Re: OMAP baseline test results for v3.7-rc4

[Jon Hunter <jon-hunter@ti.com>]

On 11/07/2012 11:32 AM, Paul Walmsley wrote:
> On Wed, 7 Nov 2012, Jon Hunter wrote:
> 
>> On 11/04/2012 08:46 PM, Paul Walmsley wrote:
>>
>>> * 4460pandaes: boot fails early
>>>   - Appears to be due to X-loader problems here
>>>   - Need to note the X-loader version so we know it's broken
>>
>> Are you still planning to investigate this further or migrate to a new
>> bootloader?
> 
> Yes.  The problem with the current boot setup is that the new 
> bootloader is breaking as well! :-(

Ugh!

> This can be seen by comparing:
> 
> http://www.pwsan.com/omap/testlogs/test_v3.7-rc1/20121017205513/boot/4460pandaes/4460pandaes_log.txt
> 
> (the old bootloader)
> 
> with
> 
> http://www.pwsan.com/omap/testlogs/test_v3.7-rc4/20121104142910/boot/4460pandaes/4460pandaes_log.txt
> 
> (the new bootloader)

If you get chance, it would be good to test u-boot v2012.10 release, as
I am using this and it is working fine. I see the "new" bootloader you
are using is v2012.07 (however, I though this was working too). Weird ...

> Dealing with this will require hands-on access, and unfortunately, right 
> now I am traveling and away from my testbed.  Next week, will take a 
> closer look.
> 
>> With 4460 and 3.7-rc4, I am seeing that resume from suspend is not
>> working (not sure when this broke though). I am just curious if anyone
>> else sees this. My u-boot version is v2012.10.
> 
> If you have the chance, it would be useful to know if any of the v3.7-rcs 
> worked.  Otherwise, will look at this next week.

Ok, I will see if I can figure out where this broke.

Cheers
Jon