From: Marc Kleine-Budde <mkl@pengutronix.de>
To: AnilKumar Ch <anilkumar@ti.com>
Cc: wg@grandegger.com, swarren@wwwdotorg.org,
linux-can@vger.kernel.org, tony@atomide.com, b-cousson@ti.com,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
grant.likely@secretlab.ca, devicetree-discuss@lists.ozlabs.org
Subject: Re: [PATCH v2] can: c_can: Add d_can raminit support
Date: Wed, 21 Nov 2012 09:48:56 +0100 [thread overview]
Message-ID: <50AC9578.4030505@pengutronix.de> (raw)
In-Reply-To: <1353476650-24398-1-git-send-email-anilkumar@ti.com>
[-- Attachment #1: Type: text/plain, Size: 2334 bytes --]
On 11/21/2012 06:44 AM, AnilKumar Ch wrote:
> Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM,
> which holds all the message objects during transmission or
> receiving of data. This initialization/de-initialization should
> be done in synchronous with D_CAN clock.
>
> In case of AM335X-EVM (current user of D_CAN driver) message RAM is
> controlled through control module register for both instances. So
> control module register details is required to initialization or
> de-initialization of message RAM according to instance number.
>
> Control module memory resource is obtained from D_CAN dt node and
> instance number obtained from device tree aliases node.
>
> This patch was tested on AM335x-EVM along with pinctrl data addition
> patch, d_can dt aliases addition and control module data addition.
> pinctrl data addition is not added to am335x-evm.dts (only supports
> CPLD profile#0) because d_can1 is supported under CPLD profile#1.
>
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> ---
[...]
> @@ -178,6 +195,20 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
> priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
> priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
> priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
> +
> + if (pdev->dev.of_node)
> + priv->instance = pdev->id < 0 ?
> + of_alias_get_id(pdev->dev.of_node, "d_can") :
> + pdev->id;
This wouldn't work with non DT kernels, what about:
if (pdev->dev.of_node)
priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
else
priv->instance = pdev->id;
Marc
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + priv->raminit_ctrlreg =
> + devm_request_and_ioremap(&pdev->dev, res);
> + if (!priv->raminit_ctrlreg || priv->instance < 0) {
> + dev_info(&pdev->dev, "control memory is not used for raminit\n");
> + break;
> + }
> + priv->ram_init = c_can_hw_raminit;
> break;
> default:
> ret = -EINVAL;
>
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 261 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] can: c_can: Add d_can raminit support
Date: Wed, 21 Nov 2012 09:48:56 +0100 [thread overview]
Message-ID: <50AC9578.4030505@pengutronix.de> (raw)
In-Reply-To: <1353476650-24398-1-git-send-email-anilkumar@ti.com>
On 11/21/2012 06:44 AM, AnilKumar Ch wrote:
> Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM,
> which holds all the message objects during transmission or
> receiving of data. This initialization/de-initialization should
> be done in synchronous with D_CAN clock.
>
> In case of AM335X-EVM (current user of D_CAN driver) message RAM is
> controlled through control module register for both instances. So
> control module register details is required to initialization or
> de-initialization of message RAM according to instance number.
>
> Control module memory resource is obtained from D_CAN dt node and
> instance number obtained from device tree aliases node.
>
> This patch was tested on AM335x-EVM along with pinctrl data addition
> patch, d_can dt aliases addition and control module data addition.
> pinctrl data addition is not added to am335x-evm.dts (only supports
> CPLD profile#0) because d_can1 is supported under CPLD profile#1.
>
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> ---
[...]
> @@ -178,6 +195,20 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
> priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
> priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
> priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
> +
> + if (pdev->dev.of_node)
> + priv->instance = pdev->id < 0 ?
> + of_alias_get_id(pdev->dev.of_node, "d_can") :
> + pdev->id;
This wouldn't work with non DT kernels, what about:
if (pdev->dev.of_node)
priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
else
priv->instance = pdev->id;
Marc
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + priv->raminit_ctrlreg =
> + devm_request_and_ioremap(&pdev->dev, res);
> + if (!priv->raminit_ctrlreg || priv->instance < 0) {
> + dev_info(&pdev->dev, "control memory is not used for raminit\n");
> + break;
> + }
> + priv->ram_init = c_can_hw_raminit;
> break;
> default:
> ret = -EINVAL;
>
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 261 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121121/54fc9e3c/attachment.sig>
next prev parent reply other threads:[~2012-11-21 8:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-21 5:44 [PATCH v2] can: c_can: Add d_can raminit support AnilKumar Ch
2012-11-21 5:44 ` AnilKumar Ch
[not found] ` <1353476650-24398-1-git-send-email-anilkumar-l0cyMroinI0@public.gmane.org>
2012-11-21 8:27 ` Marc Kleine-Budde
2012-11-21 8:27 ` Marc Kleine-Budde
[not found] ` <50AC9065.4010705-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-21 8:37 ` AnilKumar, Chimata
2012-11-21 8:37 ` AnilKumar, Chimata
2012-11-21 8:48 ` Marc Kleine-Budde [this message]
2012-11-21 8:48 ` Marc Kleine-Budde
2012-11-21 8:58 ` AnilKumar, Chimata
2012-11-21 8:58 ` AnilKumar, Chimata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50AC9578.4030505@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=anilkumar@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.