* [PATCH 1/4] iio:common: Add STMicroelectronics common library
2012-12-13 13:11 STMicroelectronics sensors driver Denis CIOCCA
@ 2012-12-13 13:11 ` Denis CIOCCA
2012-12-16 12:15 ` Jonathan Cameron
2012-12-13 13:11 ` [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver Denis CIOCCA
` (3 subsequent siblings)
4 siblings, 1 reply; 15+ messages in thread
From: Denis CIOCCA @ 2012-12-13 13:11 UTC (permalink / raw)
To: jic23, lars; +Cc: linux-iio, Denis Ciocca
This patch add generic library for STMicroelectronics 3-axis sensors.
---
drivers/iio/common/Kconfig | 1 +
drivers/iio/common/Makefile | 1 +
drivers/iio/common/st_sensors/Kconfig | 30 ++
drivers/iio/common/st_sensors/Makefile | 9 +
drivers/iio/common/st_sensors/st_sensors_buffer.c | 115 +++++++
drivers/iio/common/st_sensors/st_sensors_core.c | 335 ++++++++++++++++++++
drivers/iio/common/st_sensors/st_sensors_i2c.c | 78 +++++
drivers/iio/common/st_sensors/st_sensors_spi.c | 124 +++++++
drivers/iio/common/st_sensors/st_sensors_trigger.c | 76 +++++
include/linux/iio/common/st_sensors.h | 246 ++++++++++++++
10 files changed, 1015 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/common/st_sensors/Kconfig
create mode 100644 drivers/iio/common/st_sensors/Makefile
create mode 100644 drivers/iio/common/st_sensors/st_sensors_buffer.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_core.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_i2c.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_spi.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_trigger.c
create mode 100644 include/linux/iio/common/st_sensors.h
diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
index ed45ee5..0b6e97d 100644
--- a/drivers/iio/common/Kconfig
+++ b/drivers/iio/common/Kconfig
@@ -3,3 +3,4 @@
#
source "drivers/iio/common/hid-sensors/Kconfig"
+source "drivers/iio/common/st_sensors/Kconfig"
diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
index 8158400..c2352be 100644
--- a/drivers/iio/common/Makefile
+++ b/drivers/iio/common/Makefile
@@ -7,3 +7,4 @@
#
obj-y += hid-sensors/
+obj-y += st_sensors/
diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig
new file mode 100644
index 0000000..ddcfcc6
--- /dev/null
+++ b/drivers/iio/common/st_sensors/Kconfig
@@ -0,0 +1,30 @@
+#
+# Hid Sensor common modules
+#
+menu "STMicroelectronics sensors library"
+
+config ST_SENSORS_CORE
+ tristate "Common modules for all ST sensors IIO drivers"
+ help
+ Say yes here to build support for ST sensors to use
+ common core functions.
+
+config ST_SENSORS_I2C
+ tristate "I2C common library for ST Sensor IIO drivers"
+ help
+ Say yes here to build support for ST sensors to use
+ common i2c functions.
+
+config ST_SENSORS_SPI
+ tristate "SPI common library for ST Sensor IIO drivers"
+ help
+ Say yes here to build support for ST sensors to use
+ common spi functions.
+
+config ST_SENSORS_TRIGGERED_BUFFER
+ tristate "trigger and buffer common library for ST Sensor IIO drivers"
+ help
+ Say yes here to build support for ST sensors to use
+ common trigger and buffer functions.
+
+endmenu
diff --git a/drivers/iio/common/st_sensors/Makefile b/drivers/iio/common/st_sensors/Makefile
new file mode 100644
index 0000000..a191e65
--- /dev/null
+++ b/drivers/iio/common/st_sensors/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the STMicroelectronics sensor common modules.
+#
+
+obj-$(CONFIG_ST_SENSORS_CORE) += st_sensors_core.o
+obj-$(CONFIG_ST_SENSORS_I2C) += st_sensors_i2c.o
+obj-$(CONFIG_ST_SENSORS_SPI) += st_sensors_spi.o
+obj-$(CONFIG_ST_SENSORS_TRIGGERED_BUFFER) += st_sensors_triggered_buffer.o
+st_sensors_triggered_buffer-y := st_sensors_trigger.o st_sensors_buffer.o
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
new file mode 100644
index 0000000..b636751
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -0,0 +1,115 @@
+/*
+ * STMicroelectronics sensors buffer library driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/interrupt.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/irqreturn.h>
+
+#include <linux/iio/common/st_sensors.h>
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
+{
+ int i, n = 0, len;
+ u8 addr[ST_SENSORS_NUMBER_DATA_CHANNELS];
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++) {
+ if (test_bit(i, indio_dev->active_scan_mask)) {
+ addr[n] = indio_dev->channels[i].address;
+ n++;
+ }
+ }
+ switch (n) {
+ case 1:
+ len = sdata->tf.read_multiple_byte(&sdata->tf, sdata->dev,
+ addr[0], ST_SENSORS_BYTE_FOR_CHANNEL, buf,
+ sdata->multiread_bit);
+ break;
+ case 2:
+ if ((addr[1] - addr[0]) == ST_SENSORS_BYTE_FOR_CHANNEL) {
+ len = sdata->tf.read_multiple_byte(&sdata->tf,
+ sdata->dev, addr[0],
+ ST_SENSORS_BYTE_FOR_CHANNEL*n,
+ buf, sdata->multiread_bit);
+ } else {
+ u8 rx_array[ST_SENSORS_BYTE_FOR_CHANNEL*
+ ST_SENSORS_NUMBER_DATA_CHANNELS];
+ len = sdata->tf.read_multiple_byte(&sdata->tf,
+ sdata->dev, addr[0],
+ ST_SENSORS_BYTE_FOR_CHANNEL*
+ ST_SENSORS_NUMBER_DATA_CHANNELS,
+ rx_array, sdata->multiread_bit);
+ if (len < 0)
+ goto read_data_channels_error;
+
+ for (i = 0; i < n * ST_SENSORS_NUMBER_DATA_CHANNELS;
+ i++) {
+ if (i < n)
+ buf[i] = rx_array[i];
+ else
+ buf[i] = rx_array[n + i];
+ }
+ len = ST_SENSORS_BYTE_FOR_CHANNEL*n;
+ }
+ break;
+ case 3:
+ len = sdata->tf.read_multiple_byte(&sdata->tf, sdata->dev,
+ addr[0], ST_SENSORS_BYTE_FOR_CHANNEL*
+ ST_SENSORS_NUMBER_DATA_CHANNELS,
+ buf, sdata->multiread_bit);
+ break;
+ default:
+ len = -EINVAL;
+ goto read_data_channels_error;
+ }
+ if (len != ST_SENSORS_BYTE_FOR_CHANNEL*n) {
+ len = -EIO;
+ goto read_data_channels_error;
+ }
+
+read_data_channels_error:
+ return len;
+}
+EXPORT_SYMBOL(st_sensors_get_buffer_element);
+
+irqreturn_t st_sensors_trigger_handler(int irq, void *p)
+{
+ int len;
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data);
+ if (len < 0)
+ goto st_sensors_get_buffer_element_error;
+
+ if (indio_dev->scan_timestamp)
+ *(s64 *)((u8 *)sdata->buffer_data +
+ ALIGN(len, sizeof(s64))) = pf->timestamp;
+
+ iio_push_to_buffers(indio_dev, sdata->buffer_data);
+
+st_sensors_get_buffer_element_error:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(st_sensors_trigger_handler);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
new file mode 100644
index 0000000..2b00ed7
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -0,0 +1,335 @@
+/*
+ * STMicroelectronics sensors core library driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+
+
+#define ST_SENSORS_WAI_ADDRESS 0x0f
+
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, u8 reg_addr,
+ u8 mask, short num_bit, u8 data)
+{
+ int err;
+ u8 new_data;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ err = sdata->tf.read_byte(&sdata->tf, sdata->dev, reg_addr, &new_data);
+ if (err < 0)
+ goto st_sensors_write_data_with_mask_error;
+
+ new_data = ((new_data & (~mask)) | ((data << __ffs(mask)) & mask));
+ err = sdata->tf.write_byte(&sdata->tf, sdata->dev, reg_addr, new_data);
+
+st_sensors_write_data_with_mask_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_write_data_with_mask);
+
+int st_sensors_get_sampling_frequency_avl(struct iio_dev *indio_dev,
+ const struct st_sensor_odr_avl *odr_avl, char *buf)
+{
+ int i, len = 0;
+
+ mutex_lock(&indio_dev->mlock);
+ for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
+ if (odr_avl[i].hz == 0)
+ break;
+
+ len += sprintf(buf + len, "%d ", odr_avl[i].hz);
+ }
+ mutex_unlock(&indio_dev->mlock);
+ buf[len - 1] = '\n';
+
+ return len;
+}
+EXPORT_SYMBOL(st_sensors_get_sampling_frequency_avl);
+
+int st_sensors_get_fullscale_avl(struct iio_dev *indio_dev,
+ const struct st_sensor_fullscale_avl *fullscale_avl, char *buf)
+{
+ int i, len = 0;
+
+ mutex_lock(&indio_dev->mlock);
+ for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
+ if (fullscale_avl[i].num == 0)
+ break;
+
+ len += sprintf(buf + len, "0.%06u ", fullscale_avl[i].gain);
+ }
+ mutex_unlock(&indio_dev->mlock);
+ buf[len - 1] = '\n';
+
+ return len;
+}
+EXPORT_SYMBOL(st_sensors_get_fullscale_avl);
+
+static int st_sensors_match_odr(const struct st_sensors *sensor,
+ unsigned int odr, struct st_sensor_odr_avl *odr_out)
+{
+ int i, ret = -EINVAL;
+
+ for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
+ if ((sensor->odr.odr_avl[i].hz == odr) &&
+ (sensor->odr.odr_avl[i].hz != 0)) {
+ odr_out->hz = sensor->odr.odr_avl[i].hz;
+ odr_out->value = sensor->odr.odr_avl[i].value;
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+int st_sensors_set_odr(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, unsigned int odr)
+{
+ int err;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ struct st_sensor_odr_avl odr_out;
+
+ err = st_sensors_match_odr(sensor, odr, &odr_out);
+ if (err < 0)
+ goto st_sensors_match_odr_error;
+
+ if ((sensor->odr.addr == sensor->pw.addr) &&
+ (sensor->odr.mask == sensor->pw.mask)) {
+ if (sdata->enabled == true) {
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->odr.addr, sensor->odr.mask,
+ sensor->odr.num_bit,
+ odr_out.value);
+ } else {
+ err = 0;
+ }
+ } else {
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->odr.addr, sensor->odr.mask,
+ sensor->odr.num_bit, odr_out.value);
+ }
+ if (err >= 0)
+ sdata->odr = odr_out.hz;
+
+st_sensors_match_odr_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_set_odr);
+
+static int st_sensors_match_fs(const struct st_sensors *sensor,
+ unsigned int fs, struct st_sensor_fullscale_avl *fs_out)
+{
+ int i, ret = -EINVAL;
+
+ for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
+ if ((sensor->fs.fs_avl[i].num == fs) &&
+ (sensor->fs.fs_avl[i].num != 0)) {
+ fs_out->num = sensor->fs.fs_avl[i].num;
+ fs_out->gain = sensor->fs.fs_avl[i].gain;
+ fs_out->value = sensor->fs.fs_avl[i].value;
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+int st_sensors_set_fullscale(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, unsigned int fs)
+{
+ int err;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ struct st_sensor_fullscale_avl fs_out;
+
+ err = st_sensors_match_fs(sensor, fs, &fs_out);
+ if (err < 0)
+ goto st_accel_set_fullscale_error;
+
+ err = st_sensors_write_data_with_mask(indio_dev, sensor->fs.addr,
+ sensor->fs.mask, sensor->fs.num_bit, sensor->fs.fs_avl->value);
+ if (err < 0)
+ goto st_accel_set_fullscale_error;
+
+ sdata->fullscale = sensor->fs.fs_avl->num;
+ sdata->gain = sensor->fs.fs_avl->gain;
+ sdata->gain2 = sensor->fs.fs_avl->gain2;
+ return err;
+
+st_accel_set_fullscale_error:
+ dev_err(&indio_dev->dev, "failed to set new fullscale.\n");
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_set_fullscale);
+
+int st_sensors_set_enable(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, bool enable)
+{
+ int err = -EINVAL;
+ bool found;
+ u8 tmp_value;
+ struct st_sensor_odr_avl odr_out;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ if (enable) {
+ found = false;
+ tmp_value = sensor->pw.value_on;
+ if ((sensor->odr.addr == sensor->pw.addr) &&
+ (sensor->odr.mask == sensor->pw.mask)) {
+ err = st_sensors_match_odr(sensor,
+ sdata->odr, &odr_out);
+ if (err < 0)
+ goto set_enable_error;
+ tmp_value = odr_out.value;
+ found = true;
+ }
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->pw.addr, sensor->pw.mask,
+ sensor->pw.num_bit, tmp_value);
+ if (err < 0)
+ goto set_enable_error;
+ sdata->enabled = true;
+ if (found)
+ sdata->odr = odr_out.hz;
+ } else {
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->pw.addr, sensor->pw.mask,
+ sensor->pw.num_bit, sensor->pw.value_off);
+ if (err < 0)
+ goto set_enable_error;
+ sdata->enabled = false;
+ }
+
+set_enable_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_set_enable);
+
+int st_sensors_set_axis_enable(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, u8 axis_enable)
+{
+ return st_sensors_write_data_with_mask(indio_dev,
+ sensor->enable_axis.addr, sensor->enable_axis.mask,
+ 3, axis_enable);
+}
+EXPORT_SYMBOL(st_sensors_set_axis_enable);
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor)
+{
+ int err;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ err = st_sensors_set_enable(indio_dev, sensor, false);
+ if (err < 0)
+ goto init_error;
+
+ err = st_sensors_set_fullscale(indio_dev, sensor, sdata->fullscale);
+ if (err < 0)
+ goto init_error;
+
+ err = st_sensors_set_odr(indio_dev, sensor, sdata->odr);
+ if (err < 0)
+ goto init_error;
+
+ /* set BDU */
+ err = st_sensors_write_data_with_mask(indio_dev, sensor->bdu.addr,
+ sensor->bdu.mask, 1, true);
+ if (err < 0)
+ goto init_error;
+
+ err = st_sensors_set_axis_enable(indio_dev, sensor,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+
+init_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_init_sensor);
+
+int st_sensors_set_dataready_irq(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, bool enable)
+{
+ int err;
+
+ if (sensor->drdy_irq.ig1.en_addr > 0) {
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->drdy_irq.ig1.en_addr,
+ sensor->drdy_irq.ig1.en_mask, 1, (int)enable);
+ if (err < 0)
+ goto st_accel_set_dataready_irq_error;
+ }
+
+ if (sensor->drdy_irq.ig1.latch_mask_addr > 0) {
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->drdy_irq.ig1.latch_mask_addr,
+ sensor->drdy_irq.ig1.latching_mask, 1,
+ (int)enable);
+ if (err < 0)
+ goto st_accel_set_dataready_irq_error;
+ }
+
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sensor->drdy_irq.addr,
+ sensor->drdy_irq.mask, 1, (int)enable);
+
+st_accel_set_dataready_irq_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_set_dataready_irq);
+
+int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, int scale)
+{
+ int err = -EINVAL, i;
+
+ for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
+ if ((sensor->fs.fs_avl[i].gain == scale) &&
+ (sensor->fs.fs_avl[i].gain != 0)) {
+ err = 0;
+ break;
+ }
+ }
+ if (err < 0)
+ goto st_sensors_match_scale_error;
+
+ err = st_sensors_set_fullscale(indio_dev,
+ sensor, sensor->fs.fs_avl[i].num);
+
+st_sensors_match_scale_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain);
+
+int st_sensors_read_axis_data(struct iio_dev *indio_dev, u8 ch_addr, int *data)
+{
+ int err;
+ u8 outdata[ST_SENSORS_BYTE_FOR_CHANNEL];
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ err = sdata->tf.read_multiple_byte(&sdata->tf, sdata->dev,
+ ch_addr, ST_SENSORS_BYTE_FOR_CHANNEL,
+ outdata, sdata->multiread_bit);
+ if (err < 0)
+ goto read_error;
+
+ *data = ((s16)le16_to_cpup((u16 *)outdata));
+
+read_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_read_axis_data);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
new file mode 100644
index 0000000..fa4bc7d
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -0,0 +1,78 @@
+/*
+ * STMicroelectronics sensors i2c library driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+
+
+#define ST_SENSORS_I2C_MULTIREAD 0x80
+
+unsigned int st_sensors_i2c_get_irq(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ struct i2c_client *client = to_i2c_client(sdata->dev);
+
+ return client->irq;
+}
+
+static int st_sensors_i2c_read_byte(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, u8 *res_byte)
+{
+ int err;
+
+ err = i2c_smbus_read_byte_data(to_i2c_client(dev), reg_addr);
+ if (err < 0)
+ goto st_accel_i2c_read_byte_error;
+
+ *res_byte = err & 0xff;
+
+st_accel_i2c_read_byte_error:
+ return err < 0 ? err : 0;
+}
+
+static int st_sensors_i2c_read_multiple_byte(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
+{
+ if (multiread_bit == true)
+ reg_addr |= ST_SENSORS_I2C_MULTIREAD;
+
+ return i2c_smbus_read_i2c_block_data(to_i2c_client(dev),
+ reg_addr, len, data);
+}
+
+static int st_sensors_i2c_write_byte(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, u8 data)
+{
+ return i2c_smbus_write_byte_data(to_i2c_client(dev), reg_addr, data);
+}
+
+void st_sensors_i2c_configure(struct iio_dev *indio_dev,
+ struct i2c_client *client, struct st_sensor_data *sdata)
+{
+ i2c_set_clientdata(client, indio_dev);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = client->name;
+
+ mutex_init(&sdata->tf.buf_lock);
+ sdata->tf.read_byte = st_sensors_i2c_read_byte;
+ sdata->tf.write_byte = st_sensors_i2c_write_byte;
+ sdata->tf.read_multiple_byte = st_sensors_i2c_read_multiple_byte;
+ sdata->get_irq_data_ready = st_sensors_i2c_get_irq;
+}
+EXPORT_SYMBOL(st_sensors_i2c_configure);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
new file mode 100644
index 0000000..82fa633
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -0,0 +1,124 @@
+/*
+ * STMicroelectronics sensors spi library driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+
+
+#define ST_SENSORS_SPI_MULTIREAD 0xc0
+#define ST_SENSORS_SPI_READ 0x80
+
+unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ struct spi_device *spi = to_spi_device(sdata->dev);
+
+ return spi->irq;
+}
+
+static int st_sensors_spi_read(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
+{
+ struct spi_message msg;
+ int err;
+
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = st->tx_buf,
+ .bits_per_word = 8,
+ .len = 1,
+ },
+ {
+ .rx_buf = st->rx_buf,
+ .bits_per_word = 8,
+ .len = len,
+ }
+ };
+
+ mutex_lock(&st->buf_lock);
+ if ((multiread_bit == true) && (len > 1))
+ st->tx_buf[0] = reg_addr | ST_SENSORS_SPI_MULTIREAD;
+ else
+ st->tx_buf[0] = reg_addr | ST_SENSORS_SPI_READ;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ err = spi_sync(to_spi_device(dev), &msg);
+ if (err)
+ goto acc_spi_read_error;
+
+ memcpy(data, st->rx_buf, len*sizeof(u8));
+ mutex_unlock(&st->buf_lock);
+ return len;
+
+acc_spi_read_error:
+ return err;
+}
+
+static int st_sensors_spi_read_byte(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, u8 *res_byte)
+{
+ return st_sensors_spi_read(st, dev, reg_addr, 1, res_byte, false);
+}
+
+static int st_sensors_spi_read_multiple_byte(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
+{
+ return st_sensors_spi_read(st, dev, reg_addr, len, data, multiread_bit);
+}
+
+static int st_sensors_spi_write_byte(struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, u8 data)
+{
+ struct spi_message msg;
+ int err;
+
+ struct spi_transfer xfers = {
+ .tx_buf = st->tx_buf,
+ .bits_per_word = 8,
+ .len = 2,
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx_buf[0] = reg_addr;
+ st->tx_buf[1] = data;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers, &msg);
+ err = spi_sync(to_spi_device(dev), &msg);
+ mutex_unlock(&st->buf_lock);
+
+ return err;
+}
+
+void st_sensors_spi_configure(struct iio_dev *indio_dev,
+ struct spi_device *spi, struct st_sensor_data *sdata)
+{
+ spi_set_drvdata(spi, indio_dev);
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi->modalias;
+
+ mutex_init(&sdata->tf.buf_lock);
+ sdata->tf.read_byte = st_sensors_spi_read_byte;
+ sdata->tf.write_byte = st_sensors_spi_write_byte;
+ sdata->tf.read_multiple_byte = st_sensors_spi_read_multiple_byte;
+ sdata->get_irq_data_ready = st_sensors_spi_get_irq;
+}
+EXPORT_SYMBOL(st_sensors_spi_configure);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
new file mode 100644
index 0000000..6d43b13
--- /dev/null
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -0,0 +1,76 @@
+/*
+ * STMicroelectronics sensors trigger library driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/common/st_sensors.h>
+
+int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+ const struct iio_trigger_ops *trig_ops)
+{
+ int err;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
+ if (sdata->trig == NULL) {
+ err = -ENOMEM;
+ dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
+ goto iio_trigger_alloc_error;
+ }
+
+ err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
+ iio_trigger_generic_data_rdy_poll,
+ NULL,
+ IRQF_TRIGGER_RISING,
+ sdata->trig->name,
+ sdata->trig);
+ if (err)
+ goto request_irq_error;
+
+ sdata->trig->private_data = indio_dev;
+ sdata->trig->ops = trig_ops;
+ sdata->trig->dev.parent = sdata->dev;
+
+ err = iio_trigger_register(sdata->trig);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
+ goto iio_trigger_register_error;
+ }
+ indio_dev->trig = sdata->trig;
+
+ return 0;
+
+iio_trigger_register_error:
+ free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
+request_irq_error:
+ iio_trigger_free(sdata->trig);
+iio_trigger_alloc_error:
+ return err;
+}
+EXPORT_SYMBOL(st_sensors_allocate_trigger);
+
+void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ iio_trigger_unregister(sdata->trig);
+ free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
+ iio_trigger_free(sdata->trig);
+}
+EXPORT_SYMBOL(st_sensors_deallocate_trigger);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
new file mode 100644
index 0000000..c0f2acc
--- /dev/null
+++ b/include/linux/iio/common/st_sensors.h
@@ -0,0 +1,246 @@
+/*
+ * STMicroelectronics sensors library driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_H
+#define ST_SENSORS_H
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/irqreturn.h>
+#include <linux/iio/trigger.h>
+
+
+#define ST_SENSORS_TX_MAX_LENGHT 2
+#define ST_SENSORS_RX_MAX_LENGHT 6
+
+#define ST_SENSORS_ODR_LIST_MAX 10
+#define ST_SENSORS_FULLSCALE_AVL_MAX 10
+
+#define ST_SENSORS_NUMBER_ALL_CHANNELS 4
+#define ST_SENSORS_NUMBER_DATA_CHANNELS 3
+#define ST_SENSORS_ENABLE_ALL_CHANNELS 0x07
+#define ST_SENSORS_BYTE_FOR_CHANNEL 2
+#define ST_SENSORS_SCAN_X 0
+#define ST_SENSORS_SCAN_Y 1
+#define ST_SENSORS_SCAN_Z 2
+#define ST_SENSORS_DEFAULT_12_REALBITS 12
+#define ST_SENSORS_DEFAULT_16_REALBITS 16
+#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01
+#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00
+#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f
+#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20
+#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07
+#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3
+
+#define ST_SENSORS_LSM_CHANNELS(device_type, index, mod, endian, bits, addr) \
+{ \
+ .type = device_type, \
+ .modified = 1, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+ .scan_index = index, \
+ .channel2 = mod, \
+ .address = addr, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = bits, \
+ .shift = 16 - bits, \
+ .storagebits = 16, \
+ .endianness = endian, \
+ }, \
+}
+
+struct st_sensor_odr_avl {
+ unsigned int hz;
+ u8 value;
+};
+
+struct st_sensor_odr {
+ u8 addr;
+ u8 mask;
+ short num_bit;
+ struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
+};
+
+struct st_sensor_power {
+ u8 addr;
+ u8 mask;
+ unsigned short num_bit;
+ u8 value_off;
+ u8 value_on;
+};
+
+struct st_sensor_axis {
+ u8 addr;
+ u8 mask;
+};
+
+struct st_sensor_fullscale_avl {
+ unsigned int num;
+ u8 value;
+ unsigned int gain;
+ unsigned int gain2;
+};
+
+struct st_sensor_fullscale {
+ u8 addr;
+ u8 mask;
+ unsigned short num_bit;
+ struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
+};
+
+struct st_sensor_bdu {
+ u8 addr;
+ u8 mask;
+};
+
+struct st_sensor_interrupt_generator {
+ u8 en_addr;
+ u8 latch_mask_addr;
+ u8 en_mask;
+ u8 latching_mask;
+};
+
+struct st_sensor_data_ready_irq {
+ u8 addr;
+ u8 mask;
+ struct st_sensor_interrupt_generator ig1;
+};
+
+/**
+ * struct st_sensor_transfer - ST sensor device I/O struct
+ * @buf_lock: Mutex to protect rx and tx buffers.
+ * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
+ * This buffer is used to avoid DMA not-aligned issue.
+ * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
+ * This buffer is used to avoid DMA not-aligned issue.
+ * @read_byte: Function used to read one byte.
+ * @write_byte: Function used to write one byte.
+ * @read_multiple_byte: Function used to read multiple byte.
+ */
+struct st_sensor_transfer {
+ struct mutex buf_lock;
+ u8 tx_buf[ST_SENSORS_TX_MAX_LENGHT] ____cacheline_aligned;
+ u8 rx_buf[ST_SENSORS_RX_MAX_LENGHT] ____cacheline_aligned;
+ int (*read_byte) (struct st_sensor_transfer *st, struct device *dev,
+ u8 reg_addr, u8 *res_byte);
+ int (*write_byte) (struct st_sensor_transfer *st, struct device *dev,
+ u8 reg_addr, u8 data);
+ int (*read_multiple_byte) (struct st_sensor_transfer *st,
+ struct device *dev, u8 reg_addr, int len, u8 *data,
+ bool multiread_bit);
+};
+
+/**
+ * struct st_sensor_data - ST sensor device status
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @trig: The trigger in use by the core driver.
+ * @enabled: Status of the sensor (false->off, true->on).
+ * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
+ * @index: Number used to point the sensor being used in the st_sensors struct.
+ * @buffer_data: Data used by buffer part.
+ * @fullscale: Maximum range of measure by the sensor.
+ * @gain: Sensitivity of the sensor [m/s^2/LSB].
+ * @odr: Output data rate of the sensor [Hz].
+ * @tf: Transfer function structure used by I/O operations.
+ */
+struct st_sensor_data {
+ struct device *dev;
+ struct iio_trigger *trig;
+
+ bool enabled;
+ bool multiread_bit;
+
+ short index;
+
+ char *buffer_data;
+
+ unsigned int fullscale;
+ unsigned int gain;
+ unsigned int gain2;
+ unsigned int odr;
+
+ struct st_sensor_transfer tf;
+
+ unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
+};
+
+/**
+ * struct st_sensors - ST sensors list
+ * @wai: Contents of WhoAmI register.
+ * @ch: IIO channels for the sensor.
+ * @odr: Output data rate register and odr list available.
+ * @pw: Power register of the sensor.
+ * @enable_axis: Enable one or more axis of the sensor.
+ * @fs: Full scale register and fs list available.
+ * @bdu: Block data update register.
+ * @drdy_irq: Data ready register of the sensor.
+ * @multi_read_bit: Use or not particular bit for [I2C/SPI] multiread.
+ */
+struct st_sensors {
+ u8 wai;
+ struct iio_chan_spec *ch;
+ struct st_sensor_odr odr;
+ struct st_sensor_power pw;
+ struct st_sensor_axis enable_axis;
+ struct st_sensor_fullscale fs;
+ struct st_sensor_bdu bdu;
+ struct st_sensor_data_ready_irq drdy_irq;
+ bool multi_read_bit;
+};
+
+void st_sensors_spi_configure(struct iio_dev *indio_dev,
+ struct spi_device *spi, struct st_sensor_data *sdata);
+
+void st_sensors_i2c_configure(struct iio_dev *indio_dev,
+ struct i2c_client *client, struct st_sensor_data *sdata);
+
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, u8 reg_addr,
+ u8 mask, short num_bit, u8 data);
+
+int st_sensors_get_sampling_frequency_avl(struct iio_dev *indio_dev,
+ const struct st_sensor_odr_avl *odr_avl, char *buf);
+
+int st_sensors_get_fullscale_avl(struct iio_dev *indio_dev,
+ const struct st_sensor_fullscale_avl *fullscale_avl, char *buf);
+
+int st_sensors_set_odr(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, unsigned int odr);
+
+int st_sensors_set_fullscale(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, unsigned int fs);
+
+int st_sensors_set_enable(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, bool enable);
+
+int st_sensors_set_axis_enable(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, u8 axis_enable);
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor);
+
+int st_sensors_set_dataready_irq(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, bool enable);
+
+int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev,
+ const struct st_sensors *sensor, int scale);
+
+int st_sensors_read_axis_data(struct iio_dev *indio_dev, u8 ch_addr, int *data);
+
+int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+ const struct iio_trigger_ops *trig_ops);
+
+void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+#endif /* ST_SENSORS_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 1/4] iio:common: Add STMicroelectronics common library
2012-12-13 13:11 ` [PATCH 1/4] iio:common: Add STMicroelectronics common library Denis CIOCCA
@ 2012-12-16 12:15 ` Jonathan Cameron
0 siblings, 0 replies; 15+ messages in thread
From: Jonathan Cameron @ 2012-12-16 12:15 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: lars, linux-iio
On 12/13/2012 01:11 PM, Denis CIOCCA wrote:
> This patch add generic library for STMicroelectronics 3-axis sensors.
Nice piece of work. Couple of little bits and bobs, but basically there
as far as I am concerned...
(just the spi buffer alignment stuff and it really is just a case of
making sure they are the last element in the chunk of memory created
as mallocs are always a whole number of cachelines.)
> ---
> drivers/iio/common/Kconfig | 1 +
> drivers/iio/common/Makefile | 1 +
> drivers/iio/common/st_sensors/Kconfig | 30 ++
> drivers/iio/common/st_sensors/Makefile | 9 +
> drivers/iio/common/st_sensors/st_sensors_buffer.c | 115 +++++++
> drivers/iio/common/st_sensors/st_sensors_core.c | 335 ++++++++++++++++++++
> drivers/iio/common/st_sensors/st_sensors_i2c.c | 78 +++++
> drivers/iio/common/st_sensors/st_sensors_spi.c | 124 +++++++
> drivers/iio/common/st_sensors/st_sensors_trigger.c | 76 +++++
> include/linux/iio/common/st_sensors.h | 246 ++++++++++++++
> 10 files changed, 1015 insertions(+), 0 deletions(-)
> create mode 100644 drivers/iio/common/st_sensors/Kconfig
> create mode 100644 drivers/iio/common/st_sensors/Makefile
> create mode 100644 drivers/iio/common/st_sensors/st_sensors_buffer.c
> create mode 100644 drivers/iio/common/st_sensors/st_sensors_core.c
> create mode 100644 drivers/iio/common/st_sensors/st_sensors_i2c.c
> create mode 100644 drivers/iio/common/st_sensors/st_sensors_spi.c
> create mode 100644 drivers/iio/common/st_sensors/st_sensors_trigger.c
> create mode 100644 include/linux/iio/common/st_sensors.h
>
> diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
> index ed45ee5..0b6e97d 100644
> --- a/drivers/iio/common/Kconfig
> +++ b/drivers/iio/common/Kconfig
> @@ -3,3 +3,4 @@
> #
>
> source "drivers/iio/common/hid-sensors/Kconfig"
> +source "drivers/iio/common/st_sensors/Kconfig"
> diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
> index 8158400..c2352be 100644
> --- a/drivers/iio/common/Makefile
> +++ b/drivers/iio/common/Makefile
> @@ -7,3 +7,4 @@
> #
>
> obj-y += hid-sensors/
> +obj-y += st_sensors/
> diff --git a/drivers/iio/common/st_sensors/Kconfig b/drivers/iio/common/st_sensors/Kconfig
> new file mode 100644
> index 0000000..ddcfcc6
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/Kconfig
> @@ -0,0 +1,30 @@
> +#
> +# Hid Sensor common modules
> +#
> +menu "STMicroelectronics sensors library"
> +
> +config ST_SENSORS_CORE
> + tristate "Common modules for all ST sensors IIO drivers"
> + help
> + Say yes here to build support for ST sensors to use
> + common core functions.
> +
> +config ST_SENSORS_I2C
> + tristate "I2C common library for ST Sensor IIO drivers"
> + help
> + Say yes here to build support for ST sensors to use
> + common i2c functions.
> +
> +config ST_SENSORS_SPI
> + tristate "SPI common library for ST Sensor IIO drivers"
> + help
> + Say yes here to build support for ST sensors to use
> + common spi functions.
> +
> +config ST_SENSORS_TRIGGERED_BUFFER
> + tristate "trigger and buffer common library for ST Sensor IIO drivers"
> + help
> + Say yes here to build support for ST sensors to use
> + common trigger and buffer functions.
> +
> +endmenu
> diff --git a/drivers/iio/common/st_sensors/Makefile b/drivers/iio/common/st_sensors/Makefile
> new file mode 100644
> index 0000000..a191e65
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/Makefile
> @@ -0,0 +1,9 @@
> +#
> +# Makefile for the STMicroelectronics sensor common modules.
> +#
> +
> +obj-$(CONFIG_ST_SENSORS_CORE) += st_sensors_core.o
> +obj-$(CONFIG_ST_SENSORS_I2C) += st_sensors_i2c.o
> +obj-$(CONFIG_ST_SENSORS_SPI) += st_sensors_spi.o
> +obj-$(CONFIG_ST_SENSORS_TRIGGERED_BUFFER) += st_sensors_triggered_buffer.o
> +st_sensors_triggered_buffer-y := st_sensors_trigger.o st_sensors_buffer.o
> diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
> new file mode 100644
> index 0000000..b636751
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
> @@ -0,0 +1,115 @@
> +/*
> + * STMicroelectronics sensors buffer library driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/interrupt.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/irqreturn.h>
> +
> +#include <linux/iio/common/st_sensors.h>
> +
> +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
> +{
> + int i, n = 0, len;
> + u8 addr[ST_SENSORS_NUMBER_DATA_CHANNELS];
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++) {
> + if (test_bit(i, indio_dev->active_scan_mask)) {
> + addr[n] = indio_dev->channels[i].address;
> + n++;
> + }
> + }
> + switch (n) {
> + case 1:
> + len = sdata->tf.read_multiple_byte(&sdata->tf, sdata->dev,
> + addr[0], ST_SENSORS_BYTE_FOR_CHANNEL, buf,
> + sdata->multiread_bit);
> + break;
> + case 2:
> + if ((addr[1] - addr[0]) == ST_SENSORS_BYTE_FOR_CHANNEL) {
> + len = sdata->tf.read_multiple_byte(&sdata->tf,
> + sdata->dev, addr[0],
> + ST_SENSORS_BYTE_FOR_CHANNEL*n,
> + buf, sdata->multiread_bit);
> + } else {
> + u8 rx_array[ST_SENSORS_BYTE_FOR_CHANNEL*
> + ST_SENSORS_NUMBER_DATA_CHANNELS];
> + len = sdata->tf.read_multiple_byte(&sdata->tf,
> + sdata->dev, addr[0],
> + ST_SENSORS_BYTE_FOR_CHANNEL*
> + ST_SENSORS_NUMBER_DATA_CHANNELS,
> + rx_array, sdata->multiread_bit);
> + if (len < 0)
> + goto read_data_channels_error;
> +
> + for (i = 0; i < n * ST_SENSORS_NUMBER_DATA_CHANNELS;
> + i++) {
> + if (i < n)
> + buf[i] = rx_array[i];
> + else
> + buf[i] = rx_array[n + i];
> + }
> + len = ST_SENSORS_BYTE_FOR_CHANNEL*n;
> + }
> + break;
> + case 3:
> + len = sdata->tf.read_multiple_byte(&sdata->tf, sdata->dev,
> + addr[0], ST_SENSORS_BYTE_FOR_CHANNEL*
> + ST_SENSORS_NUMBER_DATA_CHANNELS,
> + buf, sdata->multiread_bit);
> + break;
> + default:
> + len = -EINVAL;
> + goto read_data_channels_error;
> + }
> + if (len != ST_SENSORS_BYTE_FOR_CHANNEL*n) {
> + len = -EIO;
> + goto read_data_channels_error;
> + }
> +
> +read_data_channels_error:
> + return len;
> +}
> +EXPORT_SYMBOL(st_sensors_get_buffer_element);
> +
> +irqreturn_t st_sensors_trigger_handler(int irq, void *p)
> +{
> + int len;
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data);
> + if (len < 0)
> + goto st_sensors_get_buffer_element_error;
> +
> + if (indio_dev->scan_timestamp)
> + *(s64 *)((u8 *)sdata->buffer_data +
> + ALIGN(len, sizeof(s64))) = pf->timestamp;
> +
> + iio_push_to_buffers(indio_dev, sdata->buffer_data);
> +
> +st_sensors_get_buffer_element_error:
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +EXPORT_SYMBOL(st_sensors_trigger_handler);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics ST-sensors buffer");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> new file mode 100644
> index 0000000..2b00ed7
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -0,0 +1,335 @@
> +/*
> + * STMicroelectronics sensors core library driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/iio/iio.h>
> +
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +#define ST_SENSORS_WAI_ADDRESS 0x0f
> +
> +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, u8 reg_addr,
> + u8 mask, short num_bit, u8 data)
> +{
> + int err;
> + u8 new_data;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + err = sdata->tf.read_byte(&sdata->tf, sdata->dev, reg_addr, &new_data);
> + if (err < 0)
> + goto st_sensors_write_data_with_mask_error;
> +
> + new_data = ((new_data & (~mask)) | ((data << __ffs(mask)) & mask));
> + err = sdata->tf.write_byte(&sdata->tf, sdata->dev, reg_addr, new_data);
> +
> +st_sensors_write_data_with_mask_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_write_data_with_mask);
> +
> +int st_sensors_get_sampling_frequency_avl(struct iio_dev *indio_dev,
> + const struct st_sensor_odr_avl *odr_avl, char *buf)
> +{
> + int i, len = 0;
> +
> + mutex_lock(&indio_dev->mlock);
> + for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
> + if (odr_avl[i].hz == 0)
> + break;
> +
> + len += sprintf(buf + len, "%d ", odr_avl[i].hz);
> + }
> + mutex_unlock(&indio_dev->mlock);
> + buf[len - 1] = '\n';
> +
> + return len;
> +}
> +EXPORT_SYMBOL(st_sensors_get_sampling_frequency_avl);
> +
> +int st_sensors_get_fullscale_avl(struct iio_dev *indio_dev,
> + const struct st_sensor_fullscale_avl *fullscale_avl, char *buf)
> +{
> + int i, len = 0;
> +
> + mutex_lock(&indio_dev->mlock);
> + for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
> + if (fullscale_avl[i].num == 0)
> + break;
> +
> + len += sprintf(buf + len, "0.%06u ", fullscale_avl[i].gain);
> + }
> + mutex_unlock(&indio_dev->mlock);
> + buf[len - 1] = '\n';
> +
> + return len;
> +}
> +EXPORT_SYMBOL(st_sensors_get_fullscale_avl);
> +
> +static int st_sensors_match_odr(const struct st_sensors *sensor,
> + unsigned int odr, struct st_sensor_odr_avl *odr_out)
> +{
> + int i, ret = -EINVAL;
> +
> + for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
> + if ((sensor->odr.odr_avl[i].hz == odr) &&
> + (sensor->odr.odr_avl[i].hz != 0)) {
> + odr_out->hz = sensor->odr.odr_avl[i].hz;
> + odr_out->value = sensor->odr.odr_avl[i].value;
> + ret = 0;
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +int st_sensors_set_odr(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, unsigned int odr)
> +{
> + int err;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> + struct st_sensor_odr_avl odr_out;
> +
> + err = st_sensors_match_odr(sensor, odr, &odr_out);
> + if (err < 0)
> + goto st_sensors_match_odr_error;
> +
> + if ((sensor->odr.addr == sensor->pw.addr) &&
> + (sensor->odr.mask == sensor->pw.mask)) {
> + if (sdata->enabled == true) {
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->odr.addr, sensor->odr.mask,
> + sensor->odr.num_bit,
> + odr_out.value);
> + } else {
> + err = 0;
> + }
> + } else {
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->odr.addr, sensor->odr.mask,
> + sensor->odr.num_bit, odr_out.value);
> + }
> + if (err >= 0)
> + sdata->odr = odr_out.hz;
> +
> +st_sensors_match_odr_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_set_odr);
> +
> +static int st_sensors_match_fs(const struct st_sensors *sensor,
> + unsigned int fs, struct st_sensor_fullscale_avl *fs_out)
> +{
> + int i, ret = -EINVAL;
> +
> + for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
> + if ((sensor->fs.fs_avl[i].num == fs) &&
> + (sensor->fs.fs_avl[i].num != 0)) {
> + fs_out->num = sensor->fs.fs_avl[i].num;
> + fs_out->gain = sensor->fs.fs_avl[i].gain;
> + fs_out->value = sensor->fs.fs_avl[i].value;
why not
fs_out = &sensor->fs.fs_avl[i];
(obviously with the relevant changes to the call sites.)
> + ret = 0;
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +int st_sensors_set_fullscale(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, unsigned int fs)
> +{
> + int err;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> + struct st_sensor_fullscale_avl fs_out;
> +
> + err = st_sensors_match_fs(sensor, fs, &fs_out);
> + if (err < 0)
> + goto st_accel_set_fullscale_error;
> +
> + err = st_sensors_write_data_with_mask(indio_dev, sensor->fs.addr,
> + sensor->fs.mask, sensor->fs.num_bit, sensor->fs.fs_avl->value);
> + if (err < 0)
> + goto st_accel_set_fullscale_error;
> +
> + sdata->fullscale = sensor->fs.fs_avl->num;
> + sdata->gain = sensor->fs.fs_avl->gain;
> + sdata->gain2 = sensor->fs.fs_avl->gain2;
Is there any reason not to just have fs_avl in sdata
so have a struct st_sensor_fullscale_avl *fs_avl in sdata and
then just set the pointer here?
> + return err;
> +
> +st_accel_set_fullscale_error:
> + dev_err(&indio_dev->dev, "failed to set new fullscale.\n");
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_set_fullscale);
> +
> +int st_sensors_set_enable(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, bool enable)
> +{
> + int err = -EINVAL;
> + bool found;
> + u8 tmp_value;
> + struct st_sensor_odr_avl odr_out;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + if (enable) {
> + found = false;
> + tmp_value = sensor->pw.value_on;
> + if ((sensor->odr.addr == sensor->pw.addr) &&
> + (sensor->odr.mask == sensor->pw.mask)) {
> + err = st_sensors_match_odr(sensor,
> + sdata->odr, &odr_out);
> + if (err < 0)
> + goto set_enable_error;
> + tmp_value = odr_out.value;
> + found = true;
> + }
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->pw.addr, sensor->pw.mask,
> + sensor->pw.num_bit, tmp_value);
> + if (err < 0)
> + goto set_enable_error;
> + sdata->enabled = true;
> + if (found)
> + sdata->odr = odr_out.hz;
> + } else {
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->pw.addr, sensor->pw.mask,
> + sensor->pw.num_bit, sensor->pw.value_off);
> + if (err < 0)
> + goto set_enable_error;
> + sdata->enabled = false;
> + }
> +
> +set_enable_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_set_enable);
> +
> +int st_sensors_set_axis_enable(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, u8 axis_enable)
> +{
> + return st_sensors_write_data_with_mask(indio_dev,
> + sensor->enable_axis.addr, sensor->enable_axis.mask,
> + 3, axis_enable);
> +}
> +EXPORT_SYMBOL(st_sensors_set_axis_enable);
> +
> +int st_sensors_init_sensor(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor)
> +{
> + int err;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + err = st_sensors_set_enable(indio_dev, sensor, false);
> + if (err < 0)
> + goto init_error;
> +
> + err = st_sensors_set_fullscale(indio_dev, sensor, sdata->fullscale);
> + if (err < 0)
> + goto init_error;
> +
> + err = st_sensors_set_odr(indio_dev, sensor, sdata->odr);
> + if (err < 0)
> + goto init_error;
> +
> + /* set BDU */
> + err = st_sensors_write_data_with_mask(indio_dev, sensor->bdu.addr,
> + sensor->bdu.mask, 1, true);
> + if (err < 0)
> + goto init_error;
> +
> + err = st_sensors_set_axis_enable(indio_dev, sensor,
> + ST_SENSORS_ENABLE_ALL_CHANNELS);
> +
> +init_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_init_sensor);
> +
> +int st_sensors_set_dataready_irq(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, bool enable)
> +{
> + int err;
> +
I'd like to see some comments in here as the flow / naming is not entirely
obvious.
> + if (sensor->drdy_irq.ig1.en_addr > 0) {
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->drdy_irq.ig1.en_addr,
> + sensor->drdy_irq.ig1.en_mask, 1, (int)enable);
> + if (err < 0)
> + goto st_accel_set_dataready_irq_error;
> + }
> +
> + if (sensor->drdy_irq.ig1.latch_mask_addr > 0) {
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->drdy_irq.ig1.latch_mask_addr,
> + sensor->drdy_irq.ig1.latching_mask, 1,
> + (int)enable);
> + if (err < 0)
> + goto st_accel_set_dataready_irq_error;
> + }
> +
> + err = st_sensors_write_data_with_mask(indio_dev,
> + sensor->drdy_irq.addr,
> + sensor->drdy_irq.mask, 1, (int)enable);
> +
> +st_accel_set_dataready_irq_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_set_dataready_irq);
> +
> +int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, int scale)
> +{
> + int err = -EINVAL, i;
> +
> + for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
> + if ((sensor->fs.fs_avl[i].gain == scale) &&
> + (sensor->fs.fs_avl[i].gain != 0)) {
> + err = 0;
> + break;
> + }
> + }
> + if (err < 0)
> + goto st_sensors_match_scale_error;
> +
> + err = st_sensors_set_fullscale(indio_dev,
> + sensor, sensor->fs.fs_avl[i].num);
> +
> +st_sensors_match_scale_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain);
> +
> +int st_sensors_read_axis_data(struct iio_dev *indio_dev, u8 ch_addr, int *data)
> +{
> + int err;
> + u8 outdata[ST_SENSORS_BYTE_FOR_CHANNEL];
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + err = sdata->tf.read_multiple_byte(&sdata->tf, sdata->dev,
> + ch_addr, ST_SENSORS_BYTE_FOR_CHANNEL,
> + outdata, sdata->multiread_bit);
> + if (err < 0)
> + goto read_error;
> +
> + *data = ((s16)le16_to_cpup((u16 *)outdata));
> +
> +read_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_read_axis_data);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics ST-sensors core");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
> new file mode 100644
> index 0000000..fa4bc7d
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
> @@ -0,0 +1,78 @@
> +/*
> + * STMicroelectronics sensors i2c library driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/iio/iio.h>
> +
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +#define ST_SENSORS_I2C_MULTIREAD 0x80
> +
> +unsigned int st_sensors_i2c_get_irq(struct iio_dev *indio_dev)
> +{
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> + struct i2c_client *client = to_i2c_client(sdata->dev);
> +
> + return client->irq;
> +}
> +
> +static int st_sensors_i2c_read_byte(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, u8 *res_byte)
> +{
> + int err;
> +
> + err = i2c_smbus_read_byte_data(to_i2c_client(dev), reg_addr);
> + if (err < 0)
> + goto st_accel_i2c_read_byte_error;
> +
> + *res_byte = err & 0xff;
> +
> +st_accel_i2c_read_byte_error:
> + return err < 0 ? err : 0;
> +}
> +
> +static int st_sensors_i2c_read_multiple_byte(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
> +{
> + if (multiread_bit == true)
> + reg_addr |= ST_SENSORS_I2C_MULTIREAD;
> +
> + return i2c_smbus_read_i2c_block_data(to_i2c_client(dev),
> + reg_addr, len, data);
> +}
> +
> +static int st_sensors_i2c_write_byte(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, u8 data)
> +{
> + return i2c_smbus_write_byte_data(to_i2c_client(dev), reg_addr, data);
> +}
> +
> +void st_sensors_i2c_configure(struct iio_dev *indio_dev,
> + struct i2c_client *client, struct st_sensor_data *sdata)
> +{
> + i2c_set_clientdata(client, indio_dev);
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->name = client->name;
> +
> + mutex_init(&sdata->tf.buf_lock);
> + sdata->tf.read_byte = st_sensors_i2c_read_byte;
> + sdata->tf.write_byte = st_sensors_i2c_write_byte;
> + sdata->tf.read_multiple_byte = st_sensors_i2c_read_multiple_byte;
> + sdata->get_irq_data_ready = st_sensors_i2c_get_irq;
I review backwards through code so the same comments as written for the
spi equivalent apply here...
> +}
> +EXPORT_SYMBOL(st_sensors_i2c_configure);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics ST-sensors i2c driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
> new file mode 100644
> index 0000000..82fa633
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
> @@ -0,0 +1,124 @@
> +/*
> + * STMicroelectronics sensors spi library driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/iio/iio.h>
> +
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +#define ST_SENSORS_SPI_MULTIREAD 0xc0
> +#define ST_SENSORS_SPI_READ 0x80
> +
> +unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev)
> +{
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> + struct spi_device *spi = to_spi_device(sdata->dev);
> +
> + return spi->irq;
I'd roll this up slightly and drop the intermediate variable.
return to_spi_device(sdata->dev)->irq;
> +}
> +
> +static int st_sensors_spi_read(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
> +{
> + struct spi_message msg;
> + int err;
> +
> + struct spi_transfer xfers[] = {
> + {
> + .tx_buf = st->tx_buf,
> + .bits_per_word = 8,
> + .len = 1,
> + },
> + {
> + .rx_buf = st->rx_buf,
> + .bits_per_word = 8,
> + .len = len,
> + }
> + };
> +
> + mutex_lock(&st->buf_lock);
> + if ((multiread_bit == true) && (len > 1))
> + st->tx_buf[0] = reg_addr | ST_SENSORS_SPI_MULTIREAD;
> + else
> + st->tx_buf[0] = reg_addr | ST_SENSORS_SPI_READ;
> +
> + spi_message_init(&msg);
> + spi_message_add_tail(&xfers[0], &msg);
> + spi_message_add_tail(&xfers[1], &msg);
> + err = spi_sync(to_spi_device(dev), &msg);
> + if (err)
> + goto acc_spi_read_error;
> +
> + memcpy(data, st->rx_buf, len*sizeof(u8));
> + mutex_unlock(&st->buf_lock);
> + return len;
> +
> +acc_spi_read_error:
> + return err;
> +}
> +
> +static int st_sensors_spi_read_byte(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, u8 *res_byte)
> +{
> + return st_sensors_spi_read(st, dev, reg_addr, 1, res_byte, false);
> +}
> +
> +static int st_sensors_spi_read_multiple_byte(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
> +{
> + return st_sensors_spi_read(st, dev, reg_addr, len, data, multiread_bit);
> +}
> +
> +static int st_sensors_spi_write_byte(struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, u8 data)
> +{
> + struct spi_message msg;
> + int err;
> +
> + struct spi_transfer xfers = {
> + .tx_buf = st->tx_buf,
> + .bits_per_word = 8,
> + .len = 2,
> + };
> +
> + mutex_lock(&st->buf_lock);
> + st->tx_buf[0] = reg_addr;
> + st->tx_buf[1] = data;
> +
> + spi_message_init(&msg);
> + spi_message_add_tail(&xfers, &msg);
> + err = spi_sync(to_spi_device(dev), &msg);
> + mutex_unlock(&st->buf_lock);
> +
> + return err;
> +}
> +
> +void st_sensors_spi_configure(struct iio_dev *indio_dev,
> + struct spi_device *spi, struct st_sensor_data *sdata)
> +{
> + spi_set_drvdata(spi, indio_dev);
> +
> + indio_dev->dev.parent = &spi->dev;
> + indio_dev->name = spi->modalias;
> +
> + mutex_init(&sdata->tf.buf_lock);
Silly though it may seem I thik I'd prefer the mutex init in
st_sensors_init_sensor as it isn't spi or i2c specific whereas
everything else in here is...
> + sdata->tf.read_byte = st_sensors_spi_read_byte;
> + sdata->tf.write_byte = st_sensors_spi_write_byte;
> + sdata->tf.read_multiple_byte = st_sensors_spi_read_multiple_byte;
Might be worth wrapping these callbacks up in a const static structure rather
than along side the dynamic data in tf. (like we do with struct iio_info within
struct iio_dev)
> + sdata->get_irq_data_ready = st_sensors_spi_get_irq;
> +}
> +EXPORT_SYMBOL(st_sensors_spi_configure);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics ST-sensors spi driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
> new file mode 100644
> index 0000000..6d43b13
> --- /dev/null
> +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
> @@ -0,0 +1,76 @@
> +/*
> + * STMicroelectronics sensors trigger library driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/iio/common/st_sensors.h>
> +
> +int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
> + const struct iio_trigger_ops *trig_ops)
> +{
> + int err;
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
> + if (sdata->trig == NULL) {
> + err = -ENOMEM;
> + dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
> + goto iio_trigger_alloc_error;
> + }
> +
> + err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
> + iio_trigger_generic_data_rdy_poll,
> + NULL,
> + IRQF_TRIGGER_RISING,
> + sdata->trig->name,
> + sdata->trig);
> + if (err)
> + goto request_irq_error;
> +
> + sdata->trig->private_data = indio_dev;
> + sdata->trig->ops = trig_ops;
> + sdata->trig->dev.parent = sdata->dev;
> +
> + err = iio_trigger_register(sdata->trig);
> + if (err < 0) {
> + dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
> + goto iio_trigger_register_error;
> + }
> + indio_dev->trig = sdata->trig;
> +
> + return 0;
> +
> +iio_trigger_register_error:
> + free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
> +request_irq_error:
> + iio_trigger_free(sdata->trig);
> +iio_trigger_alloc_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_sensors_allocate_trigger);
> +
> +void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
> +{
> + struct st_sensor_data *sdata = iio_priv(indio_dev);
> +
> + iio_trigger_unregister(sdata->trig);
> + free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
> + iio_trigger_free(sdata->trig);
> +}
> +EXPORT_SYMBOL(st_sensors_deallocate_trigger);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> new file mode 100644
> index 0000000..c0f2acc
> --- /dev/null
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -0,0 +1,246 @@
> +/*
> + * STMicroelectronics sensors library driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#ifndef ST_SENSORS_H
> +#define ST_SENSORS_H
> +
> +#include <linux/i2c.h>
> +#include <linux/spi/spi.h>
> +#include <linux/irqreturn.h>
> +#include <linux/iio/trigger.h>
> +
> +
> +#define ST_SENSORS_TX_MAX_LENGHT 2
> +#define ST_SENSORS_RX_MAX_LENGHT 6
> +
> +#define ST_SENSORS_ODR_LIST_MAX 10
> +#define ST_SENSORS_FULLSCALE_AVL_MAX 10
> +
> +#define ST_SENSORS_NUMBER_ALL_CHANNELS 4
> +#define ST_SENSORS_NUMBER_DATA_CHANNELS 3
> +#define ST_SENSORS_ENABLE_ALL_CHANNELS 0x07
> +#define ST_SENSORS_BYTE_FOR_CHANNEL 2
> +#define ST_SENSORS_SCAN_X 0
> +#define ST_SENSORS_SCAN_Y 1
> +#define ST_SENSORS_SCAN_Z 2
> +#define ST_SENSORS_DEFAULT_12_REALBITS 12
> +#define ST_SENSORS_DEFAULT_16_REALBITS 16
> +#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01
> +#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00
> +#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f
> +#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20
> +#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07
> +#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3
> +
> +#define ST_SENSORS_LSM_CHANNELS(device_type, index, mod, endian, bits, addr) \
> +{ \
> + .type = device_type, \
> + .modified = 1, \
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
> + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
> + .scan_index = index, \
> + .channel2 = mod, \
> + .address = addr, \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = bits, \
> + .shift = 16 - bits, \
> + .storagebits = 16, \
> + .endianness = endian, \
> + }, \
> +}
> +
> +struct st_sensor_odr_avl {
> + unsigned int hz;
> + u8 value;
> +};
> +
> +struct st_sensor_odr {
> + u8 addr;
> + u8 mask;
> + short num_bit;
> + struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
> +};
> +
> +struct st_sensor_power {
> + u8 addr;
> + u8 mask;
> + unsigned short num_bit;
> + u8 value_off;
> + u8 value_on;
> +};
> +
> +struct st_sensor_axis {
> + u8 addr;
> + u8 mask;
> +};
> +
> +struct st_sensor_fullscale_avl {
> + unsigned int num;
> + u8 value;
> + unsigned int gain;
> + unsigned int gain2;
> +};
> +
> +struct st_sensor_fullscale {
> + u8 addr;
> + u8 mask;
> + unsigned short num_bit;
> + struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
> +};
> +
> +struct st_sensor_bdu {
> + u8 addr;
> + u8 mask;
> +};
> +
> +struct st_sensor_interrupt_generator {
> + u8 en_addr;
> + u8 latch_mask_addr;
> + u8 en_mask;
> + u8 latching_mask;
> +};
> +
> +struct st_sensor_data_ready_irq {
> + u8 addr;
> + u8 mask;
> + struct st_sensor_interrupt_generator ig1;
I'd just embed the definition in here
i.e. (assuming I remember the syntax correctly...)
struct st_sensor_data_read_irq {
u8 addr;
u8 mask;
struct {
u8 en_addr;
u8 latch_mask_addr;
u8 en_mask;
u8 latching_mask;
} ig1;
};
> +};
> +
> +/**
> + * struct st_sensor_transfer - ST sensor device I/O struct
> + * @buf_lock: Mutex to protect rx and tx buffers.
> + * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
> + * This buffer is used to avoid DMA not-aligned issue.
> + * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
> + * This buffer is used to avoid DMA not-aligned issue.
> + * @read_byte: Function used to read one byte.
> + * @write_byte: Function used to write one byte.
> + * @read_multiple_byte: Function used to read multiple byte.
> + */
> +struct st_sensor_transfer {
> + struct mutex buf_lock;
Move these to the end of the structure and all is fine
(as long as this is the last structure in any containing one as well -
see below).
Also only need to force alignment of the tx_buf
(as the rx_buf will pack after it and any hardware
that corrupts that is plain mad)
> + u8 tx_buf[ST_SENSORS_TX_MAX_LENGHT] ____cacheline_aligned;
> + u8 rx_buf[ST_SENSORS_RX_MAX_LENGHT] ____cacheline_aligned;
> + int (*read_byte) (struct st_sensor_transfer *st, struct device *dev,
> + u8 reg_addr, u8 *res_byte);
> + int (*write_byte) (struct st_sensor_transfer *st, struct device *dev,
> + u8 reg_addr, u8 data);
> + int (*read_multiple_byte) (struct st_sensor_transfer *st,
> + struct device *dev, u8 reg_addr, int len, u8 *data,
> + bool multiread_bit);
> +};
> +
> +/**
> + * struct st_sensor_data - ST sensor device status
> + * @dev: Pointer to instance of struct device (I2C or SPI).
> + * @trig: The trigger in use by the core driver.
> + * @enabled: Status of the sensor (false->off, true->on).
> + * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
> + * @index: Number used to point the sensor being used in the st_sensors struct.
> + * @buffer_data: Data used by buffer part.
> + * @fullscale: Maximum range of measure by the sensor.
> + * @gain: Sensitivity of the sensor [m/s^2/LSB].
> + * @odr: Output data rate of the sensor [Hz].
> + * @tf: Transfer function structure used by I/O operations.
> + */
> +struct st_sensor_data {
> + struct device *dev;
> + struct iio_trigger *trig;
> +
> + bool enabled;
> + bool multiread_bit;
> +
> + short index;
> +
> + char *buffer_data;
> +
> + unsigned int fullscale;
> + unsigned int gain;
> + unsigned int gain2;
> + unsigned int odr;
> +
This will need to also be at the end of this structure to ensure
that the below callback pointer doesn't end up on the same cacheline as
the tx_buf and rx_buf. A comment saying that this is a requirement here
will also make future bugs much less likely.
> + struct st_sensor_transfer tf;
> +
> + unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
> +};
> +
> +/**
> + * struct st_sensors - ST sensors list
> + * @wai: Contents of WhoAmI register.
> + * @ch: IIO channels for the sensor.
> + * @odr: Output data rate register and odr list available.
> + * @pw: Power register of the sensor.
> + * @enable_axis: Enable one or more axis of the sensor.
> + * @fs: Full scale register and fs list available.
> + * @bdu: Block data update register.
> + * @drdy_irq: Data ready register of the sensor.
> + * @multi_read_bit: Use or not particular bit for [I2C/SPI] multiread.
> + */
> +struct st_sensors {
> + u8 wai;
> + struct iio_chan_spec *ch;
> + struct st_sensor_odr odr;
> + struct st_sensor_power pw;
> + struct st_sensor_axis enable_axis;
> + struct st_sensor_fullscale fs;
> + struct st_sensor_bdu bdu;
> + struct st_sensor_data_ready_irq drdy_irq;
> + bool multi_read_bit;
> +};
> +
Either break these out to separate headers or deal with the fact that
spi or i2c might not be present in a given build with ifdef fun and
games.
> +void st_sensors_spi_configure(struct iio_dev *indio_dev,
> + struct spi_device *spi, struct st_sensor_data *sdata);
> +
> +void st_sensors_i2c_configure(struct iio_dev *indio_dev,
> + struct i2c_client *client, struct st_sensor_data *sdata);
> +
> +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, u8 reg_addr,
> + u8 mask, short num_bit, u8 data);
> +
> +int st_sensors_get_sampling_frequency_avl(struct iio_dev *indio_dev,
> + const struct st_sensor_odr_avl *odr_avl, char *buf);
> +
> +int st_sensors_get_fullscale_avl(struct iio_dev *indio_dev,
> + const struct st_sensor_fullscale_avl *fullscale_avl, char *buf);
> +
> +int st_sensors_set_odr(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, unsigned int odr);
> +
> +int st_sensors_set_fullscale(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, unsigned int fs);
> +
> +int st_sensors_set_enable(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, bool enable);
> +
> +int st_sensors_set_axis_enable(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, u8 axis_enable);
> +
> +int st_sensors_init_sensor(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor);
> +
> +int st_sensors_set_dataready_irq(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, bool enable);
> +
> +int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev,
> + const struct st_sensors *sensor, int scale);
> +
> +int st_sensors_read_axis_data(struct iio_dev *indio_dev, u8 ch_addr, int *data);
> +
> +int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
> + const struct iio_trigger_ops *trig_ops);
> +
> +void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
> +
> +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
> +
> +irqreturn_t st_sensors_trigger_handler(int irq, void *p);
> +
> +#endif /* ST_SENSORS_H */
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2012-12-13 13:11 STMicroelectronics sensors driver Denis CIOCCA
2012-12-13 13:11 ` [PATCH 1/4] iio:common: Add STMicroelectronics common library Denis CIOCCA
@ 2012-12-13 13:11 ` Denis CIOCCA
2012-12-16 11:51 ` Jonathan Cameron
2012-12-13 13:11 ` [PATCH 3/4] iio:gyro: Add STMicroelectronics gyroscopes driver Denis CIOCCA
` (2 subsequent siblings)
4 siblings, 1 reply; 15+ messages in thread
From: Denis CIOCCA @ 2012-12-13 13:11 UTC (permalink / raw)
To: jic23, lars; +Cc: linux-iio, Denis Ciocca
This patch adds generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
---
drivers/iio/accel/Kconfig | 41 +++
drivers/iio/accel/Makefile | 6 +
drivers/iio/accel/st_accel_buffer.c | 119 +++++++
drivers/iio/accel/st_accel_core.c | 613 ++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 88 +++++
drivers/iio/accel/st_accel_spi.c | 87 +++++
drivers/iio/accel/st_accel_trigger.c | 69 ++++
include/linux/iio/accel/st_accel.h | 57 ++++
8 files changed, 1080 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 drivers/iio/accel/st_accel_trigger.c
create mode 100644 include/linux/iio/accel/st_accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index fe4bcd7..013311f 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -13,4 +13,45 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select ST_SENSORS_CORE
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, the module
+ will be called st_accel.
+
+config ST_ACCEL_3AXIS_I2C
+ tristate "support I2C bus connection"
+ depends on ST_ACCEL_3AXIS && I2C
+ select ST_SENSORS_I2C
+ help
+ Say yes here to build I2C support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_i2c.
+
+config ST_ACCEL_3AXIS_SPI
+ tristate "support SPI bus connection"
+ depends on ST_ACCEL_3AXIS && SPI_MASTER
+ select ST_SENSORS_SPI
+ help
+ Say yes here to build SPI support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_spi.
+
+config ST_ACCEL_3AXIS_TRIGGERED_BUFFER
+ tristate "support triggered buffer"
+ depends on ST_ACCEL_3AXIS
+ select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ select ST_SENSORS_TRIGGERED_BUFFER
+ help
+ Default trigger and buffer for STMicroelectronics accelerometers driver.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..1541236 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,9 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+st_accel-y := st_accel_core.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_I2C) += st_accel_i2c.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_SPI) += st_accel_spi.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_TRIGGERED_BUFFER) += st_accel_trigger.o st_accel_buffer.o
+obj-$(CONFIG_ST_ACCEL_3AXIS) += st_accel.o
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..82bfde5
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = st_accel_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ msleep(1000/adata->odr);
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err, i;
+ u8 active_bit = 0x00;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++)
+ if (test_bit(i, indio_dev->active_scan_mask))
+ active_bit |= (1 << i);
+
+ err = st_accel_set_axis_enable(indio_dev, active_bit);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..173fdb2
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,613 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_N_BIT 4
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_N_BIT 2
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_N_BIT 2
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_PW_N_BIT 3
+#define ST_ACCEL_2_FS_N_BIT 2
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_N_BIT 4
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_N_BIT 3
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .num_bit = ST_ACCEL_1_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .num_bit = ST_ACCEL_2_ODR_N_BIT,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .num_bit = ST_ACCEL_2_PW_N_BIT,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .num_bit = ST_ACCEL_2_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .num_bit = ST_ACCEL_3_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ err = st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], true);
+ if (err < 0)
+ goto read_error;
+
+ msleep(2000/adata->odr);
+ err = st_sensors_read_axis_data(indio_dev,
+ ch->address, val);
+ if (err < 0)
+ goto read_error;
+
+ *val = *val >> ch->scan_type.shift;
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_accel_sensors[adata->index], val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_accel_sensors[adata->index], state);
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_accel_sensors[adata->index], active_bit);
+}
+EXPORT_SYMBOL(st_accel_set_axis_enable);
+
+static int st_accel_check_device_support(struct iio_dev *indio_dev)
+{
+ int i, err;
+ u8 wai;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = adata->tf.read_byte(&adata->tf, adata->dev,
+ ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
+ goto read_wai_error;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors); i++) {
+ if (st_accel_sensors[i].wai == wai)
+ break;
+ }
+ if (i == ARRAY_SIZE(st_accel_sensors))
+ goto check_device_error;
+
+ adata->index = i;
+
+ return i;
+
+check_device_error:
+ dev_err(&indio_dev->dev, "device not supported -> wai (0x%x).\n", wai);
+ err = -ENODEV;
+read_wai_error:
+ return err;
+}
+
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], enable);
+}
+EXPORT_SYMBOL(st_accel_set_enable);
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_accel_sensors[adata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_scale_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_fullscale_avl(indio_dev,
+ st_accel_sensors[adata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_accel_sensors[adata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
+ st_accel_sysfs_sampling_frequency_available, NULL , 0);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ st_accel_sysfs_scale_available, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info acc_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &acc_info;
+
+ err = st_accel_check_device_support(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->fullscale = st_accel_sensors[adata->index].fs.fs_avl[0].num;
+ adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_probe_trigger(indio_dev);
+ if (err < 0)
+ goto acc_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto iio_device_register_error;
+
+ return err;
+
+iio_device_register_error:
+ st_accel_remove_trigger(indio_dev);
+acc_probe_trigger_error:
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ iio_device_unregister(indio_dev);
+ st_accel_remove_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..272f353
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,88 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ st_accel_common_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..682e75f
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ st_accel_common_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_trigger.c b/drivers/iio/accel/st_accel_trigger.c
new file mode 100644
index 0000000..8fb6a8f
--- /dev/null
+++ b/drivers/iio/accel/st_accel_trigger.c
@@ -0,0 +1,69 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_accel_trig_acc_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+
+static int st_accel_trig_try_reenable(struct iio_trigger *trig)
+{
+ int err;
+ struct iio_dev *indio_dev = trig->private_data;
+
+ char *buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ st_sensors_get_buffer_element(indio_dev, buffer_data);
+ kfree(buffer_data);
+
+allocate_memory_error:
+ return 0;
+}
+
+const struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &st_accel_trig_acc_set_state,
+ .try_reenable = &st_accel_trig_try_reenable,
+};
+
+int st_accel_probe_trigger(struct iio_dev *indio_dev)
+{
+ return st_sensors_allocate_trigger(indio_dev, &st_accel_trigger_ops);
+}
+EXPORT_SYMBOL(st_accel_probe_trigger);
+
+void st_accel_remove_trigger(struct iio_dev *indio_dev)
+{
+ st_sensors_deallocate_trigger(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_remove_trigger);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..755a43e
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,57 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_probe_trigger(struct iio_dev *indio_dev);
+void st_accel_remove_trigger(struct iio_dev *indio_dev);
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_probe_trigger(struct iio_dev *indio_dev, int irq)
+{
+ return 0;
+}
+static inline void st_accel_remove_trigger(struct iio_dev *indio_dev, int irq)
+{
+ return;
+}
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2012-12-13 13:11 ` [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver Denis CIOCCA
@ 2012-12-16 11:51 ` Jonathan Cameron
0 siblings, 0 replies; 15+ messages in thread
From: Jonathan Cameron @ 2012-12-16 11:51 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: lars, linux-iio
On 12/13/2012 01:11 PM, Denis CIOCCA wrote:
> This patch adds generic accelerometer driver for STMicroelectronics
> accelerometers, currently it supports:
> LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
> LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Very nice. I'm lazy so for now I'll only review the
accel driver and assume the others are nice and similar ;)
(will probably take a close look at some point)
Couple of queries inline. I'd definitely like to see
an explanation in the try_reenable callback. It looks
suspiciously like an attempted work around for a race
condition and that worries me a little. Actually it
looks mighty like the hoops I jumped through with the
lis3l02dq. Are these really level interrupts where
we are pretending they are edge triggered? Maybe
I'm just imagining things ;)
Also, I can't immediately see why the trigger code
is accelerometer specific? I guess this was to try
and keep that optional for the various sub drivers?
If so there are probably cleaner ways of doing it that
result in less code sharing.
There are a few other places where code sharing could be
cut down, but only at the cost of added complexity in
reading the code so I think you are probably correct
to leave the repitition here at least for now!
Jonathan
> ---
> drivers/iio/accel/Kconfig | 41 +++
> drivers/iio/accel/Makefile | 6 +
> drivers/iio/accel/st_accel_buffer.c | 119 +++++++
> drivers/iio/accel/st_accel_core.c | 613 ++++++++++++++++++++++++++++++++++
> drivers/iio/accel/st_accel_i2c.c | 88 +++++
> drivers/iio/accel/st_accel_spi.c | 87 +++++
> drivers/iio/accel/st_accel_trigger.c | 69 ++++
> include/linux/iio/accel/st_accel.h | 57 ++++
> 8 files changed, 1080 insertions(+), 0 deletions(-)
> create mode 100644 drivers/iio/accel/st_accel_buffer.c
> create mode 100644 drivers/iio/accel/st_accel_core.c
> create mode 100644 drivers/iio/accel/st_accel_i2c.c
> create mode 100644 drivers/iio/accel/st_accel_spi.c
> create mode 100644 drivers/iio/accel/st_accel_trigger.c
> create mode 100644 include/linux/iio/accel/st_accel.h
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index fe4bcd7..013311f 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -13,4 +13,45 @@ config HID_SENSOR_ACCEL_3D
> Say yes here to build support for the HID SENSOR
> accelerometers 3D.
>
> +config ST_ACCEL_3AXIS
> + tristate "STMicroelectronics accelerometers 3-Axis Driver"
> + depends on (I2C || SPI_MASTER) && SYSFS
> + select ST_SENSORS_CORE
> + help
> + Say yes here to build support for STMicroelectronics accelerometers:
> + LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
> + LIS331DLH, LSM303DL, LSM303DLM, LSM330.
> +
> + This driver can also be built as a module. If so, the module
> + will be called st_accel.
> +
> +config ST_ACCEL_3AXIS_I2C
> + tristate "support I2C bus connection"
> + depends on ST_ACCEL_3AXIS && I2C
> + select ST_SENSORS_I2C
> + help
> + Say yes here to build I2C support for STMicroelectronics accelerometers.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called st_accel_i2c.
> +
> +config ST_ACCEL_3AXIS_SPI
> + tristate "support SPI bus connection"
> + depends on ST_ACCEL_3AXIS && SPI_MASTER
> + select ST_SENSORS_SPI
> + help
> + Say yes here to build SPI support for STMicroelectronics accelerometers.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called st_accel_spi.
> +
> +config ST_ACCEL_3AXIS_TRIGGERED_BUFFER
> + tristate "support triggered buffer"
> + depends on ST_ACCEL_3AXIS
> + select IIO_TRIGGERED_BUFFER
> + select IIO_BUFFER
> + select ST_SENSORS_TRIGGERED_BUFFER
> + help
> + Default trigger and buffer for STMicroelectronics accelerometers driver.
> +
> endmenu
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 5bc6855..1541236 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -3,3 +3,9 @@
> #
>
> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
> +
> +st_accel-y := st_accel_core.o
> +obj-$(CONFIG_ST_ACCEL_3AXIS_I2C) += st_accel_i2c.o
> +obj-$(CONFIG_ST_ACCEL_3AXIS_SPI) += st_accel_spi.o
> +obj-$(CONFIG_ST_ACCEL_3AXIS_TRIGGERED_BUFFER) += st_accel_trigger.o st_accel_buffer.o
> +obj-$(CONFIG_ST_ACCEL_3AXIS) += st_accel.o
> diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
> new file mode 100644
> index 0000000..82bfde5
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_buffer.c
> @@ -0,0 +1,119 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/stat.h>
> +#include <linux/interrupt.h>
> +#include <linux/byteorder/generic.h>
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#include <linux/iio/accel/st_accel.h>
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + err = st_accel_set_enable(indio_dev, true);
> + if (err < 0)
> + goto st_accel_set_enable_error;
> +
> + msleep(1000/adata->odr);
> +
> + err = iio_sw_buffer_preenable(indio_dev);
> +
> +st_accel_set_enable_error:
> + return err;
> +}
> +
> +static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
> +{
> + int err, i;
> + u8 active_bit = 0x00;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
> + if (adata->buffer_data == NULL) {
> + err = -ENOMEM;
> + goto allocate_memory_error;
> + }
> +
> + for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++)
> + if (test_bit(i, indio_dev->active_scan_mask))
> + active_bit |= (1 << i);
It's cheating a little, but why not just do
active_bit = indio_dev->active_scan_mask[0];
?
Or just put indio_dev->active_scan_mask[0] into the following
call directly.
Mind you this isn't a particularly fast path so maybe your
clear code is better...
> +
> + err = st_accel_set_axis_enable(indio_dev, active_bit);
> + if (err < 0)
> + goto st_accel_buffer_postenable_error;
> +
> + err = iio_triggered_buffer_postenable(indio_dev);
> + if (err < 0)
> + goto st_accel_buffer_postenable_error;
> +
> + return err;
> +
> +st_accel_buffer_postenable_error:
> + kfree(adata->buffer_data);
> +allocate_memory_error:
> + return err;
> +}
> +
> +static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + err = iio_triggered_buffer_predisable(indio_dev);
> + if (err < 0)
> + goto st_accel_buffer_predisable_error;
> +
> + err = st_accel_set_axis_enable(indio_dev,
> + ST_SENSORS_ENABLE_ALL_CHANNELS);
> + if (err < 0)
> + goto st_accel_buffer_predisable_error;
> +
> + err = st_accel_set_enable(indio_dev, false);
> +
> +st_accel_buffer_predisable_error:
> + kfree(adata->buffer_data);
> + return err;
> +}
> +
> +static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
> + .preenable = &st_accel_buffer_preenable,
> + .postenable = &st_accel_buffer_postenable,
> + .predisable = &st_accel_buffer_predisable,
> +};
> +
> +int st_accel_allocate_ring(struct iio_dev *indio_dev)
> +{
> + return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
> + &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
> +}
> +EXPORT_SYMBOL(st_accel_allocate_ring);
> +
> +void st_accel_deallocate_ring(struct iio_dev *indio_dev)
> +{
> + iio_triggered_buffer_cleanup(indio_dev);
> +}
> +EXPORT_SYMBOL(st_accel_deallocate_ring);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> new file mode 100644
> index 0000000..173fdb2
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -0,0 +1,613 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/errno.h>
> +#include <linux/types.h>
> +#include <linux/mutex.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/irq.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/buffer.h>
> +
> +#include <linux/iio/accel/st_accel.h>
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +/* DEFAULT VALUE FOR SENSORS */
> +#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
> +#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
> +#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
> +
> +/* FULLSCALE */
> +#define ST_ACCEL_FS_AVL_2G 2
> +#define ST_ACCEL_FS_AVL_4G 4
> +#define ST_ACCEL_FS_AVL_6G 6
> +#define ST_ACCEL_FS_AVL_8G 8
> +#define ST_ACCEL_FS_AVL_16G 16
> +
> +/* CUSTOM VALUES FOR SENSOR 1 */
> +#define ST_ACCEL_1_WAI_EXP 0x33
> +#define ST_ACCEL_1_ODR_ADDR 0x20
> +#define ST_ACCEL_1_ODR_MASK 0xf0
> +#define ST_ACCEL_1_ODR_N_BIT 4
> +#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
> +#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
> +#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
> +#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
> +#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
> +#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
> +#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
> +#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
> +#define ST_ACCEL_1_FS_N_BIT 2
> +#define ST_ACCEL_1_FS_ADDR 0x23
> +#define ST_ACCEL_1_FS_MASK 0x30
> +#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
> +#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
> +#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
> +#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
> +#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
> +#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
> +#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
> +#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
> +#define ST_ACCEL_1_BDU_ADDR 0x23
> +#define ST_ACCEL_1_BDU_MASK 0x80
> +#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
> +#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
> +#define ST_ACCEL_1_MULTIREAD_BIT true
> +
> +/* CUSTOM VALUES FOR SENSOR 2 */
> +#define ST_ACCEL_2_WAI_EXP 0x32
> +#define ST_ACCEL_2_ODR_ADDR 0x20
> +#define ST_ACCEL_2_ODR_MASK 0x18
> +#define ST_ACCEL_2_ODR_N_BIT 2
> +#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
> +#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
> +#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
> +#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
> +#define ST_ACCEL_2_PW_ADDR 0x20
> +#define ST_ACCEL_2_PW_MASK 0xe0
> +#define ST_ACCEL_2_PW_N_BIT 3
> +#define ST_ACCEL_2_FS_N_BIT 2
> +#define ST_ACCEL_2_FS_ADDR 0x23
> +#define ST_ACCEL_2_FS_MASK 0x30
> +#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
> +#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
> +#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
> +#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
> +#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
> +#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
> +#define ST_ACCEL_2_BDU_ADDR 0x23
> +#define ST_ACCEL_2_BDU_MASK 0x80
> +#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
> +#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
> +#define ST_ACCEL_2_MULTIREAD_BIT true
> +
> +/* CUSTOM VALUES FOR SENSOR 3 */
> +#define ST_ACCEL_3_WAI_EXP 0x40
> +#define ST_ACCEL_3_ODR_ADDR 0x20
> +#define ST_ACCEL_3_ODR_MASK 0xf0
> +#define ST_ACCEL_3_ODR_N_BIT 4
> +#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
> +#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
> +#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
> +#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
> +#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
> +#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
> +#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
> +#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
> +#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
> +#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
> +#define ST_ACCEL_3_FS_N_BIT 3
> +#define ST_ACCEL_3_FS_ADDR 0x24
> +#define ST_ACCEL_3_FS_MASK 0x38
> +#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
> +#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
> +#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
> +#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
> +#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
> +#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
> +#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
> +#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
> +#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
> +#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
> +#define ST_ACCEL_3_BDU_ADDR 0x20
> +#define ST_ACCEL_3_BDU_MASK 0x08
> +#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
> +#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
> +#define ST_ACCEL_3_IG1_EN_ADDR 0x23
> +#define ST_ACCEL_3_IG1_EN_MASK 0x08
> +#define ST_ACCEL_3_MULTIREAD_BIT false
> +
> +static const struct iio_chan_spec st_accel_12bit_channels[] = {
> + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
> + ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
> + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
> + ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
> + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
> + ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
> + IIO_CHAN_SOFT_TIMESTAMP(3)
> +};
> +
> +static const struct iio_chan_spec st_accel_16bit_channels[] = {
> + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
> + ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
> + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
> + ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
> + ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
> + ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
> + IIO_CHAN_SOFT_TIMESTAMP(3)
> +};
> +
> +static const struct st_sensors st_accel_sensors[] = {
> + {
> + .wai = ST_ACCEL_1_WAI_EXP,
> + .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> + .odr = {
> + .addr = ST_ACCEL_1_ODR_ADDR,
> + .mask = ST_ACCEL_1_ODR_MASK,
> + .num_bit = ST_ACCEL_1_ODR_N_BIT,
> + .odr_avl = {
> + { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
> + { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
> + { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
> + { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
> + { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
> + { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
> + { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
> + { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
> + },
> + },
> + .pw = {
> + .addr = ST_ACCEL_1_ODR_ADDR,
> + .mask = ST_ACCEL_1_ODR_MASK,
> + .num_bit = ST_ACCEL_1_ODR_N_BIT,
> + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> + },
> + .enable_axis = {
> + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
> + .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> + },
> + .fs = {
> + .addr = ST_ACCEL_1_FS_ADDR,
> + .mask = ST_ACCEL_1_FS_MASK,
> + .num_bit = ST_ACCEL_1_FS_N_BIT,
> + .fs_avl = {
> + [0] = {
> + .num = ST_ACCEL_FS_AVL_2G,
> + .value = ST_ACCEL_1_FS_AVL_2_VAL,
> + .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
> + },
> + [1] = {
> + .num = ST_ACCEL_FS_AVL_4G,
> + .value = ST_ACCEL_1_FS_AVL_4_VAL,
> + .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
> + },
> + [2] = {
> + .num = ST_ACCEL_FS_AVL_8G,
> + .value = ST_ACCEL_1_FS_AVL_8_VAL,
> + .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
> + },
> + [3] = {
> + .num = ST_ACCEL_FS_AVL_16G,
> + .value = ST_ACCEL_1_FS_AVL_16_VAL,
> + .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
> + },
> + },
> + },
> + .bdu = {
> + .addr = ST_ACCEL_1_BDU_ADDR,
> + .mask = ST_ACCEL_1_BDU_MASK,
> + },
> + .drdy_irq = {
> + .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
> + .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
> + },
> + .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
> + },
> + {
> + .wai = ST_ACCEL_2_WAI_EXP,
> + .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> + .odr = {
> + .addr = ST_ACCEL_2_ODR_ADDR,
> + .mask = ST_ACCEL_2_ODR_MASK,
> + .num_bit = ST_ACCEL_2_ODR_N_BIT,
> + .odr_avl = {
> + { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
> + { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
> + { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
> + { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
> + },
> + },
> + .pw = {
> + .addr = ST_ACCEL_2_PW_ADDR,
> + .mask = ST_ACCEL_2_PW_MASK,
> + .num_bit = ST_ACCEL_2_PW_N_BIT,
> + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
> + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> + },
> + .enable_axis = {
> + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
> + .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> + },
> + .fs = {
> + .addr = ST_ACCEL_2_FS_ADDR,
> + .mask = ST_ACCEL_2_FS_MASK,
> + .num_bit = ST_ACCEL_2_FS_N_BIT,
> + .fs_avl = {
> + [0] = {
> + .num = ST_ACCEL_FS_AVL_2G,
> + .value = ST_ACCEL_2_FS_AVL_2_VAL,
> + .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
> + },
> + [1] = {
> + .num = ST_ACCEL_FS_AVL_4G,
> + .value = ST_ACCEL_2_FS_AVL_4_VAL,
> + .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
> + },
> + [2] = {
> + .num = ST_ACCEL_FS_AVL_8G,
> + .value = ST_ACCEL_2_FS_AVL_8_VAL,
> + .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
> + },
> + },
> + },
> + .bdu = {
> + .addr = ST_ACCEL_2_BDU_ADDR,
> + .mask = ST_ACCEL_2_BDU_MASK,
> + },
> + .drdy_irq = {
> + .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
> + .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
> + },
> + .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
> + },
> + {
> + .wai = ST_ACCEL_3_WAI_EXP,
> + .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
> + .odr = {
> + .addr = ST_ACCEL_3_ODR_ADDR,
> + .mask = ST_ACCEL_3_ODR_MASK,
> + .num_bit = ST_ACCEL_3_ODR_N_BIT,
> + .odr_avl = {
> + { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
> + { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
> + { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
> + { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
> + { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
> + { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
> + { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
> + { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
> + { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
> + { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
> + },
> + },
> + .pw = {
> + .addr = ST_ACCEL_3_ODR_ADDR,
> + .mask = ST_ACCEL_3_ODR_MASK,
> + .num_bit = ST_ACCEL_3_ODR_N_BIT,
> + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> + },
> + .enable_axis = {
> + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
> + .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> + },
> + .fs = {
> + .addr = ST_ACCEL_3_FS_ADDR,
> + .mask = ST_ACCEL_3_FS_MASK,
> + .num_bit = ST_ACCEL_3_FS_N_BIT,
> + .fs_avl = {
> + [0] = {
> + .num = ST_ACCEL_FS_AVL_2G,
> + .value = ST_ACCEL_3_FS_AVL_2_VAL,
> + .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
> + },
> + [1] = {
> + .num = ST_ACCEL_FS_AVL_4G,
> + .value = ST_ACCEL_3_FS_AVL_4_VAL,
> + .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
> + },
> + [2] = {
> + .num = ST_ACCEL_FS_AVL_6G,
> + .value = ST_ACCEL_3_FS_AVL_6_VAL,
> + .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
> + },
> + [3] = {
> + .num = ST_ACCEL_FS_AVL_8G,
> + .value = ST_ACCEL_3_FS_AVL_8_VAL,
> + .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
> + },
> + [4] = {
> + .num = ST_ACCEL_FS_AVL_16G,
> + .value = ST_ACCEL_3_FS_AVL_16_VAL,
> + .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
> + },
> + },
> + },
> + .bdu = {
> + .addr = ST_ACCEL_3_BDU_ADDR,
> + .mask = ST_ACCEL_3_BDU_MASK,
> + },
> + .drdy_irq = {
> + .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
> + .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
> + .ig1 = {
> + .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
> + .en_mask = ST_ACCEL_3_IG1_EN_MASK,
> + },
> + },
> + .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
> + },
> +};
> +
> +static int st_accel_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *ch, int *val,
> + int *val2, long mask)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + mutex_lock(&indio_dev->mlock);
> + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
> + err = -EBUSY;
> + goto read_error;
> + } else {
> + err = st_sensors_set_enable(indio_dev,
> + &st_accel_sensors[adata->index], true);
> + if (err < 0)
> + goto read_error;
> +
> + msleep(2000/adata->odr);
> + err = st_sensors_read_axis_data(indio_dev,
> + ch->address, val);
> + if (err < 0)
> + goto read_error;
> +
> + *val = *val >> ch->scan_type.shift;
> + }
> + mutex_unlock(&indio_dev->mlock);
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = 0;
> + *val2 = adata->gain;
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + return -EINVAL;
> + }
> +
> +read_error:
> + mutex_unlock(&indio_dev->mlock);
> + return err;
> +}
> +
> +static int st_accel_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2, long mask)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + err = st_sensors_set_fullscale_by_gain(indio_dev,
> + &st_accel_sensors[adata->index], val2);
> + break;
> + default:
> + err = -EINVAL;
> + }
> +
> + return err;
> +}
> +
> +int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
> +{
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_set_dataready_irq(indio_dev,
> + &st_accel_sensors[adata->index], state);
> +}
> +EXPORT_SYMBOL(st_accel_set_dataready_irq);
> +
> +int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
> +{
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_set_axis_enable(indio_dev,
> + &st_accel_sensors[adata->index], active_bit);
> +}
> +EXPORT_SYMBOL(st_accel_set_axis_enable);
> +
> +static int st_accel_check_device_support(struct iio_dev *indio_dev)
> +{
> + int i, err;
> + u8 wai;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + err = adata->tf.read_byte(&adata->tf, adata->dev,
> + ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
> + if (err < 0) {
> + dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
> + goto read_wai_error;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(st_accel_sensors); i++) {
> + if (st_accel_sensors[i].wai == wai)
> + break;
> + }
> + if (i == ARRAY_SIZE(st_accel_sensors))
> + goto check_device_error;
> +
> + adata->index = i;
> +
> + return i;
> +
> +check_device_error:
> + dev_err(&indio_dev->dev, "device not supported -> wai (0x%x).\n", wai);
> + err = -ENODEV;
> +read_wai_error:
> + return err;
> +}
> +
> +int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
> +{
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_set_enable(indio_dev,
> + &st_accel_sensors[adata->index], enable);
> +}
> +EXPORT_SYMBOL(st_accel_set_enable);
> +
> +static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + int err;
> + unsigned int odr;
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + err = kstrtoint(buf, 10, &odr);
> + if (err < 0)
> + goto conversion_error;
> +
> + mutex_lock(&indio_dev->mlock);
> + err = st_sensors_set_odr(indio_dev,
> + &st_accel_sensors[adata->index], odr);
> + mutex_unlock(&indio_dev->mlock);
> +
> +conversion_error:
> + return err < 0 ? err : size;
> +}
> +
> +static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return sprintf(buf, "%d\n", adata->odr);
> +}
> +
> +static ssize_t st_accel_sysfs_scale_available(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_get_fullscale_avl(indio_dev,
> + st_accel_sensors[adata->index].fs.fs_avl, buf);
> +}
> +
> +static ssize_t st_accel_sysfs_sampling_frequency_available(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_get_sampling_frequency_avl(indio_dev,
> + st_accel_sensors[adata->index].odr.odr_avl, buf);
> +}
> +
> +static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
> + st_accel_sysfs_sampling_frequency_available, NULL , 0);
> +
> +static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
> + st_accel_sysfs_scale_available, NULL , 0);
> +
> +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
> + st_accel_sysfs_get_sampling_frequency,
> + st_accel_sysfs_set_sampling_frequency);
> +
> +static struct attribute *st_accel_attributes[] = {
> + &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
> + &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
> + &iio_dev_attr_sampling_frequency.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group st_accel_attribute_group = {
> + .attrs = st_accel_attributes,
> +};
> +
> +static const struct iio_info acc_info = {
> + .driver_module = THIS_MODULE,
> + .attrs = &st_accel_attribute_group,
> + .read_raw = &st_accel_read_raw,
> + .write_raw = &st_accel_write_raw,
> +};
> +
> +int st_accel_common_probe(struct iio_dev *indio_dev)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &acc_info;
> +
convention is to verify that the device is the one probed for.
Even if it is another device supported by the driver the probe
should fail if the wrong one is specified (otherwise things
get way to confusing ;)
> + err = st_accel_check_device_support(indio_dev);
> + if (err < 0)
> + goto st_accel_common_probe_error;
> +
> + adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
> + indio_dev->channels = st_accel_sensors[adata->index].ch;
> + indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
> +
> + adata->fullscale = st_accel_sensors[adata->index].fs.fs_avl[0].num;
> + adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
> +
> + err = st_sensors_init_sensor(indio_dev,
> + &st_accel_sensors[adata->index]);
> + if (err < 0)
> + goto st_accel_common_probe_error;
> +
Does it make sense to allocate the ring if no trigger is available?
> + err = st_accel_allocate_ring(indio_dev);
> + if (err < 0)
> + goto st_accel_common_probe_error;
> +
> + if (adata->get_irq_data_ready(indio_dev) > 0) {
> + err = st_accel_probe_trigger(indio_dev);
> + if (err < 0)
> + goto acc_probe_trigger_error;
> + }
> +
> + err = iio_device_register(indio_dev);
> + if (err)
> + goto iio_device_register_error;
> +
> + return err;
> +
> +iio_device_register_error:
> + st_accel_remove_trigger(indio_dev);
> +acc_probe_trigger_error:
> + st_accel_deallocate_ring(indio_dev);
> +st_accel_common_probe_error:
> + return err;
> +}
> +EXPORT_SYMBOL(st_accel_common_probe);
> +
> +void st_accel_common_remove(struct iio_dev *indio_dev)
> +{
> + iio_device_unregister(indio_dev);
> + st_accel_remove_trigger(indio_dev);
> + st_accel_deallocate_ring(indio_dev);
> + iio_device_free(indio_dev);
> +}
> +EXPORT_SYMBOL(st_accel_common_remove);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> new file mode 100644
> index 0000000..272f353
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -0,0 +1,88 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger.h>
> +
> +#include <linux/iio/accel/st_accel.h>
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +static int st_accel_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct iio_dev *indio_dev;
> + struct st_sensor_data *adata;
> + int err;
> +
> + indio_dev = iio_device_alloc(sizeof(*adata));
> + if (indio_dev == NULL) {
> + err = -ENOMEM;
> + goto iio_device_alloc_error;
> + }
> +
> + adata = iio_priv(indio_dev);
> + adata->dev = &client->dev;
> +
> + st_sensors_i2c_configure(indio_dev, client, adata);
> +
> + err = st_accel_common_probe(indio_dev);
> + if (err < 0)
> + goto st_accel_common_probe_error;
> +
> + return 0;
> +
> +st_accel_common_probe_error:
> + iio_device_free(indio_dev);
> +iio_device_alloc_error:
> + return err;
> +}
> +
> +static int st_accel_i2c_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + st_accel_common_remove(indio_dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id st_accel_id_table[] = {
> + { LSM303DLH_ACCEL_DEV_NAME },
> + { LSM303DLHC_ACCEL_DEV_NAME },
> + { LIS3DH_ACCEL_DEV_NAME },
> + { LSM330D_ACCEL_DEV_NAME },
> + { LSM330DL_ACCEL_DEV_NAME },
> + { LSM330DLC_ACCEL_DEV_NAME },
> + { LIS331DLH_ACCEL_DEV_NAME },
> + { LSM303DL_ACCEL_DEV_NAME },
> + { LSM303DLM_ACCEL_DEV_NAME },
> + { LSM330_ACCEL_DEV_NAME },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> +
> +static struct i2c_driver st_accel_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "st-accel-i2c",
> + },
> + .probe = st_accel_i2c_probe,
> + .remove = st_accel_i2c_remove,
> + .id_table = st_accel_id_table,
> +};
> +module_i2c_driver(st_accel_driver);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> new file mode 100644
> index 0000000..682e75f
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -0,0 +1,87 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/spi/spi.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger.h>
> +
> +#include <linux/iio/accel/st_accel.h>
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +static int st_accel_spi_probe(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev;
> + struct st_sensor_data *adata;
> + int err;
> +
> + indio_dev = iio_device_alloc(sizeof(*adata));
> + if (indio_dev == NULL) {
> + err = -ENOMEM;
> + goto iio_device_alloc_error;
> + }
> +
> + adata = iio_priv(indio_dev);
> + adata->dev = &spi->dev;
> +
> + st_sensors_spi_configure(indio_dev, spi, adata);
> +
> + err = st_accel_common_probe(indio_dev);
> + if (err < 0)
> + goto st_accel_common_probe_error;
> +
> + return 0;
> +
> +st_accel_common_probe_error:
> + iio_device_free(indio_dev);
> +iio_device_alloc_error:
> + return err;
> +}
> +
> +static int st_accel_spi_remove(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev = spi_get_drvdata(spi);
> + st_accel_common_remove(indio_dev);
No real benefit in having the above in two lines.
st_accel_common_remove(spi_get_drvdata(spi));
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id st_accel_id_table[] = {
> + { LSM303DLH_ACCEL_DEV_NAME },
> + { LSM303DLHC_ACCEL_DEV_NAME },
> + { LIS3DH_ACCEL_DEV_NAME },
> + { LSM330D_ACCEL_DEV_NAME },
> + { LSM330DL_ACCEL_DEV_NAME },
> + { LSM330DLC_ACCEL_DEV_NAME },
> + { LIS331DLH_ACCEL_DEV_NAME },
> + { LSM303DL_ACCEL_DEV_NAME },
> + { LSM303DLM_ACCEL_DEV_NAME },
> + { LSM330_ACCEL_DEV_NAME },
> + {},
> +};
> +MODULE_DEVICE_TABLE(spi, st_accel_id_table);
> +
> +static struct spi_driver st_accel_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "st-accel-spi",
> + },
> + .probe = st_accel_spi_probe,
> + .remove = st_accel_spi_remove,
> + .id_table = st_accel_id_table,
> +};
> +module_spi_driver(st_accel_driver);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/st_accel_trigger.c b/drivers/iio/accel/st_accel_trigger.c
> new file mode 100644
> index 0000000..8fb6a8f
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_trigger.c
Nothing in this file appears accelerometer specific.
Move it into iio/common/st_sensors/ and share across drivers?
> @@ -0,0 +1,69 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/stat.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/irq.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger.h>
> +
> +#include <linux/iio/accel/st_accel.h>
> +#include <linux/iio/common/st_sensors.h>
> +
> +
> +int st_accel_trig_acc_set_state(struct iio_trigger *trig, bool state)
> +{
> + struct iio_dev *indio_dev = trig->private_data;
> + return st_accel_set_dataready_irq(indio_dev, state);
> +}
> +
> +static int st_accel_trig_try_reenable(struct iio_trigger *trig)
> +{
> + int err;
> + struct iio_dev *indio_dev = trig->private_data;
> +
I'd be tempted to preallocate this as part of the iio_priv structure.
Just make it big enough to take anything that can hit it.
> + char *buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
> + if (buffer_data == NULL) {
> + err = -ENOMEM;
> + goto allocate_memory_error;
> + }
> +
I'm not following what is going on here, could you add a comment
to explain why this makes sense?
> + st_sensors_get_buffer_element(indio_dev, buffer_data);
> + kfree(buffer_data);
> +
> +allocate_memory_error:
> + return 0;
> +}
> +
> +const struct iio_trigger_ops st_accel_trigger_ops = {
> + .owner = THIS_MODULE,
> + .set_trigger_state = &st_accel_trig_acc_set_state,
> + .try_reenable = &st_accel_trig_try_reenable,
> +};
> +
> +int st_accel_probe_trigger(struct iio_dev *indio_dev)
> +{
> + return st_sensors_allocate_trigger(indio_dev, &st_accel_trigger_ops);
> +}
> +EXPORT_SYMBOL(st_accel_probe_trigger);
> +
> +void st_accel_remove_trigger(struct iio_dev *indio_dev)
> +{
> + st_sensors_deallocate_trigger(indio_dev);
> +}
> +EXPORT_SYMBOL(st_accel_remove_trigger);
> +
> +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics accelerometers trigger");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
> new file mode 100644
> index 0000000..755a43e
> --- /dev/null
> +++ b/include/linux/iio/accel/st_accel.h
> @@ -0,0 +1,57 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + * v. 1.0.0
> + * Licensed under the GPL-2.
> + */
> +
> +#ifndef ST_ACCEL_H
> +#define ST_ACCEL_H
> +
> +#include <linux/types.h>
> +#include "../common/st_sensors.h"
> +
> +#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
> +#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
> +#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
> +#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
> +#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
> +#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
> +#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
> +#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
> +#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
> +#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
> +
> +int st_accel_common_probe(struct iio_dev *indio_dev);
> +void st_accel_common_remove(struct iio_dev *indio_dev);
> +int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
> +int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
> +int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
> +
> +#ifdef CONFIG_IIO_BUFFER
> +int st_accel_probe_trigger(struct iio_dev *indio_dev);
> +void st_accel_remove_trigger(struct iio_dev *indio_dev);
> +int st_accel_allocate_ring(struct iio_dev *indio_dev);
> +void st_accel_deallocate_ring(struct iio_dev *indio_dev);
> +#else /* CONFIG_IIO_BUFFER */
> +static inline int st_accel_probe_trigger(struct iio_dev *indio_dev, int irq)
> +{
> + return 0;
> +}
> +static inline void st_accel_remove_trigger(struct iio_dev *indio_dev, int irq)
> +{
> + return;
> +}
> +static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
> +{
> + return 0;
> +}
> +static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
> +{
> +}
> +#endif /* CONFIG_IIO_BUFFER */
> +
> +#endif /* ST_ACCEL_H */
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/4] iio:gyro: Add STMicroelectronics gyroscopes driver
2012-12-13 13:11 STMicroelectronics sensors driver Denis CIOCCA
2012-12-13 13:11 ` [PATCH 1/4] iio:common: Add STMicroelectronics common library Denis CIOCCA
2012-12-13 13:11 ` [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver Denis CIOCCA
@ 2012-12-13 13:11 ` Denis CIOCCA
2012-12-13 13:11 ` [PATCH 4/4] iio:magnetometer: Add STMicroelectronics magnetometers driver Denis CIOCCA
2012-12-16 11:28 ` STMicroelectronics sensors driver Jonathan Cameron
4 siblings, 0 replies; 15+ messages in thread
From: Denis CIOCCA @ 2012-12-13 13:11 UTC (permalink / raw)
To: jic23, lars; +Cc: linux-iio, Denis Ciocca
This patch adds generic gyroscope driver for STMicroelectronics
gyroscopes, currently it supports:
L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.
---
drivers/iio/gyro/Kconfig | 40 +++
drivers/iio/gyro/Makefile | 6 +
drivers/iio/gyro/st_gyro_buffer.c | 119 +++++++++
drivers/iio/gyro/st_gyro_core.c | 481 ++++++++++++++++++++++++++++++++++++
drivers/iio/gyro/st_gyro_i2c.c | 85 +++++++
drivers/iio/gyro/st_gyro_spi.c | 84 +++++++
drivers/iio/gyro/st_gyro_trigger.c | 67 +++++
include/linux/iio/gyro/st_gyro.h | 54 ++++
8 files changed, 936 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/gyro/st_gyro_buffer.c
create mode 100644 drivers/iio/gyro/st_gyro_core.c
create mode 100644 drivers/iio/gyro/st_gyro_i2c.c
create mode 100644 drivers/iio/gyro/st_gyro_spi.c
create mode 100644 drivers/iio/gyro/st_gyro_trigger.c
create mode 100644 include/linux/iio/gyro/st_gyro.h
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 48ed148..6942cd8 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -22,4 +22,44 @@ config HID_SENSOR_GYRO_3D
Say yes here to build support for the HID SENSOR
Gyroscope 3D.
+config ST_GYRO_3AXIS
+ tristate "STMicroelectronics gyroscopes 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select ST_SENSORS_CORE
+ help
+ Say yes here to build support for STMicroelectronics gyroscopes:
+ L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.
+
+ This driver can also be built as a module. If so, the module
+ will be called st_gyro.
+
+config ST_GYRO_3AXIS_I2C
+ tristate "support I2C bus connection"
+ depends on ST_GYRO_3AXIS && I2C
+ select ST_SENSORS_I2C
+ help
+ Say yes here to build I2C support for STMicroelectronics gyroscopes.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_gyro_i2c.
+
+config ST_GYRO_3AXIS_SPI
+ tristate "support SPI bus connection"
+ depends on ST_GYRO_3AXIS && SPI_MASTER
+ select ST_SENSORS_SPI
+ help
+ Say yes here to build SPI support for STMicroelectronics gyroscopes.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_gyro_spi.
+
+config ST_GYRO_3AXIS_TRIGGERED_BUFFER
+ tristate "support triggered buffer"
+ depends on ST_GYRO_3AXIS
+ select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ select ST_SENSORS_TRIGGERED_BUFFER
+ help
+ Default trigger and buffer for STMicroelectronics gyroscopes driver.
+
endmenu
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index 702a058..59dca8b 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -4,3 +4,9 @@
obj-$(CONFIG_ADIS16136) += adis16136.o
obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
+
+st_gyro-y := st_gyro_core.o
+obj-$(CONFIG_ST_GYRO_3AXIS_I2C) += st_gyro_i2c.o
+obj-$(CONFIG_ST_GYRO_3AXIS_SPI) += st_gyro_spi.o
+obj-$(CONFIG_ST_GYRO_3AXIS_TRIGGERED_BUFFER) += st_gyro_trigger.o st_gyro_buffer.o
+obj-$(CONFIG_ST_GYRO_3AXIS) += st_gyro.o
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
new file mode 100644
index 0000000..884a414
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/gyro/st_gyro.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_gyro_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ err = st_gyro_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_gyro_set_enable_error;
+
+ msleep(1000/gdata->odr);
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_gyro_set_enable_error:
+ return err;
+}
+
+static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err, i;
+ u8 active_bit = 0x00;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ gdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (gdata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ for (i = 0; i < ST_SENSORS_NUMBER_DATA_CHANNELS; i++)
+ if (test_bit(i, indio_dev->active_scan_mask))
+ active_bit |= (1 << i);
+
+ err = st_gyro_set_axis_enable(indio_dev, active_bit);
+ if (err < 0)
+ goto st_gyro_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_gyro_buffer_postenable_error;
+
+ return err;
+
+st_gyro_buffer_postenable_error:
+ kfree(gdata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_gyro_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_gyro_buffer_predisable_error;
+
+ err = st_gyro_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_gyro_buffer_predisable_error;
+
+ err = st_gyro_set_enable(indio_dev, false);
+
+st_gyro_buffer_predisable_error:
+ kfree(gdata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = {
+ .preenable = &st_gyro_buffer_preenable,
+ .postenable = &st_gyro_buffer_postenable,
+ .predisable = &st_gyro_buffer_predisable,
+};
+
+int st_gyro_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_gyro_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_gyro_allocate_ring);
+
+void st_gyro_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_gyro_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
new file mode 100644
index 0000000..8a257b8
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -0,0 +1,481 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/gyro/st_gyro.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_GYRO_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_GYRO_FS_AVL_250DPS 250
+#define ST_GYRO_FS_AVL_500DPS 500
+#define ST_GYRO_FS_AVL_2000DPS 2000
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_GYRO_1_WAI_EXP 0xd3
+#define ST_GYRO_1_ODR_ADDR 0x20
+#define ST_GYRO_1_ODR_MASK 0xc0
+#define ST_GYRO_1_ODR_N_BIT 2
+#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00
+#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01
+#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02
+#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03
+#define ST_GYRO_1_PW_ADDR 0x20
+#define ST_GYRO_1_PW_MASK 0x08
+#define ST_GYRO_1_PW_N_BIT 1
+#define ST_GYRO_1_FS_N_BIT 2
+#define ST_GYRO_1_FS_ADDR 0x23
+#define ST_GYRO_1_FS_MASK 0x30
+#define ST_GYRO_1_FS_AVL_250_VAL 0x00
+#define ST_GYRO_1_FS_AVL_500_VAL 0x01
+#define ST_GYRO_1_FS_AVL_2000_VAL 0x02
+#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
+#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
+#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
+#define ST_GYRO_1_BDU_ADDR 0x23
+#define ST_GYRO_1_BDU_MASK 0x80
+#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
+#define ST_GYRO_1_DRDY_IRQ_MASK 0x08
+#define ST_GYRO_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_GYRO_2_WAI_EXP 0xd4
+#define ST_GYRO_2_ODR_ADDR 0x20
+#define ST_GYRO_2_ODR_MASK 0xc0
+#define ST_GYRO_2_ODR_N_BIT 2
+#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00
+#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01
+#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02
+#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03
+#define ST_GYRO_2_PW_ADDR 0x20
+#define ST_GYRO_2_PW_MASK 0x08
+#define ST_GYRO_2_PW_N_BIT 1
+#define ST_GYRO_2_FS_N_BIT 2
+#define ST_GYRO_2_FS_ADDR 0x23
+#define ST_GYRO_2_FS_MASK 0x30
+#define ST_GYRO_2_FS_AVL_250_VAL 0x00
+#define ST_GYRO_2_FS_AVL_500_VAL 0x01
+#define ST_GYRO_2_FS_AVL_2000_VAL 0x02
+#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
+#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
+#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
+#define ST_GYRO_2_BDU_ADDR 0x23
+#define ST_GYRO_2_BDU_MASK 0x80
+#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
+#define ST_GYRO_2_DRDY_IRQ_MASK 0x08
+#define ST_GYRO_2_MULTIREAD_BIT true
+
+const struct iio_chan_spec st_gyro_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_X,
+ IIO_MOD_X, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+ ST_GYRO_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Y,
+ IIO_MOD_Y, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+ ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Z,
+ IIO_MOD_Z, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+ ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_gyro_sensors[] = {
+ {
+ .wai = ST_GYRO_1_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+ .odr = {
+ .addr = ST_GYRO_1_ODR_ADDR,
+ .mask = ST_GYRO_1_ODR_MASK,
+ .num_bit = ST_GYRO_1_ODR_N_BIT,
+ .odr_avl = {
+ { 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
+ { 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_GYRO_1_PW_ADDR,
+ .mask = ST_GYRO_1_PW_MASK,
+ .num_bit = ST_GYRO_1_PW_N_BIT,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_GYRO_1_FS_ADDR,
+ .mask = ST_GYRO_1_FS_MASK,
+ .num_bit = ST_GYRO_1_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_GYRO_FS_AVL_250DPS,
+ .value = ST_GYRO_1_FS_AVL_250_VAL,
+ .gain = ST_GYRO_1_FS_AVL_250_GAIN,
+ },
+ [1] = {
+ .num = ST_GYRO_FS_AVL_500DPS,
+ .value = ST_GYRO_1_FS_AVL_500_VAL,
+ .gain = ST_GYRO_1_FS_AVL_500_GAIN,
+ },
+ [2] = {
+ .num = ST_GYRO_FS_AVL_2000DPS,
+ .value = ST_GYRO_1_FS_AVL_2000_VAL,
+ .gain = ST_GYRO_1_FS_AVL_2000_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_GYRO_1_BDU_ADDR,
+ .mask = ST_GYRO_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_GYRO_1_DRDY_IRQ_ADDR,
+ .mask = ST_GYRO_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_GYRO_2_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+ .odr = {
+ .addr = ST_GYRO_2_ODR_ADDR,
+ .mask = ST_GYRO_2_ODR_MASK,
+ .num_bit = ST_GYRO_2_ODR_N_BIT,
+ .odr_avl = {
+ { 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
+ { 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
+ { 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
+ { 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_GYRO_2_PW_ADDR,
+ .mask = ST_GYRO_2_PW_MASK,
+ .num_bit = ST_GYRO_2_PW_N_BIT,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_GYRO_2_FS_ADDR,
+ .mask = ST_GYRO_2_FS_MASK,
+ .num_bit = ST_GYRO_2_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_GYRO_FS_AVL_250DPS,
+ .value = ST_GYRO_2_FS_AVL_250_VAL,
+ .gain = ST_GYRO_2_FS_AVL_250_GAIN,
+ },
+ [1] = {
+ .num = ST_GYRO_FS_AVL_500DPS,
+ .value = ST_GYRO_2_FS_AVL_500_VAL,
+ .gain = ST_GYRO_2_FS_AVL_500_GAIN,
+ },
+ [2] = {
+ .num = ST_GYRO_FS_AVL_2000DPS,
+ .value = ST_GYRO_2_FS_AVL_2000_VAL,
+ .gain = ST_GYRO_2_FS_AVL_2000_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_GYRO_2_BDU_ADDR,
+ .mask = ST_GYRO_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_GYRO_2_DRDY_IRQ_ADDR,
+ .mask = ST_GYRO_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
+ },
+};
+
+static int st_gyro_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ err = st_sensors_set_enable(indio_dev,
+ &st_gyro_sensors[gdata->index], true);
+ if (err < 0)
+ goto read_error;
+
+ msleep(2000/gdata->odr);
+ err = st_sensors_read_axis_data(indio_dev,
+ ch->address, val);
+ if (err < 0)
+ goto read_error;
+
+ *val = *val >> ch->scan_type.shift;
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = gdata->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_gyro_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_gyro_sensors[gdata->index], val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+int st_gyro_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_gyro_sensors[gdata->index], state);
+}
+EXPORT_SYMBOL(st_gyro_set_dataready_irq);
+
+int st_gyro_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_gyro_sensors[gdata->index], active_bit);
+}
+EXPORT_SYMBOL(st_gyro_set_axis_enable);
+
+static int st_gyro_check_device_support(struct iio_dev *indio_dev)
+{
+ int i, err;
+ u8 wai;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ err = gdata->tf.read_byte(&gdata->tf, gdata->dev,
+ ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
+ goto read_wai_error;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(st_gyro_sensors); i++) {
+ if (st_gyro_sensors[i].wai == wai)
+ break;
+ }
+ if (i == ARRAY_SIZE(st_gyro_sensors))
+ goto check_device_error;
+
+ gdata->index = i;
+
+ return i;
+
+check_device_error:
+ dev_err(&indio_dev->dev, "device not supported -> wai (0x%x).\n", wai);
+ err = -ENODEV;
+read_wai_error:
+ return err;
+}
+
+int st_gyro_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_gyro_sensors[gdata->index], enable);
+}
+EXPORT_SYMBOL(st_gyro_set_enable);
+
+static ssize_t st_gyro_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_gyro_sensors[gdata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_gyro_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", gdata->odr);
+}
+
+static ssize_t st_gyro_sysfs_scale_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ return st_sensors_get_fullscale_avl(indio_dev,
+ st_gyro_sensors[gdata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_gyro_sysfs_sampling_frequency_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_gyro_sensors[gdata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
+ st_gyro_sysfs_sampling_frequency_available, NULL , 0);
+
+static IIO_DEVICE_ATTR(in_anglvel_scale_available, S_IRUGO,
+ st_gyro_sysfs_scale_available, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_gyro_sysfs_get_sampling_frequency,
+ st_gyro_sysfs_set_sampling_frequency);
+
+static struct attribute *st_gyro_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_gyro_attribute_group = {
+ .attrs = st_gyro_attributes,
+};
+
+static const struct iio_info acc_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_gyro_attribute_group,
+ .read_raw = &st_gyro_read_raw,
+ .write_raw = &st_gyro_write_raw,
+};
+
+int st_gyro_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &acc_info;
+
+ err = st_gyro_check_device_support(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ gdata->multiread_bit = st_gyro_sensors[gdata->index].multi_read_bit;
+ indio_dev->channels = st_gyro_sensors[gdata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ gdata->fullscale = st_gyro_sensors[gdata->index].fs.fs_avl[0].num;
+ gdata->odr = st_gyro_sensors[gdata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_gyro_sensors[gdata->index]);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ err = st_gyro_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ if (gdata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_gyro_probe_trigger(indio_dev);
+ if (err < 0)
+ goto acc_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto iio_device_register_error;
+
+ return err;
+
+iio_device_register_error:
+ st_gyro_remove_trigger(indio_dev);
+acc_probe_trigger_error:
+ st_gyro_deallocate_ring(indio_dev);
+st_gyro_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_gyro_common_probe);
+
+void st_gyro_common_remove(struct iio_dev *indio_dev)
+{
+ iio_device_unregister(indio_dev);
+ st_gyro_remove_trigger(indio_dev);
+ st_gyro_deallocate_ring(indio_dev);
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_gyro_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
new file mode 100644
index 0000000..d8c1af4
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -0,0 +1,85 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/gyro/st_gyro.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_gyro_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *gdata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*gdata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ gdata = iio_priv(indio_dev);
+ gdata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, gdata);
+
+ err = st_gyro_common_probe(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ return 0;
+
+st_gyro_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_gyro_i2c_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ st_gyro_common_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id st_gyro_id_table[] = {
+ { L3G4200D_GYRO_DEV_NAME },
+ { LSM330DL_GYRO_DEV_NAME },
+ { L3GD20_GYRO_DEV_NAME },
+ { L3GD20H_GYRO_DEV_NAME },
+ { LSM330DLC_GYRO_DEV_NAME },
+ { L3G4IS_GYRO_DEV_NAME },
+ { LSM330_GYRO_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_gyro_id_table);
+
+static struct i2c_driver st_gyro_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-gyro-i2c",
+ },
+ .probe = st_gyro_i2c_probe,
+ .remove = st_gyro_i2c_remove,
+ .id_table = st_gyro_id_table,
+};
+module_i2c_driver(st_gyro_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
new file mode 100644
index 0000000..5f807bc
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -0,0 +1,84 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/gyro/st_gyro.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_gyro_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *gdata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*gdata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ gdata = iio_priv(indio_dev);
+ gdata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, gdata);
+
+ err = st_gyro_common_probe(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ return 0;
+
+st_gyro_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_gyro_spi_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ st_gyro_common_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id st_gyro_id_table[] = {
+ { L3G4200D_GYRO_DEV_NAME },
+ { LSM330DL_GYRO_DEV_NAME },
+ { L3GD20_GYRO_DEV_NAME },
+ { L3GD20H_GYRO_DEV_NAME },
+ { LSM330DLC_GYRO_DEV_NAME },
+ { L3G4IS_GYRO_DEV_NAME },
+ { LSM330_GYRO_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_gyro_id_table);
+
+static struct spi_driver st_gyro_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-gyro-spi",
+ },
+ .probe = st_gyro_spi_probe,
+ .remove = st_gyro_spi_remove,
+ .id_table = st_gyro_id_table,
+};
+module_spi_driver(st_gyro_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_trigger.c b/drivers/iio/gyro/st_gyro_trigger.c
new file mode 100644
index 0000000..dd41405
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_trigger.c
@@ -0,0 +1,67 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/gyro/st_gyro.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_gyro_trig_acc_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_gyro_set_dataready_irq(indio_dev, state);
+}
+
+static int st_gyro_trig_try_reenable(struct iio_trigger *trig)
+{
+ int err;
+ struct iio_dev *indio_dev = trig->private_data;
+
+ char *buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ st_sensors_get_buffer_element(indio_dev, buffer_data);
+ kfree(buffer_data);
+
+allocate_memory_error:
+ return 0;
+}
+
+const struct iio_trigger_ops st_gyro_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &st_gyro_trig_acc_set_state,
+ .try_reenable = &st_gyro_trig_try_reenable,
+};
+
+int st_gyro_probe_trigger(struct iio_dev *indio_dev)
+{
+ return st_sensors_allocate_trigger(indio_dev, &st_gyro_trigger_ops);
+}
+EXPORT_SYMBOL(st_gyro_probe_trigger);
+
+void st_gyro_remove_trigger(struct iio_dev *indio_dev)
+{
+ st_sensors_deallocate_trigger(indio_dev);
+}
+EXPORT_SYMBOL(st_gyro_remove_trigger);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/gyro/st_gyro.h b/include/linux/iio/gyro/st_gyro.h
new file mode 100644
index 0000000..98be950
--- /dev/null
+++ b/include/linux/iio/gyro/st_gyro.h
@@ -0,0 +1,54 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_GYRO_H
+#define ST_GYRO_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define L3G4200D_GYRO_DEV_NAME "l3g4200d"
+#define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro"
+#define L3GD20_GYRO_DEV_NAME "l3gd20"
+#define L3GD20H_GYRO_DEV_NAME "l3gd20h"
+#define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro"
+#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
+#define LSM330_GYRO_DEV_NAME "lsm330_gyro"
+
+int st_gyro_common_probe(struct iio_dev *indio_dev);
+void st_gyro_common_remove(struct iio_dev *indio_dev);
+int st_gyro_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_gyro_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_gyro_set_enable(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_gyro_probe_trigger(struct iio_dev *indio_dev);
+void st_gyro_remove_trigger(struct iio_dev *indio_dev);
+int st_gyro_allocate_ring(struct iio_dev *indio_dev);
+void st_gyro_deallocate_ring(struct iio_dev *indio_dev);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_gyro_probe_trigger(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_gyro_remove_trigger(struct iio_dev *indio_dev)
+{
+ return;
+}
+static inline int st_gyro_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_gyro_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_GYRO_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH 4/4] iio:magnetometer: Add STMicroelectronics magnetometers driver
2012-12-13 13:11 STMicroelectronics sensors driver Denis CIOCCA
` (2 preceding siblings ...)
2012-12-13 13:11 ` [PATCH 3/4] iio:gyro: Add STMicroelectronics gyroscopes driver Denis CIOCCA
@ 2012-12-13 13:11 ` Denis CIOCCA
2012-12-16 11:28 ` STMicroelectronics sensors driver Jonathan Cameron
4 siblings, 0 replies; 15+ messages in thread
From: Denis CIOCCA @ 2012-12-13 13:11 UTC (permalink / raw)
To: jic23, lars; +Cc: linux-iio, Denis Ciocca
This patch adds generic magnetometer driver for STMicroelectronics
magnetometers, currently it supports:
LSM303DLHC, LSM303DLM, LIS3MDL.
---
drivers/iio/magnetometer/Kconfig | 40 +++
drivers/iio/magnetometer/Makefile | 6 +
drivers/iio/magnetometer/st_magn_buffer.c | 105 ++++++
drivers/iio/magnetometer/st_magn_core.c | 518 ++++++++++++++++++++++++++++
drivers/iio/magnetometer/st_magn_i2c.c | 81 +++++
drivers/iio/magnetometer/st_magn_spi.c | 80 +++++
drivers/iio/magnetometer/st_magn_trigger.c | 62 ++++
include/linux/iio/magnetometer/st_magn.h | 49 +++
8 files changed, 941 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/magnetometer/st_magn_buffer.c
create mode 100644 drivers/iio/magnetometer/st_magn_core.c
create mode 100644 drivers/iio/magnetometer/st_magn_i2c.c
create mode 100644 drivers/iio/magnetometer/st_magn_spi.c
create mode 100644 drivers/iio/magnetometer/st_magn_trigger.c
create mode 100644 include/linux/iio/magnetometer/st_magn.h
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index c1f0cdd..4f7cec2 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -13,4 +13,44 @@ config HID_SENSOR_MAGNETOMETER_3D
Say yes here to build support for the HID SENSOR
Magnetometer 3D.
+config ST_MAGN_3AXIS
+ tristate "STMicroelectronics magnetometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select ST_SENSORS_CORE
+ help
+ Say yes here to build support for STMicroelectronics magnetometers:
+ LSM303DLHC, LSM303DLM, LIS3MDL.
+
+ This driver can also be built as a module. If so, the module
+ will be called st_magn.
+
+config ST_MAGN_3AXIS_I2C
+ tristate "support I2C bus connection"
+ depends on ST_MAGN_3AXIS && I2C
+ select ST_SENSORS_I2C
+ help
+ Say yes here to build I2C support for STMicroelectronics magnetometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_magn_i2c.
+
+config ST_MAGN_3AXIS_SPI
+ tristate "support SPI bus connection"
+ depends on ST_MAGN_3AXIS && SPI_MASTER
+ select ST_SENSORS_SPI
+ help
+ Say yes here to build SPI support for STMicroelectronics magnetometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_magn_spi.
+
+config ST_MAGN_3AXIS_TRIGGERED_BUFFER
+ tristate "support triggered buffer"
+ depends on ST_MAGN_3AXIS
+ select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ select ST_SENSORS_TRIGGERED_BUFFER
+ help
+ Default trigger and buffer for STMicroelectronics magnetometers driver.
+
endmenu
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
index 60dc4f2..9be7f48 100644
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -3,3 +3,9 @@
#
obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
+
+st_magn-y := st_magn_core.o
+obj-$(CONFIG_ST_MAGN_3AXIS_I2C) += st_magn_i2c.o
+obj-$(CONFIG_ST_MAGN_3AXIS_SPI) += st_magn_spi.o
+obj-$(CONFIG_ST_MAGN_3AXIS_TRIGGERED_BUFFER) += st_magn_trigger.o st_magn_buffer.o
+obj-$(CONFIG_ST_MAGN_3AXIS) += st_magn.o
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
new file mode 100644
index 0000000..f6221cc
--- /dev/null
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -0,0 +1,105 @@
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/magnetometer/st_magn.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_magn_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ err = st_magn_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_magn_set_enable_error;
+
+ msleep(1000/mdata->odr);
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_magn_set_enable_error:
+ return err;
+}
+
+static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ mdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (mdata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_magn_buffer_postenable_error;
+
+ return err;
+
+st_magn_buffer_postenable_error:
+ kfree(mdata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_magn_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_magn_buffer_predisable_error;
+
+ err = st_magn_set_enable(indio_dev, false);
+
+st_magn_buffer_predisable_error:
+ kfree(mdata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = {
+ .preenable = &st_magn_buffer_preenable,
+ .postenable = &st_magn_buffer_postenable,
+ .predisable = &st_magn_buffer_predisable,
+};
+
+int st_magn_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_magn_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_magn_allocate_ring);
+
+void st_magn_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_magn_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics magnetometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
new file mode 100644
index 0000000..ed081e7
--- /dev/null
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -0,0 +1,518 @@
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/magnetometer/st_magn.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_MAGN_DEFAULT_OUT_X_L_ADDR 0X04
+#define ST_MAGN_DEFAULT_OUT_Y_L_ADDR 0X08
+#define ST_MAGN_DEFAULT_OUT_Z_L_ADDR 0X06
+
+/* FULLSCALE */
+#define ST_MAGN_FS_AVL_1300MG 1300
+#define ST_MAGN_FS_AVL_1900MG 1900
+#define ST_MAGN_FS_AVL_2500MG 2500
+#define ST_MAGN_FS_AVL_4000MG 4000
+#define ST_MAGN_FS_AVL_4700MG 4700
+#define ST_MAGN_FS_AVL_5600MG 5600
+#define ST_MAGN_FS_AVL_8000MG 8000
+#define ST_MAGN_FS_AVL_8100MG 8100
+#define ST_MAGN_FS_AVL_10000MG 10000
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_MAGN_1_WAI_EXP 0x3c
+#define ST_MAGN_1_ODR_ADDR 0x00
+#define ST_MAGN_1_ODR_MASK 0x1c
+#define ST_MAGN_1_ODR_N_BIT 3
+#define ST_MAGN_1_ODR_AVL_1HZ_VAL 0x00
+#define ST_MAGN_1_ODR_AVL_2HZ_VAL 0x01
+#define ST_MAGN_1_ODR_AVL_3HZ_VAL 0x02
+#define ST_MAGN_1_ODR_AVL_8HZ_VAL 0x03
+#define ST_MAGN_1_ODR_AVL_15HZ_VAL 0x04
+#define ST_MAGN_1_ODR_AVL_30HZ_VAL 0x05
+#define ST_MAGN_1_ODR_AVL_75HZ_VAL 0x06
+#define ST_MAGN_1_ODR_AVL_220HZ_VAL 0x07
+#define ST_MAGN_1_PW_ADDR 0x02
+#define ST_MAGN_1_PW_MASK 0x03
+#define ST_MAGN_1_PW_N_BIT 2
+#define ST_MAGN_1_PW_ON 0x00
+#define ST_MAGN_1_PW_OFF 0x03
+#define ST_MAGN_1_FS_N_BIT 3
+#define ST_MAGN_1_FS_ADDR 0x01
+#define ST_MAGN_1_FS_MASK 0xe0
+#define ST_MAGN_1_FS_AVL_1300_VAL 0x01
+#define ST_MAGN_1_FS_AVL_1900_VAL 0x02
+#define ST_MAGN_1_FS_AVL_2500_VAL 0x03
+#define ST_MAGN_1_FS_AVL_4000_VAL 0x04
+#define ST_MAGN_1_FS_AVL_4700_VAL 0x05
+#define ST_MAGN_1_FS_AVL_5600_VAL 0x06
+#define ST_MAGN_1_FS_AVL_8100_VAL 0x07
+#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 1100
+#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 855
+#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 670
+#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 450
+#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 400
+#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 330
+#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 230
+#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 980
+#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 760
+#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 600
+#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 400
+#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 355
+#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 295
+#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 205
+#define ST_MAGN_1_MULTIREAD_BIT false
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_MAGN_2_WAI_EXP 0x3d
+#define ST_MAGN_2_ODR_ADDR 0x20
+#define ST_MAGN_2_ODR_MASK 0x1c
+#define ST_MAGN_2_ODR_N_BIT 3
+#define ST_MAGN_2_ODR_AVL_1HZ_VAL 0x00
+#define ST_MAGN_2_ODR_AVL_2HZ_VAL 0x01
+#define ST_MAGN_2_ODR_AVL_3HZ_VAL 0x02
+#define ST_MAGN_2_ODR_AVL_5HZ_VAL 0x03
+#define ST_MAGN_2_ODR_AVL_10HZ_VAL 0x04
+#define ST_MAGN_2_ODR_AVL_20HZ_VAL 0x05
+#define ST_MAGN_2_ODR_AVL_40HZ_VAL 0x06
+#define ST_MAGN_2_ODR_AVL_80HZ_VAL 0x07
+#define ST_MAGN_2_PW_ADDR 0x22
+#define ST_MAGN_2_PW_MASK 0x03
+#define ST_MAGN_2_PW_N_BIT 2
+#define ST_MAGN_2_PW_ON 0x00
+#define ST_MAGN_2_PW_OFF 0x03
+#define ST_MAGN_2_FS_N_BIT 2
+#define ST_MAGN_2_FS_ADDR 0x21
+#define ST_MAGN_2_FS_MASK 0x60
+#define ST_MAGN_2_FS_AVL_4000_VAL 0x00
+#define ST_MAGN_2_FS_AVL_8000_VAL 0x01
+#define ST_MAGN_2_FS_AVL_10000_VAL 0x02
+#define ST_MAGN_2_FS_AVL_4000_GAIN 430
+#define ST_MAGN_2_FS_AVL_8000_GAIN 230
+#define ST_MAGN_2_FS_AVL_10000_GAIN 230
+#define ST_MAGN_2_MULTIREAD_BIT false
+#define ST_MAGN_2_OUT_X_L_ADDR 0x28
+#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
+#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
+
+static const struct iio_chan_spec st_magn_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_magn_sensors[] = {
+ {
+ .wai = ST_MAGN_1_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_magn_16bit_channels,
+ .odr = {
+ .addr = ST_MAGN_1_ODR_ADDR,
+ .mask = ST_MAGN_1_ODR_MASK,
+ .num_bit = ST_MAGN_1_ODR_N_BIT,
+ .odr_avl = {
+ { 1, ST_MAGN_1_ODR_AVL_1HZ_VAL, },
+ { 2, ST_MAGN_1_ODR_AVL_2HZ_VAL, },
+ { 3, ST_MAGN_1_ODR_AVL_3HZ_VAL, },
+ { 8, ST_MAGN_1_ODR_AVL_8HZ_VAL, },
+ { 15, ST_MAGN_1_ODR_AVL_15HZ_VAL, },
+ { 30, ST_MAGN_1_ODR_AVL_30HZ_VAL, },
+ { 75, ST_MAGN_1_ODR_AVL_75HZ_VAL, },
+ { 220, ST_MAGN_1_ODR_AVL_220HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_MAGN_1_PW_ADDR,
+ .mask = ST_MAGN_1_PW_MASK,
+ .num_bit = ST_MAGN_1_PW_N_BIT,
+ .value_on = ST_MAGN_1_PW_ON,
+ .value_off = ST_MAGN_1_PW_OFF,
+ },
+ .fs = {
+ .addr = ST_MAGN_1_FS_ADDR,
+ .mask = ST_MAGN_1_FS_MASK,
+ .num_bit = ST_MAGN_1_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_MAGN_FS_AVL_1300MG,
+ .value = ST_MAGN_1_FS_AVL_1300_VAL,
+ .gain = ST_MAGN_1_FS_AVL_1300_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_1300_GAIN_Z,
+ },
+ [1] = {
+ .num = ST_MAGN_FS_AVL_1900MG,
+ .value = ST_MAGN_1_FS_AVL_1900_VAL,
+ .gain = ST_MAGN_1_FS_AVL_1900_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_1900_GAIN_Z,
+ },
+ [2] = {
+ .num = ST_MAGN_FS_AVL_2500MG,
+ .value = ST_MAGN_1_FS_AVL_2500_VAL,
+ .gain = ST_MAGN_1_FS_AVL_2500_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_2500_GAIN_Z,
+ },
+ [3] = {
+ .num = ST_MAGN_FS_AVL_4000MG,
+ .value = ST_MAGN_1_FS_AVL_4000_VAL,
+ .gain = ST_MAGN_1_FS_AVL_4000_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_4000_GAIN_Z,
+ },
+ [4] = {
+ .num = ST_MAGN_FS_AVL_4700MG,
+ .value = ST_MAGN_1_FS_AVL_4700_VAL,
+ .gain = ST_MAGN_1_FS_AVL_4700_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_4700_GAIN_Z,
+ },
+ [5] = {
+ .num = ST_MAGN_FS_AVL_5600MG,
+ .value = ST_MAGN_1_FS_AVL_5600_VAL,
+ .gain = ST_MAGN_1_FS_AVL_5600_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_5600_GAIN_Z,
+ },
+ [6] = {
+ .num = ST_MAGN_FS_AVL_8100MG,
+ .value = ST_MAGN_1_FS_AVL_8100_VAL,
+ .gain = ST_MAGN_1_FS_AVL_8100_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z,
+ },
+ },
+ },
+ .multi_read_bit = ST_MAGN_1_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_MAGN_2_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
+ .odr = {
+ .addr = ST_MAGN_2_ODR_ADDR,
+ .mask = ST_MAGN_2_ODR_MASK,
+ .num_bit = ST_MAGN_2_ODR_N_BIT,
+ .odr_avl = {
+ { 1, ST_MAGN_2_ODR_AVL_1HZ_VAL, },
+ { 2, ST_MAGN_2_ODR_AVL_2HZ_VAL, },
+ { 3, ST_MAGN_2_ODR_AVL_3HZ_VAL, },
+ { 5, ST_MAGN_2_ODR_AVL_5HZ_VAL, },
+ { 10, ST_MAGN_2_ODR_AVL_10HZ_VAL, },
+ { 20, ST_MAGN_2_ODR_AVL_20HZ_VAL, },
+ { 40, ST_MAGN_2_ODR_AVL_40HZ_VAL, },
+ { 80, ST_MAGN_2_ODR_AVL_80HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_MAGN_2_PW_ADDR,
+ .mask = ST_MAGN_2_PW_MASK,
+ .num_bit = ST_MAGN_2_PW_N_BIT,
+ .value_on = ST_MAGN_2_PW_ON,
+ .value_off = ST_MAGN_2_PW_OFF,
+ },
+ .fs = {
+ .addr = ST_MAGN_2_FS_ADDR,
+ .mask = ST_MAGN_2_FS_MASK,
+ .num_bit = ST_MAGN_2_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_MAGN_FS_AVL_4000MG,
+ .value = ST_MAGN_2_FS_AVL_4000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_4000_GAIN,
+ },
+ [1] = {
+ .num = ST_MAGN_FS_AVL_8000MG,
+ .value = ST_MAGN_2_FS_AVL_8000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_8000_GAIN,
+ },
+ [2] = {
+ .num = ST_MAGN_FS_AVL_10000MG,
+ .value = ST_MAGN_2_FS_AVL_10000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_10000_GAIN,
+ },
+ },
+ },
+ .multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
+ },
+};
+
+static int st_magn_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ err = st_sensors_set_enable(indio_dev,
+ &st_magn_sensors[mdata->index], true);
+ if (err < 0)
+ goto read_error;
+
+ msleep(2000/mdata->odr);
+ err = st_sensors_read_axis_data(indio_dev,
+ ch->address, val);
+ if (err < 0)
+ goto read_error;
+
+ *val = *val >> ch->scan_type.shift;
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ if (ch->scan_index != ST_SENSORS_SCAN_Z)
+ *val2 = mdata->gain;
+ else
+ *val2 = mdata->gain2;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_magn_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_magn_sensors[mdata->index], val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+int st_magn_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ return 0;
+}
+EXPORT_SYMBOL(st_magn_set_axis_enable);
+
+static int st_magn_check_device_support(struct iio_dev *indio_dev)
+{
+ int i, err;
+ u8 wai;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ err = mdata->tf.read_byte(&mdata->tf, mdata->dev,
+ ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
+ goto read_wai_error;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(st_magn_sensors); i++) {
+ if (st_magn_sensors[i].wai == wai)
+ break;
+ }
+ if (i == ARRAY_SIZE(st_magn_sensors))
+ goto check_device_error;
+
+ mdata->index = i;
+
+ return i;
+
+check_device_error:
+ dev_err(&indio_dev->dev, "device not supported -> wai (0x%x).\n", wai);
+ err = -ENODEV;
+read_wai_error:
+ return err;
+}
+
+int st_magn_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_magn_sensors[mdata->index], enable);
+}
+EXPORT_SYMBOL(st_magn_set_enable);
+
+static ssize_t st_magn_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_magn_sensors[mdata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_magn_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", mdata->odr);
+}
+
+static ssize_t st_magn_sysfs_scale_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ return st_sensors_get_fullscale_avl(indio_dev,
+ st_magn_sensors[mdata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_magn_sysfs_sampling_frequency_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_magn_sensors[mdata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
+ st_magn_sysfs_sampling_frequency_available, NULL , 0);
+
+static IIO_DEVICE_ATTR(in_magn_scale_available, S_IRUGO,
+ st_magn_sysfs_scale_available, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_magn_sysfs_get_sampling_frequency,
+ st_magn_sysfs_set_sampling_frequency);
+
+static struct attribute *st_magn_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_magn_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_magn_attribute_group = {
+ .attrs = st_magn_attributes,
+};
+
+static const struct iio_info acc_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_magn_attribute_group,
+ .read_raw = &st_magn_read_raw,
+ .write_raw = &st_magn_write_raw,
+};
+
+int st_magn_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &acc_info;
+
+ err = st_magn_check_device_support(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ mdata->multiread_bit = st_magn_sensors[mdata->index].multi_read_bit;
+ indio_dev->channels = st_magn_sensors[mdata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ mdata->fullscale = st_magn_sensors[mdata->index].fs.fs_avl[0].num;
+ mdata->odr = st_magn_sensors[mdata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_magn_sensors[mdata->index]);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ err = st_magn_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ if (mdata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_magn_probe_trigger(indio_dev);
+ if (err < 0)
+ goto acc_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto iio_device_register_error;
+
+ return err;
+
+iio_device_register_error:
+ st_magn_remove_trigger(indio_dev);
+acc_probe_trigger_error:
+ st_magn_deallocate_ring(indio_dev);
+st_magn_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_magn_common_probe);
+
+void st_magn_common_remove(struct iio_dev *indio_dev)
+{
+ iio_device_unregister(indio_dev);
+ st_magn_remove_trigger(indio_dev);
+ st_magn_deallocate_ring(indio_dev);
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_magn_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
new file mode 100644
index 0000000..d090104
--- /dev/null
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -0,0 +1,81 @@
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/magnetometer/st_magn.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_magn_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *mdata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*mdata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ mdata = iio_priv(indio_dev);
+ mdata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, mdata);
+
+ err = st_magn_common_probe(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ return 0;
+
+st_magn_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_magn_i2c_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ st_magn_common_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id st_magn_id_table[] = {
+ { LSM303DLHC_MAGN_DEV_NAME },
+ { LSM303DLM_MAGN_DEV_NAME },
+ { LIS3MDL_MAGN_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_magn_id_table);
+
+static struct i2c_driver st_magn_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-magn-i2c",
+ },
+ .probe = st_magn_i2c_probe,
+ .remove = st_magn_i2c_remove,
+ .id_table = st_magn_id_table,
+};
+module_i2c_driver(st_magn_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics magnetometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
new file mode 100644
index 0000000..3d3cdc7
--- /dev/null
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -0,0 +1,80 @@
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/magnetometer/st_magn.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_magn_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *mdata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*mdata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ mdata = iio_priv(indio_dev);
+ mdata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, mdata);
+
+ err = st_magn_common_probe(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ return 0;
+
+st_magn_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_magn_spi_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ st_magn_common_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id st_magn_id_table[] = {
+ { LSM303DLHC_MAGN_DEV_NAME },
+ { LSM303DLM_MAGN_DEV_NAME },
+ { LIS3MDL_MAGN_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_magn_id_table);
+
+static struct spi_driver st_magn_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-magn-spi",
+ },
+ .probe = st_magn_spi_probe,
+ .remove = st_magn_spi_remove,
+ .id_table = st_magn_id_table,
+};
+module_spi_driver(st_magn_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics magnetometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/magnetometer/st_magn_trigger.c b/drivers/iio/magnetometer/st_magn_trigger.c
new file mode 100644
index 0000000..4ac774d
--- /dev/null
+++ b/drivers/iio/magnetometer/st_magn_trigger.c
@@ -0,0 +1,62 @@
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/magnetometer/st_magn.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_magn_trig_try_reenable(struct iio_trigger *trig)
+{
+ int err;
+ struct iio_dev *indio_dev = trig->private_data;
+
+ char *buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ st_sensors_get_buffer_element(indio_dev, buffer_data);
+ kfree(buffer_data);
+
+allocate_memory_error:
+ return 0;
+}
+
+const struct iio_trigger_ops st_magn_trigger_ops = {
+ .owner = THIS_MODULE,
+ .try_reenable = &st_magn_trig_try_reenable,
+};
+
+int st_magn_probe_trigger(struct iio_dev *indio_dev)
+{
+ return st_sensors_allocate_trigger(indio_dev, &st_magn_trigger_ops);
+}
+EXPORT_SYMBOL(st_magn_probe_trigger);
+
+void st_magn_remove_trigger(struct iio_dev *indio_dev)
+{
+ st_sensors_deallocate_trigger(indio_dev);
+}
+EXPORT_SYMBOL(st_magn_remove_trigger);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics magnetometers trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/magnetometer/st_magn.h b/include/linux/iio/magnetometer/st_magn.h
new file mode 100644
index 0000000..2bb06e3
--- /dev/null
+++ b/include/linux/iio/magnetometer/st_magn.h
@@ -0,0 +1,49 @@
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_MAGN_H
+#define ST_MAGN_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLHC_MAGN_DEV_NAME "lsm303dlhc_magn"
+#define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn"
+#define LIS3MDL_MAGN_DEV_NAME "lis3mdl"
+
+int st_magn_common_probe(struct iio_dev *indio_dev);
+void st_magn_common_remove(struct iio_dev *indio_dev);
+int st_magn_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_magn_set_enable(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_magn_probe_trigger(struct iio_dev *indio_dev);
+void st_magn_remove_trigger(struct iio_dev *indio_dev);
+int st_magn_allocate_ring(struct iio_dev *indio_dev);
+void st_magn_deallocate_ring(struct iio_dev *indio_dev);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_magn_probe_trigger(struct iio_dev *indio_dev, int irq)
+{
+ return 0;
+}
+static inline void st_magn_remove_trigger(struct iio_dev *indio_dev, int irq)
+{
+ return;
+}
+static inline int st_magn_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_magn_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_MAGN_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: STMicroelectronics sensors driver
2012-12-13 13:11 STMicroelectronics sensors driver Denis CIOCCA
` (3 preceding siblings ...)
2012-12-13 13:11 ` [PATCH 4/4] iio:magnetometer: Add STMicroelectronics magnetometers driver Denis CIOCCA
@ 2012-12-16 11:28 ` Jonathan Cameron
4 siblings, 0 replies; 15+ messages in thread
From: Jonathan Cameron @ 2012-12-16 11:28 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: lars, linux-iio
On 12/13/2012 01:11 PM, Denis CIOCCA wrote:
> Hi Jonathan & Lars-Peter,
>
> I wrote this new patch to include the common library and device drivers
> for accel, magn and gyro.
> I didn't looked still for tx and rx buffers issue because I have to study
> better the problem.
Sure, though in this case it is just a case of making sure the cacheline
aligned elements are at the end of the structure.
> What do you think about this library?
>
Couple of general things to do.
Run one or more static checkers over the code before posting (just saves time
in review by clearing out some standard issues)
(good choices are sparse, smatch and coccicheck (coccinelle wrapper)).
Sparse gives:
drivers/iio/accel/st_accel_trigger.c:25:5: warning: symbol 'st_accel_trig_acc_set_state' was not declared. Should it be
static?
drivers/iio/accel/st_accel_trigger.c:49:30: warning: symbol 'st_accel_trigger_ops' was not declared. Should it be static?
CC [M] drivers/iio/accel/st_accel_trigger.o
CHECK drivers/iio/accel/st_accel_buffer.c
CC [M] drivers/iio/accel/st_accel_buffer.o
CHECK drivers/iio/accel/st_accel_core.c
CC [M] drivers/iio/accel/st_accel_core.o
LD [M] drivers/iio/accel/st_accel.o
CHECK drivers/iio/common/st_sensors/st_sensors_core.c
CC [M] drivers/iio/common/st_sensors/st_sensors_core.o
drivers/iio/common/st_sensors/st_sensors_core.c: In function 'st_sensors_set_enable':
drivers/iio/common/st_sensors/st_sensors_core.c:182:27: warning: 'odr_out.hz' may be used uninitialized in this function
CHECK drivers/iio/common/st_sensors/st_sensors_i2c.c
drivers/iio/common/st_sensors/st_sensors_i2c.c:21:14: warning: symbol 'st_sensors_i2c_get_irq' was not declared. Should
it be static?
CC [M] drivers/iio/common/st_sensors/st_sensors_i2c.o
CHECK drivers/iio/common/st_sensors/st_sensors_spi.c
drivers/iio/common/st_sensors/st_sensors_spi.c:22:14: warning: symbol 'st_sensors_spi_get_irq' was not declared. Should
it be static?
CC [M] drivers/iio/common/st_sensors/st_sensors_spi.o
CHECK drivers/iio/common/st_sensors/st_sensors_trigger.c
CC [M] drivers/iio/common/st_sensors/st_sensors_trigger.o
CHECK drivers/iio/common/st_sensors/st_sensors_buffer.c
CC [M] drivers/iio/common/st_sensors/st_sensors_buffer.o
LD [M] drivers/iio/common/st_sensors/st_sensors_triggered_buffer.o
CHECK drivers/iio/gyro/st_gyro_i2c.c
CC [M] drivers/iio/gyro/st_gyro_i2c.o
CHECK drivers/iio/gyro/st_gyro_spi.c
CC [M] drivers/iio/gyro/st_gyro_spi.o
CHECK drivers/iio/gyro/st_gyro_trigger.c
drivers/iio/gyro/st_gyro_trigger.c:23:5: warning: symbol 'st_gyro_trig_acc_set_state' was not declared. Should it be static?
drivers/iio/gyro/st_gyro_trigger.c:47:30: warning: symbol 'st_gyro_trigger_ops' was not declared. Should it be static?
CC [M] drivers/iio/gyro/st_gyro_trigger.o
CHECK drivers/iio/gyro/st_gyro_buffer.c
CC [M] drivers/iio/gyro/st_gyro_buffer.o
CHECK drivers/iio/gyro/st_gyro_core.c
drivers/iio/gyro/st_gyro_core.c:95:28: warning: symbol 'st_gyro_16bit_channels' was not declared. Should it be static?
CC [M] drivers/iio/gyro/st_gyro_core.o
LD [M] drivers/iio/gyro/st_gyro.o
CHECK drivers/iio/magnetometer/st_magn_i2c.c
CC [M] drivers/iio/magnetometer/st_magn_i2c.o
CHECK drivers/iio/magnetometer/st_magn_spi.c
CC [M] drivers/iio/magnetometer/st_magn_spi.o
CHECK drivers/iio/magnetometer/st_magn_trigger.c
drivers/iio/magnetometer/st_magn_trigger.c:43:30: warning: symbol 'st_magn_trigger_ops' was not declared. Should it be
static?
CC [M] drivers/iio/magnetometer/st_magn_trigger.o
CHECK drivers/iio/magnetometer/st_magn_buffer.c
CC [M] drivers/iio/magnetometer/st_magn_buffer.o
CHECK drivers/iio/magnetometer/st_magn_core.c
CC [M] drivers/iio/magnetometer/st_magn_core.o
LD [M] drivers/iio/magnetometer/st_magn.o
Kernel: arch/arm/boot/Image is ready
Kernel: arch/arm/boot/zImage is ready
Building modules, stage 2.
MODPOST 226 modules
Coccinelle picks up various things including...
drivers/iio/common/st_sensors/st_sensors_spi.c:67:1-7: preceding lock on line 49
(basically you don't release the mutex on an error path).
Anyhow, these tools are a great help in catching some
types of problems.
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-08 16:30 iio: STMicroelectronics iio drivers Denis CIOCCA
@ 2013-01-08 16:30 ` Denis CIOCCA
0 siblings, 0 replies; 15+ messages in thread
From: Denis CIOCCA @ 2013-01-08 16:30 UTC (permalink / raw)
To: jic23, lars, linux-iio; +Cc: Denis Ciocca
This patch adds generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/Kconfig | 41 +++
drivers/iio/accel/Makefile | 6 +
drivers/iio/accel/st_accel_buffer.c | 119 +++++++
drivers/iio/accel/st_accel_core.c | 652 +++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 +++++
drivers/iio/accel/st_accel_spi.c | 86 +++++
include/linux/iio/accel/st_accel.h | 48 +++
7 files changed, 1039 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 include/linux/iio/accel/st_accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index fe4bcd7..013311f 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -13,4 +13,45 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select ST_SENSORS_CORE
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, the module
+ will be called st_accel.
+
+config ST_ACCEL_3AXIS_I2C
+ tristate "support I2C bus connection"
+ depends on ST_ACCEL_3AXIS && I2C
+ select ST_SENSORS_I2C
+ help
+ Say yes here to build I2C support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_i2c.
+
+config ST_ACCEL_3AXIS_SPI
+ tristate "support SPI bus connection"
+ depends on ST_ACCEL_3AXIS && SPI_MASTER
+ select ST_SENSORS_SPI
+ help
+ Say yes here to build SPI support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_spi.
+
+config ST_ACCEL_3AXIS_TRIGGERED_BUFFER
+ tristate "support triggered buffer"
+ depends on ST_ACCEL_3AXIS
+ select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ select ST_SENSORS_TRIGGERED_BUFFER
+ help
+ Default trigger and buffer for STMicroelectronics accelerometers driver.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..53fd7fb 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,9 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+st_accel-y := st_accel_core.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_I2C) += st_accel_i2c.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_SPI) += st_accel_spi.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_TRIGGERED_BUFFER) += st_accel_buffer.o
+obj-$(CONFIG_ST_ACCEL_3AXIS) += st_accel.o
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..4764d21
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+EXPORT_SYMBOL(st_accel_trig_set_state);
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_accel_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_accel_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..4e7108a
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,652 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_N_BIT 4
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_N_BIT 2
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_N_BIT 2
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_PW_N_BIT 3
+#define ST_ACCEL_2_FS_N_BIT 2
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_N_BIT 4
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_N_BIT 3
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLH_ACCEL_DEV_NAME,
+ [2] = LSM303DLHC_ACCEL_DEV_NAME,
+ [3] = LSM330D_ACCEL_DEV_NAME,
+ [4] = LSM330DL_ACCEL_DEV_NAME,
+ [5] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .num_bit = ST_ACCEL_1_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .num_bit = ST_ACCEL_2_ODR_N_BIT,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .num_bit = ST_ACCEL_2_PW_N_BIT,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .num_bit = ST_ACCEL_2_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .num_bit = ST_ACCEL_3_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ err = st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], true);
+ if (err < 0)
+ goto read_error;
+
+ msleep((st_accel_sensors[adata->index].bootime * 1000)
+ / adata->odr);
+ err = st_sensors_read_axis_data(indio_dev,
+ ch->address, val);
+ if (err < 0)
+ goto read_error;
+
+ *val = *val >> ch->scan_type.shift;
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_accel_sensors[adata->index], val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_accel_sensors[adata->index], state);
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_accel_sensors[adata->index], active_bit);
+}
+EXPORT_SYMBOL(st_accel_set_axis_enable);
+
+static int st_accel_check_device_support(struct iio_dev *indio_dev)
+{
+ int i, n, err;
+ u8 wai;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = adata->tf->read_byte(&adata->tb, adata->dev,
+ ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
+ goto read_wai_error;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors); i++) {
+ if (st_accel_sensors[i].wai == wai)
+ break;
+ }
+ if (i == ARRAY_SIZE(st_accel_sensors))
+ goto device_not_supported;
+
+ for (n = 0; n < ARRAY_SIZE(st_accel_sensors[i].sensors_supported);
+ n++) {
+ if (strcmp(indio_dev->name,
+ &st_accel_sensors[i].sensors_supported[n][0]) == 0)
+ break;
+ }
+ if (n == ARRAY_SIZE(st_accel_sensors[i].sensors_supported)) {
+ dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n");
+ goto sensor_name_mismatch;
+ }
+
+ adata->index = i;
+
+ return i;
+
+device_not_supported:
+ dev_err(&indio_dev->dev, "device not supported: WhoAmI (0x%x).\n", wai);
+sensor_name_mismatch:
+ err = -ENODEV;
+read_wai_error:
+ return err;
+}
+
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], enable);
+}
+EXPORT_SYMBOL(st_accel_set_enable);
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_accel_sensors[adata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_scale_avl(indio_dev,
+ st_accel_sensors[adata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_accel_sensors[adata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_accel_sysfs_sampling_frequency_avail);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ st_accel_sysfs_scale_avail, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ err = st_accel_check_device_support(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &st_accel_sensors[adata->index].fs.fs_avl[0];
+ adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ &st_accel_trig_set_state, NULL);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ return err;
+
+st_accel_device_register_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..d1000e8
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..011cc58
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,86 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..7c4c5df
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,48 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-09 12:06 iio: STMicroelectronics iio drivers bugfix Denis CIOCCA
@ 2013-01-09 12:06 ` Denis CIOCCA
0 siblings, 0 replies; 15+ messages in thread
From: Denis CIOCCA @ 2013-01-09 12:06 UTC (permalink / raw)
To: jic23, lars, linux-iio; +Cc: Denis Ciocca
This patch adds generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/Kconfig | 41 +++
drivers/iio/accel/Makefile | 6 +
drivers/iio/accel/st_accel_buffer.c | 119 +++++++
drivers/iio/accel/st_accel_core.c | 652 +++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 +++++
drivers/iio/accel/st_accel_spi.c | 86 +++++
include/linux/iio/accel/st_accel.h | 48 +++
7 files changed, 1039 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 include/linux/iio/accel/st_accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 05e996f..ab67379 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -14,4 +14,45 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, the module
+ will be called st_accel.
+
+config IIO_ST_ACCEL_3AXIS_I2C
+ tristate "support I2C bus connection"
+ depends on IIO_ST_ACCEL_3AXIS && I2C
+ select IIO_ST_SENSORS_I2C
+ help
+ Say yes here to build I2C support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_i2c.
+
+config IIO_ST_ACCEL_3AXIS_SPI
+ tristate "support SPI bus connection"
+ depends on IIO_ST_ACCEL_3AXIS && SPI_MASTER
+ select IIO_ST_SENSORS_SPI
+ help
+ Say yes here to build SPI support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_spi.
+
+config IIO_ST_ACCEL_3AXIS_TRIGGERED_BUFFER
+ tristate "support triggered buffer"
+ depends on IIO_ST_ACCEL_3AXIS
+ select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ select IIO_ST_SENSORS_TRIGGERED_BUFFER
+ help
+ Default trigger and buffer for STMicroelectronics accelerometers driver.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..bb1fa7e 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,9 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+st_accel-y := st_accel_core.o
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS_I2C) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS_SPI) += st_accel_spi.o
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS_TRIGGERED_BUFFER) += st_accel_buffer.o
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..4764d21
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+EXPORT_SYMBOL(st_accel_trig_set_state);
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_accel_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_accel_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..4e7108a
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,652 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_N_BIT 4
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_N_BIT 2
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_N_BIT 2
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_PW_N_BIT 3
+#define ST_ACCEL_2_FS_N_BIT 2
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_N_BIT 4
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_N_BIT 3
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLH_ACCEL_DEV_NAME,
+ [2] = LSM303DLHC_ACCEL_DEV_NAME,
+ [3] = LSM330D_ACCEL_DEV_NAME,
+ [4] = LSM330DL_ACCEL_DEV_NAME,
+ [5] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .num_bit = ST_ACCEL_1_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .num_bit = ST_ACCEL_2_ODR_N_BIT,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .num_bit = ST_ACCEL_2_PW_N_BIT,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .num_bit = ST_ACCEL_2_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .num_bit = ST_ACCEL_3_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ err = st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], true);
+ if (err < 0)
+ goto read_error;
+
+ msleep((st_accel_sensors[adata->index].bootime * 1000)
+ / adata->odr);
+ err = st_sensors_read_axis_data(indio_dev,
+ ch->address, val);
+ if (err < 0)
+ goto read_error;
+
+ *val = *val >> ch->scan_type.shift;
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_accel_sensors[adata->index], val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_accel_sensors[adata->index], state);
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_accel_sensors[adata->index], active_bit);
+}
+EXPORT_SYMBOL(st_accel_set_axis_enable);
+
+static int st_accel_check_device_support(struct iio_dev *indio_dev)
+{
+ int i, n, err;
+ u8 wai;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = adata->tf->read_byte(&adata->tb, adata->dev,
+ ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
+ goto read_wai_error;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors); i++) {
+ if (st_accel_sensors[i].wai == wai)
+ break;
+ }
+ if (i == ARRAY_SIZE(st_accel_sensors))
+ goto device_not_supported;
+
+ for (n = 0; n < ARRAY_SIZE(st_accel_sensors[i].sensors_supported);
+ n++) {
+ if (strcmp(indio_dev->name,
+ &st_accel_sensors[i].sensors_supported[n][0]) == 0)
+ break;
+ }
+ if (n == ARRAY_SIZE(st_accel_sensors[i].sensors_supported)) {
+ dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n");
+ goto sensor_name_mismatch;
+ }
+
+ adata->index = i;
+
+ return i;
+
+device_not_supported:
+ dev_err(&indio_dev->dev, "device not supported: WhoAmI (0x%x).\n", wai);
+sensor_name_mismatch:
+ err = -ENODEV;
+read_wai_error:
+ return err;
+}
+
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], enable);
+}
+EXPORT_SYMBOL(st_accel_set_enable);
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_accel_sensors[adata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_scale_avl(indio_dev,
+ st_accel_sensors[adata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_accel_sensors[adata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_accel_sysfs_sampling_frequency_avail);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ st_accel_sysfs_scale_avail, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ err = st_accel_check_device_support(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &st_accel_sensors[adata->index].fs.fs_avl[0];
+ adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ &st_accel_trig_set_state, NULL);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ return err;
+
+st_accel_device_register_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..d1000e8
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..011cc58
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,86 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..7c4c5df
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,48 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-18 9:31 STMicroelectronics drivers bugfix Denis CIOCCA
@ 2013-01-18 9:31 ` Denis CIOCCA
0 siblings, 0 replies; 15+ messages in thread
From: Denis CIOCCA @ 2013-01-18 9:31 UTC (permalink / raw)
To: jic23, lars, linux-iio; +Cc: Denis Ciocca
This patch adds a generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/Kconfig | 19 ++
drivers/iio/accel/Makefile | 14 +
drivers/iio/accel/st_accel_buffer.c | 119 +++++++
drivers/iio/accel/st_accel_core.c | 641 ++++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 +++++
drivers/iio/accel/st_accel_spi.c | 86 +++++
include/linux/iio/accel/st_accel.h | 52 +++
7 files changed, 1018 insertions(+)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 include/linux/iio/accel/st_accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 05e996f..1fbc490 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -14,4 +14,23 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, will be created
+ these modules:
+ - st_accel_core (core functions for the driver [it is mandatory]);
+ - st_accel_i2c (necessary for the I2C devices [optional*]);
+ - st_accel_spi (necessary for the SPI devices [optional*]);
+ - st_accel_buffer (necessary for triggered buffer [optional]);
+
+ (*) one of these is necessary to do something.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..0b1ecf5 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,17 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+ifneq ($(CONFIG_IIO_BUFFER),)
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel_buffer.o
+endif
+
+ifneq ($(CONFIG_I2C),)
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel_i2c.o
+endif
+
+ifneq ($(CONFIG_SPI_MASTER),)
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel_spi.o
+endif
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel_core.o
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..ac90903
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+EXPORT_SYMBOL(st_accel_trig_set_state);
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_accel_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_accel_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..d400c26
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,641 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLH_ACCEL_DEV_NAME,
+ [2] = LSM303DLHC_ACCEL_DEV_NAME,
+ [3] = LSM330D_ACCEL_DEV_NAME,
+ [4] = LSM330DL_ACCEL_DEV_NAME,
+ [5] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ err = st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], true);
+ if (err < 0)
+ goto read_error;
+
+ msleep((st_accel_sensors[adata->index].bootime * 1000)
+ / adata->odr);
+ err = st_sensors_read_axis_data(indio_dev,
+ ch->address, val);
+ if (err < 0)
+ goto read_error;
+
+ *val = *val >> ch->scan_type.shift;
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_accel_sensors[adata->index], val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_accel_sensors[adata->index], state);
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_accel_sensors[adata->index], active_bit);
+}
+EXPORT_SYMBOL(st_accel_set_axis_enable);
+
+static int st_accel_check_device_support(struct iio_dev *indio_dev)
+{
+ int i, n, err;
+ u8 wai;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = adata->tf->read_byte(&adata->tb, adata->dev,
+ ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
+ goto read_wai_error;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors); i++) {
+ if (st_accel_sensors[i].wai == wai)
+ break;
+ }
+ if (i == ARRAY_SIZE(st_accel_sensors))
+ goto device_not_supported;
+
+ for (n = 0; n < ARRAY_SIZE(st_accel_sensors[i].sensors_supported);
+ n++) {
+ if (strcmp(indio_dev->name,
+ &st_accel_sensors[i].sensors_supported[n][0]) == 0)
+ break;
+ }
+ if (n == ARRAY_SIZE(st_accel_sensors[i].sensors_supported)) {
+ dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n");
+ goto sensor_name_mismatch;
+ }
+
+ adata->index = i;
+
+ return i;
+
+device_not_supported:
+ dev_err(&indio_dev->dev, "device not supported: WhoAmI (0x%x).\n", wai);
+sensor_name_mismatch:
+ err = -ENODEV;
+read_wai_error:
+ return err;
+}
+
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], enable);
+}
+EXPORT_SYMBOL(st_accel_set_enable);
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_accel_sensors[adata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_scale_avl(indio_dev,
+ st_accel_sensors[adata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_accel_sensors[adata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_accel_sysfs_sampling_frequency_avail);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ st_accel_sysfs_scale_avail, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+static struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &st_accel_trig_set_state,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ err = st_accel_check_device_support(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &st_accel_sensors[adata->index].fs.fs_avl[0];
+ adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ &st_accel_trigger_ops);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ return err;
+
+st_accel_device_register_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..e782717
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..92e78ba
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,86 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..e30d1e3
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,52 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+static inline int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ return 0;
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
--
1.8.0.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-18 16:58 STMicroelectronics drivers Denis CIOCCA
@ 2013-01-18 16:58 ` Denis CIOCCA
0 siblings, 0 replies; 15+ messages in thread
From: Denis CIOCCA @ 2013-01-18 16:58 UTC (permalink / raw)
To: jic23, lars, linux-iio; +Cc: Denis Ciocca
This patch adds a generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/Kconfig | 35 +++
drivers/iio/accel/Makefile | 5 +
drivers/iio/accel/st_accel_buffer.c | 119 ++++++++
drivers/iio/accel/st_accel_core.c | 582 ++++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 ++++++
drivers/iio/accel/st_accel_spi.c | 86 ++++++
include/linux/iio/accel/st_accel.h | 52 ++++
7 files changed, 966 insertions(+)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 include/linux/iio/accel/st_accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 05e996f..ba0a7a4 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -14,4 +14,39 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+ select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, will be created
+ these modules:
+ - st_accel_core (core functions for the driver [it is mandatory]);
+ - st_accel_i2c (necessary for the I2C devices [optional*]);
+ - st_accel_spi (necessary for the SPI devices [optional*]);
+ - st_accel_buffer (necessary for triggered buffer [optional]);
+
+ (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+
+config IIO_ST_ACCEL_SPI_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+
+config IIO_ST_ACCEL_BUFFER
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on (IIO_ST_ACCEL_I2C_3AXIS || IIO_ST_ACCEL_SPI_3AXIS)
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..cb139f1 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,8 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel_core.o
+obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
+obj-$(CONFIG_IIO_ST_ACCEL_BUFFER) += st_accel_buffer.o
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..ac90903
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+EXPORT_SYMBOL(st_accel_trig_set_state);
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_accel_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_accel_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..4c32a4d
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,582 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLH_ACCEL_DEV_NAME,
+ [2] = LSM303DLHC_ACCEL_DEV_NAME,
+ [3] = LSM330D_ACCEL_DEV_NAME,
+ [4] = LSM330DL_ACCEL_DEV_NAME,
+ [5] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_accel_sensors[adata->index], val2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_accel_sensors[adata->index], state);
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_accel_sensors[adata->index], active_bit);
+}
+EXPORT_SYMBOL(st_accel_set_axis_enable);
+
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], enable);
+}
+EXPORT_SYMBOL(st_accel_set_enable);
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_accel_sensors[adata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_scale_avl(indio_dev,
+ st_accel_sensors[adata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_accel_sensors[adata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_accel_sysfs_sampling_frequency_avail);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ st_accel_sysfs_scale_avail, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+static struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &st_accel_trig_set_state,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &st_accel_sensors[adata->index].fs.fs_avl[0];
+ adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ &st_accel_trigger_ops);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ return err;
+
+st_accel_device_register_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..e782717
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..92e78ba
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,86 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..e30d1e3
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,52 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+static inline int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ return 0;
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
--
1.8.0.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-21 8:36 STMicroelectronics driver kconfig-makefile bugfix Denis CIOCCA
@ 2013-01-21 8:36 ` Denis CIOCCA
2013-01-23 9:45 ` Lars-Peter Clausen
0 siblings, 1 reply; 15+ messages in thread
From: Denis CIOCCA @ 2013-01-21 8:36 UTC (permalink / raw)
To: jic23; +Cc: lars, linux-iio, Denis Ciocca
This patch adds a generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/Kconfig | 32 ++
drivers/iio/accel/Makefile | 7 +
drivers/iio/accel/st_accel_buffer.c | 119 ++++++++
drivers/iio/accel/st_accel_core.c | 582 ++++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 ++++++
drivers/iio/accel/st_accel_spi.c | 86 ++++++
include/linux/iio/accel/st_accel.h | 52 ++++
7 files changed, 965 insertions(+)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 include/linux/iio/accel/st_accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 05e996f..892e86c 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -14,4 +14,36 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+ select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, will be created
+ these modules:
+ - st_accel (core functions for the driver [it is mandatory]);
+ - st_accel_i2c (necessary for the I2C devices [optional*]);
+ - st_accel_spi (necessary for the SPI devices [optional*]);
+ - st_accel_buffer (necessary for triggered buffer [optional]);
+
+ (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_ACCEL_SPI_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_SPI
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..4fad4bc 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,10 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
+st_accel-y := st_accel_core.o
+st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..ac90903
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+EXPORT_SYMBOL(st_accel_trig_set_state);
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_accel_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_accel_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_axis_enable(indio_dev,
+ ST_SENSORS_ENABLE_ALL_CHANNELS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_accel_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..4c32a4d
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,582 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLH_ACCEL_DEV_NAME,
+ [2] = LSM303DLHC_ACCEL_DEV_NAME,
+ [3] = LSM330D_ACCEL_DEV_NAME,
+ [4] = LSM330DL_ACCEL_DEV_NAME,
+ [5] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev,
+ &st_accel_sensors[adata->index], val2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_dataready_irq(indio_dev,
+ &st_accel_sensors[adata->index], state);
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_axis_enable(indio_dev,
+ &st_accel_sensors[adata->index], active_bit);
+}
+EXPORT_SYMBOL(st_accel_set_axis_enable);
+
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_set_enable(indio_dev,
+ &st_accel_sensors[adata->index], enable);
+}
+EXPORT_SYMBOL(st_accel_set_enable);
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int odr;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &odr);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_sensors_set_odr(indio_dev,
+ &st_accel_sensors[adata->index], odr);
+ mutex_unlock(&indio_dev->mlock);
+
+conversion_error:
+ return err < 0 ? err : size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_scale_avl(indio_dev,
+ st_accel_sensors[adata->index].fs.fs_avl, buf);
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ return st_sensors_get_sampling_frequency_avl(indio_dev,
+ st_accel_sensors[adata->index].odr.odr_avl, buf);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_accel_sysfs_sampling_frequency_avail);
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
+ st_accel_sysfs_scale_avail, NULL , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+static struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &st_accel_trig_set_state,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &st_accel_sensors[adata->index].fs.fs_avl[0];
+ adata->odr = st_accel_sensors[adata->index].odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev,
+ &st_accel_sensors[adata->index]);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ &st_accel_trigger_ops);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ return err;
+
+st_accel_device_register_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..f225a42
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..57e661f
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,86 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/accel/st_accel.h b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..e30d1e3
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,52 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include "../common/st_sensors.h"
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state);
+int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit);
+int st_accel_set_enable(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+static inline int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ return 0;
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
--
1.8.0.3
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-21 8:36 ` [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver Denis CIOCCA
@ 2013-01-23 9:45 ` Lars-Peter Clausen
0 siblings, 0 replies; 15+ messages in thread
From: Lars-Peter Clausen @ 2013-01-23 9:45 UTC (permalink / raw)
To: Denis CIOCCA; +Cc: jic23, linux-iio
Same comments apply to the gyro and magnetometer driver
[...]
> diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
> new file mode 100644
> index 0000000..ac90903
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_buffer.c
> @@ -0,0 +1,119 @@
> +/*
> + * STMicroelectronics accelerometers driver
> + *
> + * Copyright 2012-2013 STMicroelectronics Inc.
> + *
> + * Denis Ciocca <denis.ciocca@st.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/stat.h>
> +#include <linux/interrupt.h>
> +#include <linux/byteorder/generic.h>
Never include this file directly. Use asm/byteorder.h instead. But I don't
think you need it here anyway, so just drop it
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#include <linux/iio/accel/st_accel.h>
> +#include <linux/iio/common/st_sensors.h>
> +
[...]
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> new file mode 100644
> index 0000000..4c32a4d
> --- /dev/null
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -0,0 +1,582 @@
[..]
> +static int st_accel_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *ch, int *val,
> + int *val2, long mask)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + err = st_sensors_read_info_raw(indio_dev, ch, val,
> + &st_accel_sensors[adata->index]);
> + if (err < 0)
> + goto read_error;
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = 0;
> + *val2 = adata->current_fullscale->gain;
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + return -EINVAL;
> + }
> +
> +read_error:
> + return err;
> +}
> +
> +static int st_accel_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2, long mask)
> +{
> + int err;
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + err = st_sensors_set_fullscale_by_gain(indio_dev,
> + &st_accel_sensors[adata->index], val2);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return err;
> +}
> +
> +int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool state)
> +{
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_set_dataready_irq(indio_dev,
> + &st_accel_sensors[adata->index], state);
> +}
> +EXPORT_SYMBOL(st_accel_set_dataready_irq);
> +
> +int st_accel_set_axis_enable(struct iio_dev *indio_dev, u8 active_bit)
> +{
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_set_axis_enable(indio_dev,
> + &st_accel_sensors[adata->index], active_bit);
> +}
> +EXPORT_SYMBOL(st_accel_set_axis_enable);
> +
> +int st_accel_set_enable(struct iio_dev *indio_dev, bool enable)
> +{
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_set_enable(indio_dev,
> + &st_accel_sensors[adata->index], enable);
> +}
> +EXPORT_SYMBOL(st_accel_set_enable);
> +
> +static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + int err;
> + unsigned int odr;
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + err = kstrtoint(buf, 10, &odr);
> + if (err < 0)
> + goto conversion_error;
> +
> + mutex_lock(&indio_dev->mlock);
> + err = st_sensors_set_odr(indio_dev,
> + &st_accel_sensors[adata->index], odr);
> + mutex_unlock(&indio_dev->mlock);
> +
> +conversion_error:
> + return err < 0 ? err : size;
> +}
> +
> +static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return sprintf(buf, "%d\n", adata->odr);
> +}
> +
> +static ssize_t st_accel_sysfs_scale_avail(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_get_scale_avl(indio_dev,
> + st_accel_sensors[adata->index].fs.fs_avl, buf);
> +}
> +
> +static ssize_t st_accel_sysfs_sampling_frequency_avail(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct st_sensor_data *adata = iio_priv(indio_dev);
> +
> + return st_sensors_get_sampling_frequency_avl(indio_dev,
> + st_accel_sensors[adata->index].odr.odr_avl, buf);
> +}
> +
> +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_accel_sysfs_sampling_frequency_avail);
> +
> +static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
> + st_accel_sysfs_scale_avail, NULL , 0);
> +
> +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
> + st_accel_sysfs_get_sampling_frequency,
> + st_accel_sysfs_set_sampling_frequency);
> +
> +static struct attribute *st_accel_attributes[] = {
> + &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
> + &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
> + &iio_dev_attr_sampling_frequency.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group st_accel_attribute_group = {
> + .attrs = st_accel_attributes,
> +};
> +
Still lots of duplication here. But wellm w
> +static const struct iio_info accel_info = {
> + .driver_module = THIS_MODULE,
> + .attrs = &st_accel_attribute_group,
> + .read_raw = &st_accel_read_raw,
> + .write_raw = &st_accel_write_raw,
> +};
> +
> +static struct iio_trigger_ops st_accel_trigger_ops = {
const
> + .owner = THIS_MODULE,
> + .set_trigger_state = &st_accel_trig_set_state,
Does this work if CONFIG_IIO_BUFFER is disabled? st_accel_trig_set_state is
a static inline in that case. I'd move st_accel_trigger_ops to the
st_accel_buffer.c and add a #define st_accel_trigger_ops NULL for the case
where IIO_BUFFER is not selected.
> +};
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/4] iio:accel: Add STMicroelectronics accelerometers driver
2013-01-25 23:44 STMicroelectronics IIO driver Denis Ciocca
@ 2013-01-25 23:44 ` Denis Ciocca
0 siblings, 0 replies; 15+ messages in thread
From: Denis Ciocca @ 2013-01-25 23:44 UTC (permalink / raw)
To: denis.ciocca, jic23, lars, linux-iio; +Cc: Denis Ciocca
This patch adds a generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/accel/Kconfig | 31 +++
drivers/iio/accel/Makefile | 7 +
drivers/iio/accel/st_accel.h | 47 ++++
drivers/iio/accel/st_accel_buffer.c | 114 ++++++++
drivers/iio/accel/st_accel_core.c | 495 +++++++++++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 ++++++
drivers/iio/accel/st_accel_spi.c | 86 ++++++
7 files changed, 867 insertions(+)
create mode 100644 drivers/iio/accel/st_accel.h
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 05e996f..e8d6b2e 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -14,4 +14,35 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config IIO_ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+ select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, will be created
+ these modules:
+ - st_accel (core functions for the driver [it is mandatory]);
+ - st_accel_i2c (necessary for the I2C devices [optional*]);
+ - st_accel_spi (necessary for the SPI devices [optional*]);
+
+ (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_ACCEL_SPI_3AXIS
+ tristate
+ depends on IIO_ST_ACCEL_3AXIS
+ depends on IIO_ST_SENSORS_SPI
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..4fad4bc 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,10 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
+st_accel-y := st_accel_core.o
+st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
new file mode 100644
index 0000000..37949b9
--- /dev/null
+++ b/drivers/iio/accel/st_accel.h
@@ -0,0 +1,47 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_ACCEL_TRIGGER_SET_STATE (&st_accel_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_ACCEL_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..6bd82c7
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,114 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+
+ return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_sensors_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_accel_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+ return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_sensors_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_postenable_error;
+
+ return err;
+
+st_accel_buffer_postenable_error:
+ kfree(adata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+ if (err < 0)
+ goto st_accel_buffer_predisable_error;
+
+ err = st_sensors_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+ kfree(adata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+ .preenable = &st_accel_buffer_preenable,
+ .postenable = &st_accel_buffer_postenable,
+ .predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..a235de2
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,495 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_1_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_1_FS_AVL_8_GAIN IIO_G_TO_M_S_2(4000)
+#define ST_ACCEL_1_FS_AVL_16_GAIN IIO_G_TO_M_S_2(12000)
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x32
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0x18
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_2_PW_ADDR 0x20
+#define ST_ACCEL_2_PW_MASK 0xe0
+#define ST_ACCEL_2_FS_ADDR 0x23
+#define ST_ACCEL_2_FS_MASK 0x30
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_2_GAIN IIO_G_TO_M_S_2(1000)
+#define ST_ACCEL_2_FS_AVL_4_GAIN IIO_G_TO_M_S_2(2000)
+#define ST_ACCEL_2_FS_AVL_8_GAIN IIO_G_TO_M_S_2(3900)
+#define ST_ACCEL_2_BDU_ADDR 0x23
+#define ST_ACCEL_2_BDU_MASK 0x80
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x40
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0xf0
+#define ST_ACCEL_3_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_3_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_3_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_3_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_3_FS_ADDR 0x24
+#define ST_ACCEL_3_FS_MASK 0x38
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_3_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_3_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_3_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_3_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_3_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_3_BDU_ADDR 0x20
+#define ST_ACCEL_3_BDU_MASK 0x08
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_3_IG1_EN_ADDR 0x23
+#define ST_ACCEL_3_IG1_EN_MASK 0x08
+#define ST_ACCEL_3_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3DH_ACCEL_DEV_NAME,
+ [1] = LSM303DLHC_ACCEL_DEV_NAME,
+ [2] = LSM330D_ACCEL_DEV_NAME,
+ [3] = LSM330DL_ACCEL_DEV_NAME,
+ [4] = LSM330DLC_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DLH_ACCEL_DEV_NAME,
+ [1] = LSM303DL_ACCEL_DEV_NAME,
+ [2] = LSM303DLH_ACCEL_DEV_NAME,
+ [3] = LSM303DLM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .odr_avl = {
+ { 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
+ { 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
+ { 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_PW_ADDR,
+ .mask = ST_ACCEL_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM330_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_3_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_3_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_3_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_3_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = adata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_accel_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info accel_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+ .write_raw = &st_accel_write_raw,
+};
+
+static const struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+};
+
+int st_accel_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &accel_info;
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ adata->multiread_bit = adata->sensor->multi_read_bit;
+ indio_dev->channels = adata->sensor->ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ adata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &adata->sensor->fs.fs_avl[0];
+ adata->odr = adata->sensor->odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ &st_accel_trigger_ops);
+ if (err < 0)
+ goto st_accel_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_accel_device_register_error;
+
+ return err;
+
+st_accel_device_register_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_accel_probe_trigger_error:
+ if (adata->get_irq_data_ready(indio_dev) > 0)
+ st_accel_deallocate_ring(indio_dev);
+st_accel_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_common_probe);
+
+void st_accel_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *adata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (adata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..90b8ddf
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,87 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_accel.h"
+
+static int st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_i2c_remove(struct i2c_client *client)
+{
+ st_accel_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = st_accel_i2c_remove,
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..dbd45c0
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,86 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_accel.h"
+
+static int st_accel_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, adata);
+
+ err = st_accel_common_probe(indio_dev);
+ if (err < 0)
+ goto st_accel_common_probe_error;
+
+ return 0;
+
+st_accel_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_accel_spi_remove(struct spi_device *spi)
+{
+ st_accel_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = st_accel_spi_remove,
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 15+ messages in thread