Re: [PATCH 3/13] drivers/media/tuners/qt1010.c: use macros for i2c_msg initialization

[Ryan Mallon <rmallon@gmail.com>]

On 08/10/12 02:38, Julia Lawall wrote:
> From: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> Introduce use of I2c_MSG_READ/WRITE/OP, for readability.
> 
> A length expressed as an explicit constant is also re-expressed as the size
> of the buffer, when this is possible.
> 
> A simplified version of the semantic patch that makes this change is as
> follows: (http://coccinelle.lip6.fr/)
> 
> // <smpl>
> @@
> expression a,b,c;
> identifier x;
> @@
> 
> struct i2c_msg x > - {.addr = a, .buf = b, .len = c, .flags = I2C_M_RD}
> + I2C_MSG_READ(a,b,c)
>  ;
> 
> @@
> expression a,b,c;
> identifier x;
> @@
> 
> struct i2c_msg x > - {.addr = a, .buf = b, .len = c, .flags = 0}
> + I2C_MSG_WRITE(a,b,c)
>  ;
> 
> @@
> expression a,b,c,d;
> identifier x;
> @@
> 
> struct i2c_msg x = 
> - {.addr = a, .buf = b, .len = c, .flags = d}
> + I2C_MSG_OP(a,b,c,d)
>  ;
> // </smpl>
> 
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> ---
>  drivers/media/tuners/qt1010.c |   10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/tuners/qt1010.c b/drivers/media/tuners/qt1010.c
> index bc419f8..37ff254 100644
> --- a/drivers/media/tuners/qt1010.c
> +++ b/drivers/media/tuners/qt1010.c
> @@ -25,10 +25,8 @@
>  static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val)
>  {
>  	struct i2c_msg msg[2] = {
> -		{ .addr = priv->cfg->i2c_address,
> -		  .flags = 0, .buf = &reg, .len = 1 },
> -		{ .addr = priv->cfg->i2c_address,
> -		  .flags = I2C_M_RD, .buf = val, .len = 1 },
> +		I2C_MSG_WRITE(priv->cfg->i2c_address, &reg, sizeof(reg)),
> +		I2C_MSG_READ(priv->cfg->i2c_address, val, 1),

This is a bit inconsistent. For single length values we should either
consistently use sizeof(val) or 1. This has both.

~Ryan