,58 @@ typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
   USHORT  usY_Size;
 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS; 
 
+typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2
+{
+  union{
+    USHORT  usX_Size;                     //When use as input parameter, usX_Size indicates which CRTC                 
+    USHORT  usSurface; 
+  };
+  USHORT usY_Size;
+  USHORT usDispXStart;               
+  USHORT usDispYStart;
+}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2; 
+
+
+typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3 
+{
+  UCHAR  ucLutId;
+  UCHAR  ucAction;
+  USHORT usLutStartIndex;
+  USHORT usLutLength;
+  USHORT usLutOffsetInVram;
+}PALETTE_DATA_CONTROL_PARAMETERS_V3;
+
+// ucAction:
+#define PALETTE_DATA_AUTO_FILL            1
+#define PALETTE_DATA_READ                 2
+#define PALETTE_DATA_WRITE                3
+
+
+typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2
+{
+  UCHAR  ucInterruptId;
+  UCHAR  ucServiceId;
+  UCHAR  ucStatus;
+  UCHAR  ucReserved;
+}INTERRUPT_SERVICE_PARAMETER_V2;
+
+// ucInterruptId
+#define HDP1_INTERRUPT_ID                 1
+#define HDP2_INTERRUPT_ID                 2
+#define HDP3_INTERRUPT_ID                 3
+#define HDP4_INTERRUPT_ID                 4
+#define HDP5_INTERRUPT_ID                 5
+#define HDP6_INTERRUPT_ID                 6
+#define SW_INTERRUPT_ID                   11   
+
+// ucAction
+#define INTERRUPT_SERVICE_GEN_SW_INT      1
+#define INTERRUPT_SERVICE_GET_STATUS      2
+
+ // ucStatus
+#define INTERRUPT_STATUS__INT_TRIGGER     1
+#define INTERRUPT_STATUS__HPD_HIGH        2
+
 typedef struct _INDIRECT_IO_ACCESS
 {
   ATOM_COMMON_TABLE_HEADER sHeader;  
@@ -5189,7 +5834,7 @@ typedef struct _ATOM_INIT_REG_BLOCK{
 
 #define END_OF_REG_INDEX_BLOCK  0x0ffff
 #define END_OF_REG_DATA_BLOCK   0x00000000
-#define ATOM_INIT_REG_MASK_FLAG 0x80
+#define ATOM_INIT_REG_MASK_FLAG 0x80               //Not used in BIOS
 #define	CLOCK_RANGE_HIGHEST			0x00ffffff
 
 #define VALUE_DWORD             SIZEOF ULONG
@@ -5229,6 +5874,7 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
 #define _128Mx8             0x51
 #define _128Mx16            0x52
 #define _256Mx8             0x61
+#define _256Mx16            0x62
 
 #define SAMSUNG             0x1
 #define INFINEON            0x2
@@ -5585,7 +6231,7 @@ typedef struct _ATOM_VRAM_MODULE_V7
   ULONG	  ulChannelMapCfg;	                // mmMC_SHARED_CHREMAP
   USHORT  usModuleSize;                     // Size of ATOM_VRAM_MODULE_V7
   USHORT  usPrivateReserved;                // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
-  USHORT  usReserved;
+  USHORT  usEnableChannels;                 // bit vector which indicate which channels are enabled
   UCHAR   ucExtMemoryID;                    // Current memory module ID
   UCHAR   ucMemoryType;                     // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
   UCHAR   ucChannelNum;                     // Number of mem. channels supported in this module
@@ -5597,7 +6243,8 @@ typedef struct _ATOM_VRAM_MODULE_V7
   UCHAR   ucNPL_RT;                         // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
   UCHAR	  ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
   UCHAR   ucMemorySize;                     // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
-  UCHAR   ucReserved[3];
+  USHORT  usSEQSettingOffset;
+  UCHAR   ucReserved;
 // Memory Module specific values
   USHORT  usEMRS2Value;                     // EMRS2/MR2 Value. 
   USHORT  usEMRS3Value;                     // EMRS3/MR3 Value.
@@ -5633,10 +6280,10 @@ typedef struct _ATOM_VRAM_INFO_V3
 typedef struct _ATOM_VRAM_INFO_V4
 {
   ATOM_COMMON_TABLE_HEADER   sHeader;
-	USHORT										 usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
-	USHORT										 usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
-	USHORT										 usRerseved;
-	UCHAR           	         ucMemDQ7_0ByteRemap;													   // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
+  USHORT                     usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+  USHORT                     usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+  USHORT										 usRerseved;
+  UCHAR           	         ucMemDQ7_0ByteRemap;													   // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
   ULONG                      ulMemDQ7_0BitRemap;                             // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
   UCHAR                      ucReservde[4]; 
   UCHAR                      ucNumOfVRAMModule;
@@ -5648,9 +6295,10 @@ typedef struct _ATOM_VRAM_INFO_V4
 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
 {
   ATOM_COMMON_TABLE_HEADER   sHeader;
-	USHORT										 usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
-	USHORT										 usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
-	USHORT										 usReserved[4];
+  USHORT                     usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+  USHORT                     usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+  USHORT                     usPerBytePresetOffset;                          // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
+  USHORT                     usReserved[3];
   UCHAR                      ucNumOfVRAMModule;                              // indicate number of VRAM module
   UCHAR                      ucMemoryClkPatchTblVer;                         // version of memory AC timing register list
   UCHAR                      ucVramModuleVer;                                // indicate ATOM_VRAM_MODUE version
@@ -5935,6 +6583,52 @@ typedef struct _ATOM_DISP_OUT_INFO_V2
 	ASIC_ENCODER_INFO      asEncoderInfo[1];
 }ATOM_DISP_OUT_INFO_V2;
 
+
+typedef struct _ATOM_DISP_CLOCK_ID {
+  UCHAR ucPpllId; 
+  UCHAR ucPpllAttribute;
+}ATOM_DISP_CLOCK_ID;
+
+// ucPpllAttribute
+#define CLOCK_SOURCE_SHAREABLE            0x01
+#define CLOCK_SOURCE_DP_MODE              0x02
+#define CLOCK_SOURCE_NONE_DP_MODE         0x04
+
+//DispOutInfoTable
+typedef struct _ASIC_TRANSMITTER_INFO_V2
+{
+	USHORT usTransmitterObjId;
+	USHORT usDispClkIdOffset;    // point to clock source id list supported by Encoder Object
+  UCHAR  ucTransmitterCmdTblId;
+	UCHAR  ucConfig;
+	UCHAR  ucEncoderID;					 // available 1st encoder ( default )
+	UCHAR  ucOptionEncoderID;    // available 2nd encoder ( optional )
+	UCHAR  uc2ndEncoderID;
+	UCHAR  ucReserved;
+}ASIC_TRANSMITTER_INFO_V2;
+
+typedef struct _ATOM_DISP_OUT_INFO_V3
+{
+  ATOM_COMMON_TABLE_HEADER sHeader;  
+	USHORT ptrTransmitterInfo;
+	USHORT ptrEncoderInfo;
+  USHORT ptrMainCallParserFar;                  // direct address of main parser call in VBIOS binary. 
+  USHORT usReserved;
+  UCHAR  ucDCERevision;   
+  UCHAR  ucMaxDispEngineNum;
+  UCHAR  ucMaxActiveDispEngineNum;
+  UCHAR  ucMaxPPLLNum;
+  UCHAR  ucCoreRefClkSource;                          // value of CORE_REF_CLK_SOURCE
+  UCHAR  ucReserved[3];
+	ASIC_TRANSMITTER_INFO_V2  asTransmitterInfo[1];     // for alligment only
+}ATOM_DISP_OUT_INFO_V3;
+
+typedef enum CORE_REF_CLK_SOURCE{
+  CLOCK_SRC_XTALIN=0,
+  CLOCK_SRC_XO_IN=1,
+  CLOCK_SRC_XO_IN2=2,
+}CORE_REF_CLK_SOURCE;
+
 // DispDevicePriorityInfo
 typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
 {
@@ -6070,6 +6764,39 @@ typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
 #define HW_I2C_READ         0
 #define I2C_2BYTE_ADDR      0x02
 
+/****************************************************************************/	
+// Structures used by HW_Misc_OperationTable
+/****************************************************************************/	
+typedef struct  _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 
+{
+  UCHAR  ucCmd;                //  Input: To tell which action to take
+  UCHAR  ucReserved[3];
+  ULONG  ulReserved;
+}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1; 
+
+typedef struct  _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1 
+{
+  UCHAR  ucReturnCode;        // Output: Return value base on action was taken
+  UCHAR  ucReserved[3];
+  ULONG  ulReserved;
+}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1;
+
+// Actions code
+#define  ATOM_GET_SDI_SUPPORT              0xF0
+
+// Return code 
+#define  ATOM_UNKNOWN_CMD                   0
+#define  ATOM_FEATURE_NOT_SUPPORTED         1
+#define  ATOM_FEATURE_SUPPORTED             2
+
+typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION
+{
+	ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1        sInput_Output;
+	PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS         sReserved; 
+}ATOM_HW_MISC_OPERATION_PS_ALLOCATION;
+
+/****************************************************************************/	
+
 typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
 {
    UCHAR ucHWBlkInst;                // HW block instance, 0, 1, 2, ...
@@ -6090,6 +6817,52 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
 #define SELECT_CRTC_PIXEL_RATE        7
 #define SELECT_VGA_BLK                8
 
+// DIGTransmitterInfoTable structure used to program UNIPHY settings 
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{  
+  ATOM_COMMON_TABLE_HEADER sHeader;  
+  USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock 
+  USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info 
+  USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+  USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info 
+  USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+}DIG_TRANSMITTER_INFO_HEADER_V3_1;
+
+typedef struct _CLOCK_CONDITION_REGESTER_INFO{
+  USHORT usRegisterIndex;
+  UCHAR  ucStartBit;
+  UCHAR  ucEndBit;
+}CLOCK_CONDITION_REGESTER_INFO;
+
+typedef struct _CLOCK_CONDITION_SETTING_ENTRY{
+  USHORT usMaxClockFreq;
+  UCHAR  ucEncodeMode;
+  UCHAR  ucPhySel;
+  ULONG  ulAnalogSetting[1];
+}CLOCK_CONDITION_SETTING_ENTRY;
+
+typedef struct _CLOCK_CONDITION_SETTING_INFO{
+  USHORT usEntrySize;
+  CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1];
+}CLOCK_CONDITION_SETTING_INFO;
+
+typedef struct _PHY_CONDITION_REG_VAL{
+  ULONG  ulCondition;
+  ULONG  ulRegVal;
+}PHY_CONDITION_REG_VAL;
+
+typedef struct _PHY_CONDITION_REG_INFO{
+  USHORT usRegIndex;
+  USHORT usSize;
+  PHY_CONDITION_REG_VAL asRegVal[1];
+}PHY_CONDITION_REG_INFO;
+
+typedef struct _PHY_ANALOG_SETTING_INFO{
+  UCHAR  ucEncodeMode;
+  UCHAR  ucPhySel;
+  USHORT usSize;
+  PHY_CONDITION_REG_INFO  asAnalogSetting[1];
+}PHY_ANALOG_SETTING_INFO;
+
 /****************************************************************************/	
 //Portion VI: Definitinos for vbios MC scratch registers that driver used
 /****************************************************************************/
@@ -7020,4 +7793,68 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
 
 #pragma pack() // BIOS data must use byte aligment
 
+//
+// AMD ACPI Table
+//
+#pragma pack(1)
+
+typedef struct {
+  ULONG Signature;
+  ULONG TableLength;      //Length
+  UCHAR Revision;
+  UCHAR Checksum;
+  UCHAR OemId[6];
+  UCHAR OemTableId[8];    //UINT64  OemTableId;
+  ULONG OemRevision;
+  ULONG CreatorId;
+  ULONG CreatorRevision;
+} AMD_ACPI_DESCRIPTION_HEADER;
+/*
+//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h
+typedef struct {
+  UINT32  Signature;       //0x0
+  UINT32  Length;          //0x4
+  UINT8   Revision;        //0x8
+  UINT8   Checksum;        //0x9
+  UINT8   OemId[6];        //0xA
+  UINT64  OemTableId;      //0x10
+  UINT32  OemRevision;     //0x18
+  UINT32  CreatorId;       //0x1C
+  UINT32  CreatorRevision; //0x20
+}EFI_ACPI_DESCRIPTION_HEADER;
+*/
+typedef struct {
+  AMD_ACPI_DESCRIPTION_HEADER SHeader;
+  UCHAR TableUUID[16];    //0x24
+  ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
+  ULONG Lib1ImageOffset;  //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
+  ULONG Reserved[4];      //0x3C
+}UEFI_ACPI_VFCT;
+
+typedef struct {
+  ULONG  PCIBus;          //0x4C
+  ULONG  PCIDevice;       //0x50
+  ULONG  PCIFunction;     //0x54
+  USHORT VendorID;        //0x58
+  USHORT DeviceID;        //0x5A
+  USHORT SSVID;           //0x5C
+  USHORT SSID;            //0x5E
+  ULONG  Revision;        //0x60
+  ULONG  ImageLength;     //0x64
+}VFCT_IMAGE_HEADER;
+
+
+typedef struct {
+  VFCT_IMAGE_HEADER	VbiosHeader;
+  UCHAR	VbiosContent[1];
+}GOP_VBIOS_CONTENT;
+
+typedef struct {
+  VFCT_IMAGE_HEADER	Lib1Header;
+  UCHAR	Lib1Content[1];
+}GOP_LIB1_CONTENT;
+
+#pragma pack()
+
+
 #endif /* _ATOMBIOS_H */

[ 56/95] drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>

commit 52e9b39d9a89ae33662596bd30e62dd56bddbe73 upstream.

There is a more recent APU stepping with a new PCI ID
shipping in the same board by Fujitsu which needs the
same quirk to correctly mark the back plane connectors.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_atombios.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index f9c21f9..d67d4f3 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -452,7 +452,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 	}
 
 	/* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */
-	if ((dev->pdev->device == 0x9802) &&
+	if (((dev->pdev->device == 0x9802) || (dev->pdev->device == 0x9806)) &&
 	    (dev->pdev->subsystem_vendor == 0x1734) &&
 	    (dev->pdev->subsystem_device == 0x11bd)) {
 		if (*connector_type == DRM_MODE_CONNECTOR_VGA) {

[ 57/95] drm/radeon: implement ACPI VFCT vbios fetch (v3)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Lamparter <equinox@diac24.net>

commit 268ba0a99f89a84dc5eb312470896113d0709c74 upstream.

This is required for pure UEFI systems.  The vbios is stored
in ACPI rather than at the legacy vga location.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=26891

V2: fix #ifdefs as per Greg's comments
V3: fix it harder

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_bios.c |   60 ++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 501f488..a32232f 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -32,6 +32,7 @@
 
 #include <linux/vga_switcheroo.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 /*
  * BIOS.
  */
@@ -476,6 +477,63 @@ static bool radeon_read_disabled_bios(struct radeon_device *rdev)
 		return legacy_read_disabled_bios(rdev);
 }
 
+#ifdef CONFIG_ACPI
+static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
+{
+	bool ret = false;
+	struct acpi_table_header *hdr;
+	/* acpi_get_table_with_size is not exported :( */
+	acpi_size tbl_size = 0x7fffffff;
+	UEFI_ACPI_VFCT *vfct;
+	GOP_VBIOS_CONTENT *vbios;
+	VFCT_IMAGE_HEADER *vhdr;
+
+	if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr)))
+		return false;
+	if (tbl_size < sizeof(UEFI_ACPI_VFCT)) {
+		DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n");
+		goto out_unmap;
+	}
+
+	vfct = (UEFI_ACPI_VFCT *)hdr;
+	if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) > tbl_size) {
+		DRM_ERROR("ACPI VFCT table present but broken (too short #2)\n");
+		goto out_unmap;
+	}
+
+	vbios = (GOP_VBIOS_CONTENT *)((char *)hdr + vfct->VBIOSImageOffset);
+	vhdr = &vbios->VbiosHeader;
+	DRM_INFO("ACPI VFCT contains a BIOS for %02x:%02x.%d %04x:%04x, size %d\n",
+			vhdr->PCIBus, vhdr->PCIDevice, vhdr->PCIFunction,
+			vhdr->VendorID, vhdr->DeviceID, vhdr->ImageLength);
+
+	if (vhdr->PCIBus != rdev->pdev->bus->number ||
+	    vhdr->PCIDevice != PCI_SLOT(rdev->pdev->devfn) ||
+	    vhdr->PCIFunction != PCI_FUNC(rdev->pdev->devfn) ||
+	    vhdr->VendorID != rdev->pdev->vendor ||
+	    vhdr->DeviceID != rdev->pdev->device) {
+		DRM_INFO("ACPI VFCT table is not for this card\n");
+		goto out_unmap;
+	};
+
+	if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) + vhdr->ImageLength > tbl_size) {
+		DRM_ERROR("ACPI VFCT image truncated\n");
+		goto out_unmap;
+	}
+
+	rdev->bios = kmemdup(&vbios->VbiosContent, vhdr->ImageLength, GFP_KERNEL);
+	ret = !!rdev->bios;
+
+out_unmap:
+	/* uh, no idea what to do here... */
+	return ret;
+}
+#else
+static inline bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
+{
+	return false;
+}
+#endif
 
 bool radeon_get_bios(struct radeon_device *rdev)
 {
@@ -484,6 +542,8 @@ bool radeon_get_bios(struct radeon_device *rdev)
 
 	r = radeon_atrm_get_bios(rdev);
 	if (r == false)
+		r = radeon_acpi_vfct_bios(rdev);
+	if (r == false)
 		r = igp_read_bios_from_vram(rdev);
 	if (r == false)
 		r = radeon_read_bios(rdev);

[ 58/95] ACPI: export symbol acpi_get_table_with_size

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 4f81f986761a7663db7d24d24cd6ae68008f1fc2 upstream.

We need it in the radeon drm module to fetch
and verify the vbios image on UEFI systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/acpi/acpica/tbxface.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index ea4c6d5..29e51bc 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -387,6 +387,7 @@ acpi_get_table_with_size(char *signature,
 
 	return (AE_NOT_FOUND);
 }
+ACPI_EXPORT_SYMBOL(acpi_get_table_with_size)
 
 acpi_status
 acpi_get_table(char *signature,

[ 59/95] drm/radeon: convert radeon vfct code to use acpi_get_table_with_size

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 7c3906d04a4587dceaa78cc1ae6b14e6454ee02a upstream.

Allows us to verify the table size.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_bios.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index a32232f..ab0b2f7 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -482,13 +482,12 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
 {
 	bool ret = false;
 	struct acpi_table_header *hdr;
-	/* acpi_get_table_with_size is not exported :( */
-	acpi_size tbl_size = 0x7fffffff;
+	acpi_size tbl_size;
 	UEFI_ACPI_VFCT *vfct;
 	GOP_VBIOS_CONTENT *vbios;
 	VFCT_IMAGE_HEADER *vhdr;
 
-	if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr)))
+	if (!ACPI_SUCCESS(acpi_get_table_with_size("VFCT", 1, &hdr, &tbl_size)))
 		return false;
 	if (tbl_size < sizeof(UEFI_ACPI_VFCT)) {
 		DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n");
@@ -525,7 +524,6 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
 	ret = !!rdev->bios;
 
 out_unmap:
-	/* uh, no idea what to do here... */
 	return ret;
 }
 #else

[ 60/95] drm/radeon: fix invalid memory access in radeon_atrm_get_bios()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Murzov <intergalactic.anonymous@gmail.com>

commit a3f83ab1a717c0e6c2f59a4cfdaa10707cc35c55 upstream.

At a boot time I observed following bug:

 BUG: unable to handle kernel paging request at ffff8800a4244000
 IP: [<ffffffff81275b5b>] memcpy+0xb/0x120
 PGD 1816063 PUD 1fe7d067 PMD 1ff9f067 PTE 80000000a4244160
 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
 CPU 0
 Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+)
  mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core
  sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi
  joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec
  snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon
  i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc
  loop btrfs

 Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046                           /AMD CRB
 RIP: 0010:[<ffffffff81275b5b>]  [<ffffffff81275b5b>] memcpy+0xb/0x120
 RSP: 0018:ffff8800aa72db00  EFLAGS: 00010246
 RAX: ffff8800a4150000 RBX: 0000000000001000 RCX: 0000000000000087
 RDX: 0000000000000000 RSI: ffff8800a4244000 RDI: ffff8800a4150bc8
 RBP: ffff8800aa72db78 R08: 0000000000000010 R09: ffffffff8174bbec
 R10: ffffffff812ee010 R11: 0000000000000001 R12: 0000000000001000
 R13: 0000000000010000 R14: ffff8800a4140000 R15: ffff8800aaba1800
 FS:  00007ff9a3bd4720(0000) GS:ffff8800afa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff8800a4244000 CR3: 00000000a9c18000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process modprobe (pid: 1008, threadinfo ffff8800aa72c000, task ffff8800aa0e4000)
 Stack:
  ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28
  ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020
  ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000
 Call Trace:
  [<ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon]
  [<ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0
  [<ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon]
  [<ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon]
  [<ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon]
  [<ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon]
  [<ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm]
  [<ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon]
  [<ffffffff81296c5f>] local_pci_probe+0x5f/0xd0
  [<ffffffff81297418>] pci_device_probe+0x88/0xb0
  [<ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0
  [<ffffffff813418d8>] really_probe+0x68/0x180
  [<ffffffff81341be5>] driver_probe_device+0x45/0x70
  [<ffffffff81341cb3>] __driver_attach+0xa3/0xb0
  [<ffffffff81341c10>] ? driver_probe_device+0x70/0x70
  [<ffffffff813400ce>] bus_for_each_dev+0x5e/0x90
  [<ffffffff8134172e>] driver_attach+0x1e/0x20
  [<ffffffff81341298>] bus_add_driver+0xc8/0x280
  [<ffffffff813422c6>] driver_register+0x76/0x140
  [<ffffffff812976d6>] __pci_register_driver+0x66/0xe0
  [<ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm]
  [<ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60
  [<ffffffffa0229000>] ? 0xffffffffa0228fff
  [<ffffffffa02290ec>] radeon_init+0xec/0xee [radeon]
  [<ffffffff810002f2>] do_one_initcall+0x42/0x180
  [<ffffffff8109d8d2>] sys_init_module+0x92/0x1e0
  [<ffffffff815407a9>] system_call_fastpath+0x16/0x1b
 Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb
  e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48
  a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c
 RIP  [<ffffffff81275b5b>] memcpy+0xb/0x120
  RSP <ffff8800aa72db00>
 CR2: ffff8800a4244000
 ---[ end trace fcffa1599cf56382 ]---

Call to acpi_evaluate_object() not always returns 4096 bytes chunks,
on my system it can return 2048 bytes chunk, so pass the length of
retrieved chunk to memcpy(), not the length of the recieving buffer.

Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 9d95792..c666a5b 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -58,7 +58,7 @@ static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios,
 	}
 
 	obj = (union acpi_object *)buffer.pointer;
-	memcpy(bios+offset, obj->buffer.pointer, len);
+	memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
 	kfree(buffer.pointer);
 	return len;
 }

[ 61/95] drm/radeon: finish getting bios earlier

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Murzov <intergalactic.anonymous@gmail.com>

commit 211fa4fc4e13492151e698d92b0dff56b29928ec upstream.

Return a number of bytes read in radeon_atrm_get_bios_chunk() and
properly check this value in radeon_atrm_get_bios().
If radeon_atrm_get_bios_chunk() read less bytes then were requested,
it means that it finished reading bios data.

Prior to this patch, condition in radeon_atrm_get_bios() was always
equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false,
thus radeon_atrm_get_bios() was trying to read past the bios data
wasting boot time.

On my lenovo ideapad u455 laptop this patch drops bios reading time
from ~5.5s to ~1.5s.

Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |    2 +-
 drivers/gpu/drm/radeon/radeon_bios.c         |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index c666a5b..13ac63b 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -60,7 +60,7 @@ static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios,
 	obj = (union acpi_object *)buffer.pointer;
 	memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
 	kfree(buffer.pointer);
-	return len;
+	return obj->buffer.length;
 }
 
 bool radeon_atrm_supported(struct pci_dev *pdev)
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 229a20f..501f488 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -120,7 +120,7 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev)
 		ret = radeon_atrm_get_bios_chunk(rdev->bios,
 						 (i * ATRM_BIOS_PAGE),
 						 ATRM_BIOS_PAGE);
-		if (ret <= 0)
+		if (ret < ATRM_BIOS_PAGE)
 			break;
 	}
 

[ 62/95] drm/radeon: fix use after free in ATRM bios reading code.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit de47a9cd62771e3e78954d855d2304fbad4c5a44 upstream.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=45503

Reported-and-Debugged-by: mlambda@gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 13ac63b..98724fc 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -59,8 +59,9 @@ static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios,
 
 	obj = (union acpi_object *)buffer.pointer;
 	memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
+	len = obj->buffer.length;
 	kfree(buffer.pointer);
-	return obj->buffer.length;
+	return len;
 }
 
 bool radeon_atrm_supported(struct pci_dev *pdev)

[ 63/95] drm/radeon: split ATRM support out from the ATPX handler (v3)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit c61e2775873f603148e8e998a938721b7d222d24 upstream.

There are systems that use ATRM, but not ATPX.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41265

V2: fix #ifdefs as per Greg's comments
V3: fix it harder

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon.h              |   15 -----
 drivers/gpu/drm/radeon/radeon_atpx_handler.c |   56 +-----------------
 drivers/gpu/drm/radeon/radeon_bios.c         |   80 ++++++++++++++++++++++++--
 3 files changed, 77 insertions(+), 74 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 9930419..59a1531 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -142,21 +142,6 @@ struct radeon_device;
 /*
  * BIOS.
  */
-#define ATRM_BIOS_PAGE 4096
-
-#if defined(CONFIG_VGA_SWITCHEROO)
-bool radeon_atrm_supported(struct pci_dev *pdev);
-int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len);
-#else
-static inline bool radeon_atrm_supported(struct pci_dev *pdev)
-{
-	return false;
-}
-
-static inline int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len){
-	return -EINVAL;
-}
-#endif
 bool radeon_get_bios(struct radeon_device *rdev);
 
 
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 98724fc..2a2cf0b 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -30,57 +30,8 @@ static struct radeon_atpx_priv {
 	/* handle for device - and atpx */
 	acpi_handle dhandle;
 	acpi_handle atpx_handle;
-	acpi_handle atrm_handle;
 } radeon_atpx_priv;
 
-/* retrieve the ROM in 4k blocks */
-static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios,
-			    int offset, int len)
-{
-	acpi_status status;
-	union acpi_object atrm_arg_elements[2], *obj;
-	struct acpi_object_list atrm_arg;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL};
-
-	atrm_arg.count = 2;
-	atrm_arg.pointer = &atrm_arg_elements[0];
-
-	atrm_arg_elements[0].type = ACPI_TYPE_INTEGER;
-	atrm_arg_elements[0].integer.value = offset;
-
-	atrm_arg_elements[1].type = ACPI_TYPE_INTEGER;
-	atrm_arg_elements[1].integer.value = len;
-
-	status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer);
-	if (ACPI_FAILURE(status)) {
-		printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status));
-		return -ENODEV;
-	}
-
-	obj = (union acpi_object *)buffer.pointer;
-	memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
-	len = obj->buffer.length;
-	kfree(buffer.pointer);
-	return len;
-}
-
-bool radeon_atrm_supported(struct pci_dev *pdev)
-{
-	/* get the discrete ROM only via ATRM */
-	if (!radeon_atpx_priv.atpx_detected)
-		return false;
-
-	if (radeon_atpx_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
-		return false;
-	return true;
-}
-
-
-int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len)
-{
-	return radeon_atrm_call(radeon_atpx_priv.atrm_handle, bios, offset, len);
-}
-
 static int radeon_atpx_get_version(acpi_handle handle)
 {
 	acpi_status status;
@@ -198,7 +149,7 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id,
 
 static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev)
 {
-	acpi_handle dhandle, atpx_handle, atrm_handle;
+	acpi_handle dhandle, atpx_handle;
 	acpi_status status;
 
 	dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
@@ -209,13 +160,8 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev)
 	if (ACPI_FAILURE(status))
 		return false;
 
-	status = acpi_get_handle(dhandle, "ATRM", &atrm_handle);
-	if (ACPI_FAILURE(status))
-		return false;
-
 	radeon_atpx_priv.dhandle = dhandle;
 	radeon_atpx_priv.atpx_handle = atpx_handle;
-	radeon_atpx_priv.atrm_handle = atrm_handle;
 	return true;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index ab0b2f7..d306cc8 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -99,16 +99,81 @@ static bool radeon_read_bios(struct radeon_device *rdev)
 	return true;
 }
 
+#ifdef CONFIG_ACPI
 /* ATRM is used to get the BIOS on the discrete cards in
  * dual-gpu systems.
  */
+/* retrieve the ROM in 4k blocks */
+#define ATRM_BIOS_PAGE 4096
+/**
+ * radeon_atrm_call - fetch a chunk of the vbios
+ *
+ * @atrm_handle: acpi ATRM handle
+ * @bios: vbios image pointer
+ * @offset: offset of vbios image data to fetch
+ * @len: length of vbios image data to fetch
+ *
+ * Executes ATRM to fetch a chunk of the discrete
+ * vbios image on PX systems (all asics).
+ * Returns the length of the buffer fetched.
+ */
+static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios,
+			    int offset, int len)
+{
+	acpi_status status;
+	union acpi_object atrm_arg_elements[2], *obj;
+	struct acpi_object_list atrm_arg;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL};
+
+	atrm_arg.count = 2;
+	atrm_arg.pointer = &atrm_arg_elements[0];
+
+	atrm_arg_elements[0].type = ACPI_TYPE_INTEGER;
+	atrm_arg_elements[0].integer.value = offset;
+
+	atrm_arg_elements[1].type = ACPI_TYPE_INTEGER;
+	atrm_arg_elements[1].integer.value = len;
+
+	status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer);
+	if (ACPI_FAILURE(status)) {
+		printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status));
+		return -ENODEV;
+	}
+
+	obj = (union acpi_object *)buffer.pointer;
+	memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
+	len = obj->buffer.length;
+	kfree(buffer.pointer);
+	return len;
+}
+
 static bool radeon_atrm_get_bios(struct radeon_device *rdev)
 {
 	int ret;
 	int size = 256 * 1024;
 	int i;
+	struct pci_dev *pdev = NULL;
+	acpi_handle dhandle, atrm_handle;
+	acpi_status status;
+	bool found = false;
 
-	if (!radeon_atrm_supported(rdev->pdev))
+	/* ATRM is for the discrete card only */
+	if (rdev->flags & RADEON_IS_IGP)
+		return false;
+
+	while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) {
+		dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
+		if (!dhandle)
+			continue;
+
+		status = acpi_get_handle(dhandle, "ATRM", &atrm_handle);
+		if (!ACPI_FAILURE(status)) {
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
 		return false;
 
 	rdev->bios = kmalloc(size, GFP_KERNEL);
@@ -118,9 +183,10 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev)
 	}
 
 	for (i = 0; i < size / ATRM_BIOS_PAGE; i++) {
-		ret = radeon_atrm_get_bios_chunk(rdev->bios,
-						 (i * ATRM_BIOS_PAGE),
-						 ATRM_BIOS_PAGE);
+		ret = radeon_atrm_call(atrm_handle,
+				       rdev->bios,
+				       (i * ATRM_BIOS_PAGE),
+				       ATRM_BIOS_PAGE);
 		if (ret < ATRM_BIOS_PAGE)
 			break;
 	}
@@ -131,6 +197,12 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev)
 	}
 	return true;
 }
+#else
+static inline bool radeon_atrm_get_bios(struct radeon_device *rdev)
+{
+	return false;
+}
+#endif
 
 static bool ni_read_disabled_bios(struct radeon_device *rdev)
 {

[ 64/95] NFSv3: Ensure that do_proc_get_root() reports errors correctly

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 086600430493e04b802bee6e5b3ce0458e4eb77f upstream.

If the rpc call to NFS3PROC_FSINFO fails, then we need to report that
error so that the mount fails. Otherwise we can end up with a
superblock with completely unusable values for block sizes, maxfilesize,
etc.

Reported-by: Yuanming Chen <hikvision_linux@163.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/nfs3proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 0952c79..d6b3b5f 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -69,7 +69,7 @@ do_proc_get_root(struct rpc_clnt *client, struct nfs_fh *fhandle,
 	nfs_fattr_init(info->fattr);
 	status = rpc_call_sync(client, &msg, 0);
 	dprintk("%s: reply fsinfo: %d\n", __func__, status);
-	if (!(info->fattr->valid & NFS_ATTR_FATTR)) {
+	if (status == 0 && !(info->fattr->valid & NFS_ATTR_FATTR)) {
 		msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR];
 		msg.rpc_resp = info->fattr;
 		status = rpc_call_sync(client, &msg, 0);

[ 65/95] vfs: missed source of ->f_pos races

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

commit 0e665d5d1125f9f4ccff56a75e814f10f88861a2 upstream.

compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing
as sys_{read,write}{,v}().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/compat.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index 6161255..1bdb350 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1155,11 +1155,14 @@ compat_sys_readv(unsigned long fd, const struct compat_iovec __user *vec,
 	struct file *file;
 	int fput_needed;
 	ssize_t ret;
+	loff_t pos;
 
 	file = fget_light(fd, &fput_needed);
 	if (!file)
 		return -EBADF;
-	ret = compat_readv(file, vec, vlen, &file->f_pos);
+	pos = file->f_pos;
+	ret = compat_readv(file, vec, vlen, &pos);
+	file->f_pos = pos;
 	fput_light(file, fput_needed);
 	return ret;
 }
@@ -1221,11 +1224,14 @@ compat_sys_writev(unsigned long fd, const struct compat_iovec __user *vec,
 	struct file *file;
 	int fput_needed;
 	ssize_t ret;
+	loff_t pos;
 
 	file = fget_light(fd, &fput_needed);
 	if (!file)
 		return -EBADF;
-	ret = compat_writev(file, vec, vlen, &file->f_pos);
+	pos = file->f_pos;
+	ret = compat_writev(file, vec, vlen, &pos);
+	file->f_pos = pos;
 	fput_light(file, fput_needed);
 	return ret;
 }

[ 66/95] svcrpc: fix BUG() in svc_tcp_clear_pages

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit be1e44441a560c43c136a562d49a1c9623c91197 upstream.

Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is
consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if
sk_tcplen would lead us to expect n pages of data).

svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen.
This is OK, since both functions are serialized by XPT_BUSY.  However,
that means the inconsistency must be repaired before dropping XPT_BUSY.

Therefore we should be ensuring that svc_tcp_save_pages repairs the
problem before exiting svc_tcp_recv_record on error.

Symptoms were a BUG() in svc_tcp_clear_pages.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/sunrpc/svcsock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 18bc130..998aa8c 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1129,9 +1129,9 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp)
 	if (len >= 0)
 		svsk->sk_tcplen += len;
 	if (len != want) {
+		svc_tcp_save_pages(svsk, rqstp);
 		if (len < 0 && len != -EAGAIN)
 			goto err_other;
-		svc_tcp_save_pages(svsk, rqstp);
 		dprintk("svc: incomplete TCP record (%d of %d)\n",
 			svsk->sk_tcplen, svsk->sk_reclen);
 		goto err_noclose;

[ 67/95] svcrpc: sends on closed socket should stop immediately

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit f06f00a24d76e168ecb38d352126fd203937b601 upstream.

svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply.
However, the XPT_CLOSE won't be acted on immediately.  Meanwhile other
threads could send further replies before the socket is really shut
down.  This can manifest as data corruption: for example, if a truncated
read reply is followed by another rpc reply, that second reply will look
to the client like further read data.

Symptoms were data corruption preceded by svc_tcp_sendto logging
something like

	kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket

Reported-by: Malahal Naineni <malahal@us.ibm.com>
Tested-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/sunrpc/svc_xprt.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 88f2bf6..0d693a8 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -794,7 +794,8 @@ int svc_send(struct svc_rqst *rqstp)
 
 	/* Grab mutex to serialize outgoing data. */
 	mutex_lock(&xprt->xpt_mutex);
-	if (test_bit(XPT_DEAD, &xprt->xpt_flags))
+	if (test_bit(XPT_DEAD, &xprt->xpt_flags)
+			|| test_bit(XPT_CLOSE, &xprt->xpt_flags))
 		len = -ENOTCONN;
 	else
 		len = xprt->xpt_ops->xpo_sendto(rqstp);

[ 68/95] svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit d10f27a750312ed5638c876e4bd6aa83664cccd8 upstream.

The rpc server tries to ensure that there will be room to send a reply
before it receives a request.

It does this by tracking, in xpt_reserved, an upper bound on the total
size of the replies that is has already committed to for the socket.

Currently it is adding in the estimate for a new reply *before* it
checks whether there is space available.  If it finds that there is not
space, it then subtracts the estimate back out.

This may lead the subsequent svc_xprt_enqueue to decide that there is
space after all.

The results is a svc_recv() that will repeatedly return -EAGAIN, causing
server threads to loop without doing any actual work.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/sunrpc/svc_xprt.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 0d693a8..bac973a 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -316,7 +316,6 @@ static bool svc_xprt_has_something_to_do(struct svc_xprt *xprt)
  */
 void svc_xprt_enqueue(struct svc_xprt *xprt)
 {
-	struct svc_serv	*serv = xprt->xpt_server;
 	struct svc_pool *pool;
 	struct svc_rqst	*rqstp;
 	int cpu;
@@ -362,8 +361,6 @@ void svc_xprt_enqueue(struct svc_xprt *xprt)
 				rqstp, rqstp->rq_xprt);
 		rqstp->rq_xprt = xprt;
 		svc_xprt_get(xprt);
-		rqstp->rq_reserved = serv->sv_max_mesg;
-		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 		pool->sp_stats.threads_woken++;
 		wake_up(&rqstp->rq_wait);
 	} else {
@@ -640,8 +637,6 @@ int svc_recv(struct svc_rqst *rqstp, long timeout)
 	if (xprt) {
 		rqstp->rq_xprt = xprt;
 		svc_xprt_get(xprt);
-		rqstp->rq_reserved = serv->sv_max_mesg;
-		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 
 		/* As there is a shortage of threads and this request
 		 * had to be queued, don't allow the thread to wait so
@@ -738,6 +733,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout)
 		else
 			len = xprt->xpt_ops->xpo_recvfrom(rqstp);
 		dprintk("svc: got len=%d\n", len);
+		rqstp->rq_reserved = serv->sv_max_mesg;
+		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 	}
 	svc_xprt_received(xprt);
 

[ 69/95] Revert "drm/radeon: fix bo creation retry path"

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 676bc2e1e4f9072f7a640d5b7c99ffdf9709a6e7 upstream.

This reverts commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c.

ttm_bo_init() destroys the BO on failure. So this patch makes
the retry path work with freed memory.  This ends up causing
kernel panics when this path is hit.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_object.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -117,6 +117,7 @@ int radeon_bo_create(struct radeon_devic
 		return -ENOMEM;
 	}
 
+retry:
 	bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
 	if (bo == NULL)
 		return -ENOMEM;
@@ -129,8 +130,6 @@ int radeon_bo_create(struct radeon_devic
 	bo->gem_base.driver_private = NULL;
 	bo->surface_reg = -1;
 	INIT_LIST_HEAD(&bo->list);
-
-retry:
 	radeon_ttm_placement_from_domain(bo, domain);
 	/* Kernel allocation are uninterruptible */
 	mutex_lock(&rdev->vram_mutex);

[ 70/95] fbcon: fix race condition between console lock and cursor timer (v1.1)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit d8636a2717bb3da2a7ce2154bf08de90bb8c87b0 upstream.

So we've had a fair few reports of fbcon handover breakage between
efi/vesafb and i915 surface recently, so I dedicated a couple of
days to finding the problem.

Essentially the last thing we saw was the conflicting framebuffer
message and that was all.

So after much tracing with direct netconsole writes (printks
under console_lock not so useful), I think I found the race.

Thread A (driver load)    Thread B (timer thread)
  unbind_con_driver ->              |
  bind_con_driver ->                |
  vc->vc_sw->con_deinit ->          |
  fbcon_deinit ->                   |
  console_lock()                    |
      |                             |
      |                       fbcon_flashcursor timer fires
      |                       console_lock() <- blocked for A
      |
      |
fbcon_del_cursor_timer ->
  del_timer_sync
  (BOOM)

Of course because all of this is under the console lock,
we never see anything, also since we also just unbound the active
console guess what we never see anything.

Hopefully this fixes the problem for anyone seeing vesafb->kms
driver handoff.

v1.1: add comment suggestion from Alan.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/video/console/fbcon.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 2e471c2..88e9204 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -372,8 +372,15 @@ static void fb_flashcursor(struct work_struct *work)
 	struct vc_data *vc = NULL;
 	int c;
 	int mode;
+	int ret;
+
+	/* FIXME: we should sort out the unbind locking instead */
+	/* instead we just fail to flash the cursor if we can't get
+	 * the lock instead of blocking fbcon deinit */
+	ret = console_trylock();
+	if (ret == 0)
+		return;
 
-	console_lock();
 	if (ops && ops->currcon != -1)
 		vc = vc_cons[ops->currcon].d;
 

[ 71/95] cciss: fix incorrect scsi status reporting

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit b0cf0b118c90477d1a6811f2cd2307f6a5578362 upstream.

Delete code which sets SCSI status incorrectly as it's already been set
correctly above this incorrect code.  The bug was introduced in 2009 by
commit b0e15f6db111 ("cciss: fix typo that causes scsi status to be
lost.")

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: Roel van Meer <roel.vanmeer@bokxing.nl>
Tested-by: Roel van Meer <roel.vanmeer@bokxing.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/cciss_scsi.c |   11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index acda773..38aa6dd 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -763,16 +763,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
 		{
 			case CMD_TARGET_STATUS:
 				/* Pass it up to the upper layers... */
-				if( ei->ScsiStatus)
-                		{
-#if 0
-                    			printk(KERN_WARNING "cciss: cmd %p "
-						"has SCSI Status = %x\n",
-						c, ei->ScsiStatus);
-#endif
-					cmd->result |= (ei->ScsiStatus << 1);
-                		}
-				else {  /* scsi status is zero??? How??? */
+				if (!ei->ScsiStatus) {
 					
 	/* Ordinarily, this case should never happen, but there is a bug
 	   in some released firmware revisions that allows it to happen

[ 72/95] mm: hugetlbfs: correctly populate shared pmd

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.cz>

commit eb48c071464757414538c68a6033c8f8c15196f8 upstream.

Each page mapped in a process's address space must be correctly
accounted for in _mapcount.  Normally the rules for this are
straightforward but hugetlbfs page table sharing is different.  The page
table pages at the PMD level are reference counted while the mapcount
remains the same.

If this accounting is wrong, it causes bugs like this one reported by
Larry Woodman:

  kernel BUG at mm/filemap.c:135!
  invalid opcode: 0000 [#1] SMP
  CPU 22
  Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi]
  Pid: 18001, comm: mpitest Tainted: G        W    3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2
  RIP: 0010:[<ffffffff8112cfed>]  [<ffffffff8112cfed>] __delete_from_page_cache+0x15d/0x170
  Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20)
  Call Trace:
    delete_from_page_cache+0x40/0x80
    truncate_hugepages+0x115/0x1f0
    hugetlbfs_evict_inode+0x18/0x30
    evict+0x9f/0x1b0
    iput_final+0xe3/0x1e0
    iput+0x3e/0x50
    d_kill+0xf8/0x110
    dput+0xe2/0x1b0
    __fput+0x162/0x240

During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc()
shared page tables with the check dst_pte == src_pte.  The logic is if
the PMD page is the same, they must be shared.  This assumes that the
sharing is between the parent and child.  However, if the sharing is
with a different process entirely then this check fails as in this
diagram:

  parent
    |
    ------------>pmd
                 src_pte----------> data page
                                        ^
  other--------->pmd--------------------|
                  ^
  child-----------|
                 dst_pte

For this situation to occur, it must be possible for Parent and Other to
have faulted and failed to share page tables with each other.  This is
possible due to the following style of race.

  PROC A                                          PROC B
  copy_hugetlb_page_range                         copy_hugetlb_page_range
    src_pte == huge_pte_offset                      src_pte == huge_pte_offset
    !src_pte so no sharing                          !src_pte so no sharing

  (time passes)

  hugetlb_fault                                   hugetlb_fault
    huge_pte_alloc                                  huge_pte_alloc
      huge_pmd_share                                 huge_pmd_share
        LOCK(i_mmap_mutex)
        find nothing, no sharing
        UNLOCK(i_mmap_mutex)
                                                      LOCK(i_mmap_mutex)
                                                      find nothing, no sharing
                                                      UNLOCK(i_mmap_mutex)
      pmd_alloc                                       pmd_alloc
      LOCK(instantiation_mutex)
      fault
      UNLOCK(instantiation_mutex)
                                                  LOCK(instantiation_mutex)
                                                  fault
                                                  UNLOCK(instantiation_mutex)

These two processes are not poing to the same data page but are not
sharing page tables because the opportunity was missed.  When either
process later forks, the src_pte == dst pte is potentially insufficient.
As the check falls through, the wrong PTE information is copied in
(harmless but wrong) and the mapcount is bumped for a page mapped by a
shared page table leading to the BUG_ON.

This patch addresses the issue by moving pmd_alloc into huge_pmd_share
which guarantees that the shared pud is populated in the same critical
section as pmd.  This also means that huge_pte_offset test in
huge_pmd_share is serialized correctly now which in turn means that the
success of the sharing will be higher as the racing tasks see the pud
and pmd populated together.

Race identified and changelog written mostly by Mel Gorman.

{akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style]
Reported-by: Larry Woodman <lwoodman@redhat.com>
Tested-by: Larry Woodman <lwoodman@redhat.com>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/mm/hugetlbpage.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index f6679a7..b91e485 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr)
 }
 
 /*
- * search for a shareable pmd page for hugetlb.
+ * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc()
+ * and returns the corresponding pte. While this is not necessary for the
+ * !shared pmd case because we can allocate the pmd later as well, it makes the
+ * code much cleaner. pmd allocation is essential for the shared case because
+ * pud has to be populated inside the same i_mmap_mutex section - otherwise
+ * racing tasks could either miss the sharing (see huge_pte_offset) or select a
+ * bad pmd for sharing.
  */
-static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
+static pte_t *
+huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 {
 	struct vm_area_struct *vma = find_vma(mm, addr);
 	struct address_space *mapping = vma->vm_file->f_mapping;
@@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 	struct vm_area_struct *svma;
 	unsigned long saddr;
 	pte_t *spte = NULL;
+	pte_t *pte;
 
 	if (!vma_shareable(vma, addr))
-		return;
+		return (pte_t *)pmd_alloc(mm, pud, addr);
 
 	mutex_lock(&mapping->i_mmap_mutex);
 	vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) {
@@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 		put_page(virt_to_page(spte));
 	spin_unlock(&mm->page_table_lock);
 out:
+	pte = (pte_t *)pmd_alloc(mm, pud, addr);
 	mutex_unlock(&mapping->i_mmap_mutex);
+	return pte;
 }
 
 /*
@@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		} else {
 			BUG_ON(sz != PMD_SIZE);
 			if (pud_none(*pud))
-				huge_pmd_share(mm, addr, pud);
-			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+				pte = huge_pmd_share(mm, addr, pud);
+			else
+				pte = (pte_t *)pmd_alloc(mm, pud, addr);
 		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));

[ 73/95] drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ resources

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robin Holt <holt@sgi.com>

commit 7838f994b4fceff24c343f4e26a6cf4393869579 upstream.

On many of our larger systems, CPU 0 has had all of its IRQ resources
consumed before XPC loads.  Worst cases on machines with multiple 10
GigE cards and multiple IB cards have depleted the entire first socket
of IRQs.

This patch makes selecting the node upon which IRQs are allocated (as
well as all the other GRU Message Queue structures) specifiable as a
module load param and has a default behavior of searching all nodes/cpus
for an available resources.

[akpm@linux-foundation.org: fix build: include cpu.h and module.h]
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/misc/sgi-xp/xpc_uv.c |   84 ++++++++++++++++++++++++++++++++----------
 1 file changed, 65 insertions(+), 19 deletions(-)

diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 87b251a..b9e2000 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -18,6 +18,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <asm/uv/uv_hub.h>
@@ -59,6 +61,8 @@ static struct xpc_heartbeat_uv *xpc_heartbeat_uv;
 					 XPC_NOTIFY_MSG_SIZE_UV)
 #define XPC_NOTIFY_IRQ_NAME		"xpc_notify"
 
+static int xpc_mq_node = -1;
+
 static struct xpc_gru_mq_uv *xpc_activate_mq_uv;
 static struct xpc_gru_mq_uv *xpc_notify_mq_uv;
 
@@ -109,11 +113,8 @@ xpc_get_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq, int cpu, char *irq_name)
 #if defined CONFIG_X86_64
 	mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset,
 			UV_AFFINITY_CPU);
-	if (mq->irq < 0) {
-		dev_err(xpc_part, "uv_setup_irq() returned error=%d\n",
-			-mq->irq);
+	if (mq->irq < 0)
 		return mq->irq;
-	}
 
 	mq->mmr_value = uv_read_global_mmr64(mmr_pnode, mq->mmr_offset);
 
@@ -238,8 +239,9 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name,
 	mq->mmr_blade = uv_cpu_to_blade_id(cpu);
 
 	nid = cpu_to_node(cpu);
-	page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
-				pg_order);
+	page = alloc_pages_exact_node(nid,
+				      GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+				      pg_order);
 	if (page == NULL) {
 		dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
 			"bytes of memory on nid=%d for GRU mq\n", mq_size, nid);
@@ -1731,9 +1733,50 @@ static struct xpc_arch_operations xpc_arch_ops_uv = {
 	.notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv,
 };
 
+static int
+xpc_init_mq_node(int nid)
+{
+	int cpu;
+
+	get_online_cpus();
+
+	for_each_cpu(cpu, cpumask_of_node(nid)) {
+		xpc_activate_mq_uv =
+			xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, nid,
+					     XPC_ACTIVATE_IRQ_NAME,
+					     xpc_handle_activate_IRQ_uv);
+		if (!IS_ERR(xpc_activate_mq_uv))
+			break;
+	}
+	if (IS_ERR(xpc_activate_mq_uv)) {
+		put_online_cpus();
+		return PTR_ERR(xpc_activate_mq_uv);
+	}
+
+	for_each_cpu(cpu, cpumask_of_node(nid)) {
+		xpc_notify_mq_uv =
+			xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, nid,
+					     XPC_NOTIFY_IRQ_NAME,
+					     xpc_handle_notify_IRQ_uv);
+		if (!IS_ERR(xpc_notify_mq_uv))
+			break;
+	}
+	if (IS_ERR(xpc_notify_mq_uv)) {
+		xpc_destroy_gru_mq_uv(xpc_activate_mq_uv);
+		put_online_cpus();
+		return PTR_ERR(xpc_notify_mq_uv);
+	}
+
+	put_online_cpus();
+	return 0;
+}
+
 int
 xpc_init_uv(void)
 {
+	int nid;
+	int ret = 0;
+
 	xpc_arch_ops = xpc_arch_ops_uv;
 
 	if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
@@ -1742,21 +1785,21 @@ xpc_init_uv(void)
 		return -E2BIG;
 	}
 
-	xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0,
-						  XPC_ACTIVATE_IRQ_NAME,
-						  xpc_handle_activate_IRQ_uv);
-	if (IS_ERR(xpc_activate_mq_uv))
-		return PTR_ERR(xpc_activate_mq_uv);
+	if (xpc_mq_node < 0)
+		for_each_online_node(nid) {
+			ret = xpc_init_mq_node(nid);
 
-	xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0,
-						XPC_NOTIFY_IRQ_NAME,
-						xpc_handle_notify_IRQ_uv);
-	if (IS_ERR(xpc_notify_mq_uv)) {
-		xpc_destroy_gru_mq_uv(xpc_activate_mq_uv);
-		return PTR_ERR(xpc_notify_mq_uv);
-	}
+			if (!ret)
+				break;
+		}
+	else
+		ret = xpc_init_mq_node(xpc_mq_node);
 
-	return 0;
+	if (ret < 0)
+		dev_err(xpc_part, "xpc_init_mq_node() returned error=%d\n",
+			-ret);
+
+	return ret;
 }
 
 void
@@ -1765,3 +1808,6 @@ xpc_exit_uv(void)
 	xpc_destroy_gru_mq_uv(xpc_notify_mq_uv);
 	xpc_destroy_gru_mq_uv(xpc_activate_mq_uv);
 }
+
+module_param(xpc_mq_node, int, 0);
+MODULE_PARM_DESC(xpc_mq_node, "Node number on which to allocate message queues.");

[ 74/95] drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour mode

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>

commit 7dbfb315b2aaef0a115765946bf3026d074c33a7 upstream.

Correct the offset by subtracting 20 from tm_hour before taking the
modulo 12.

[ "Why 20?" I hear you ask. Or at least I did.

  Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly -
  included in the RS5C348_HOURS_MASK define.  So it's really subtracting
  out that bit to get "hour+12".  But then because it does things modulo
  12, it needs to add the 12 in again afterwards anyway.

  This code is confused.  It would be much clearer if RS5C348_HOURS_MASK
  just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't
  need to do the silly subtract either.

  Whatever. It's all just math, the end result is the same.   - Linus ]

Reported-by: James Nute <newten82@gmail.com>
Tested-by: James Nute <newten82@gmail.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/rtc/rtc-rs5c348.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-rs5c348.c b/drivers/rtc/rtc-rs5c348.c
index 77074cc..fd5c7af 100644
--- a/drivers/rtc/rtc-rs5c348.c
+++ b/drivers/rtc/rtc-rs5c348.c
@@ -122,9 +122,12 @@ rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK);
 	tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK);
 	if (!pdata->rtc_24h) {
-		tm->tm_hour %= 12;
-		if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM)
+		if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) {
+			tm->tm_hour -= 20;
+			tm->tm_hour %= 12;
 			tm->tm_hour += 12;
+		} else
+			tm->tm_hour %= 12;
 	}
 	tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK);
 	tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK);

[ 75/95] rapidio/tsi721: fix inbound doorbell interrupt handling

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Bounine <alexandre.bounine@idt.com>

commit 3670e7e12e582c6d67761275d148171feb7a9004 upstream.

Make sure that there is no doorbell messages left behind due to disabled
interrupts during inbound doorbell processing.

The most common case for this bug is loss of rionet JOIN messages in
systems with three or more rionet participants and MSI or MSI-X enabled.
As result, requests for packet transfers may finish with "destination
unreachable" error message.

This patch is applicable to kernel versions starting from v3.2.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/rapidio/devices/tsi721.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 722246c..c0d6a04 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -435,6 +435,9 @@ static void tsi721_db_dpc(struct work_struct *work)
 				" info %4.4x\n", DBELL_SID(idb.bytes),
 				DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
 		}
+
+		wr_ptr = ioread32(priv->regs +
+				  TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
 	}
 
 	iowrite32(rd_ptr & (IDB_QSIZE - 1),
@@ -445,6 +448,10 @@ static void tsi721_db_dpc(struct work_struct *work)
 	regval |= TSI721_SR_CHINT_IDBQRCV;
 	iowrite32(regval,
 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+	if (wr_ptr != rd_ptr)
+		schedule_work(&priv->idb_work);
 }
 
 /**

[ 76/95] rapidio/tsi721: fix unused variable compiler warning

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Bounine <alexandre.bounine@idt.com>

commit 9a9a9a7adafe62a34de8b4fb48936c1c5f9bafa5 upstream.

Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG
option off.

This patch is applicable to kernel versions starting from v3.2

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/rapidio/devices/tsi721.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index c0d6a04..5d44252 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -2219,7 +2219,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
 	struct tsi721_device *priv;
-	int i, cap;
+	int cap;
 	int err;
 	u32 regval;
 
@@ -2239,12 +2239,15 @@ static int __devinit tsi721_probe(struct pci_dev *pdev,
 	priv->pdev = pdev;
 
 #ifdef DEBUG
+	{
+	int i;
 	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
 		dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n",
 			i, (unsigned long long)pci_resource_start(pdev, i),
 			(unsigned long)pci_resource_len(pdev, i),
 			pci_resource_flags(pdev, i));
 	}
+	}
 #endif
 	/*
 	 * Verify BAR configuration

[ 77/95] fs/buffer.c: remove BUG() in possible but rare condition

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Glauber Costa <glommer@parallels.com>

commit 61065a30af8df4b8989c2ac7a1f4b4034e4df2d5 upstream.

While stressing the kernel with with failing allocations today, I hit the
following chain of events:

alloc_page_buffers():

	bh = alloc_buffer_head(GFP_NOFS);
	if (!bh)
		goto no_grow; <= path taken

grow_dev_page():
        bh = alloc_page_buffers(page, size, 0);
        if (!bh)
                goto failed;  <= taken, consequence of the above

and then the failed path BUG()s the kernel.

The failure is inserted a litte bit artificially, but even then, I see no
reason why it should be deemed impossible in a real box.

Even though this is not a condition that we expect to see around every
time, failed allocations are expected to be handled, and BUG() sounds just
too much.  As a matter of fact, grow_dev_page() can return NULL just fine
in other circumstances, so I propose we just remove it, then.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/buffer.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 36d6665..351e18e 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -985,7 +985,6 @@ grow_dev_page(struct block_device *bdev, sector_t block,
 	return page;
 
 failed:
-	BUG();
 	unlock_page(page);
 	page_cache_release(page);
 	return NULL;

[ 78/95] block: replace __getblk_slow misfix by grow_dev_page fix

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit 676ce6d5ca3098339c028d44fe0427d1566a4d2d upstream.

Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow")
is not good: a successful call to grow_buffers() cannot guarantee
that the page won't be reclaimed before the immediate next call to
__find_get_block(), which is why there was always a loop there.

Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595:
inode #19278: block 664: comm cc1: unable to read itable block" on console,
which pointed to this commit.

I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs
sometimes fails from a missing header file, under memory pressure on
ppc G5.  I've never seen this on x86, and I've never seen it on 3.5-rc7
itself, despite that commit being in there: bisection pointed to an
irrelevant pinctrl merge, but hard to tell when failure takes between
18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2).

(I've since found such __ext4_get_inode_loc errors in /var/log/messages
from previous weeks: why the message never appeared on console until
yesterday morning is a mystery for another day.)

Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus
a checkpatch nitfix).  Simplify the interface between grow_buffers()
and grow_dev_page(), and avoid the infinite loop beyond end of device
by instead checking init_page_buffers()'s end_block there (I presume
that's more efficient than a repeated call to blkdev_max_block()),
returning -ENXIO to __getblk_slow() in that case.

And remove akpm's ten-year-old "__getblk() cannot fail ... weird"
comment, but that is worrying: are all users of __getblk() really
now prepared for a NULL bh beyond end of device, or will some oops??

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/buffer.c |   66 +++++++++++++++++++++++++++--------------------------------
 1 file changed, 30 insertions(+), 36 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 9f6d2e4..58e2e7b 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -914,7 +914,7 @@ link_dev_buffers(struct page *page, struct buffer_head *head)
 /*
  * Initialise the state of a blockdev page's buffers.
  */ 
-static void
+static sector_t
 init_page_buffers(struct page *page, struct block_device *bdev,
 			sector_t block, int size)
 {
@@ -936,33 +936,41 @@ init_page_buffers(struct page *page, struct block_device *bdev,
 		block++;
 		bh = bh->b_this_page;
 	} while (bh != head);
+
+	/*
+	 * Caller needs to validate requested block against end of device.
+	 */
+	return end_block;
 }
 
 /*
  * Create the page-cache page that contains the requested block.
  *
- * This is user purely for blockdev mappings.
+ * This is used purely for blockdev mappings.
  */
-static struct page *
+static int
 grow_dev_page(struct block_device *bdev, sector_t block,
-		pgoff_t index, int size)
+		pgoff_t index, int size, int sizebits)
 {
 	struct inode *inode = bdev->bd_inode;
 	struct page *page;
 	struct buffer_head *bh;
+	sector_t end_block;
+	int ret = 0;		/* Will call free_more_memory() */
 
 	page = find_or_create_page(inode->i_mapping, index,
 		(mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE);
 	if (!page)
-		return NULL;
+		return ret;
 
 	BUG_ON(!PageLocked(page));
 
 	if (page_has_buffers(page)) {
 		bh = page_buffers(page);
 		if (bh->b_size == size) {
-			init_page_buffers(page, bdev, block, size);
-			return page;
+			end_block = init_page_buffers(page, bdev,
+						index << sizebits, size);
+			goto done;
 		}
 		if (!try_to_free_buffers(page))
 			goto failed;
@@ -982,14 +990,14 @@ grow_dev_page(struct block_device *bdev, sector_t block,
 	 */
 	spin_lock(&inode->i_mapping->private_lock);
 	link_dev_buffers(page, bh);
-	init_page_buffers(page, bdev, block, size);
+	end_block = init_page_buffers(page, bdev, index << sizebits, size);
 	spin_unlock(&inode->i_mapping->private_lock);
-	return page;
-
+done:
+	ret = (block < end_block) ? 1 : -ENXIO;
 failed:
 	unlock_page(page);
 	page_cache_release(page);
-	return NULL;
+	return ret;
 }
 
 /*
@@ -999,7 +1007,6 @@ failed:
 static int
 grow_buffers(struct block_device *bdev, sector_t block, int size)
 {
-	struct page *page;
 	pgoff_t index;
 	int sizebits;
 
@@ -1023,22 +1030,14 @@ grow_buffers(struct block_device *bdev, sector_t block, int size)
 			bdevname(bdev, b));
 		return -EIO;
 	}
-	block = index << sizebits;
+
 	/* Create a page with the proper size buffers.. */
-	page = grow_dev_page(bdev, block, index, size);
-	if (!page)
-		return 0;
-	unlock_page(page);
-	page_cache_release(page);
-	return 1;
+	return grow_dev_page(bdev, block, index, size, sizebits);
 }
 
 static struct buffer_head *
 __getblk_slow(struct block_device *bdev, sector_t block, int size)
 {
-	int ret;
-	struct buffer_head *bh;
-
 	/* Size must be multiple of hard sectorsize */
 	if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
 			(size < 512 || size > PAGE_SIZE))) {
@@ -1051,21 +1050,20 @@ __getblk_slow(struct block_device *bdev, sector_t block, int size)
 		return NULL;
 	}
 
-retry:
-	bh = __find_get_block(bdev, block, size);
-	if (bh)
-		return bh;
+	for (;;) {
+		struct buffer_head *bh;
+		int ret;
 
-	ret = grow_buffers(bdev, block, size);
-	if (ret == 0) {
-		free_more_memory();
-		goto retry;
-	} else if (ret > 0) {
 		bh = __find_get_block(bdev, block, size);
 		if (bh)
 			return bh;
+
+		ret = grow_buffers(bdev, block, size);
+		if (ret < 0)
+			return NULL;
+		if (ret == 0)
+			free_more_memory();
 	}
-	return NULL;
 }
 
 /*
@@ -1321,10 +1319,6 @@ EXPORT_SYMBOL(__find_get_block);
  * which corresponds to the passed block_device, block and size. The
  * returned buffer has its reference count incremented.
  *
- * __getblk() cannot fail - it just keeps trying.  If you pass it an
- * illegal block number, __getblk() will happily return a buffer_head
- * which represents the non-existent block.  Very weird.
- *
  * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
  * attempt is failing.  FIXME, perhaps?
  */

[ 79/95] Bluetooth: Fix using uninitialized option in RFCMode

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Szymon Janc <szymon.janc@tieto.com>

commit 8f321f853ea33330c7141977cd34804476e2e07e upstream.

If remote device sends bogus RFC option with invalid length,
undefined options values are used. Fix this by using defaults when
remote misbehaves.

This also fixes the following warning reported by gcc 4.7.0:

net/bluetooth/l2cap_core.c: In function 'l2cap_config_rsp':
net/bluetooth/l2cap_core.c:3302:13: warning: 'rfc.max_pdu_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.max_pdu_size' was declared here
net/bluetooth/l2cap_core.c:3298:25: warning: 'rfc.monitor_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.monitor_timeout' was declared here
net/bluetooth/l2cap_core.c:3297:25: warning: 'rfc.retrans_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.retrans_timeout' was declared here
net/bluetooth/l2cap_core.c:3295:2: warning: 'rfc.mode' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.mode' was declared here

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/l2cap_core.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 8394e36..4554e80 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2915,12 +2915,14 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
 
-		switch (type) {
-		case L2CAP_CONF_RFC:
-			if (olen == sizeof(rfc))
-				memcpy(&rfc, (void *)val, olen);
-			goto done;
-		}
+		if (type != L2CAP_CONF_RFC)
+			continue;
+
+		if (olen != sizeof(rfc))
+			break;
+
+		memcpy(&rfc, (void *)val, olen);
+		goto done;
 	}
 
 	/* Use sane default values in case a misbehaving remote device

[ 80/95] drivers/char/random.c: fix boot id uniqueness race

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

commit 44e4360fa3384850d65dd36fb4e6e5f2f112709b upstream.

/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/char/random.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 54ca8b2..4ec04a7 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1260,10 +1260,15 @@ static int proc_do_uuid(ctl_table *table, int write,
 	uuid = table->data;
 	if (!uuid) {
 		uuid = tmp_uuid;
-		uuid[8] = 0;
-	}
-	if (uuid[8] == 0)
 		generate_random_uuid(uuid);
+	} else {
+		static DEFINE_SPINLOCK(bootid_spinlock);
+
+		spin_lock(&bootid_spinlock);
+		if (!uuid[8])
+			generate_random_uuid(uuid);
+		spin_unlock(&bootid_spinlock);
+	}
 
 	sprintf(buf, "%pU", uuid);
 

[ 81/95] MAINTAINERS: Theodore Tso is taking over the random driver

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 330e0a01d54c2b8606c56816f99af6ebc58ec92c upstream.

Matt Mackall stepped down as the /dev/random driver maintainer last
year, so Theodore Ts'o is taking back the /dev/random driver.

Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 MAINTAINERS |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index eb22272..335c525 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5634,7 +5634,7 @@ F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-M:	Matt Mackall <mpm@selenic.com>
+M:	Theodore Ts'o" <tytso@mit.edu>
 S:	Maintained
 F:	drivers/char/random.c
 

[ 82/95] random: Add comment to random_initialize()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Luck <tony.luck@intel.com>

commit cbc96b7594b5691d61eba2db8b2ea723645be9ca upstream.

Many platforms have per-machine instance data (serial numbers,
asset tags, etc.) squirreled away in areas that are accessed
during early system bringup. Mixing this data into the random
pools has a very high value in providing better random data,
so we should allow (and even encourage) architecture code to
call add_device_randomness() from the setup_arch() paths.

However, this limits our options for internal structure of
the random driver since random_initialize() is not called
until long after setup_arch().

Add a big fat comment to rand_initialize() spelling out
this requirement.

Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/char/random.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 9793b40..1a2dfa8 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1087,6 +1087,16 @@ static void init_std_data(struct entropy_store *r)
 	mix_pool_bytes(r, utsname(), sizeof(*(utsname())), NULL);
 }
 
+/*
+ * Note that setup_arch() may call add_device_randomness()
+ * long before we get here. This allows seeding of the pools
+ * with some platform dependent data very early in the boot
+ * process. But it limits our options here. We must use
+ * statically allocated structures that already have all
+ * initializations complete at compile time. We should also
+ * take care not to overwrite the precious per platform data
+ * we were given.
+ */
 static int rand_initialize(void)
 {
 	init_std_data(&input_pool);

[ 83/95] dmi: Feed DMI table to /dev/random driver

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Luck <tony.luck@intel.com>

commit d114a33387472555188f142ed8e98acdb8181c6d upstream.

Send the entire DMI (SMBIOS) table to the /dev/random driver to
help seed its pools.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/firmware/dmi_scan.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 153980b..b298158 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -6,6 +6,7 @@
 #include <linux/dmi.h>
 #include <linux/efi.h>
 #include <linux/bootmem.h>
+#include <linux/random.h>
 #include <asm/dmi.h>
 
 /*
@@ -111,6 +112,8 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
 
 	dmi_table(buf, dmi_len, dmi_num, decode, NULL);
 
+	add_device_randomness(buf, dmi_len);
+
 	dmi_iounmap(buf, dmi_len);
 	return 0;
 }

[ 84/95] virtio_blk: fix config handler race

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Michael S. Tsirkin" <mst@redhat.com>

commit 4678d6f970c2f7c0cbfefc0cc666432d153b321b upstream.

Fix a theoretical race related to config work
handler: a config interrupt might happen
after we flush config work but before we
reset the device. It will then cause the
config work to run during or after reset.

Two problems with this:
- if this runs after device is gone we will get use after free
- access of config while reset is in progress is racy
(as layout is changing).

As a solution
1. flush after reset when we know there will be no more interrupts
2. add a flag to disable config access before reset

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/virtio_blk.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index a345e40..ba73661 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -4,6 +4,7 @@
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/virtio.h>
 #include <linux/virtio_blk.h>
 #include <linux/scatterlist.h>
@@ -36,6 +37,12 @@ struct virtio_blk
 	/* Process context for config space updates */
 	struct work_struct config_work;
 
+	/* Lock for config space updates */
+	struct mutex config_lock;
+
+	/* enable config space updates */
+	bool config_enable;
+
 	/* What host tells us, plus 2 for header & tailer. */
 	unsigned int sg_elems;
 
@@ -318,6 +325,10 @@ static void virtblk_config_changed_work(struct work_struct *work)
 	char cap_str_2[10], cap_str_10[10];
 	u64 capacity, size;
 
+	mutex_lock(&vblk->config_lock);
+	if (!vblk->config_enable)
+		goto done;
+
 	/* Host must always specify the capacity. */
 	vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
 			  &capacity, sizeof(capacity));
@@ -340,6 +351,8 @@ static void virtblk_config_changed_work(struct work_struct *work)
 		  cap_str_10, cap_str_2);
 
 	set_capacity(vblk->disk, capacity);
+done:
+	mutex_unlock(&vblk->config_lock);
 }
 
 static void virtblk_config_changed(struct virtio_device *vdev)
@@ -388,7 +401,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 	vblk->vdev = vdev;
 	vblk->sg_elems = sg_elems;
 	sg_init_table(vblk->sg, vblk->sg_elems);
+	mutex_init(&vblk->config_lock);
 	INIT_WORK(&vblk->config_work, virtblk_config_changed_work);
+	vblk->config_enable = true;
 
 	/* We expect one virtqueue, for output. */
 	vblk->vq = virtio_find_single_vq(vdev, blk_done, "requests");
@@ -542,7 +557,10 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 	struct virtio_blk *vblk = vdev->priv;
 	int index = vblk->index;
 
-	flush_work(&vblk->config_work);
+	/* Prevent config work handler from accessing the device. */
+	mutex_lock(&vblk->config_lock);
+	vblk->config_enable = false;
+	mutex_unlock(&vblk->config_lock);
 
 	/* Nothing should be pending. */
 	BUG_ON(!list_empty(&vblk->reqs));
@@ -550,6 +568,8 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
+	flush_work(&vblk->config_work);
+
 	del_gendisk(vblk->disk);
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);

Re: [ 84/95] virtio_blk: fix config handler race

[Rusty Russell]

Ben Hutchings <ben@decadent.org.uk> writes:

> 3.2-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: "Michael S. Tsirkin" <mst@redhat.com>
>
> commit 4678d6f970c2f7c0cbfefc0cc666432d153b321b upstream.
>
> Fix a theoretical race related to config work

???

>From Documentation/stable_kernel_rules.txt:

 - No "theoretical race condition" issues, unless an explanation of how the
   race can be exploited is also provided.

Similarly, '[ 85/95] virtio_blk: Drop unused request tracking list'
is a marginal perf improvement, why is it in there?

Neither of these were cc:stable; did someone request them specifically?

Confused,
Rusty.

Re: [ 84/95] virtio_blk: fix config handler race

[Asias He]

On 09/10/2012 10:26 AM, Rusty Russell wrote:
> Ben Hutchings <ben@decadent.org.uk> writes:
> 
>> 3.2-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: "Michael S. Tsirkin" <mst@redhat.com>
>>
>> commit 4678d6f970c2f7c0cbfefc0cc666432d153b321b upstream.
>>
>> Fix a theoretical race related to config work
> 
> ???
> 
> From Documentation/stable_kernel_rules.txt:
> 
>  - No "theoretical race condition" issues, unless an explanation of how the
>    race can be exploited is also provided.
> 
> Similarly, '[ 85/95] virtio_blk: Drop unused request tracking list'
> is a marginal perf improvement, why is it in there?

This also drops the following line which may trigger a BUG in hot
-unplug path.

       /* Nothing should be pending. */
       BUG_ON(!list_empty(&vblk->reqs));

So, this patch is needed to fix up the hot-unplug bug along with the others.

> 
> Neither of these were cc:stable; did someone request them specifically?
> 
> Confused,
> Rusty.
> 


-- 
Asias

Re: [ 84/95] virtio_blk: fix config handler race

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1315 bytes --]

On Mon, 2012-09-10 at 11:56 +0930, Rusty Russell wrote:
> Ben Hutchings <ben@decadent.org.uk> writes:
> 
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: "Michael S. Tsirkin" <mst@redhat.com>
> >
> > commit 4678d6f970c2f7c0cbfefc0cc666432d153b321b upstream.
> >
> > Fix a theoretical race related to config work
> 
> ???
> 
> From Documentation/stable_kernel_rules.txt:
> 
>  - No "theoretical race condition" issues, unless an explanation of how the
>    race can be exploited is also provided.
> 
> Similarly, '[ 85/95] virtio_blk: Drop unused request tracking list'
> is a marginal perf improvement, why is it in there?
> 
> Neither of these were cc:stable; did someone request them specifically?

They weren't requested; I think I included them as apparent dependencies
of one or more of the others:

b79d866 virtio-blk: Fix hot-unplug race in remove method
02e2b12 virtio-blk: Call del_gendisk() before disable guest kick
483001c virtio-blk: Reset device after blk_cleanup_queue()

The last of those was cc'd to stable and the first two were applied in
3.5.2, thus I assume requested by someone.

Ben.

-- 
Ben Hutchings
Make three consecutive correct guesses and you will be considered an expert.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

[ 85/95] virtio_blk: Drop unused request tracking list

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asias He <asias@redhat.com>

commit f65ca1dc6a8c81c6bd72297d4399ec5f4c1f3a01 upstream.

Benchmark shows small performance improvement on fusion io device.

Before:
  seq-read : io=1,024MB, bw=19,982KB/s, iops=39,964, runt= 52475msec
  seq-write: io=1,024MB, bw=20,321KB/s, iops=40,641, runt= 51601msec
  rnd-read : io=1,024MB, bw=15,404KB/s, iops=30,808, runt= 68070msec
  rnd-write: io=1,024MB, bw=14,776KB/s, iops=29,552, runt= 70963msec

After:
  seq-read : io=1,024MB, bw=20,343KB/s, iops=40,685, runt= 51546msec
  seq-write: io=1,024MB, bw=20,803KB/s, iops=41,606, runt= 50404msec
  rnd-read : io=1,024MB, bw=16,221KB/s, iops=32,442, runt= 64642msec
  rnd-write: io=1,024MB, bw=15,199KB/s, iops=30,397, runt= 68991msec

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/virtio_blk.c |   10 ----------
 1 file changed, 10 deletions(-)

--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -27,9 +27,6 @@ struct virtio_blk
 	/* The disk structure for the kernel. */
 	struct gendisk *disk;
 
-	/* Request tracking. */
-	struct list_head reqs;
-
 	mempool_t *pool;
 
 	/* Process context for config space updates */
@@ -53,7 +50,6 @@ struct virtio_blk
 
 struct virtblk_req
 {
-	struct list_head list;
 	struct request *req;
 	struct virtio_blk_outhdr out_hdr;
 	struct virtio_scsi_inhdr in_hdr;
@@ -97,7 +93,6 @@ static void blk_done(struct virtqueue *v
 		}
 
 		__blk_end_request_all(vbr->req, error);
-		list_del(&vbr->list);
 		mempool_free(vbr, vblk->pool);
 	}
 	/* In case queue is stopped waiting for more buffers. */
@@ -182,7 +177,6 @@ static bool do_req(struct request_queue
 		return false;
 	}
 
-	list_add_tail(&vbr->list, &vblk->reqs);
 	return true;
 }
 
@@ -394,7 +388,6 @@ static int __devinit virtblk_probe(struc
 		goto out_free_index;
 	}
 
-	INIT_LIST_HEAD(&vblk->reqs);
 	vblk->vdev = vdev;
 	vblk->sg_elems = sg_elems;
 	sg_init_table(vblk->sg, vblk->sg_elems);
@@ -559,9 +552,6 @@ static void __devexit virtblk_remove(str
 	vblk->config_enable = false;
 	mutex_unlock(&vblk->config_lock);
 
-	/* Nothing should be pending. */
-	BUG_ON(!list_empty(&vblk->reqs));
-
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 

[ 86/95] virtio-blk: Fix hot-unplug race in remove method

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asias He <asias@redhat.com>

commit b79d866c8b7014a51f611a64c40546109beaf24a upstream.

If we reset the virtio-blk device before the requests already dispatched
to the virtio-blk driver from the block layer are finised, we will stuck
in blk_cleanup_queue() and the remove will fail.

blk_cleanup_queue() calls blk_drain_queue() to drain all requests queued
before DEAD marking. However it will never success if the device is
already stopped. We'll have q->in_flight[] > 0, so the drain will not
finish.

How to reproduce the race:
1. hot-plug a virtio-blk device
2. keep reading/writing the device in guest
3. hot-unplug while the device is busy serving I/O

Test:
~1000 rounds of hot-plug/hot-unplug test passed with this patch.

Changes in v3:
- Drop blk_abort_queue and blk_abort_request
- Use __blk_end_request_all to complete request dispatched to driver

Changes in v2:
- Drop req_in_flight
- Use virtqueue_detach_unused_buf to get request dispatched to driver

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/virtio_blk.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0d39f2f..9d2223b 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -583,6 +583,8 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
 	int index = vblk->index;
+	struct virtblk_req *vbr;
+	unsigned long flags;
 
 	/* Prevent config work handler from accessing the device. */
 	mutex_lock(&vblk->config_lock);
@@ -598,6 +600,15 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 	flush_work(&vblk->config_work);
 
 	del_gendisk(vblk->disk);
+
+	/* Abort requests dispatched to driver. */
+	spin_lock_irqsave(&vblk->lock, flags);
+	while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
+		__blk_end_request_all(vbr->req, -EIO);
+		mempool_free(vbr, vblk->pool);
+	}
+	spin_unlock_irqrestore(&vblk->lock, flags);
+
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);

[ 87/95] virtio-blk: Call del_gendisk() before disable guest kick

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asias He <asias@redhat.com>

commit 02e2b124943648fba0a2ccee5c3656a5653e0151 upstream.

del_gendisk() might not return due to failing to remove the
/sys/block/vda/serial sysfs entry when another thread (udev) is
trying to read it.

virtblk_remove()
  vdev->config->reset() : guest will not kick us through interrupt
    del_gendisk()
      device_del()
        kobject_del(): got stuck, sysfs entry ref count non zero

sysfs_open_file(): user space process read /sys/block/vda/serial
   sysfs_get_active() : got sysfs entry ref count
      dev_attr_show()
        virtblk_serial_show()
           blk_execute_rq() : got stuck, interrupt is disabled
                              request cannot be finished

This patch fixes it by calling del_gendisk() before we disable guest's
interrupt so that the request sent in virtblk_serial_show() will be
finished and del_gendisk() will success.

This fixes another race in hot-unplug process.

It is save to call del_gendisk(vblk->disk) before
flush_work(&vblk->config_work) which might access vblk->disk, because
vblk->disk is not freed until put_disk(vblk->disk).

Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/virtio_blk.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 693187d..1bed517 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -584,13 +584,13 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 	vblk->config_enable = false;
 	mutex_unlock(&vblk->config_lock);
 
+	del_gendisk(vblk->disk);
+
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
 	flush_work(&vblk->config_work);
 
-	del_gendisk(vblk->disk);
-
 	/* Abort requests dispatched to driver. */
 	spin_lock_irqsave(&vblk->lock, flags);
 	while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {

[ 88/95] virtio-blk: Reset device after blk_cleanup_queue()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asias He <asias@redhat.com>

commit 483001c765af6892b3fc3726576cb42f17d1d6b5 upstream.

blk_cleanup_queue() will call blk_drian_queue() to drain all the
requests before queue DEAD marking. If we reset the device before
blk_cleanup_queue() the drain would fail.

1) if the queue is stopped in do_virtblk_request() because device is
full, the q->request_fn() will not be called.

blk_drain_queue() {
   while(true) {
      ...
      if (!list_empty(&q->queue_head))
        __blk_run_queue(q) {
	    if (queue is not stoped)
		q->request_fn()
	}
      ...
   }
}

Do no reset the device before blk_cleanup_queue() gives the chance to
start the queue in interrupt handler blk_done().

2) In commit b79d866c8b7014a51f611a64c40546109beaf24a, We abort requests
dispatched to driver before blk_cleanup_queue(). There is a race if
requests are dispatched to driver after the abort and before the queue
DEAD mark. To fix this, instead of aborting the requests explicitly, we
can just reset the device after after blk_cleanup_queue so that the
device can complete all the requests before queue DEAD marking in the
drain process.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/virtio_blk.c |   12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 1bed517..b4fa2d7 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -576,8 +576,6 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
 	int index = vblk->index;
-	struct virtblk_req *vbr;
-	unsigned long flags;
 
 	/* Prevent config work handler from accessing the device. */
 	mutex_lock(&vblk->config_lock);
@@ -585,21 +583,13 @@ static void __devexit virtblk_remove(struct virtio_device *vdev)
 	mutex_unlock(&vblk->config_lock);
 
 	del_gendisk(vblk->disk);
+	blk_cleanup_queue(vblk->disk->queue);
 
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
 	flush_work(&vblk->config_work);
 
-	/* Abort requests dispatched to driver. */
-	spin_lock_irqsave(&vblk->lock, flags);
-	while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
-		__blk_end_request_all(vbr->req, -EIO);
-		mempool_free(vbr, vblk->pool);
-	}
-	spin_unlock_irqrestore(&vblk->lock, flags);
-
-	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);
 	vdev->config->del_vqs(vdev);

[ 89/95] HID: add support for Cypress barcode scanner 04B4:ED81

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lionel Vaux <lionel.vaux@free.fr>

commit 76c9d8fe2c7fc34ffc387d8022c5828d6ff9df48 upstream.

Add yet another device to the list of Cypress barcode scanners
needing the CP_RDESC_SWAPPED_MIN_MAX quirk.

Signed-off-by: Lionel Vaux (iouri) <lionel.vaux@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/hid-core.c    |    1 +
 drivers/hid/hid-cypress.c |    2 ++
 drivers/hid/hid-ids.h     |    1 +
 3 files changed, 4 insertions(+)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1405,6 +1405,7 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
--- a/drivers/hid/hid-cypress.c
+++ b/drivers/hid/hid-cypress.c
@@ -129,6 +129,8 @@ static const struct hid_device_id cp_dev
 		.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3),
 		.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_4),
+		.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE),
 		.driver_data = CP_2WHEEL_MOUSE_HACK },
 	{ }
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -226,6 +226,7 @@
 #define USB_DEVICE_ID_CYPRESS_BARCODE_1	0xde61
 #define USB_DEVICE_ID_CYPRESS_BARCODE_2	0xde64
 #define USB_DEVICE_ID_CYPRESS_BARCODE_3	0xbca1
+#define USB_DEVICE_ID_CYPRESS_BARCODE_4	0xed81
 #define USB_DEVICE_ID_CYPRESS_TRUETOUCH	0xc001
 
 #define USB_VENDOR_ID_DEALEXTREAME	0x10c5

[ 90/95] pmac_zilog,kdb: Fix console poll hook to return instead of loop

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wessel <jason.wessel@windriver.com>

commit 38f8eefccf3a23c4058a570fa2938a4f553cf8e0 upstream.

kdb <-> kgdb transitioning does not work properly with this UART
driver because the get character routine loops indefinitely as opposed
to returning NO_POLL_CHAR per the expectation of the KDB I/O driver
API.

The symptom is a kernel hang when trying to switch debug modes.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/tty/serial/pmac_zilog.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 654755a..333c8d0 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1348,10 +1348,16 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
 static int pmz_poll_get_char(struct uart_port *port)
 {
 	struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+	int tries = 2;
 
-	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
-		udelay(5);
-	return read_zsdata(uap);
+	while (tries) {
+		if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0)
+			return read_zsdata(uap);
+		if (tries--)
+			udelay(5);
+	}
+
+	return NO_POLL_CHAR;
 }
 
 static void pmz_poll_put_char(struct uart_port *port, unsigned char c)

[ 91/95] Staging: speakup: fix an improperly-declared variable.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christopher Brannon <chris@the-brannons.com>

commit 4ea418b8b2fa8a70d0fcc8231b65e67b3a72984b upstream.

A local static variable was declared as a pointer to a string
constant.  We're assigning to the underlying memory, so it
needs to be an array instead.

Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/speakup/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c
index 92b34e2..40e2488 100644
--- a/drivers/staging/speakup/main.c
+++ b/drivers/staging/speakup/main.c
@@ -1854,7 +1854,7 @@ static void speakup_bits(struct vc_data *vc)
 
 static int handle_goto(struct vc_data *vc, u_char type, u_char ch, u_short key)
 {
-	static u_char *goto_buf = "\0\0\0\0\0\0";
+	static u_char goto_buf[8];
 	static int num;
 	int maxlen, go_pos;
 	char *cp;

[ 92/95] NFS: Fix Oopses in nfs_lookup_revalidate and nfs4_lookup_revalidate

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

Fix the following Oops in 3.5.1:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
 PGD 337c63067 PUD 0
 Oops: 0000 [#1] SMP
 CPU 5
 Modules linked in: nfs fscache nfsd lockd nfs_acl auth_rpcgss sunrpc af_packet binfmt_misc cpufreq_conservative cpufreq_userspace cpufreq_powersave dm_mod acpi_cpufreq mperf coretemp gpio_ich kvm_intel joydev kvm ioatdma hid_generic igb lpc_ich i7core_edac edac_core ptp serio_raw dca pcspkr i2c_i801 mfd_core sg pps_core usbhid crc32c_intel microcode button autofs4 uhci_hcd ttm drm_kms_helper drm i2c_algo_bit sysimgblt sysfillrect syscopyarea ehci_hcd usbcore usb_common scsi_dh_rdac scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh edd fan ata_piix thermal processor thermal_sys

 Pid: 30431, comm: java Not tainted 3.5.1-2-default #1 Supermicro X8DTT/X8DTT
 RIP: 0010:[<ffffffffa03789cd>]  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
 RSP: 0018:ffff8801b418bd38  EFLAGS: 00010292
 RAX: 00000000fffffff6 RBX: ffff88032016d800 RCX: 0000000000000020
 RDX: ffffffff00000000 RSI: 0000000000000000 RDI: ffff8801824a7b00
 RBP: ffff8801b418bdf8 R08: 7fffff0034323030 R09: fffffffff04c03ed
 R10: ffff8801824a7b00 R11: 0000000000000002 R12: ffff8801824a7b00
 R13: ffff8801824a7b00 R14: 0000000000000000 R15: ffff8803201725d0
 FS:  00002b53a46cb700(0000) GS:ffff88033fc20000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000038 CR3: 000000020a426000 CR4: 00000000000007e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process java (pid: 30431, threadinfo ffff8801b418a000, task ffff8801b5d20600)
 Stack:
  ffff8801b418be44 ffff88032016d800 ffff8801b418bdf8 0000000000000000
  ffff8801824a7b00 ffff8801b418bdd7 ffff8803201725d0 ffffffff8116a9c0
  ffff8801b5c38dc0 0000000000000007 ffff88032016d800 0000000000000000
 Call Trace:
  [<ffffffff8116a9c0>] lookup_dcache+0x80/0xe0
  [<ffffffff8116aa43>] __lookup_hash+0x23/0x90
  [<ffffffff8116b4a5>] lookup_one_len+0xc5/0x100
  [<ffffffffa03869a3>] nfs_sillyrename+0xe3/0x210 [nfs]
  [<ffffffff8116cadf>] vfs_unlink.part.25+0x7f/0xe0
  [<ffffffff8116f22c>] do_unlinkat+0x1ac/0x1d0
  [<ffffffff815717b9>] system_call_fastpath+0x16/0x1b
  [<00002b5348b5f527>] 0x2b5348b5f526
 Code: ec 38 b8 f6 ff ff ff 4c 89 64 24 18 4c 89 74 24 28 49 89 fc 48 89 5c 24 08 48 89 6c 24 10 49 89 f6 4c 89 6c 24 20 4c 89 7c 24 30 <f6> 46 38 40 0f 85 d1 00 00 00 e8 c4 c4 df e0 48 8b 58 30 49 89
 RIP  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
  RSP <ffff8801b418bd38>
 CR2: 0000000000000038
 ---[ end trace 845113ed191985dd ]---

This Oops affects 3.5 kernels and older, and is due to lookup_one_len()
calling down to the dentry revalidation code with a NULL pointer
to struct nameidata.

It is fixed upstream by commit 0b728e1911c (stop passing nameidata *
to ->d_revalidate())

Reported-by: Richard Ems <richard.ems@cape-horn-eng.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/dir.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1103,7 +1103,7 @@ static int nfs_lookup_revalidate(struct
 	struct nfs_fattr *fattr = NULL;
 	int error;
 
-	if (nd->flags & LOOKUP_RCU)
+	if (nd && (nd->flags & LOOKUP_RCU))
 		return -ECHILD;
 
 	parent = dget_parent(dentry);
@@ -1508,7 +1508,7 @@ static int nfs_open_revalidate(struct de
 	struct nfs_open_context *ctx;
 	int openflags, ret = 0;
 
-	if (nd->flags & LOOKUP_RCU)
+	if (nd && (nd->flags & LOOKUP_RCU))
 		return -ECHILD;
 
 	inode = dentry->d_inode;

Re: [ 92/95] NFS: Fix Oopses in nfs_lookup_revalidate and nfs4_lookup_revalidate

[Suresh Jayaraman]

On 09/10/2012 04:13 AM, Ben Hutchings wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Trond Myklebust <Trond.Myklebust@netapp.com>
> 
> Fix the following Oops in 3.5.1:
> 
>  BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
>  IP: [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
>  PGD 337c63067 PUD 0
>  Oops: 0000 [#1] SMP
>  CPU 5
>  Modules linked in: nfs fscache nfsd lockd nfs_acl auth_rpcgss sunrpc af_packet binfmt_misc cpufreq_conservative cpufreq_userspace cpufreq_powersave dm_mod acpi_cpufreq mperf coretemp gpio_ich kvm_intel joydev kvm ioatdma hid_generic igb lpc_ich i7core_edac edac_core ptp serio_raw dca pcspkr i2c_i801 mfd_core sg pps_core usbhid crc32c_intel microcode button autofs4 uhci_hcd ttm drm_kms_helper drm i2c_algo_bit sysimgblt sysfillrect syscopyarea ehci_hcd usbcore usb_common scsi_dh_rdac scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh edd fan ata_piix thermal processor thermal_sys
> 
>  Pid: 30431, comm: java Not tainted 3.5.1-2-default #1 Supermicro X8DTT/X8DTT
>  RIP: 0010:[<ffffffffa03789cd>]  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
>  RSP: 0018:ffff8801b418bd38  EFLAGS: 00010292
>  RAX: 00000000fffffff6 RBX: ffff88032016d800 RCX: 0000000000000020
>  RDX: ffffffff00000000 RSI: 0000000000000000 RDI: ffff8801824a7b00
>  RBP: ffff8801b418bdf8 R08: 7fffff0034323030 R09: fffffffff04c03ed
>  R10: ffff8801824a7b00 R11: 0000000000000002 R12: ffff8801824a7b00
>  R13: ffff8801824a7b00 R14: 0000000000000000 R15: ffff8803201725d0
>  FS:  00002b53a46cb700(0000) GS:ffff88033fc20000(0000) knlGS:0000000000000000
>  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>  CR2: 0000000000000038 CR3: 000000020a426000 CR4: 00000000000007e0
>  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>  Process java (pid: 30431, threadinfo ffff8801b418a000, task ffff8801b5d20600)
>  Stack:
>   ffff8801b418be44 ffff88032016d800 ffff8801b418bdf8 0000000000000000
>   ffff8801824a7b00 ffff8801b418bdd7 ffff8803201725d0 ffffffff8116a9c0
>   ffff8801b5c38dc0 0000000000000007 ffff88032016d800 0000000000000000
>  Call Trace:
>   [<ffffffff8116a9c0>] lookup_dcache+0x80/0xe0
>   [<ffffffff8116aa43>] __lookup_hash+0x23/0x90
>   [<ffffffff8116b4a5>] lookup_one_len+0xc5/0x100
>   [<ffffffffa03869a3>] nfs_sillyrename+0xe3/0x210 [nfs]
>   [<ffffffff8116cadf>] vfs_unlink.part.25+0x7f/0xe0
>   [<ffffffff8116f22c>] do_unlinkat+0x1ac/0x1d0
>   [<ffffffff815717b9>] system_call_fastpath+0x16/0x1b
>   [<00002b5348b5f527>] 0x2b5348b5f526
>  Code: ec 38 b8 f6 ff ff ff 4c 89 64 24 18 4c 89 74 24 28 49 89 fc 48 89 5c 24 08 48 89 6c 24 10 49 89 f6 4c 89 6c 24 20 4c 89 7c 24 30 <f6> 46 38 40 0f 85 d1 00 00 00 e8 c4 c4 df e0 48 8b 58 30 49 89
>  RIP  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
>   RSP <ffff8801b418bd38>
>  CR2: 0000000000000038
>  ---[ end trace 845113ed191985dd ]---
> 
> This Oops affects 3.5 kernels and older, and is due to lookup_one_len()
> calling down to the dentry revalidation code with a NULL pointer
> to struct nameidata.

Hmm.. in this case which filesystem is calling nfs_lookup_revalidate()
with NULL nd?

A similar patch has already been NACKed by Trond as it could break NFS
exclusive creates. The discussion thread can be found here

   http://www.spinics.net/lists/linux-nfs/msg20932.html



Thanks
Suresh

[ 93/95] asus-nb-wmi: add some video toggle keys

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AceLan Kao <acelan.kao@canonical.com>

commit 3766054fff4af1b58a1440a284907887f4d2e8be upstream.

There are some new video switch keys that used by newer machines.
0xA0 - SDSP HDMI only
0xA1 - SDSP LCD + HDMI
0xA2 - SDSP CRT + HDMI
0xA3 - SDSP TV + HDMI
But in Linux, there is no suitable userspace application to handle this,
so, mapping them all to KEY_SWITCHVIDEOMODE.

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/platform/x86/asus-nb-wmi.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 57712ff..6b0ebde 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -192,6 +192,10 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0x8A, { KEY_PROG1 } },
 	{ KE_KEY, 0x95, { KEY_MEDIA } },
 	{ KE_KEY, 0x99, { KEY_PHONE } },
+	{ KE_KEY, 0xA0, { KEY_SWITCHVIDEOMODE } }, /* SDSP HDMI only */
+	{ KE_KEY, 0xA1, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + HDMI */
+	{ KE_KEY, 0xA2, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + HDMI */
+	{ KE_KEY, 0xA3, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + HDMI */
 	{ KE_KEY, 0xb5, { KEY_CALC } },
 	{ KE_KEY, 0xc4, { KEY_KBDILLUMUP } },
 	{ KE_KEY, 0xc5, { KEY_KBDILLUMDOWN } },

[ 94/95] Squashfs: fix mount time sanity check for corrupted superblock

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Phillip Lougher <phillip@squashfs.org.uk>

commit cc37f75a9ffbbfcb1c3297534f293c8284e3c5a6 upstream.

A Squashfs filesystem containing nothing but an empty directory,
although unusual and ultimately pointless, is still valid.

The directory_table >= next_table sanity check rejects these
filesystems as invalid because the directory_table is empty and
equal to next_table.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/squashfs/super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 2da1715..4619247 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -290,7 +290,7 @@ handle_fragments:
 
 check_directory_table:
 	/* Sanity check directory_table */
-	if (msblk->directory_table >= next_table) {
+	if (msblk->directory_table > next_table) {
 		err = -EINVAL;
 		goto failed_mount;
 	}

[ 95/95] mm: avoid swapping out with swappiness==0

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Satoru Moriya <satoru.moriya@hds.com>

commit fe35004fbf9eaf67482b074a2e032abb9c89b1dd upstream.

Sometimes we'd like to avoid swapping out anonymous memory.  In
particular, avoid swapping out pages of important process or process
groups while there is a reasonable amount of pagecache on RAM so that we
can satisfy our customers' requirements.

OTOH, we can control how aggressive the kernel will swap memory pages with
/proc/sys/vm/swappiness for global and
/sys/fs/cgroup/memory/memory.swappiness for each memcg.

But with current reclaim implementation, the kernel may swap out even if
we set swappiness=0 and there is pagecache in RAM.

This patch changes the behavior with swappiness==0.  If we set
swappiness==0, the kernel does not swap out completely (for global reclaim
until the amount of free pages and filebacked pages in a zone has been
reduced to something very very small (nr_free + nr_filebacked < high
watermark)).

Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - vmscan_swappiness() does not have a zone parameter]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 mm/vmscan.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1977,10 +1977,10 @@ static void get_scan_count(struct zone *
 	 * proportional to the fraction of recently scanned pages on
 	 * each list that were recently referenced and in active use.
 	 */
-	ap = (anon_prio + 1) * (reclaim_stat->recent_scanned[0] + 1);
+	ap = anon_prio * (reclaim_stat->recent_scanned[0] + 1);
 	ap /= reclaim_stat->recent_rotated[0] + 1;
 
-	fp = (file_prio + 1) * (reclaim_stat->recent_scanned[1] + 1);
+	fp = file_prio * (reclaim_stat->recent_scanned[1] + 1);
 	fp /= reclaim_stat->recent_rotated[1] + 1;
 	spin_unlock_irq(&zone->lru_lock);
 
@@ -1993,7 +1993,7 @@ out:
 		unsigned long scan;
 
 		scan = zone_nr_lru_pages(zone, sc, l);
-		if (priority || noswap) {
+		if (priority || noswap || !vmscan_swappiness(sc)) {
 			scan >>= priority;
 			if (!scan && force_scan)
 				scan = SWAP_CLUSTER_MAX;