All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: Avi Kivity <avi@redhat.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [RfC PATCH] vga: add mmio bar to standard vga
Date: Wed, 19 Sep 2012 13:35:09 +0200	[thread overview]
Message-ID: <5059ADED.9000504@redhat.com> (raw)
In-Reply-To: <50598D7E.8010909@redhat.com>

[-- Attachment #1: Type: text/plain, Size: 1031 bytes --]

>> + *   0x0400 -> 0x041f  vga ioports (0x3c0 -> 0x3df), remapped 1:1
> 
> Do they support word accesses to set both index and data?
> 
>> + *   0x0500 -> 0x0515  bochs dispi interface registers, mapped flat without
>> + *                     index/data ports.  Use (index << 1) as offset for
>> + *                     (16bit) register access.
>> + */
> 
> BAR should disappear with -M old.

Sure.  I have a patch in flight which adds the pc-1.3 machine type, once
this is in I can easily add the compat stuff.

>> +static const MemoryRegionOps pci_vga_ioport_ops = {
>> +    .read = pci_vga_ioport_read,
>> +    .write = pci_vga_ioport_write,
>> +    .valid.min_access_size = 1,
>> +    .valid.max_access_size = 4,
>> +    .impl.min_access_size = 1,
>> +    .impl.max_access_size = 1,
>> +    .endianness = DEVICE_LITTLE_ENDIAN,
>> +};
> 
> Looks like word writes are supported provided the memory API breaks up
> writes in little endian order.  Better to make it explicit.

Like the attached incremental patch?

cheers,
  Gerd


[-- Attachment #2: 0001-fixup-vga-mmio.patch --]
[-- Type: text/plain, Size: 1752 bytes --]

>From d46b14dfd74dcc37fe187dc76cd681ad7dbff2d5 Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 19 Sep 2012 13:31:04 +0200
Subject: [PATCH] [fixup] vga mmio

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/vga-pci.c |   25 ++++++++++++++++++++++---
 1 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/hw/vga-pci.c b/hw/vga-pci.c
index e05e2ef..7fd305d 100644
--- a/hw/vga-pci.c
+++ b/hw/vga-pci.c
@@ -78,14 +78,33 @@ static uint64_t pci_vga_ioport_read(void *ptr, target_phys_addr_t addr,
                                     unsigned size)
 {
     PCIVGAState *d = ptr;
-    return vga_ioport_read(&d->vga, addr);
+    uint64_t ret = 0;
+
+    switch (size) {
+    case 1:
+        ret = vga_ioport_read(&d->vga, addr);
+        break;
+    case 2:
+        ret  = vga_ioport_read(&d->vga, addr);
+        ret |= vga_ioport_read(&d->vga, addr+1) << 8;
+        break;
+    }
+    return ret;
 }
 
 static void pci_vga_ioport_write(void *ptr, target_phys_addr_t addr,
                                  uint64_t val, unsigned size)
 {
     PCIVGAState *d = ptr;
-    vga_ioport_write(&d->vga, addr, val);
+    switch (size) {
+    case 1:
+        vga_ioport_write(&d->vga, addr, val);
+        break;
+    case 2:
+        vga_ioport_write(&d->vga, addr, val & 0xff);
+        vga_ioport_write(&d->vga, addr+1, (val >> 8) & 0xff);
+        break;
+    }
 }
 
 static const MemoryRegionOps pci_vga_ioport_ops = {
@@ -94,7 +113,7 @@ static const MemoryRegionOps pci_vga_ioport_ops = {
     .valid.min_access_size = 1,
     .valid.max_access_size = 4,
     .impl.min_access_size = 1,
-    .impl.max_access_size = 1,
+    .impl.max_access_size = 2,
     .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Gerd Hoffmann <kraxel@redhat.com>
To: Avi Kivity <avi@redhat.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org
Subject: Re: [Qemu-devel] [RfC PATCH] vga: add mmio bar to standard vga
Date: Wed, 19 Sep 2012 13:35:09 +0200	[thread overview]
Message-ID: <5059ADED.9000504@redhat.com> (raw)
In-Reply-To: <50598D7E.8010909@redhat.com>

[-- Attachment #1: Type: text/plain, Size: 1031 bytes --]

>> + *   0x0400 -> 0x041f  vga ioports (0x3c0 -> 0x3df), remapped 1:1
> 
> Do they support word accesses to set both index and data?
> 
>> + *   0x0500 -> 0x0515  bochs dispi interface registers, mapped flat without
>> + *                     index/data ports.  Use (index << 1) as offset for
>> + *                     (16bit) register access.
>> + */
> 
> BAR should disappear with -M old.

Sure.  I have a patch in flight which adds the pc-1.3 machine type, once
this is in I can easily add the compat stuff.

>> +static const MemoryRegionOps pci_vga_ioport_ops = {
>> +    .read = pci_vga_ioport_read,
>> +    .write = pci_vga_ioport_write,
>> +    .valid.min_access_size = 1,
>> +    .valid.max_access_size = 4,
>> +    .impl.min_access_size = 1,
>> +    .impl.max_access_size = 1,
>> +    .endianness = DEVICE_LITTLE_ENDIAN,
>> +};
> 
> Looks like word writes are supported provided the memory API breaks up
> writes in little endian order.  Better to make it explicit.

Like the attached incremental patch?

cheers,
  Gerd


[-- Attachment #2: 0001-fixup-vga-mmio.patch --]
[-- Type: text/plain, Size: 1752 bytes --]

>From d46b14dfd74dcc37fe187dc76cd681ad7dbff2d5 Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 19 Sep 2012 13:31:04 +0200
Subject: [PATCH] [fixup] vga mmio

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/vga-pci.c |   25 ++++++++++++++++++++++---
 1 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/hw/vga-pci.c b/hw/vga-pci.c
index e05e2ef..7fd305d 100644
--- a/hw/vga-pci.c
+++ b/hw/vga-pci.c
@@ -78,14 +78,33 @@ static uint64_t pci_vga_ioport_read(void *ptr, target_phys_addr_t addr,
                                     unsigned size)
 {
     PCIVGAState *d = ptr;
-    return vga_ioport_read(&d->vga, addr);
+    uint64_t ret = 0;
+
+    switch (size) {
+    case 1:
+        ret = vga_ioport_read(&d->vga, addr);
+        break;
+    case 2:
+        ret  = vga_ioport_read(&d->vga, addr);
+        ret |= vga_ioport_read(&d->vga, addr+1) << 8;
+        break;
+    }
+    return ret;
 }
 
 static void pci_vga_ioport_write(void *ptr, target_phys_addr_t addr,
                                  uint64_t val, unsigned size)
 {
     PCIVGAState *d = ptr;
-    vga_ioport_write(&d->vga, addr, val);
+    switch (size) {
+    case 1:
+        vga_ioport_write(&d->vga, addr, val);
+        break;
+    case 2:
+        vga_ioport_write(&d->vga, addr, val & 0xff);
+        vga_ioport_write(&d->vga, addr+1, (val >> 8) & 0xff);
+        break;
+    }
 }
 
 static const MemoryRegionOps pci_vga_ioport_ops = {
@@ -94,7 +113,7 @@ static const MemoryRegionOps pci_vga_ioport_ops = {
     .valid.min_access_size = 1,
     .valid.max_access_size = 4,
     .impl.min_access_size = 1,
-    .impl.max_access_size = 1,
+    .impl.max_access_size = 2,
     .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
-- 
1.7.1


  reply	other threads:[~2012-09-19 11:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-18  9:51 [RfC PATCH] vga: add mmio bar to standard vga Gerd Hoffmann
2012-09-18  9:51 ` [Qemu-devel] " Gerd Hoffmann
2012-09-18 10:32 ` Benjamin Herrenschmidt
2012-09-18 10:32   ` [Qemu-devel] " Benjamin Herrenschmidt
2012-09-18 11:49   ` Gerd Hoffmann
2012-09-18 11:49     ` [Qemu-devel] " Gerd Hoffmann
2012-09-19  9:16 ` Avi Kivity
2012-09-19  9:16   ` [Qemu-devel] " Avi Kivity
2012-09-19 11:35   ` Gerd Hoffmann [this message]
2012-09-19 11:35     ` Gerd Hoffmann
2012-09-19 12:13     ` Avi Kivity
2012-09-19 12:13       ` [Qemu-devel] " Avi Kivity
2012-09-19 18:45 ` Blue Swirl
2012-09-20  5:43   ` Gerd Hoffmann
2012-09-22 12:12     ` Blue Swirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5059ADED.9000504@redhat.com \
    --to=kraxel@redhat.com \
    --cc=avi@redhat.com \
    --cc=benh@kernel.crashing.org \
    --cc=kvm@vger.kernel.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.