From: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
To: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
device-mapper development <dm-devel@redhat.com>,
Tejun Heo <tj@kernel.org>, Jens Axboe <axboe@kernel.dk>,
Alasdair G Kergon <agk@redhat.com>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: [PATCH] blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
Date: Tue, 30 Oct 2012 11:25:47 +0900 [thread overview]
Message-ID: <508F3AAB.6060204@ce.jp.nec.com> (raw)
In-Reply-To: <20121029171346.GC3308@redhat.com>
On 10/30/12 02:13, Vivek Goyal wrote:
> On Mon, Oct 29, 2012 at 05:45:15PM +0100, Peter Zijlstra wrote:
>> int radix_tree_preload(gfp_t gfp_mask)
>> {
>> struct radix_tree_preload *rtp;
>> struct radix_tree_node *node;
>> int ret = -ENOMEM;
>>
>> preempt_disable();
>>
>>
>> Seems obvious why it explodes..
>
> Oh right. Thanks Peter. So just calling blk_queue_bypass_start() before
> radix_tree_preload() should fix it. Junichi, can you please give it
> a try.
Thank you! It just works.
This is a revised patch.
With 749fefe677 ("block: lift the initial queue bypass mode on
blk_register_queue() instead of blk_init_allocated_queue()"),
the following warning appears when multipath is used with
CONFIG_PREEMPT=y.
This patch moves blk_queue_bypass_start() before radix_tree_preload()
to avoid the sleeping call while preemption is disabled.
BUG: scheduling while atomic: multipath/2460/0x00000002
1 lock held by multipath/2460:
#0: (&md->type_lock){......}, at: [<ffffffffa019fb05>] dm_lock_md_type+0x17/0x19 [dm_mod]
Modules linked in: ...
Pid: 2460, comm: multipath Tainted: G W 3.7.0-rc2 #1
Call Trace:
[<ffffffff810723ae>] __schedule_bug+0x6a/0x78
[<ffffffff81428ba2>] __schedule+0xb4/0x5e0
[<ffffffff814291e6>] schedule+0x64/0x66
[<ffffffff8142773a>] schedule_timeout+0x39/0xf8
[<ffffffff8108ad5f>] ? put_lock_stats+0xe/0x29
[<ffffffff8108ae30>] ? lock_release_holdtime+0xb6/0xbb
[<ffffffff814289e3>] wait_for_common+0x9d/0xee
[<ffffffff8107526c>] ? try_to_wake_up+0x206/0x206
[<ffffffff810c0eb8>] ? kfree_call_rcu+0x1c/0x1c
[<ffffffff81428aec>] wait_for_completion+0x1d/0x1f
[<ffffffff810611f9>] wait_rcu_gp+0x5d/0x7a
[<ffffffff81061216>] ? wait_rcu_gp+0x7a/0x7a
[<ffffffff8106fb18>] ? complete+0x21/0x53
[<ffffffff810c0556>] synchronize_rcu+0x1e/0x20
[<ffffffff811dd903>] blk_queue_bypass_start+0x5d/0x62
[<ffffffff811ee109>] blkcg_activate_policy+0x73/0x270
[<ffffffff81130521>] ? kmem_cache_alloc_node_trace+0xc7/0x108
[<ffffffff811f04b3>] cfq_init_queue+0x80/0x28e
[<ffffffffa01a1600>] ? dm_blk_ioctl+0xa7/0xa7 [dm_mod]
[<ffffffff811d8c41>] elevator_init+0xe1/0x115
[<ffffffff811e229f>] ? blk_queue_make_request+0x54/0x59
[<ffffffff811dd743>] blk_init_allocated_queue+0x8c/0x9e
[<ffffffffa019ffcd>] dm_setup_md_queue+0x36/0xaa [dm_mod]
[<ffffffffa01a60e6>] table_load+0x1bd/0x2c8 [dm_mod]
[<ffffffffa01a7026>] ctl_ioctl+0x1d6/0x236 [dm_mod]
[<ffffffffa01a5f29>] ? table_clear+0xaa/0xaa [dm_mod]
[<ffffffffa01a7099>] dm_ctl_ioctl+0x13/0x17 [dm_mod]
[<ffffffff811479fc>] do_vfs_ioctl+0x3fb/0x441
[<ffffffff811b643c>] ? file_has_perm+0x8a/0x99
[<ffffffff81147aa0>] sys_ioctl+0x5e/0x82
[<ffffffff812010be>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff814310d9>] system_call_fastpath+0x16/0x1b
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alasdair G Kergon <agk@redhat.com>
---
block/blk-cgroup.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index d0b7703..954f4be 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -791,10 +791,10 @@ int blkcg_activate_policy(struct request_queue *q,
if (!blkg)
return -ENOMEM;
- preloaded = !radix_tree_preload(GFP_KERNEL);
-
blk_queue_bypass_start(q);
+ preloaded = !radix_tree_preload(GFP_KERNEL);
+
/* make sure the root blkg exists and count the existing blkgs */
spin_lock_irq(q->queue_lock);
next prev parent reply other threads:[~2012-10-30 2:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-25 9:41 [PATCH 2/2] dm: stay in blk_queue_bypass until queue becomes initialized Jun'ichi Nomura
2012-10-26 1:42 ` Jun'ichi Nomura
2012-10-26 20:21 ` Vivek Goyal
2012-10-29 10:15 ` Jun'ichi Nomura
2012-10-29 16:38 ` Vivek Goyal
2012-10-29 16:45 ` Peter Zijlstra
2012-10-29 17:13 ` Vivek Goyal
2012-10-30 2:25 ` Jun'ichi Nomura [this message]
2012-10-30 13:21 ` [PATCH] blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Vivek Goyal
2013-01-08 7:31 ` [PATCH repost] " Jun'ichi Nomura
2013-01-09 15:52 ` Vivek Goyal
2013-01-09 15:55 ` Tejun Heo
2013-02-26 4:53 ` Jun'ichi Nomura
2013-02-26 4:53 ` Jun'ichi Nomura
2012-10-29 16:55 ` [PATCH 2/2] dm: stay in blk_queue_bypass until queue becomes initialized Paul E. McKenney
-- strict thread matches above, loose matches on Subject: below --
2012-10-30 6:32 [PATCH] blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Staci Page
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=508F3AAB.6060204@ce.jp.nec.com \
--to=j-nomura@ce.jp.nec.com \
--cc=agk@redhat.com \
--cc=axboe@kernel.dk \
--cc=dm-devel@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=tj@kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.