All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Javier Martinez Canillas
	<javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Enric Balletbo i Serra
	<eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Enrico Butera <ebutera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Matthias Brugger
	<matthias.bgg-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Subject: Re: [PATCH 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
Date: Fri, 30 Nov 2012 10:48:04 +0100	[thread overview]
Message-ID: <50B880D4.9050906@gmail.com> (raw)
In-Reply-To: <1354144466-750-2-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>

On 11/29/2012 12:14 AM, Javier Martinez Canillas wrote:
> Add a generic .dtsi device tree source file for the
> common characteristics across IGEP Technology devices.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> ---
Acked-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

>   arch/arm/boot/dts/omap3-igep.dtsi |   93 +++++++++++++++++++++++++++++++++++++
>   1 files changed, 93 insertions(+), 0 deletions(-)
>   create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi
>
> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
> new file mode 100644
> index 0000000..a093bff
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
> @@ -0,0 +1,93 @@
> +/*
> + * Device Tree Source for IGEP Technology devices
> + *
> + * Copyright (C) 2012 Javier Martinez Canillas <javier-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +
> +/ {
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +
> +	sound {
> +		compatible = "ti,omap-twl4030";
> +		ti,model = "igep2";
> +		ti,mcbsp = <&mcbsp2>;
> +		ti,codec = <&twl_audio>;
> +	};
> +};
> +
> +&omap3_pmx_core {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <
> +		  &mcbsp2_pins
> +	>;
> +
> +	uart3_pins: pinmux_uart3_pins {
> +		pinctrl-single,pins = <
> +			0x16e 0x100	/* uart3_rx.uart3_rx INPUT | MODE0 */
> +			0x170 0		/* uart3_tx.uart3_tx OUTPUT | MODE0 */
> +		>;
> +	};
> +
> +	mcbsp2_pins: pinmux_mcbsp2_pins {
> +		pinctrl-single,pins = <
> +			0x1a2 0x0104	/* mcspi1_cs2.gpio_176 INPUT | MODE4 */
> +		>;
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <2600000>;
> +
> +	twl: twl@48 {
> +		reg = <0x48>;
> +		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> +		interrupt-parent = <&intc>;
> +
> +		vsim: regulator@10 {
> +			compatible = "ti,twl4030-vsim";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3000000>;
> +		};
> +
> +		twl_audio: audio {
> +			compatible = "ti,twl4030-audio";
> +			codec {
> +			      };
> +		};
> +	};
> +};
> +
> +/include/ "twl4030.dtsi"
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +};
> +
> +&mmc1 {
> +	vmmc-supply = <&vmmc1>;
> +	vmmc_aux-supply = <&vsim>;
> +	bus-width = <8>;
> +};
> +
> +&mmc2 {
> +	status = "disabled";
> +};
> +
> +&mmc3 {
> +	status = "disabled";
> +};
> +
> +&twl_gpio {
> +	ti,use-leds;
> +};
>

WARNING: multiple messages have this Message-ID (diff)
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
Date: Fri, 30 Nov 2012 10:48:04 +0100	[thread overview]
Message-ID: <50B880D4.9050906@gmail.com> (raw)
In-Reply-To: <1354144466-750-2-git-send-email-javier.martinez@collabora.co.uk>

On 11/29/2012 12:14 AM, Javier Martinez Canillas wrote:
> Add a generic .dtsi device tree source file for the
> common characteristics across IGEP Technology devices.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>

>   arch/arm/boot/dts/omap3-igep.dtsi |   93 +++++++++++++++++++++++++++++++++++++
>   1 files changed, 93 insertions(+), 0 deletions(-)
>   create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi
>
> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
> new file mode 100644
> index 0000000..a093bff
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
> @@ -0,0 +1,93 @@
> +/*
> + * Device Tree Source for IGEP Technology devices
> + *
> + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +
> +/ {
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +
> +	sound {
> +		compatible = "ti,omap-twl4030";
> +		ti,model = "igep2";
> +		ti,mcbsp = <&mcbsp2>;
> +		ti,codec = <&twl_audio>;
> +	};
> +};
> +
> +&omap3_pmx_core {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <
> +		  &mcbsp2_pins
> +	>;
> +
> +	uart3_pins: pinmux_uart3_pins {
> +		pinctrl-single,pins = <
> +			0x16e 0x100	/* uart3_rx.uart3_rx INPUT | MODE0 */
> +			0x170 0		/* uart3_tx.uart3_tx OUTPUT | MODE0 */
> +		>;
> +	};
> +
> +	mcbsp2_pins: pinmux_mcbsp2_pins {
> +		pinctrl-single,pins = <
> +			0x1a2 0x0104	/* mcspi1_cs2.gpio_176 INPUT | MODE4 */
> +		>;
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <2600000>;
> +
> +	twl: twl at 48 {
> +		reg = <0x48>;
> +		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> +		interrupt-parent = <&intc>;
> +
> +		vsim: regulator at 10 {
> +			compatible = "ti,twl4030-vsim";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3000000>;
> +		};
> +
> +		twl_audio: audio {
> +			compatible = "ti,twl4030-audio";
> +			codec {
> +			      };
> +		};
> +	};
> +};
> +
> +/include/ "twl4030.dtsi"
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +};
> +
> +&mmc1 {
> +	vmmc-supply = <&vmmc1>;
> +	vmmc_aux-supply = <&vsim>;
> +	bus-width = <8>;
> +};
> +
> +&mmc2 {
> +	status = "disabled";
> +};
> +
> +&mmc3 {
> +	status = "disabled";
> +};
> +
> +&twl_gpio {
> +	ti,use-leds;
> +};
>

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Benoit Cousson <b-cousson@ti.com>,
	Tony Lindgren <tony@atomide.com>,
	grant.likely@secretlab.ca,
	Enric Balletbo i Serra <eballetbo@gmail.com>,
	Ezequiel Garcia <elezegarcia@gmail.com>,
	Enrico Butera <ebutera@gmail.com>,
	Matthias Brugger <matthias.bgg@googlemail.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree-discuss@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
Date: Fri, 30 Nov 2012 10:48:04 +0100	[thread overview]
Message-ID: <50B880D4.9050906@gmail.com> (raw)
In-Reply-To: <1354144466-750-2-git-send-email-javier.martinez@collabora.co.uk>

On 11/29/2012 12:14 AM, Javier Martinez Canillas wrote:
> Add a generic .dtsi device tree source file for the
> common characteristics across IGEP Technology devices.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>

>   arch/arm/boot/dts/omap3-igep.dtsi |   93 +++++++++++++++++++++++++++++++++++++
>   1 files changed, 93 insertions(+), 0 deletions(-)
>   create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi
>
> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
> new file mode 100644
> index 0000000..a093bff
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
> @@ -0,0 +1,93 @@
> +/*
> + * Device Tree Source for IGEP Technology devices
> + *
> + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +
> +/ {
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +
> +	sound {
> +		compatible = "ti,omap-twl4030";
> +		ti,model = "igep2";
> +		ti,mcbsp = <&mcbsp2>;
> +		ti,codec = <&twl_audio>;
> +	};
> +};
> +
> +&omap3_pmx_core {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <
> +		  &mcbsp2_pins
> +	>;
> +
> +	uart3_pins: pinmux_uart3_pins {
> +		pinctrl-single,pins = <
> +			0x16e 0x100	/* uart3_rx.uart3_rx INPUT | MODE0 */
> +			0x170 0		/* uart3_tx.uart3_tx OUTPUT | MODE0 */
> +		>;
> +	};
> +
> +	mcbsp2_pins: pinmux_mcbsp2_pins {
> +		pinctrl-single,pins = <
> +			0x1a2 0x0104	/* mcspi1_cs2.gpio_176 INPUT | MODE4 */
> +		>;
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <2600000>;
> +
> +	twl: twl@48 {
> +		reg = <0x48>;
> +		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> +		interrupt-parent = <&intc>;
> +
> +		vsim: regulator@10 {
> +			compatible = "ti,twl4030-vsim";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3000000>;
> +		};
> +
> +		twl_audio: audio {
> +			compatible = "ti,twl4030-audio";
> +			codec {
> +			      };
> +		};
> +	};
> +};
> +
> +/include/ "twl4030.dtsi"
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +};
> +
> +&mmc1 {
> +	vmmc-supply = <&vmmc1>;
> +	vmmc_aux-supply = <&vsim>;
> +	bus-width = <8>;
> +};
> +
> +&mmc2 {
> +	status = "disabled";
> +};
> +
> +&mmc3 {
> +	status = "disabled";
> +};
> +
> +&twl_gpio {
> +	ti,use-leds;
> +};
>


  parent reply	other threads:[~2012-11-30  9:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-28 23:14 [PATCH 0/3] ARM/dts: omap3: Add DT support for IGEP devices Javier Martinez Canillas
2012-11-28 23:14 ` Javier Martinez Canillas
2012-11-28 23:14 ` [PATCH 1/3] ARM/dts: omap3: Add generic " Javier Martinez Canillas
2012-11-28 23:14   ` Javier Martinez Canillas
     [not found]   ` <1354144466-750-2-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2012-11-30  9:48     ` Matthias Brugger [this message]
2012-11-30  9:48       ` Matthias Brugger
2012-11-30  9:48       ` Matthias Brugger
2012-11-28 23:14 ` [PATCH 2/3] ARM/dts: omap3: Add support for IGEPv2 board Javier Martinez Canillas
2012-11-28 23:14   ` Javier Martinez Canillas
     [not found]   ` <1354144466-750-3-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2012-11-30  9:48     ` Matthias Brugger
2012-11-30  9:48       ` Matthias Brugger
2012-11-30  9:48       ` Matthias Brugger
2012-11-28 23:14 ` [PATCH 3/3] ARM/dts: omap3: Add support for IGEP COM Module Javier Martinez Canillas
2012-11-28 23:14   ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50B880D4.9050906@gmail.com \
    --to=matthias.bgg-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=ebutera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=matthias.bgg-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.