From: Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
To: Pantelis Antoniou
<panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
Cc: Jonathan Cameron <jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org>,
"Patil, Rachna" <rachna-l0cyMroinI0@public.gmane.org>,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Koen Kooi
<koen-QLwJDigV5abLmq1fohREcCpxlwaOVQ5f@public.gmane.org>,
Matt Porter <mporter-l0cyMroinI0@public.gmane.org>,
Russ Dill <Russ.Dill-l0cyMroinI0@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ti_tscadc: Match mfd sub devices to regmap interface
Date: Tue, 30 Oct 2012 19:21:37 +0100 [thread overview]
Message-ID: <50901AB1.6040005@metafoo.de> (raw)
In-Reply-To: <1351698945-3881-1-git-send-email-panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
On 10/31/2012 04:55 PM, Pantelis Antoniou wrote:
> The MFD parent device now uses a regmap, instead of direct
> memory access. Use the same method in the sub devices to avoid
> nasty surprises.
>
> Also rework the channel initialization of tiadc a bit.
Those two bits are not even closely related, they should really go into
separate patches.
>
> Signed-off-by: Pantelis Antoniou <panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
> ---
> drivers/iio/adc/ti_am335x_adc.c | 27 +++++++++++++++++++--------
> drivers/input/touchscreen/ti_am335x_tsc.c | 16 +++++++++++++---
> drivers/mfd/ti_am335x_tscadc.c | 7 +++++--
> 3 files changed, 37 insertions(+), 13 deletions(-)
>
[...]
>
> @@ -213,6 +222,8 @@ static int __devinit tiadc_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, indio_dev);
>
> + dev_info(&pdev->dev, "Initialized\n");
That's just noise, please don't add it. Imagine every driver did this you'd
end up with a lot of noise your debug log.
> +
> return 0;
>
> err_free_channels:
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 7a26810..d09e1a7 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -26,6 +26,7 @@
[...]
> /*
> @@ -455,10 +460,15 @@ static int __devinit titsc_probe(struct platform_device *pdev)
>
> /* register to the input system */
> err = input_register_device(input_dev);
> - if (err)
> + if (err) {
> + dev_err(&pdev->dev, "Failed to register input device\n");
> goto err_free_irq;
> + }
>
> platform_set_drvdata(pdev, ts_dev);
> +
> + dev_info(&pdev->dev, "Initialized OK\n");
Same here
WARNING: multiple messages have this Message-ID (diff)
From: Lars-Peter Clausen <lars@metafoo.de>
To: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>,
"Patil, Rachna" <rachna@ti.com>,
linux-iio@vger.kernel.org, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org,
Koen Kooi <koen@dominion.thruhere.net>,
Matt Porter <mporter@ti.com>, Russ Dill <Russ.Dill@ti.com>,
linux-omap@vger.kernel.org
Subject: Re: [PATCH] ti_tscadc: Match mfd sub devices to regmap interface
Date: Tue, 30 Oct 2012 19:21:37 +0100 [thread overview]
Message-ID: <50901AB1.6040005@metafoo.de> (raw)
In-Reply-To: <1351698945-3881-1-git-send-email-panto@antoniou-consulting.com>
On 10/31/2012 04:55 PM, Pantelis Antoniou wrote:
> The MFD parent device now uses a regmap, instead of direct
> memory access. Use the same method in the sub devices to avoid
> nasty surprises.
>
> Also rework the channel initialization of tiadc a bit.
Those two bits are not even closely related, they should really go into
separate patches.
>
> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
> ---
> drivers/iio/adc/ti_am335x_adc.c | 27 +++++++++++++++++++--------
> drivers/input/touchscreen/ti_am335x_tsc.c | 16 +++++++++++++---
> drivers/mfd/ti_am335x_tscadc.c | 7 +++++--
> 3 files changed, 37 insertions(+), 13 deletions(-)
>
[...]
>
> @@ -213,6 +222,8 @@ static int __devinit tiadc_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, indio_dev);
>
> + dev_info(&pdev->dev, "Initialized\n");
That's just noise, please don't add it. Imagine every driver did this you'd
end up with a lot of noise your debug log.
> +
> return 0;
>
> err_free_channels:
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 7a26810..d09e1a7 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -26,6 +26,7 @@
[...]
> /*
> @@ -455,10 +460,15 @@ static int __devinit titsc_probe(struct platform_device *pdev)
>
> /* register to the input system */
> err = input_register_device(input_dev);
> - if (err)
> + if (err) {
> + dev_err(&pdev->dev, "Failed to register input device\n");
> goto err_free_irq;
> + }
>
> platform_set_drvdata(pdev, ts_dev);
> +
> + dev_info(&pdev->dev, "Initialized OK\n");
Same here
next prev parent reply other threads:[~2012-10-30 18:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-31 15:55 [PATCH] ti_tscadc: Match mfd sub devices to regmap interface Pantelis Antoniou
[not found] ` <1351698945-3881-1-git-send-email-panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
2012-10-30 18:21 ` Lars-Peter Clausen [this message]
2012-10-30 18:21 ` Lars-Peter Clausen
2012-10-30 18:30 ` Pantelis Antoniou
2012-10-31 4:41 ` Russ Dill
2012-10-31 5:51 ` Dmitry Torokhov
2012-10-31 8:12 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50901AB1.6040005@metafoo.de \
--to=lars-qo5elluwu/uelga04laivw@public.gmane.org \
--cc=Russ.Dill-l0cyMroinI0@public.gmane.org \
--cc=jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org \
--cc=koen-QLwJDigV5abLmq1fohREcCpxlwaOVQ5f@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mporter-l0cyMroinI0@public.gmane.org \
--cc=panto-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org \
--cc=rachna-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.