From: Marc Kleine-Budde <mkl@pengutronix.de>
To: AnilKumar Ch <anilkumar@ti.com>
Cc: wg@grandegger.com, swarren@wwwdotorg.org,
linux-can@vger.kernel.org, tony@atomide.com, b-cousson@ti.com,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
grant.likely@secretlab.ca, devicetree-discuss@lists.ozlabs.org
Subject: Re: [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node
Date: Tue, 20 Nov 2012 11:13:04 +0100 [thread overview]
Message-ID: <50AB57B0.7040502@pengutronix.de> (raw)
In-Reply-To: <1352916505-12343-4-git-send-email-anilkumar@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1241 bytes --]
On 11/14/2012 07:08 PM, AnilKumar Ch wrote:
> Add a new address space/memory resource to d_can device tree node. D_CAN
> RAM initialization is achieved through RAMINIT register which is part of
> AM33XX control module address space. D_CAN RAM init or de-init should be
> done by writing instance corresponding value to control module register.
>
> Till we have a separate control module driver to write to control module,
> d_can driver will handle the register writes to control module by itself.
> So a new address space to represent this control module register is added
> to d_can driver.
>
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
This does not apply to net-next/master:
Applying: ARM: dts: AM33XX: Add memory resource to d_can node
error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227
error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply
Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 261 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node
Date: Tue, 20 Nov 2012 11:13:04 +0100 [thread overview]
Message-ID: <50AB57B0.7040502@pengutronix.de> (raw)
In-Reply-To: <1352916505-12343-4-git-send-email-anilkumar@ti.com>
On 11/14/2012 07:08 PM, AnilKumar Ch wrote:
> Add a new address space/memory resource to d_can device tree node. D_CAN
> RAM initialization is achieved through RAMINIT register which is part of
> AM33XX control module address space. D_CAN RAM init or de-init should be
> done by writing instance corresponding value to control module register.
>
> Till we have a separate control module driver to write to control module,
> d_can driver will handle the register writes to control module by itself.
> So a new address space to represent this control module register is added
> to d_can driver.
>
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
This does not apply to net-next/master:
Applying: ARM: dts: AM33XX: Add memory resource to d_can node
error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227
error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply
Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 261 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121120/b22fa99d/attachment.sig>
next prev parent reply other threads:[~2012-11-20 10:13 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-14 18:08 [PATCH 0/3] can: Add D_CAN raminit support to am335x-evm AnilKumar Ch
2012-11-14 18:08 ` AnilKumar Ch
2012-11-14 18:08 ` [PATCH 1/3] can: c_can: Add d_can raminit support AnilKumar Ch
2012-11-14 18:08 ` AnilKumar Ch
[not found] ` <1352916505-12343-2-git-send-email-anilkumar-l0cyMroinI0@public.gmane.org>
2012-11-20 10:50 ` Marc Kleine-Budde
2012-11-20 10:50 ` Marc Kleine-Budde
2012-11-20 13:05 ` AnilKumar, Chimata
2012-11-20 13:05 ` AnilKumar, Chimata
2012-11-20 13:46 ` Marc Kleine-Budde
2012-11-20 13:46 ` Marc Kleine-Budde
[not found] ` <1352916505-12343-1-git-send-email-anilkumar-l0cyMroinI0@public.gmane.org>
2012-11-14 18:08 ` [PATCH 2/3] ARM: dts: AM33XX: Add d_can instances to aliases AnilKumar Ch
2012-11-14 18:08 ` AnilKumar Ch
[not found] ` <1352916505-12343-3-git-send-email-anilkumar-l0cyMroinI0@public.gmane.org>
2012-11-20 10:51 ` Marc Kleine-Budde
2012-11-20 10:51 ` Marc Kleine-Budde
2013-01-02 10:13 ` AnilKumar, Chimata
2013-01-02 10:13 ` AnilKumar, Chimata
2012-11-20 5:00 ` [PATCH 0/3] can: Add D_CAN raminit support to am335x-evm AnilKumar, Chimata
2012-11-20 5:00 ` AnilKumar, Chimata
2012-11-14 18:08 ` [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node AnilKumar Ch
2012-11-14 18:08 ` AnilKumar Ch
2012-11-20 10:13 ` Marc Kleine-Budde [this message]
2012-11-20 10:13 ` Marc Kleine-Budde
2012-11-20 10:23 ` AnilKumar, Chimata
2012-11-20 10:23 ` AnilKumar, Chimata
[not found] ` <331ABD5ECB02734CA317220B2BBEABC13EA7701D-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-11-20 10:26 ` Marc Kleine-Budde
2012-11-20 10:26 ` Marc Kleine-Budde
2012-11-21 5:45 ` AnilKumar, Chimata
2012-11-21 5:45 ` AnilKumar, Chimata
[not found] ` <331ABD5ECB02734CA317220B2BBEABC13EA778F3-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-11-21 8:20 ` Marc Kleine-Budde
2012-11-21 8:20 ` Marc Kleine-Budde
2012-11-21 8:20 ` Marc Kleine-Budde
2012-11-21 8:20 ` Marc Kleine-Budde
2013-01-02 10:14 ` AnilKumar, Chimata
2013-01-02 10:14 ` AnilKumar, Chimata
2013-01-09 12:16 ` [PATCH 0/3] can: Add D_CAN raminit support to am335x-evm Benoit Cousson
2013-01-09 12:16 ` Benoit Cousson
2013-01-09 12:20 ` AnilKumar, Chimata
2013-01-09 12:20 ` AnilKumar, Chimata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50AB57B0.7040502@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=anilkumar@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.