Re: [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller
Date: Fri, 21 Sep 2012 14:04:01 +0000	[thread overview]
Message-ID: <505C73D1.7030800@free-electrons.com> (raw)
In-Reply-To: <1348158800-23039-2-git-send-email-maxime.ripard@free-electrons.com>

Hi Florian,


Le 20/09/2012 18:33, Maxime Ripard a écrit :
> This patch adds support for the Solomon SSD1307 OLED
> controller found on the Crystalfontz CFA10036 board.
> 
> This controller can drive a display with a resolution up
> to 128x39 and can operate over I2C or SPI.
> 
> The current driver has only been tested on the CFA-10036,
> that is using this controller over I2C to driver a 96x16
> OLED screen.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Cc: Brian Lilly <brian@crystalfontz.com>

Would you consider merging this patch or review it?
It has been around for quite some time now and has not received any
comments for at least the 2 last versions, so I guess there is not much
left holding it back (unless, of course, if you have some comments to
address), and I really would like to have it in 3.7.

Thanks,

Maxime



-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

WARNING: multiple messages have this Message-ID (diff)

From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller
Date: Fri, 21 Sep 2012 16:04:01 +0200	[thread overview]
Message-ID: <505C73D1.7030800@free-electrons.com> (raw)
In-Reply-To: <1348158800-23039-2-git-send-email-maxime.ripard@free-electrons.com>

Hi Florian,


Le 20/09/2012 18:33, Maxime Ripard a ?crit :
> This patch adds support for the Solomon SSD1307 OLED
> controller found on the Crystalfontz CFA10036 board.
> 
> This controller can drive a display with a resolution up
> to 128x39 and can operate over I2C or SPI.
> 
> The current driver has only been tested on the CFA-10036,
> that is using this controller over I2C to driver a 96x16
> OLED screen.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Cc: Brian Lilly <brian@crystalfontz.com>

Would you consider merging this patch or review it?
It has been around for quite some time now and has not received any
comments for at least the 2 last versions, so I guess there is not much
left holding it back (unless, of course, if you have some comments to
address), and I really would like to have it in 3.7.

Thanks,

Maxime



-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

next prev parent reply	other threads:[~2012-09-21 14:04 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-20 16:33 [PATCHv5 0/2] Add support for the OLED in the CFA10036 Maxime Ripard
2012-09-20 16:33 ` Maxime Ripard
2012-09-20 16:33 ` [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard
2012-09-20 16:33   ` Maxime Ripard
2012-09-21 14:04   ` Maxime Ripard [this message]
2012-09-21 14:04     ` Maxime Ripard
2012-09-25 10:06     ` Maxime Ripard
2012-09-25 10:06       ` Maxime Ripard
2012-10-11  1:06       ` Florian Tobias Schandinat
2012-10-11  1:06         ` Florian Tobias Schandinat
2012-10-18 15:11         ` Maxime Ripard
2012-10-18 15:11           ` Maxime Ripard
2012-09-20 16:33 ` [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036 Maxime Ripard
2012-09-20 16:33   ` Maxime Ripard
  -- strict thread matches above, loose matches on Subject: below --
2012-10-31  9:12 [PATCHv6 0/2] Add support for the OLED in the CFA10036 Maxime Ripard
2012-10-31  9:12 ` [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard
2012-10-31  9:12   ` Maxime Ripard
2012-09-05  9:35 [PATCHv4] Add support for the OLED in the CFA10036 Maxime Ripard
2012-09-05  9:35 ` [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard
2012-09-05  9:35   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=505C73D1.7030800@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.