All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel list <linux-kernel@vger.kernel.org>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
	Ludovic Desroches <ludovic.desroches@atmel.com>,
	Chris Ball <cjb@laptop.org>,
	linux-mmc@vger.kernel.org
Subject: [GIT PULL] at91: fixes for 3.7-rc7
Date: Mon, 19 Nov 2012 17:31:17 +0100	[thread overview]
Message-ID: <50AA5ED5.8090901@atmel.com> (raw)

Arnd, Olof,

Here is another "fixes" pull request for AT91. It enables the sd/mmc driver
for Device Tree enabled platforms. Those patches where part of a series that
was split in two for reaching upstream: the MMC part is already in Linus' tree
and this is the arm-soc part.
I have placed these patches on top of the fixes that you already have for AT91.

The following changes since commit 641f3ce64b050961d454a0716bb6dbf528315aac:

  ARM: at91/usbh: fix overcurrent gpio setup (2012-11-16 10:46:29 +0100)

are available in the git repository at:

  git://github.com/at91linux/linux-at91.git tags/at91-fixes

for you to fetch changes up to 83ce1c55cfb639438c2516cb05f3b8ee472023e5:

  ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards (2012-11-19 17:02:40 +0100)

----------------------------------------------------------------
Add entries for enabling the use of sd/mmc driver on AT91.
Those entries where missing for device tree use on these
platforms.

----------------------------------------------------------------
Ludovic Desroches (3):
      ARM: at91: add clocks for DT entries
      ARM: at91/dts: add nodes for atmel hsmci controllers for atmel SOCs
      ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards

 arch/arm/boot/dts/at91sam9260.dtsi          |  9 +++++++++
 arch/arm/boot/dts/at91sam9263.dtsi          | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9263ek.dts         | 10 ++++++++++
 arch/arm/boot/dts/at91sam9g20ek_2mmc.dts    | 12 ++++++++++++
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi |  9 +++++++++
 arch/arm/boot/dts/at91sam9g25ek.dts         | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9g45.dtsi          | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9m10g45ek.dts      | 19 +++++++++++++++++++
 arch/arm/boot/dts/at91sam9n12.dtsi          |  9 +++++++++
 arch/arm/boot/dts/at91sam9n12ek.dts         |  9 +++++++++
 arch/arm/boot/dts/at91sam9x5.dtsi           | 18 ++++++++++++++++++
 arch/arm/mach-at91/at91sam9260.c            |  1 +
 arch/arm/mach-at91/at91sam9263.c            |  2 ++
 arch/arm/mach-at91/at91sam9g45.c            |  2 ++
 arch/arm/mach-at91/at91sam9n12.c            |  1 +
 arch/arm/mach-at91/at91sam9x5.c             |  2 ++
 16 files changed, 157 insertions(+)

-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] at91: fixes for 3.7-rc7
Date: Mon, 19 Nov 2012 17:31:17 +0100	[thread overview]
Message-ID: <50AA5ED5.8090901@atmel.com> (raw)

Arnd, Olof,

Here is another "fixes" pull request for AT91. It enables the sd/mmc driver
for Device Tree enabled platforms. Those patches where part of a series that
was split in two for reaching upstream: the MMC part is already in Linus' tree
and this is the arm-soc part.
I have placed these patches on top of the fixes that you already have for AT91.

The following changes since commit 641f3ce64b050961d454a0716bb6dbf528315aac:

  ARM: at91/usbh: fix overcurrent gpio setup (2012-11-16 10:46:29 +0100)

are available in the git repository at:

  git://github.com/at91linux/linux-at91.git tags/at91-fixes

for you to fetch changes up to 83ce1c55cfb639438c2516cb05f3b8ee472023e5:

  ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards (2012-11-19 17:02:40 +0100)

----------------------------------------------------------------
Add entries for enabling the use of sd/mmc driver on AT91.
Those entries where missing for device tree use on these
platforms.

----------------------------------------------------------------
Ludovic Desroches (3):
      ARM: at91: add clocks for DT entries
      ARM: at91/dts: add nodes for atmel hsmci controllers for atmel SOCs
      ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards

 arch/arm/boot/dts/at91sam9260.dtsi          |  9 +++++++++
 arch/arm/boot/dts/at91sam9263.dtsi          | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9263ek.dts         | 10 ++++++++++
 arch/arm/boot/dts/at91sam9g20ek_2mmc.dts    | 12 ++++++++++++
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi |  9 +++++++++
 arch/arm/boot/dts/at91sam9g25ek.dts         | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9g45.dtsi          | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9m10g45ek.dts      | 19 +++++++++++++++++++
 arch/arm/boot/dts/at91sam9n12.dtsi          |  9 +++++++++
 arch/arm/boot/dts/at91sam9n12ek.dts         |  9 +++++++++
 arch/arm/boot/dts/at91sam9x5.dtsi           | 18 ++++++++++++++++++
 arch/arm/mach-at91/at91sam9260.c            |  1 +
 arch/arm/mach-at91/at91sam9263.c            |  2 ++
 arch/arm/mach-at91/at91sam9g45.c            |  2 ++
 arch/arm/mach-at91/at91sam9n12.c            |  1 +
 arch/arm/mach-at91/at91sam9x5.c             |  2 ++
 16 files changed, 157 insertions(+)

-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel list <linux-kernel@vger.kernel.org>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
	"Ludovic Desroches" <ludovic.desroches@atmel.com>,
	Chris Ball <cjb@laptop.org>, <linux-mmc@vger.kernel.org>
Subject: [GIT PULL] at91: fixes for 3.7-rc7
Date: Mon, 19 Nov 2012 17:31:17 +0100	[thread overview]
Message-ID: <50AA5ED5.8090901@atmel.com> (raw)

Arnd, Olof,

Here is another "fixes" pull request for AT91. It enables the sd/mmc driver
for Device Tree enabled platforms. Those patches where part of a series that
was split in two for reaching upstream: the MMC part is already in Linus' tree
and this is the arm-soc part.
I have placed these patches on top of the fixes that you already have for AT91.

The following changes since commit 641f3ce64b050961d454a0716bb6dbf528315aac:

  ARM: at91/usbh: fix overcurrent gpio setup (2012-11-16 10:46:29 +0100)

are available in the git repository at:

  git://github.com/at91linux/linux-at91.git tags/at91-fixes

for you to fetch changes up to 83ce1c55cfb639438c2516cb05f3b8ee472023e5:

  ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards (2012-11-19 17:02:40 +0100)

----------------------------------------------------------------
Add entries for enabling the use of sd/mmc driver on AT91.
Those entries where missing for device tree use on these
platforms.

----------------------------------------------------------------
Ludovic Desroches (3):
      ARM: at91: add clocks for DT entries
      ARM: at91/dts: add nodes for atmel hsmci controllers for atmel SOCs
      ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards

 arch/arm/boot/dts/at91sam9260.dtsi          |  9 +++++++++
 arch/arm/boot/dts/at91sam9263.dtsi          | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9263ek.dts         | 10 ++++++++++
 arch/arm/boot/dts/at91sam9g20ek_2mmc.dts    | 12 ++++++++++++
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi |  9 +++++++++
 arch/arm/boot/dts/at91sam9g25ek.dts         | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9g45.dtsi          | 18 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9m10g45ek.dts      | 19 +++++++++++++++++++
 arch/arm/boot/dts/at91sam9n12.dtsi          |  9 +++++++++
 arch/arm/boot/dts/at91sam9n12ek.dts         |  9 +++++++++
 arch/arm/boot/dts/at91sam9x5.dtsi           | 18 ++++++++++++++++++
 arch/arm/mach-at91/at91sam9260.c            |  1 +
 arch/arm/mach-at91/at91sam9263.c            |  2 ++
 arch/arm/mach-at91/at91sam9g45.c            |  2 ++
 arch/arm/mach-at91/at91sam9n12.c            |  1 +
 arch/arm/mach-at91/at91sam9x5.c             |  2 ++
 16 files changed, 157 insertions(+)

-- 
Nicolas Ferre

             reply	other threads:[~2012-11-19 16:31 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-19 16:31 Nicolas Ferre [this message]
2012-11-19 16:31 ` [GIT PULL] at91: fixes for 3.7-rc7 Nicolas Ferre
2012-11-19 16:31 ` Nicolas Ferre
2012-11-19 16:52 ` Olof Johansson
2012-11-19 16:52   ` Olof Johansson
2012-11-19 17:29   ` Nicolas Ferre
2012-11-19 17:29     ` Nicolas Ferre
2012-11-19 17:29     ` Nicolas Ferre
2012-11-20  8:59     ` [GIT PULL v2] " Nicolas Ferre
2012-11-20  8:59       ` Nicolas Ferre
2012-11-20  8:59       ` Nicolas Ferre
2012-11-21  7:03       ` Olof Johansson
2012-11-21  7:03         ` Olof Johansson
2012-11-21 11:25         ` Nicolas Ferre
2012-11-21 11:25           ` Nicolas Ferre
2012-11-21 11:25           ` Nicolas Ferre
2012-11-20 18:47     ` [GIT PULL] " Linus Walleij
2012-11-20 18:47       ` Linus Walleij
2012-11-20 20:00       ` Jean-Christophe PLAGNIOL-VILLARD
2012-11-20 20:00         ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50AA5ED5.8090901@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=arnd@arndb.de \
    --cc=cjb@laptop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ludovic.desroches@atmel.com \
    --cc=olof@lixom.net \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.