* RC6 for an Intel GU doesn't always work
@ 2012-10-10 16:33 Toralf Förster
0 siblings, 0 replies; only message in thread
From: Toralf Förster @ 2012-10-10 16:33 UTC (permalink / raw)
To: intel-gfx; +Cc: Linux Kernel, dri-devel
Sometimes - after a reboot or after wakeup from s2disk I'm observed at
my ThinkPad T420 (i5-2540M CPU) w/ integrated intel graphic (i915
module) since 3.6-rc(5?), that the temperature is above 80°C (usually it
is around/lower than 50 °C). Powertop-2.1 shows, that the all 4 CPU
cores are mostly idle, but the GPU is running at 100%. It looks for me
that the power saving mode RC6 isn't active.
After 1-2 s2ram's however the issue went away.
I'm observing the issue both under my Gentoo Linux and under a RH system
(kernel 3.6.1 each).
It is hard to bisect b/c not reliable.
--
MfG/Sincerely
Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-10-10 16:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-10 16:33 RC6 for an Intel GU doesn't always work Toralf Förster
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.