All of lore.kernel.org
 help / color / mirror / Atom feed
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V6 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl
Date: Tue, 23 Oct 2012 11:43:02 +0200	[thread overview]
Message-ID: <508666A6.9040701@free-electrons.com> (raw)
In-Reply-To: <20121023090154.GP21164@n2100.arm.linux.org.uk>

On 10/23/2012 11:01 AM, Russell King - ARM Linux wrote:
> On Thu, Sep 27, 2012 at 11:35:23AM +0200, Gregory CLEMENT wrote:
>> Aurora Cache Controller was designed to be compatible with the ARM L2
>> Cache Controller. It comes with some difference or improvement such
>> as:
>> - no cache id part number available through hardware (need to get it
>>   by the DT).
>> - always write through mode available.
>> - two flavors of the controller outer cache and system cache (meaning
>>   maintenance operations on L1 are broadcasted to the L2 and L2
>>   performs the same operation).
>> - in outer cache mode, the cache maintenance operations are improved and
>>   can be done on a range inside a page and are not limited to a cache
>>   line.
> 
> This adds new build warnings:
> 
> arch/arm/mm/cache-l2x0.c:328:13: warning: 'aurora_inv_range' defined but not used
> arch/arm/mm/cache-l2x0.c:347:13: warning: 'aurora_clean_range' defined but not used
> arch/arm/mm/cache-l2x0.c:365:13: warning: 'aurora_flush_range' defined but not used
> 
> to the realview build (non-DT).  Please investigate, thanks.

OK I found the problem: aurora cache support is new so it is only
enable with device tree support. I moved all this functions in the
under OF_CONFIG (see the patch below). Do you want I submit it on the
patch system, or can you get it directly from this email?

Regards,

Gregory

---
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 5f2c7b4..3b2c40b 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -102,6 +102,10 @@

 #define L2X0_ADDR_FILTER_EN		1

+#define L2X0_CTRL_EN			1
+
+#define L2X0_WAY_SIZE_SHIFT		3
+
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask);
 #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
diff --git a/arch/arm/mm/cache-aurora-l2.h b/arch/arm/mm/cache-aurora-l2.h
new file mode 100644
index 0000000..c861247
--- /dev/null
+++ b/arch/arm/mm/cache-aurora-l2.h
@@ -0,0 +1,55 @@
+/*
+ * AURORA shared L2 cache controller support
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H
+#define __ASM_ARM_HARDWARE_AURORA_L2_H
+
+#define AURORA_SYNC_REG		    0x700
+#define AURORA_RANGE_BASE_ADDR_REG  0x720
+#define AURORA_FLUSH_PHY_ADDR_REG   0x7f0
+#define AURORA_INVAL_RANGE_REG	    0x774
+#define AURORA_CLEAN_RANGE_REG	    0x7b4
+#define AURORA_FLUSH_RANGE_REG	    0x7f4
+
+#define AURORA_ACR_REPLACEMENT_OFFSET	    27
+#define AURORA_ACR_REPLACEMENT_MASK	     \
+	(0x3 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR    \
+	(0 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_LFSR     \
+	(1 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \
+	(3 << AURORA_ACR_REPLACEMENT_OFFSET)
+
+#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET	0
+#define AURORA_ACR_FORCE_WRITE_POLICY_MASK	\
+	(0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_POLICY_DIS	\
+	(0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_BACK_POLICY	\
+	(1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_THRO_POLICY	\
+	(2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+
+#define MAX_RANGE_SIZE		1024
+
+#define AURORA_WAY_SIZE_SHIFT	2
+
+#define AURORA_CTRL_FW		0x100
+
+/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make
+ * the distinction between a number coming from hardware and a number
+ * coming from the device tree */
+#define AURORA_CACHE_ID	       0x100
+
+#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 5e82433..1bc1920 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -25,6 +25,7 @@

 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
+#include "cache-aurora-l2.h"

 #define CACHE_LINE_SIZE		32

@@ -33,6 +34,11 @@ static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
 static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
+static int l2_wt_override;
+
+/* Aurora don't have the cache ID register available, so we have to
+ * pass it though the device tree */
+static u32  cache_id_part_number_from_dt;

 struct l2x0_regs l2x0_saved_regs;

@@ -169,7 +175,7 @@ static void l2x0_inv_all(void)
 	/* invalidate all ways */
 	raw_spin_lock_irqsave(&l2x0_lock, flags);
 	/* Invalidating when L2 is enabled is a nono */
-	BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1);
+	BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN);
 	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
@@ -293,11 +299,18 @@ static void l2x0_unlock(u32 cache_id)
 	int lockregs;
 	int i;

-	if (cache_id == L2X0_CACHE_ID_PART_L310)
+	switch (cache_id) {
+	case L2X0_CACHE_ID_PART_L310:
 		lockregs = 8;
-	else
+		break;
+	case AURORA_CACHE_ID:
+		lockregs = 4;
+		break;
+	default:
 		/* L210 and unknown types */
 		lockregs = 1;
+		break;
+	}

 	for (i = 0; i < lockregs; i++) {
 		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
@@ -313,18 +326,22 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	u32 cache_id;
 	u32 way_size = 0;
 	int ways;
+	int way_size_shift = L2X0_WAY_SIZE_SHIFT;
 	const char *type;

 	l2x0_base = base;
-
-	cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+	if (cache_id_part_number_from_dt)
+		cache_id = cache_id_part_number_from_dt;
+	else
+		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
+			& L2X0_CACHE_ID_PART_MASK;
 	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);

 	aux &= aux_mask;
 	aux |= aux_val;

 	/* Determine the number of ways */
-	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+	switch (cache_id) {
 	case L2X0_CACHE_ID_PART_L310:
 		if (aux & (1 << 16))
 			ways = 16;
@@ -341,6 +358,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		ways = (aux >> 13) & 0xf;
 		type = "L210";
 		break;
+
+	case AURORA_CACHE_ID:
+		sync_reg_offset = AURORA_SYNC_REG;
+		ways = (aux >> 13) & 0xf;
+		ways = 2 << ((ways + 1) >> 2);
+		way_size_shift = AURORA_WAY_SIZE_SHIFT;
+		type = "Aurora";
+		break;
 	default:
 		/* Assume unknown chips have 8 ways */
 		ways = 8;
@@ -354,7 +379,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	 * L2 cache Size =  Way size * Number of ways
 	 */
 	way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
-	way_size = 1 << (way_size + 3);
+	way_size = 1 << (way_size + way_size_shift);
+
 	l2x0_size = ways * way_size * SZ_1K;

 	/*
@@ -362,7 +388,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
 	 */
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		/* Make sure that I&D is not locked down when starting */
 		l2x0_unlock(cache_id);

@@ -372,7 +398,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		l2x0_inv_all();

 		/* enable L2X0 */
-		writel_relaxed(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
 	}

 	/* Re-read it in case some bits are reserved. */
@@ -397,6 +423,98 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 }

 #ifdef CONFIG_OF
+/*
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive, while the hardware cache range operations use
+ * inclusive start and end addresses.
+ */
+static unsigned long calc_range_end(unsigned long start, unsigned long end)
+{
+	/*
+	 * Limit the number of cache lines processed@once,
+	 * since cache range operations stall the CPU pipeline
+	 * until completion.
+	 */
+	if (end > start + MAX_RANGE_SIZE)
+		end = start + MAX_RANGE_SIZE;
+
+	/*
+	 * Cache range operations can't straddle a page boundary.
+	 */
+	if (end > PAGE_ALIGN(start+1))
+		end = PAGE_ALIGN(start+1);
+
+	return end;
+}
+
+/*
+ * Make sure 'start' and 'end' reference the same page, as L2 is PIPT
+ * and range operations only do a TLB lookup on the start address.
+ */
+static void aurora_pa_range(unsigned long start, unsigned long end,
+			unsigned long offset)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&l2x0_lock, flags);
+	writel(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG);
+	writel(end, l2x0_base + offset);
+	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+
+	cache_sync();
+}
+
+static void aurora_inv_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * round start and end adresses up to cache line size
+	 */
+	start &= ~(CACHE_LINE_SIZE - 1);
+	end = ALIGN(end, CACHE_LINE_SIZE);
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start < end) {
+		unsigned long range_end = calc_range_end(start, end);
+		aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
+				AURORA_INVAL_RANGE_REG);
+		start = range_end;
+	}
+}
+
+static void aurora_clean_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * If L2 is forced to WT, the L2 will always be clean and we
+	 * don't need to do anything here.
+	 */
+	if (!l2_wt_override) {
+		start &= ~(CACHE_LINE_SIZE - 1);
+		end = ALIGN(end, CACHE_LINE_SIZE);
+		while (start != end) {
+			unsigned long range_end = calc_range_end(start, end);
+			aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
+					AURORA_CLEAN_RANGE_REG);
+			start = range_end;
+		}
+	}
+}
+
+static void aurora_flush_range(unsigned long start, unsigned long end)
+{
+	if (!l2_wt_override) {
+		start &= ~(CACHE_LINE_SIZE - 1);
+		end = ALIGN(end, CACHE_LINE_SIZE);
+		while (start != end) {
+			unsigned long range_end = calc_range_end(start, end);
+			aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
+					AURORA_FLUSH_RANGE_REG);
+			start = range_end;
+		}
+	}
+}
+
 static void __init l2x0_of_setup(const struct device_node *np,
 				 u32 *aux_val, u32 *aux_mask)
 {
@@ -494,9 +612,15 @@ static void __init pl310_save(void)
 	}
 }

+static void aurora_save(void)
+{
+	l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL);
+	l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+}
+
 static void l2x0_resume(void)
 {
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		/* restore aux ctrl and enable l2 */
 		l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));

@@ -505,7 +629,7 @@ static void l2x0_resume(void)

 		l2x0_inv_all();

-		writel_relaxed(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
 	}
 }

@@ -513,7 +637,7 @@ static void pl310_resume(void)
 {
 	u32 l2x0_revision;

-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		/* restore pl310 setup */
 		writel_relaxed(l2x0_saved_regs.tag_latency,
 			l2x0_base + L2X0_TAG_LATENCY_CTRL);
@@ -539,6 +663,46 @@ static void pl310_resume(void)
 	l2x0_resume();
 }

+static void aurora_resume(void)
+{
+	if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+		writel(l2x0_saved_regs.aux_ctrl, l2x0_base + L2X0_AUX_CTRL);
+		writel(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL);
+	}
+}
+
+static void __init aurora_broadcast_l2_commands(void)
+{
+	__u32 u;
+	/* Enable Broadcasting of cache commands to L2*/
+	__asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u));
+	u |= AURORA_CTRL_FW;		/* Set the FW bit */
+	__asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u));
+	isb();
+}
+
+static void __init aurora_of_setup(const struct device_node *np,
+				u32 *aux_val, u32 *aux_mask)
+{
+	u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
+	u32 mask =  AURORA_ACR_REPLACEMENT_MASK;
+
+	of_property_read_u32(np, "cache-id-part",
+			&cache_id_part_number_from_dt);
+
+	/* Determine and save the write policy */
+	l2_wt_override = of_property_read_bool(np, "wt-override");
+
+	if (l2_wt_override) {
+		val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
+		mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
+	}
+
+	*aux_val &= ~mask;
+	*aux_val |= val;
+	*aux_mask &= ~mask;
+}
+
 static const struct l2x0_of_data pl310_data = {
 	.setup = pl310_of_setup,
 	.save  = pl310_save,
@@ -570,10 +734,37 @@ static const struct l2x0_of_data l2x0_data = {
 	},
 };

+static const struct l2x0_of_data aurora_with_outer_data = {
+	.setup = aurora_of_setup,
+	.save  = aurora_save,
+	.outer_cache = {
+		.resume      = aurora_resume,
+		.inv_range   = aurora_inv_range,
+		.clean_range = aurora_clean_range,
+		.flush_range = aurora_flush_range,
+		.sync        = l2x0_cache_sync,
+		.flush_all   = l2x0_flush_all,
+		.inv_all     = l2x0_inv_all,
+		.disable     = l2x0_disable,
+	},
+};
+
+static const struct l2x0_of_data aurora_no_outer_data = {
+	.setup = aurora_of_setup,
+	.save  = aurora_save,
+	.outer_cache = {
+		.resume      = aurora_resume,
+	},
+};
+
 static const struct of_device_id l2x0_ids[] __initconst = {
 	{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
 	{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
 	{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
+	{ .compatible = "marvell,aurora-system-cache",
+	  .data = (void *)&aurora_no_outer_data},
+	{ .compatible = "marvell,aurora-outer-cache",
+	  .data = (void *)&aurora_with_outer_data},
 	{}
 };

@@ -599,9 +790,14 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	data = of_match_node(l2x0_ids, np)->data;

 	/* L2 configuration can only be changed if the cache is disabled */
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		if (data->setup)
 			data->setup(np, &aux_val, &aux_mask);
+
+		/* For aurora cache in no outer mode select the
+		 * correct mode using the coprocessor*/
+		if (data == &aurora_no_outer_data)
+			aurora_broadcast_l2_commands();
 	}

 	if (data->save)
-- 
1.7.9.5

  reply	other threads:[~2012-10-23  9:43 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-26 16:02 [PATCH V5] Add support for Aurora L2 Cache Controller Gregory CLEMENT
2012-09-26 16:02 ` [PATCH V5 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data Gregory CLEMENT
2012-09-26 16:14   ` Jason Cooper
2012-09-26 16:33     ` Gregory CLEMENT
2012-09-26 16:02 ` [PATCH V5 2/6] arm: cache-l2x0: add an optional register to save/restore Gregory CLEMENT
2012-09-26 16:02 ` [PATCH V5 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl Gregory CLEMENT
2012-09-26 17:11   ` Catalin Marinas
2012-09-27  9:35     ` Gregory CLEMENT
2012-09-27  9:35       ` [PATCH V6 " Gregory CLEMENT
2012-10-23  9:01         ` Russell King - ARM Linux
2012-10-23  9:43           ` Gregory CLEMENT [this message]
2012-10-23 10:00             ` Russell King - ARM Linux
2012-10-23 10:23               ` Gregory CLEMENT
2012-11-04 22:32                 ` Russell King - ARM Linux
2012-11-05 23:50                   ` Gregory CLEMENT
2012-11-06  0:24                     ` Russell King - ARM Linux
2012-11-06  0:59                       ` Gregory CLEMENT
2012-11-08 14:08             ` Arnd Bergmann
2012-11-08 14:21               ` Russell King - ARM Linux
2012-11-08 14:42                 ` Arnd Bergmann
2012-09-26 16:02 ` [PATCH V5 4/6] arm: mvebu: add L2 cache support Gregory CLEMENT
2012-09-29 23:20   ` Olof Johansson
2012-09-26 16:02 ` [PATCH V5 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT Gregory CLEMENT
2012-09-26 16:02 ` [PATCH V5 6/6] arm: l2x0: add aurora related properties to OF binding Gregory CLEMENT
2012-09-26 16:08 ` [PATCH V5] Add support for Aurora L2 Cache Controller Gregory CLEMENT
2012-09-26 16:24   ` Jason Cooper
2012-09-26 16:40     ` Gregory CLEMENT
2012-09-26 18:48       ` Jason Cooper
2012-09-27  7:31         ` Gregory CLEMENT
2012-09-30 23:55 ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=508666A6.9040701@free-electrons.com \
    --to=gregory.clement@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.