[Xenomai-help] Xenomai with LPC2468 ARM processor

[Xenomai-help] Xenomai with LPC2468 ARM processor

[Gigi Atanasoaie]

Hello,

I’m trying to use Xenomai with uCLinux (kernel
2.6.21), running on LPC2468 ARM processor.

I have some questions:

1. Is the Adoes ipipe implementation available for
this processor? If yes, can you, please, specify the
patch to be used?

2. Has anybody experience using it, in the
configuration above?

Regards,
 Gige



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

Re: [Xenomai-help] Xenomai with LPC2468 ARM processor

[Gilles Chanteperdrix]

On Jan 23, 2008 8:50 AM, Gigi Atanasoaie <agigi02@domain.hid> wrote:
> Hello,
>
> I'm trying to use Xenomai with uCLinux (kernel
> 2.6.21), running on LPC2468 ARM processor.
>
> I have some questions:
>
> 1. Is the Adoes ipipe implementation available for
> this processor? If yes, can you, please, specify the
> patch to be used?

We have an I-pipe patch for ARM, we tried to provide on Xenomai wiki
some information on how to port this patch on a new board :
http://www.xenomai.org/index.php/I-pipe:ArmPorting

Note that this patch is made to run on ARMs with an mmu, if you want
xenomai to run without MMU, you will probably have to add some #ifdef
CONFIG_MMU here and there.

>
> 2. Has anybody experience using it, in the
> configuration above?
>
> Regards,
>  Gige
>
>
>
>       ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
>



-- 
                                               Gilles Chanteperdrix