Re: [PATCH v2 2/7] i2c: omap: reorder exit path of omap_i2c_xfer_msg()

[Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org>]

On Thursday 25 October 2012 05:55 PM, Felipe Balbi wrote:
> just a cleanup patch trying to make exit path
> more straightforward. No changes otherwise.
>
> Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> ---
>   drivers/i2c/busses/i2c-omap.c | 26 +++++++++++++++++---------
>   1 file changed, 17 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index c07d9c4..bea0277 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -505,6 +505,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
>   {
>   	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
>   	unsigned long timeout;
> +	int ret;
You might want to initialize the error value to avoid return 0. Compiler
might be already cribbing for it

>   	u16 w;
>
>   	dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
> @@ -582,31 +583,38 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
>   	dev->buf_len = 0;
>   	if (timeout == 0) {
>   		dev_err(dev->dev, "controller timed out\n");
> -		omap_i2c_init(dev);
> -		return -ETIMEDOUT;
> +		ret = -ETIMEDOUT;
> +		goto err_i2c_init;
>   	}
>
> -	if (likely(!dev->cmd_err))
> -		return 0;
> -
Have you have drooped this check completely ?

>   	/* We have an error */
>   	if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
>   			    OMAP_I2C_STAT_XUDF)) {
> -		omap_i2c_init(dev);
> -		return -EIO;
> +		ret = -EIO;
> +		goto err_i2c_init;
>   	}
>
>   	if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
>   		if (msg->flags & I2C_M_IGNORE_NAK)
>   			return 0;
> +
>   		if (stop) {
>   			w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
>   			w |= OMAP_I2C_CON_STP;
>   			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
>   		}
> -		return -EREMOTEIO;
> +
> +		ret = -EREMOTEIO;
> +		goto err;
>   	}
> -	return -EIO;
> +
> +	return 0;
With initialized value you can use
return ret;

Regards
Santosh