All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Philipp <philipp.andreas@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] ath9k_htc-based adapter unfunctioning after commit ceb26a6013
Date: Mon, 12 Nov 2012 22:03:32 +0100	[thread overview]
Message-ID: <50A16424.5080202@gmail.com> (raw)
In-Reply-To: <CA++BO6SuRgOu7A4BKobrdEeSpSc3UUYHXaECmEGE=R17w7HjQA@mail.gmail.com>

Hello,

I am experiencing exactly the same problem. I will try to revert the
commit in question tomorrow and report the result.

Thanks,
Andreas Philipp

On 11/12/2012 02:34 PM, Corey Richardson wrote:
> I was giving 3.7-rc4 a whirl when I discovered my wireless adapter [0] wasn't
> working: the LED didn't light up. Went and ran 'ip link' and it just hung there.
> Tried a few other things and discovered that sudo was broken too. With
> strace I found that they were hanging in sendto().
>
> If I then unplug the adapter, everything comes out of the hang.
>
> Bisected and found that commit ceb26a6013b962b82f644189ea29d802490fc8fc is
> to blame.
>
> Attached is my .config,. The complete dmesg is attached, as well as
> dmesg_disconnect which is what gets spat out on disconnect of the device.
> strace is an strace of 'ip link'.
>
> I feel like I haven't given enough information; anything else needed?
>
> (Please CC me in any reply to a list; I am not subscribed to them)
>
> [0] - http://support.netgear.com/product/WNA1100
>
> --
> Corey Richardson
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel

WARNING: multiple messages have this Message-ID (diff)
From: Andreas Philipp <philipp.andreas@gmail.com>
To: Corey Richardson <corey@octayn.net>
Cc: linux-wireless@vger.kernel.org, vthiagar@qca.qualcomm.com,
	netdev@vger.kernel.org, jouni@qca.qualcomm.com,
	linville@tuxdriver.com, ath9k-devel@lists.ath9k.org
Subject: Re: [ath9k-devel] ath9k_htc-based adapter unfunctioning after commit ceb26a6013
Date: Mon, 12 Nov 2012 22:03:32 +0100	[thread overview]
Message-ID: <50A16424.5080202@gmail.com> (raw)
In-Reply-To: <CA++BO6SuRgOu7A4BKobrdEeSpSc3UUYHXaECmEGE=R17w7HjQA@mail.gmail.com>

Hello,

I am experiencing exactly the same problem. I will try to revert the
commit in question tomorrow and report the result.

Thanks,
Andreas Philipp

On 11/12/2012 02:34 PM, Corey Richardson wrote:
> I was giving 3.7-rc4 a whirl when I discovered my wireless adapter [0] wasn't
> working: the LED didn't light up. Went and ran 'ip link' and it just hung there.
> Tried a few other things and discovered that sudo was broken too. With
> strace I found that they were hanging in sendto().
>
> If I then unplug the adapter, everything comes out of the hang.
>
> Bisected and found that commit ceb26a6013b962b82f644189ea29d802490fc8fc is
> to blame.
>
> Attached is my .config,. The complete dmesg is attached, as well as
> dmesg_disconnect which is what gets spat out on disconnect of the device.
> strace is an strace of 'ip link'.
>
> I feel like I haven't given enough information; anything else needed?
>
> (Please CC me in any reply to a list; I am not subscribed to them)
>
> [0] - http://support.netgear.com/product/WNA1100
>
> --
> Corey Richardson
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel


  reply	other threads:[~2012-11-12 21:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-12 13:34 [ath9k-devel] ath9k_htc-based adapter unfunctioning after commit ceb26a6013 Corey Richardson
2012-11-12 13:34 ` Corey Richardson
2012-11-12 21:03 ` Andreas Philipp [this message]
2012-11-12 21:03   ` [ath9k-devel] " Andreas Philipp
2012-11-12 21:39 ` Adrian Chadd
2012-11-12 21:39   ` Adrian Chadd
2012-11-12 21:49   ` [ath9k-devel] " Corey Richardson
2012-11-12 21:49     ` Corey Richardson
2012-11-12 21:49     ` Corey Richardson
2012-11-13  7:28 ` [ath9k-devel] " Sujith Manoharan
2012-11-13  7:28   ` Sujith Manoharan
2012-11-13  7:28   ` Sujith Manoharan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50A16424.5080202@gmail.com \
    --to=philipp.andreas@gmail.com \
    --cc=ath9k-devel@lists.ath9k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.