* Build failure using Master branch for Crownbay
@ 2012-10-11 15:10 Jim Abernathy
2012-10-15 20:36 ` Jim Abernathy
0 siblings, 1 reply; 3+ messages in thread
From: Jim Abernathy @ 2012-10-11 15:10 UTC (permalink / raw)
To: yocto
I just did a pull today and tried to rebuild Crownbay BSP which I
successfully built yesterday. I'm looking for a case where the rebuild
fails on a previously successful build with just running bitbake
core-image-sato without deleting any files or cleaning anything, as I've
been instructed previously.
I got such a failure today and the console log is below. I'll hold off
deleting the build directory and rebuilding as I usually do when this
happens, until I hear from the experts on how to proceed.
JIm A
Build Configuration:
BB_VERSION = "1.16.0"
TARGET_ARCH = "i586"
TARGET_OS = "linux"
MACHINE = "crownbay"
DISTRO = "poky"
DISTRO_VERSION = "1.3+snapshot-20121011"
TUNE_FEATURES = "m32 core2"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "master:df127c9cef334955e72420724fa6e1f6a6d44662"
meta-intel
meta-crownbay = "master:5d8a05811101f7d69994f4028ec620c4480f6da4"
meta-jfa = "<unknown>:<unknown>"
NOTE: Resolving any missing task queue dependencies
NOTE: preferred version 7.11 of mesa-dri not available (for item
virtual/libgl)
NOTE: versions of mesa-dri available: 2:8.0.4
2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
NOTE: preferred version 7.11 of mesa-dri not available (for item mesa-dri)
NOTE: versions of mesa-dri available: 2:8.0.4
2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
NOTE: preferred version 7.11 of mesa-dri not available (for item
mesa-dri-dev)
NOTE: versions of mesa-dri available: 2:8.0.4
2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
NOTE: preferred version 7.11 of mesa-dri not available (for item mesa-dri)
NOTE: versions of mesa-dri available: 2:8.0.4
2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_install (see
/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/temp/log.do_install.28628
for further information)
ERROR: Logfile of failure stored in:
/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/temp/log.do_install.28628
Log data follows:
| DEBUG: Executing shell function do_install
| cpio: ./usr/lib/libgstvabuffer.so.0 not created: newer or same age
version exists
| cpio: ./usr/lib/libgstvabuffer.so.0.10.8 not created: newer or same
age version exists
| 19 blocks
| cpio: ./usr/lib/libmixcommon.so.0 not created: newer or same age
version exists
| cpio: ./usr/lib/libmixcommon.so.0.10.8 not created: newer or same age
version exists
| 28 blocks
| cpio: ./usr/lib/libmixvbp.so.0 not created: newer or same age version
exists
| cpio: ./usr/lib/libmixvbp.so.0.10.8 not created: newer or same age
version exists
| cpio: ./usr/lib/libmixvbp_h264.so.0 not created: newer or same age
version exists
| cpio: ./usr/lib/libmixvbp_h264.so.0.10.8 not created: newer or same
age version exists
| cpio: ./usr/lib/libmixvbp_mpeg4.so.0 not created: newer or same age
version exists
| cpio: ./usr/lib/libmixvbp_mpeg4.so.0.10.8 not created: newer or same
age version exists
| cpio: ./usr/lib/libmixvbp_vc1.so.0 not created: newer or same age
version exists
| cpio: ./usr/lib/libmixvbp_vc1.so.0.10.8 not created: newer or same age
version exists
| 358 blocks
| cpio: ./usr/lib/libmixvideo.so.0 not created: newer or same age
version exists
| cpio: ./usr/lib/libmixvideo.so.0.10.9 not created: newer or same age
version exists
| 465 blocks
| install: omitting directory
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/dri'
| install: omitting directory
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/gstreamer-0.10'
| install: cannot stat
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libEGL.so':
No such file or directory
| install: cannot stat
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libGLES_CM.so':
No such file or directory
| install: cannot stat
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libGLESv2.so':
No such file or directory
| install: cannot stat
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libOpenVG.so':
No such file or directory
| install: cannot stat
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libOpenVGU.so':
No such file or directory
| install: omitting directory
`/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/xorg'
| ERROR: Function failed: do_install (see
/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/temp/log.do_install.28628
for further information)
ERROR: Task 3814
(/home/jim/poky/meta-intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.14.bb,
do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4452 tasks of which 2802 didn't need to
be rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed:
/home/jim/poky/meta-intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.14.bb,
do_install
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
jim@jim-ubuntu-x64:/build/crownbay-master$
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Build failure using Master branch for Crownbay
2012-10-11 15:10 Build failure using Master branch for Crownbay Jim Abernathy
@ 2012-10-15 20:36 ` Jim Abernathy
2012-10-15 20:52 ` Marc Ferland
0 siblings, 1 reply; 3+ messages in thread
From: Jim Abernathy @ 2012-10-15 20:36 UTC (permalink / raw)
To: yocto
On 10/11/2012 11:10 AM, Jim Abernathy wrote:
> I just did a pull today and tried to rebuild Crownbay BSP which I
> successfully built yesterday. I'm looking for a case where the
> rebuild fails on a previously successful build with just running
> bitbake core-image-sato without deleting any files or cleaning
> anything, as I've been instructed previously.
>
> I got such a failure today and the console log is below. I'll hold
> off deleting the build directory and rebuilding as I usually do when
> this happens, until I hear from the experts on how to proceed.
>
> JIm A
>
Since I didn't get any response, I went ahead and did "bitbake -c
cleansstate emgd-driver-bin" and then did a "bitbake core-image-sato".
The image built fine and booted fine.
Jim A
> Build Configuration:
> BB_VERSION = "1.16.0"
> TARGET_ARCH = "i586"
> TARGET_OS = "linux"
> MACHINE = "crownbay"
> DISTRO = "poky"
> DISTRO_VERSION = "1.3+snapshot-20121011"
> TUNE_FEATURES = "m32 core2"
> TARGET_FPU = ""
> meta
> meta-yocto
> meta-yocto-bsp = "master:df127c9cef334955e72420724fa6e1f6a6d44662"
> meta-intel
> meta-crownbay = "master:5d8a05811101f7d69994f4028ec620c4480f6da4"
> meta-jfa = "<unknown>:<unknown>"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: preferred version 7.11 of mesa-dri not available (for item
> virtual/libgl)
> NOTE: versions of mesa-dri available: 2:8.0.4
> 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
> NOTE: preferred version 7.11 of mesa-dri not available (for item
> mesa-dri)
> NOTE: versions of mesa-dri available: 2:8.0.4
> 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
> NOTE: preferred version 7.11 of mesa-dri not available (for item
> mesa-dri-dev)
> NOTE: versions of mesa-dri available: 2:8.0.4
> 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
> NOTE: preferred version 7.11 of mesa-dri not available (for item
> mesa-dri)
> NOTE: versions of mesa-dri available: 2:8.0.4
> 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> ERROR: Function failed: do_install (see
> /build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/temp/log.do_install.28628
> for further information)
> ERROR: Logfile of failure stored in:
> /build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/temp/log.do_install.28628
> Log data follows:
> | DEBUG: Executing shell function do_install
> | cpio: ./usr/lib/libgstvabuffer.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libgstvabuffer.so.0.10.8 not created: newer or same
> age version exists
> | 19 blocks
> | cpio: ./usr/lib/libmixcommon.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixcommon.so.0.10.8 not created: newer or same
> age version exists
> | 28 blocks
> | cpio: ./usr/lib/libmixvbp.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixvbp.so.0.10.8 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixvbp_h264.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixvbp_h264.so.0.10.8 not created: newer or same
> age version exists
> | cpio: ./usr/lib/libmixvbp_mpeg4.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixvbp_mpeg4.so.0.10.8 not created: newer or same
> age version exists
> | cpio: ./usr/lib/libmixvbp_vc1.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixvbp_vc1.so.0.10.8 not created: newer or same
> age version exists
> | 358 blocks
> | cpio: ./usr/lib/libmixvideo.so.0 not created: newer or same age
> version exists
> | cpio: ./usr/lib/libmixvideo.so.0.10.9 not created: newer or same age
> version exists
> | 465 blocks
> | install: omitting directory
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/dri'
> | install: omitting directory
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/gstreamer-0.10'
> | install: cannot stat
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libEGL.so':
> No such file or directory
> | install: cannot stat
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libGLES_CM.so':
> No such file or directory
> | install: cannot stat
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libGLESv2.so':
> No such file or directory
> | install: cannot stat
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libOpenVG.so':
> No such file or directory
> | install: cannot stat
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/libOpenVGU.so':
> No such file or directory
> | install: omitting directory
> `/build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/IEMGD_HEAD_Linux/MeeGo1.2/usr/lib/xorg'
> | ERROR: Function failed: do_install (see
> /build/crownbay-master/tmp/work/core2-poky-linux/emgd-driver-bin-1.14-r2/temp/log.do_install.28628
> for further information)
> ERROR: Task 3814
> (/home/jim/poky/meta-intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.14.bb,
> do_install) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 4452 tasks of which 2802 didn't need to
> be rerun and 1 failed.
> Waiting for 0 running tasks to finish:
>
> Summary: 1 task failed:
> /home/jim/poky/meta-intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.14.bb,
> do_install
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> jim@jim-ubuntu-x64:/build/crownbay-master$
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Build failure using Master branch for Crownbay
2012-10-15 20:36 ` Jim Abernathy
@ 2012-10-15 20:52 ` Marc Ferland
0 siblings, 0 replies; 3+ messages in thread
From: Marc Ferland @ 2012-10-15 20:52 UTC (permalink / raw)
To: yocto
Jim Abernathy <jfabernathy@gmail.com> writes:
> On 10/11/2012 11:10 AM, Jim Abernathy wrote:
>> I just did a pull today and tried to rebuild Crownbay BSP which I
>> successfully built yesterday. I'm looking for a case where the
>> rebuild fails on a previously successful build with just running
>> bitbake core-image-sato without deleting any files or cleaning
>> anything, as I've been instructed previously.
>>
>> I got such a failure today and the console log is below. I'll hold
>> off deleting the build directory and rebuilding as I usually do when
>> this happens, until I hear from the experts on how to proceed.
>>
>> JIm A
>>
> Since I didn't get any response, I went ahead and did "bitbake -c
> cleansstate emgd-driver-bin" and then did a "bitbake core-image-sato".
> The image built fine and booted fine.
>
Had the same problem today. I'm using the denzil branch.
This is probably worth opening a bug report.
Marc
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-15 20:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-11 15:10 Build failure using Master branch for Crownbay Jim Abernathy
2012-10-15 20:36 ` Jim Abernathy
2012-10-15 20:52 ` Marc Ferland
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.