* [PATCH v5 1/5] ARM: tegra: dts: Add pwm label
@ 2012-09-20 15:06 Thierry Reding
[not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Thierry Reding @ 2012-09-20 15:06 UTC (permalink / raw)
To: Stephen Warren; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA
PWM devices can be referenced in the DT by phandle and per-chip index.
In order for this to work properly, the PWM controller needs to have a
label attached to it.
Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
---
arch/arm/boot/dts/tegra20.dtsi | 2 +-
arch/arm/boot/dts/tegra30.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 405d167..67a6cd9 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,7 +123,7 @@
status = "disabled";
};
- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 3e4334d..b1497c7 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -117,7 +117,7 @@
status = "disabled";
};
- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
--
1.7.12
^ permalink raw reply related [flat|nested] 6+ messages in thread[parent not found: <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>]
* [PATCH v5 2/5] ARM: tegra: Add Avionic Design Tamonten support [not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> @ 2012-09-20 15:06 ` Thierry Reding 2012-09-20 15:06 ` [PATCH v5 3/5] ARM: tegra: Add Avionic Design Plutux support Thierry Reding ` (3 subsequent siblings) 4 siblings, 0 replies; 6+ messages in thread From: Thierry Reding @ 2012-09-20 15:06 UTC (permalink / raw) To: Stephen Warren; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA The Tamonten is an NVIDIA Tegra2 based system-on-module (SOM) that is designed to cover a broad range of applications. Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> --- Changes in v5: - fixup regulator names and voltages Changes in v4: - synchronize regulators with Harmony for consistency - set bus width of MMC to 4 --- arch/arm/boot/dts/tegra20-tamonten.dtsi | 449 ++++++++++++++++++++++++++++++++ 1 file changed, 449 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-tamonten.dtsi diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi new file mode 100644 index 0000000..f18cec9 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -0,0 +1,449 @@ +/include/ "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + clock-frequency = <216000000>; + status = "okay"; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; -- 1.7.12 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5 3/5] ARM: tegra: Add Avionic Design Plutux support [not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> 2012-09-20 15:06 ` [PATCH v5 2/5] ARM: tegra: Add Avionic Design Tamonten support Thierry Reding @ 2012-09-20 15:06 ` Thierry Reding 2012-09-20 15:06 ` [PATCH v5 4/5] ARM: tegra: Add Avionic Design Medcom-Wide support Thierry Reding ` (2 subsequent siblings) 4 siblings, 0 replies; 6+ messages in thread From: Thierry Reding @ 2012-09-20 15:06 UTC (permalink / raw) To: Stephen Warren; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA The Plutux is a set-top box device based on the Tamonten SOM and can be connected to a display via HDMI. Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> --- Changes in v5: - remove nvidia,{ext,int}-mic-en-gpios properties Changes in v4: - based on tegra20-tamonten.dtsi - rename compatible of sound property to match device name --- arch/arm/boot/dts/tegra20-plutux.dts | 50 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 1 + 2 files changed, 51 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-plutux.dts diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts new file mode 100644 index 0000000..331a3ef --- /dev/null +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Plutux board"; + compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-plutux", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Plutux"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 6e35207..63f1d61 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -4,6 +4,7 @@ initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb -- 1.7.12 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5 4/5] ARM: tegra: Add Avionic Design Medcom-Wide support [not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> 2012-09-20 15:06 ` [PATCH v5 2/5] ARM: tegra: Add Avionic Design Tamonten support Thierry Reding 2012-09-20 15:06 ` [PATCH v5 3/5] ARM: tegra: Add Avionic Design Plutux support Thierry Reding @ 2012-09-20 15:06 ` Thierry Reding 2012-09-20 15:06 ` [PATCH v5 5/5] ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support Thierry Reding 2012-09-20 15:43 ` [PATCH v5 1/5] ARM: tegra: dts: Add pwm label Stephen Warren 4 siblings, 0 replies; 6+ messages in thread From: Thierry Reding @ 2012-09-20 15:06 UTC (permalink / raw) To: Stephen Warren; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA The Medcom is a 16:9 15" terminal that is used for patient infotainment in hospitals. Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> --- Changes in v5: - remove nvidia,{ext,int}-mic-en-gpios properties Changes in v4: - based on tegra20-tamonten.dtsi - rename compatible of sound property to match device - rename DTS file to match device name --- arch/arm/boot/dts/tegra20-medcom-wide.dts | 58 +++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 1 + 2 files changed, 59 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-medcom-wide.dts diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts new file mode 100644 index 0000000..a2d6d65 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Medcom-Wide board"; + compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-medcom-wide", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Medcom-Wide"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 63f1d61..020548a 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -3,6 +3,7 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb -- 1.7.12 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5 5/5] ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support [not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> ` (2 preceding siblings ...) 2012-09-20 15:06 ` [PATCH v5 4/5] ARM: tegra: Add Avionic Design Medcom-Wide support Thierry Reding @ 2012-09-20 15:06 ` Thierry Reding 2012-09-20 15:43 ` [PATCH v5 1/5] ARM: tegra: dts: Add pwm label Stephen Warren 4 siblings, 0 replies; 6+ messages in thread From: Thierry Reding @ 2012-09-20 15:06 UTC (permalink / raw) To: Stephen Warren; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA The Tamonten Evaluation Carrier is an evaluation board for the Tamonten SOM. More information is available here: http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.html Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> --- Changes in v5: - remove nvidia,{ext,int}-mic-en-gpios properties Changes in v4: - based on tegra20-tamonten.dtsi - rename compatible of sound property to match device --- arch/arm/boot/dts/tegra20-tec.dts | 53 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 1 + 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-tec.dts diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts new file mode 100644 index 0000000..9aff31b --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -0,0 +1,53 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Tamonten Evaluation Carrier"; + compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-tec", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design TEC"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 020548a..54c16aa 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-tec.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb -- 1.7.12 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 1/5] ARM: tegra: dts: Add pwm label [not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org> ` (3 preceding siblings ...) 2012-09-20 15:06 ` [PATCH v5 5/5] ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support Thierry Reding @ 2012-09-20 15:43 ` Stephen Warren 4 siblings, 0 replies; 6+ messages in thread From: Stephen Warren @ 2012-09-20 15:43 UTC (permalink / raw) To: Thierry Reding; +Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA On 09/20/2012 09:06 AM, Thierry Reding wrote: > PWM devices can be referenced in the DT by phandle and per-chip index. > In order for this to work properly, the PWM controller needs to have a > label attached to it. I've applied the series to Tegra's for-3.7/dt2 branch, and will send a pull request very shortly. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-09-20 15:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-20 15:06 [PATCH v5 1/5] ARM: tegra: dts: Add pwm label Thierry Reding
[not found] ` <1348153569-19083-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
2012-09-20 15:06 ` [PATCH v5 2/5] ARM: tegra: Add Avionic Design Tamonten support Thierry Reding
2012-09-20 15:06 ` [PATCH v5 3/5] ARM: tegra: Add Avionic Design Plutux support Thierry Reding
2012-09-20 15:06 ` [PATCH v5 4/5] ARM: tegra: Add Avionic Design Medcom-Wide support Thierry Reding
2012-09-20 15:06 ` [PATCH v5 5/5] ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support Thierry Reding
2012-09-20 15:43 ` [PATCH v5 1/5] ARM: tegra: dts: Add pwm label Stephen Warren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.