[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Hervé Poussineau]

 > Signed-off-by: Gerd Hoffmann <address@hidden>

> ---
>  docs/qemupciserial.inf |  109 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 109 insertions(+), 0 deletions(-)
> create mode 100644 docs/qemupciserial.inf
[...]

Did you try to add emulation of a PCI serial card natively recognized by Windows XP (at least),
like SIIG CyberSerial card?
Available models described in msports.inf are vendorId 131F, deviceId 1000, subsystem 00000000, revision 2, or with vendorId 131F, deviceId 2000, class code 0700)

Regards,

Hervé

Re: [Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Gerd Hoffmann]

On 10/17/12 22:12, Hervé Poussineau wrote:
>> Signed-off-by: Gerd Hoffmann <address@hidden>
> 
>> ---
>>  docs/qemupciserial.inf |  109
>> ++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 109 insertions(+), 0 deletions(-)
>> create mode 100644 docs/qemupciserial.inf
> [...]
> 
> Did you try to add emulation of a PCI serial card natively recognized by
> Windows XP (at least),
> like SIIG CyberSerial card?

Thats the only one.  Looked at the linux code for it, a comment mumbled
something about a eeprom holding card configuration, /me figured I
better don't go that route.  If it would have been a simple card with
just a 16550 & nothing else I would have picked it.

cheers,
  Gerd

[Qemu-devel] [PULL v4 0/7] serial device hotplug patch series.

[Gerd Hoffmann]

  Hi,

Next round of the serial device hotplug series.  Left out chardev
patches due to confligting in-flight patches and ongoing discussions,
carrying only pci-serial and usb-serial bits.

Adressed Anthonys comments:  Added license to serial.h and moved
documentation to docs/specs/pci-serial.txt.

please pull,
  Gerd

The following changes since commit 6f4d6b09088ee161ff4be0e4db4e4c0962c79070:

  target-mips: Pass MIPSCPU to mips_vpe_sleep() (2012-10-17 01:32:11 +0200)

are available in the git repository at:
  git://git.kraxel.org/qemu serial.3

Gerd Hoffmann (7):
      serial: split serial.c
      serial: add pci variant
      serial: add windows inf file for the pci card to docs
      serial: add 2x + 4x pci variant
      serial: add pci-serial documentation
      usb-serial: don't magically zap chardev on umplug
      usb-serial: only expose device in guest when the chardev is open

 default-configs/pci.mak   |    2 +
 docs/qemupciserial.inf    |  109 +++++++++++++++++++
 docs/specs/pci-serial.txt |   34 ++++++
 hw/Makefile.objs          |    3 +-
 hw/alpha_dp264.c          |    1 +
 hw/kzm.c                  |    2 +-
 hw/mips_fulong2e.c        |    1 +
 hw/mips_jazz.c            |    1 +
 hw/mips_malta.c           |    1 +
 hw/mips_mipssim.c         |    2 +-
 hw/mips_r4k.c             |    1 +
 hw/musicpal.c             |    2 +-
 hw/omap_uart.c            |    3 +-
 hw/openrisc_sim.c         |    3 +-
 hw/pc.c                   |    1 +
 hw/pc.h                   |   27 -----
 hw/pci_ids.h              |    1 +
 hw/petalogix_ml605_mmu.c  |    2 +-
 hw/ppc/e500.c             |    2 +-
 hw/ppc405_uc.c            |    2 +-
 hw/ppc440_bamboo.c        |    2 +-
 hw/ppc_prep.c             |    1 +
 hw/pxa2xx.c               |    2 +-
 hw/serial-isa.c           |  130 +++++++++++++++++++++++
 hw/serial-pci.c           |  252 +++++++++++++++++++++++++++++++++++++++++++++
 hw/serial.c               |  149 ++-------------------------
 hw/serial.h               |   99 ++++++++++++++++++
 hw/sm501.c                |    2 +-
 hw/sun4u.c                |    1 +
 hw/usb/dev-serial.c       |   21 +++-
 hw/virtex_ml507.c         |    2 +-
 hw/xtensa_lx60.c          |    3 +-
 32 files changed, 681 insertions(+), 183 deletions(-)
 create mode 100644 docs/qemupciserial.inf
 create mode 100644 docs/specs/pci-serial.txt
 create mode 100644 hw/serial-isa.c
 create mode 100644 hw/serial-pci.c
 create mode 100644 hw/serial.h

[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Gerd Hoffmann]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 docs/qemupciserial.inf |  109 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 109 insertions(+), 0 deletions(-)
 create mode 100644 docs/qemupciserial.inf

diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf
new file mode 100644
index 0000000..3474310
--- /dev/null
+++ b/docs/qemupciserial.inf
@@ -0,0 +1,109 @@
+; qemupciserial.inf for QEMU, based on MSPORTS.INF
+
+; The driver itself is shipped with Windows (serial.sys).  This is
+; just a inf file to tell windows which pci id the serial pci card
+; emulated by qemu has, and to apply a name tag to it which windows
+; will show in the device manager.
+
+; Installing the driver: Go to device manager.  You should find a "pci
+; serial card" tagged with a yellow question mark.  Open properties.
+; Pick "update driver".  Then "select driver manually".  Pick "Ports
+; (Com+Lpt)" from the list.  Click "Have a disk".  Select this file.
+; Procedure may vary a bit depending on the windows version.
+
+; FIXME: This file covers the single port version only.
+
+[Version]
+Signature="$CHICAGO$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%QEMU%
+DriverVer=09/24/2012,1.3.0
+
+[SourceDisksNames]
+3426=windows cd
+
+[SourceDisksFiles]
+serial.sys 		= 3426
+serenum.sys 		= 3426
+
+[DestinationDirs]
+DefaultDestDir  = 11        ;LDID_SYS
+ComPort.NT.Copy = 12        ;DIRID_DRIVERS
+SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
+
+; Drivers
+;----------------------------------------------------------
+[Manufacturer]
+%QEMU%=QEMU,NTx86
+
+[QEMU.NTx86]
+%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700"
+
+; COM sections
+;----------------------------------------------------------
+[ComPort.AddReg]
+HKR,,PortSubClass,1,01
+
+[ComPort.NT]
+AddReg=ComPort.AddReg, ComPort.NT.AddReg
+LogConfig=caa
+SyssetupPnPFlags = 1
+
+[ComPort.NT.HW]
+AddReg=ComPort.NT.HW.AddReg
+
+[ComPort.NT.AddReg]
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[ComPort.NT.HW.AddReg]
+HKR,,"UpperFilters",0x00010000,"serenum"
+
+;-------------- Service installation
+; Port Driver (function driver for this device)
+[ComPort.NT.Services]
+AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
+AddService = Serenum,,Serenum_Service_Inst
+
+; -------------- Serial Port Driver install sections
+[Serial_Service_Inst]
+DisplayName    = %Serial.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
+ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
+ServiceBinary  = %12%\serial.sys
+LoadOrderGroup = Extended base
+
+; -------------- Serenum Driver install section
+[Serenum_Service_Inst]
+DisplayName    = %Serenum.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 3               ; SERVICE_DEMAND_START
+ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
+ServiceBinary  = %12%\serenum.sys
+LoadOrderGroup = PNP Filter
+
+[Serial_EventLog_Inst]
+AddReg = Serial_EventLog_AddReg
+
+[Serial_EventLog_AddReg]
+HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
+HKR,,TypesSupported,0x00010001,7
+
+; The following sections are COM port resource configs.
+; Section name format means:
+; Char 1 = c (COM port)
+; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
+; Char 3 = IRQ config: #, a (any)
+
+[caa]                   ; Any base, any IRQ
+ConfigPriority=HARDRECONFIG
+IOConfig=8@100-ffff%fff8(3ff::)
+IRQConfig=S:3,4,5,7,9,10,11,12,14,15
+
+[Strings]
+QEMU="QEMU"
+QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card"
+
+Serial.SVCDESC   = "Serial port driver"
+Serenum.SVCDESC = "Serenum Filter Driver"
-- 
1.7.1

[Qemu-devel] [PULL 0/7] serial device hotplug patch series.

[Gerd Hoffmann]

  Hi,

This patch series tackles serial device hotplug.

The first four patches have been on the list before, they implement
pci-serial devices featuring a hot-pluggable 16550 uart and got some
minor tweaks only.

The next two patches update the usb-serial device.  It will only show up
in the guest when the chardev is open.  You'll see the difference with
socket chardevs:  If you open the chardev (by connecting to the socket)
the device will show up in the guest, on close (disconnect) it will
disappear.

Final patch adds chardev hotplug to the mix, which makes the other
patches alot more useful.  It is the missing bit needed to really
hotplug serial devices:

   (qemu) chardev_add pciserial file /root/hotchardev.log
   (qemu) device_add pci-serial,chardev=pciserial,id=pciserial

And the reverse:

   (qemu) device_del pciserial
   (qemu) chardev_del pciserial

please review & pull,
  Gerd

The following changes since commit b4ae3cfa57b8c1bdbbd7b7d420971e9171203ade:

  ssi: Add slave autoconnect helper (2012-10-10 11:13:32 +1000)

are available in the git repository at:
  git://git.kraxel.org/qemu serial.1

Gerd Hoffmann (7):
      serial: split serial.c
      serial: add pci variant
      serial: add windows inf file for the pci card to docs
      serial: add 2x + 4x pci variant
      usb-serial: don't magically zap chardev on umplug
      usb-serial: only expose device in guest when the chardev is open
      chardev: add hotplug support.

 default-configs/pci.mak  |    2 +
 docs/qemupciserial.inf   |  109 ++++++++++++++++++
 hmp-commands.hx          |   49 ++++++++
 hmp.c                    |   39 +++++++
 hmp.h                    |    2 +
 hw/Makefile.objs         |    3 +-
 hw/alpha_dp264.c         |    1 +
 hw/kzm.c                 |    2 +-
 hw/mips_fulong2e.c       |    1 +
 hw/mips_jazz.c           |    1 +
 hw/mips_malta.c          |    1 +
 hw/mips_mipssim.c        |    2 +-
 hw/mips_r4k.c            |    1 +
 hw/musicpal.c            |    2 +-
 hw/omap_uart.c           |    3 +-
 hw/openrisc_sim.c        |    3 +-
 hw/pc.c                  |    1 +
 hw/pc.h                  |   27 -----
 hw/pci_ids.h             |    1 +
 hw/petalogix_ml605_mmu.c |    2 +-
 hw/ppc/e500.c            |    2 +-
 hw/ppc405_uc.c           |    2 +-
 hw/ppc440_bamboo.c       |    2 +-
 hw/ppc_prep.c            |    1 +
 hw/pxa2xx.c              |    2 +-
 hw/serial-isa.c          |  130 ++++++++++++++++++++++
 hw/serial-pci.c          |  272 ++++++++++++++++++++++++++++++++++++++++++++++
 hw/serial.c              |  149 ++-----------------------
 hw/serial.h              |   74 +++++++++++++
 hw/sm501.c               |    2 +-
 hw/sun4u.c               |    1 +
 hw/usb/dev-serial.c      |   21 +++-
 hw/virtex_ml507.c        |    2 +-
 hw/xtensa_lx60.c         |    3 +-
 qapi-schema.json         |   46 ++++++++
 qemu-char.c              |   74 +++++++++++++
 qmp-commands.hx          |   61 ++++++++++
 37 files changed, 913 insertions(+), 183 deletions(-)
 create mode 100644 docs/qemupciserial.inf
 create mode 100644 hw/serial-isa.c
 create mode 100644 hw/serial-pci.c
 create mode 100644 hw/serial.h

[Qemu-devel] [PATCH 3/7] serial: add windows inf file for the pci card to docs

[Gerd Hoffmann]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 docs/qemupciserial.inf |  107 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 107 insertions(+), 0 deletions(-)
 create mode 100644 docs/qemupciserial.inf

diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf
new file mode 100644
index 0000000..c7cea99
--- /dev/null
+++ b/docs/qemupciserial.inf
@@ -0,0 +1,107 @@
+; qemupciserial.inf for QEMU, based on MSPORTS.INF
+
+; The driver itself is shipped with Windows (serial.sys).  This is
+; just a inf file to tell windows which pci id the serial pci card
+; emulated by qemu has, and to apply a name tag to it which windows
+; will show in the device manager.
+
+; Installing the driver: Go to device manager.  You should find a "pci
+; serial card" tagged with a yellow question mark.  Open properties.
+; Pick "update driver".  Then "select driver manually".  Pick "Ports
+; (Com+Lpt)" from the list.  Click "Have a disk".  Select this file.
+; Procedure may vary a bit depending on the windows version.
+
+[Version]
+Signature="$CHICAGO$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%QEMU%
+DriverVer=09/24/2012,1.3.0
+
+[SourceDisksNames]
+3426=windows cd
+
+[SourceDisksFiles]
+serial.sys 		= 3426
+serenum.sys 		= 3426
+
+[DestinationDirs]
+DefaultDestDir  = 11        ;LDID_SYS
+ComPort.NT.Copy = 12        ;DIRID_DRIVERS
+SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
+
+; Drivers
+;----------------------------------------------------------
+[Manufacturer]
+%QEMU%=QEMU,NTx86
+
+[QEMU.NTx86]
+%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700"
+
+; COM sections
+;----------------------------------------------------------
+[ComPort.AddReg]
+HKR,,PortSubClass,1,01
+
+[ComPort.NT]
+AddReg=ComPort.AddReg, ComPort.NT.AddReg
+LogConfig=caa
+SyssetupPnPFlags = 1
+
+[ComPort.NT.HW]
+AddReg=ComPort.NT.HW.AddReg
+
+[ComPort.NT.AddReg]
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[ComPort.NT.HW.AddReg]
+HKR,,"UpperFilters",0x00010000,"serenum"
+
+;-------------- Service installation
+; Port Driver (function driver for this device)
+[ComPort.NT.Services]
+AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
+AddService = Serenum,,Serenum_Service_Inst
+
+; -------------- Serial Port Driver install sections
+[Serial_Service_Inst]
+DisplayName    = %Serial.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
+ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
+ServiceBinary  = %12%\serial.sys
+LoadOrderGroup = Extended base
+
+; -------------- Serenum Driver install section
+[Serenum_Service_Inst]
+DisplayName    = %Serenum.SVCDESC%
+ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
+StartType      = 3               ; SERVICE_DEMAND_START
+ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
+ServiceBinary  = %12%\serenum.sys
+LoadOrderGroup = PNP Filter
+
+[Serial_EventLog_Inst]
+AddReg = Serial_EventLog_AddReg
+
+[Serial_EventLog_AddReg]
+HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
+HKR,,TypesSupported,0x00010001,7
+
+; The following sections are COM port resource configs.
+; Section name format means:
+; Char 1 = c (COM port)
+; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
+; Char 3 = IRQ config: #, a (any)
+
+[caa]                   ; Any base, any IRQ
+ConfigPriority=HARDRECONFIG
+IOConfig=8@100-ffff%fff8(3ff::)
+IRQConfig=S:3,4,5,7,9,10,11,12,14,15
+
+[Strings]
+QEMU="QEMU"
+QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card"
+
+Serial.SVCDESC   = "Serial port driver"
+Serenum.SVCDESC = "Serenum Filter Driver"
-- 
1.7.1