* Re: [lm-sensors] Support for Intel H77
2012-09-15 6:46 [lm-sensors] Support for Intel H77 Jonas Vasiliauskas
@ 2012-09-15 14:50 ` Guenter Roeck
2012-09-15 18:53 ` Jonas Vasiliauskas
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2012-09-15 14:50 UTC (permalink / raw)
To: lm-sensors
On Sat, Sep 15, 2012 at 09:46:11AM +0300, Jonas Vasiliauskas wrote:
> Hi there,
>
> I hope you are doing well. Is there full support for intel h77 chip
> ? I'm able to read temperatures using coretemp module, but can't
> anyhow read fan speeds, not sure, maybe there is no support on
> sensors for this chip ? Its one of the most decent, but not sure,
> maybe you guys know how to get fan RPMs on console ? ;)
>
First of all, that is not a H77 (PCH) question, but a board question, and
primarily depends on the SuperIO chip used on your board. Also, your board
specification will tell you if the board uses the SuperIO chip or MEI for fan
control.
You might want to try running the latest version of sensors-detect (from
http://www.lm-sensors.org/wiki/Download). That should tell you which SuperIO
chip is used. Intel often uses Nuvoton NCT6775F. If so, use the driver at
https://github.com/groeck/nct6775 and check if it handles fan control.
If it does, you are lucky. If not, fan control may be handled by MEI (again,
your motherboard specification should tell you that). In that case, you'll
have to wait for someone to write a MEI fan control driver (or write one
yourself ;).
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [lm-sensors] Support for Intel H77
2012-09-15 6:46 [lm-sensors] Support for Intel H77 Jonas Vasiliauskas
2012-09-15 14:50 ` Guenter Roeck
@ 2012-09-15 18:53 ` Jonas Vasiliauskas
2012-09-15 20:26 ` Guenter Roeck
2012-09-15 20:29 ` Jonas Vasiliauskas
3 siblings, 0 replies; 5+ messages in thread
From: Jonas Vasiliauskas @ 2012-09-15 18:53 UTC (permalink / raw)
To: lm-sensors
Hi,
thanks for the explanation. I got one more problem, now its the module
you wrote, I'm getting this when trying to compile:
[root@NEUTRINO nct6775]# make
make[1]: *** No rule to make target `modules'. Stop.
make: *** [modules] Error 2
[root@NEUTRINO nct6775]# make modules
make[1]: *** No rule to make target `modules'. Stop.
make: *** [modules] Error 2
[root@NEUTRINO nct6775]# make all
make[1]: *** No rule to make target `modules'. Stop.
make: *** [modules] Error 2
Also, here is my MakeFile http://pastebin.ca/2204518
Can you please tell me what is wrong ? I'm not sure is it either
makefile buggy or I'm doing something wrong.
Thanks,
On 9/15/2012 17:50 PM, Guenter Roeck wrote:
> On Sat, Sep 15, 2012 at 09:46:11AM +0300, Jonas Vasiliauskas wrote:
>> Hi there,
>>
>> I hope you are doing well. Is there full support for intel h77 chip
>> ? I'm able to read temperatures using coretemp module, but can't
>> anyhow read fan speeds, not sure, maybe there is no support on
>> sensors for this chip ? Its one of the most decent, but not sure,
>> maybe you guys know how to get fan RPMs on console ? ;)
>>
> First of all, that is not a H77 (PCH) question, but a board question, and
> primarily depends on the SuperIO chip used on your board. Also, your board
> specification will tell you if the board uses the SuperIO chip or MEI for fan
> control.
>
> You might want to try running the latest version of sensors-detect (from
> http://www.lm-sensors.org/wiki/Download). That should tell you which SuperIO
> chip is used. Intel often uses Nuvoton NCT6775F. If so, use the driver at
> https://github.com/groeck/nct6775 and check if it handles fan control.
> If it does, you are lucky. If not, fan control may be handled by MEI (again,
> your motherboard specification should tell you that). In that case, you'll
> have to wait for someone to write a MEI fan control driver (or write one
> yourself ;).
>
> Thanks,
> Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [lm-sensors] Support for Intel H77
2012-09-15 6:46 [lm-sensors] Support for Intel H77 Jonas Vasiliauskas
2012-09-15 14:50 ` Guenter Roeck
2012-09-15 18:53 ` Jonas Vasiliauskas
@ 2012-09-15 20:26 ` Guenter Roeck
2012-09-15 20:29 ` Jonas Vasiliauskas
3 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2012-09-15 20:26 UTC (permalink / raw)
To: lm-sensors
On Sat, Sep 15, 2012 at 09:53:57PM +0300, Jonas Vasiliauskas wrote:
> Hi,
>
> thanks for the explanation. I got one more problem, now its the
> module you wrote, I'm getting this when trying to compile:
>
> [root@NEUTRINO nct6775]# make
> make[1]: *** No rule to make target `modules'. Stop.
> make: *** [modules] Error 2
> [root@NEUTRINO nct6775]# make modules
> make[1]: *** No rule to make target `modules'. Stop.
> make: *** [modules] Error 2
> [root@NEUTRINO nct6775]# make all
> make[1]: *** No rule to make target `modules'. Stop.
> make: *** [modules] Error 2
>
>
> Also, here is my MakeFile http://pastebin.ca/2204518
>
Where do the "<------>" strings in the Makefile come from ?
That is definitely not ok. Is there some tab corruption ?
Guenter
> Can you please tell me what is wrong ? I'm not sure is it either
> makefile buggy or I'm doing something wrong.
>
> Thanks,
> On 9/15/2012 17:50 PM, Guenter Roeck wrote:
> >On Sat, Sep 15, 2012 at 09:46:11AM +0300, Jonas Vasiliauskas wrote:
> >>Hi there,
> >>
> >>I hope you are doing well. Is there full support for intel h77 chip
> >>? I'm able to read temperatures using coretemp module, but can't
> >>anyhow read fan speeds, not sure, maybe there is no support on
> >>sensors for this chip ? Its one of the most decent, but not sure,
> >>maybe you guys know how to get fan RPMs on console ? ;)
> >>
> >First of all, that is not a H77 (PCH) question, but a board question, and
> >primarily depends on the SuperIO chip used on your board. Also, your board
> >specification will tell you if the board uses the SuperIO chip or MEI for fan
> >control.
> >
> >You might want to try running the latest version of sensors-detect (from
> >http://www.lm-sensors.org/wiki/Download). That should tell you which SuperIO
> >chip is used. Intel often uses Nuvoton NCT6775F. If so, use the driver at
> >https://github.com/groeck/nct6775 and check if it handles fan control.
> >If it does, you are lucky. If not, fan control may be handled by MEI (again,
> >your motherboard specification should tell you that). In that case, you'll
> >have to wait for someone to write a MEI fan control driver (or write one
> >yourself ;).
> >
> >Thanks,
> >Guenter
>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [lm-sensors] Support for Intel H77
2012-09-15 6:46 [lm-sensors] Support for Intel H77 Jonas Vasiliauskas
` (2 preceding siblings ...)
2012-09-15 20:26 ` Guenter Roeck
@ 2012-09-15 20:29 ` Jonas Vasiliauskas
3 siblings, 0 replies; 5+ messages in thread
From: Jonas Vasiliauskas @ 2012-09-15 20:29 UTC (permalink / raw)
To: lm-sensors
It was just from MC editor, they are harmless, sorry if this confused
you. Here is the proper output: http://pastebin.ca/2204537
On 9/15/2012 23:26 PM, Guenter Roeck wrote:
> On Sat, Sep 15, 2012 at 09:53:57PM +0300, Jonas Vasiliauskas wrote:
>> Hi,
>>
>> thanks for the explanation. I got one more problem, now its the
>> module you wrote, I'm getting this when trying to compile:
>>
>> [root@NEUTRINO nct6775]# make
>> make[1]: *** No rule to make target `modules'. Stop.
>> make: *** [modules] Error 2
>> [root@NEUTRINO nct6775]# make modules
>> make[1]: *** No rule to make target `modules'. Stop.
>> make: *** [modules] Error 2
>> [root@NEUTRINO nct6775]# make all
>> make[1]: *** No rule to make target `modules'. Stop.
>> make: *** [modules] Error 2
>>
>>
>> Also, here is my MakeFile http://pastebin.ca/2204518
>>
> Where do the "<------>" strings in the Makefile come from ?
> That is definitely not ok. Is there some tab corruption ?
>
> Guenter
>
>> Can you please tell me what is wrong ? I'm not sure is it either
>> makefile buggy or I'm doing something wrong.
>>
>> Thanks,
>> On 9/15/2012 17:50 PM, Guenter Roeck wrote:
>>> On Sat, Sep 15, 2012 at 09:46:11AM +0300, Jonas Vasiliauskas wrote:
>>>> Hi there,
>>>>
>>>> I hope you are doing well. Is there full support for intel h77 chip
>>>> ? I'm able to read temperatures using coretemp module, but can't
>>>> anyhow read fan speeds, not sure, maybe there is no support on
>>>> sensors for this chip ? Its one of the most decent, but not sure,
>>>> maybe you guys know how to get fan RPMs on console ? ;)
>>>>
>>> First of all, that is not a H77 (PCH) question, but a board question, and
>>> primarily depends on the SuperIO chip used on your board. Also, your board
>>> specification will tell you if the board uses the SuperIO chip or MEI for fan
>>> control.
>>>
>>> You might want to try running the latest version of sensors-detect (from
>>> http://www.lm-sensors.org/wiki/Download). That should tell you which SuperIO
>>> chip is used. Intel often uses Nuvoton NCT6775F. If so, use the driver at
>>> https://github.com/groeck/nct6775 and check if it handles fan control.
>>> If it does, you are lucky. If not, fan control may be handled by MEI (again,
>>> your motherboard specification should tell you that). In that case, you'll
>>> have to wait for someone to write a MEI fan control driver (or write one
>>> yourself ;).
>>>
>>> Thanks,
>>> Guenter
>>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread