From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 2/6] ux500-firmware: new package
Date: Mon, 12 Nov 2012 22:44:21 +0100 [thread overview]
Message-ID: <50A16DB5.8090101@mind.be> (raw)
In-Reply-To: <1352742102-19010-3-git-send-email-gregory.hermant@calao-systems.com>
On 11/12/12 18:41, Gregory Hermant wrote:
>
> Signed-off-by: Gregory Hermant<gregory.hermant@calao-systems.com>
> ---
> package/Config.in | 1 +
> package/ux500-firmware/Config.in | 7 +++++++
> package/ux500-firmware/ux500-firmware.mk | 20 ++++++++++++++++++++
> 3 files changed, 28 insertions(+)
> create mode 100644 package/ux500-firmware/Config.in
> create mode 100644 package/ux500-firmware/ux500-firmware.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index cb78d2f..6da6e73 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -261,6 +261,7 @@ source "package/usb_modeswitch/Config.in"
> source "package/usb_modeswitch_data/Config.in"
> source "package/usbmount/Config.in"
> source "package/usbutils/Config.in"
> +source "package/ux500-firmware/Config.in"
> source "package/wipe/Config.in"
> endmenu
>
> diff --git a/package/ux500-firmware/Config.in b/package/ux500-firmware/Config.in
> new file mode 100644
> index 0000000..7e8a94b
> --- /dev/null
> +++ b/package/ux500-firmware/Config.in
> @@ -0,0 +1,7 @@
> +config BR2_PACKAGE_UX500_FIRMWARE
> + bool "ux500-firmware"
> + help
> + This package provides various binary firmware files (closed binary blobs)
> + for the Azurewave AW-NH580 combo module (wifi, bt, gps).
> +
> + https://launchpad.net/~igloocommunity-maintainers/+archive/snowball/+files/
> diff --git a/package/ux500-firmware/ux500-firmware.mk b/package/ux500-firmware/ux500-firmware.mk
> new file mode 100644
> index 0000000..522113a
> --- /dev/null
> +++ b/package/ux500-firmware/ux500-firmware.mk
> @@ -0,0 +1,20 @@
> +#############################################################
> +#
> +# ux500-firmware
> +#
> +#############################################################
> +UX500_FIRMWARE_VERSION = 1.1.3-6
> +UX500_FIRMWARE_SOURCE = ux500-firmware_$(UX500_FIRMWARE_VERSION)linaro1.tar.gz
> +UX500_FIRMWARE_SITE = https://launchpad.net/~igloocommunity-maintainers/+archive/snowball/+files/
> +UX500_FIRMWARE_LICENSE = Snowball click-wrap license
UX500_FIRMWARE_LICENSE_FILES = license.txt
> +UX500_FIRMWARE_REDISTRIBUTE = NO
> +
> +define UX500_FIRMWARE_INSTALL_TARGET_CMDS
> + mkdir -p $(TARGET_DIR)/lib/firmware
> + cp -r $(@D)/* $(TARGET_DIR)/lib/firmware/
This also installs the debian directory etc. to the target. Why not use
the Makefile that is delivered with the package?
> + for f in $(TARGET_DIR)/lib/firmware/CG2900* ; do \
> + mv $$f $${f/CG2900/CG29XX}; \
> + done
This warrants a comment why it is needed to rename some files.
> +endef
> +
> +$(eval $(generic-package))
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2012-11-12 21:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-12 17:41 [Buildroot] [PATCH v2 0/6] Add support for the snowball board Gregory Hermant
2012-11-12 17:41 ` [Buildroot] [PATCH v2 1/6] hdmiservice: new package Gregory Hermant
2012-11-12 18:34 ` Thomas Petazzoni
2012-11-13 11:03 ` Grégory Hermant
2012-11-13 11:06 ` Thomas Petazzoni
2012-11-12 17:41 ` [Buildroot] [PATCH v2 2/6] ux500-firmware: " Gregory Hermant
2012-11-12 21:44 ` Arnout Vandecappelle [this message]
2012-11-12 17:41 ` [Buildroot] [PATCH v2 3/6] Add board files for snowball Gregory Hermant
2012-11-12 18:37 ` Thomas Petazzoni
2012-11-13 11:03 ` Grégory Hermant
2012-11-13 21:18 ` Arnout Vandecappelle
2012-11-12 17:41 ` [Buildroot] [PATCH v2 4/6] Add init script files for snowball board Gregory Hermant
2012-11-12 21:45 ` Arnout Vandecappelle
2012-11-12 17:41 ` [Buildroot] [PATCH v2 5/6] bluez-utils: add cg2900 support " Gregory Hermant
2012-11-12 21:47 ` Arnout Vandecappelle
2012-11-12 17:41 ` [Buildroot] [PATCH v2 6/6] Add config file for the " Gregory Hermant
2012-11-12 21:53 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50A16DB5.8090101@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.