* [PATCH V2 1/3] ARM: tegra: seaboard: enable HDMI port
@ 2013-01-02 21:53 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-02 21:53 UTC (permalink / raw)
To: Stephen Warren
Cc: Marc Dietrich, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
v2: No change.
---
arch/arm/boot/dts/tegra20-seaboard.dts | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 4204598..f9e3ad4 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -345,7 +357,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
- i2c@0 {
+ hdmi_ddc: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -463,13 +475,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 1/3] ARM: tegra: seaboard: enable HDMI port
@ 2013-01-02 21:53 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-02 21:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
v2: No change.
---
arch/arm/boot/dts/tegra20-seaboard.dts | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 4204598..f9e3ad4 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -345,7 +357,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
- i2c at 0 {
+ hdmi_ddc: i2c at 0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -463,13 +475,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 2/3] ARM: tegra: ventana: enable HDMI port
2013-01-02 21:53 ` Stephen Warren
@ 2013-01-02 21:53 ` Stephen Warren
-1 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-02 21:53 UTC (permalink / raw)
To: Stephen Warren
Cc: Marc Dietrich, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
v2: Limit DDC I2C speed to 100KHz.
---
arch/arm/boot/dts/tegra20-ventana.dts | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index adc4754..816eb12 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -320,7 +332,7 @@
i2c@7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
i2cmux {
@@ -335,7 +347,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
- i2c@0 {
+ hdmi_ddc: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -446,13 +458,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 2/3] ARM: tegra: ventana: enable HDMI port
@ 2013-01-02 21:53 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-02 21:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
v2: Limit DDC I2C speed to 100KHz.
---
arch/arm/boot/dts/tegra20-ventana.dts | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index adc4754..816eb12 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -320,7 +332,7 @@
i2c at 7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
i2cmux {
@@ -335,7 +347,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
- i2c at 0 {
+ hdmi_ddc: i2c at 0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -446,13 +458,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 3/3] ARM: tegra: paz00: enable HDMI port
2013-01-02 21:53 ` Stephen Warren
@ 2013-01-02 21:53 ` Stephen Warren
-1 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-02 21:53 UTC (permalink / raw)
To: Stephen Warren
Cc: Marc Dietrich, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
v2: Limit DDC I2C speed to 100KHz.
---
arch/arm/boot/dts/tegra20-paz00.dts | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 6a93d14..80d9635 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x20000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -252,9 +264,9 @@
};
};
- i2c@7000c400 {
+ hdmi_ddc: i2c@7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
nvec {
@@ -367,13 +379,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "+3.3vs_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 3/3] ARM: tegra: paz00: enable HDMI port
@ 2013-01-02 21:53 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-02 21:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
v2: Limit DDC I2C speed to 100KHz.
---
arch/arm/boot/dts/tegra20-paz00.dts | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 6a93d14..80d9635 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x20000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -252,9 +264,9 @@
};
};
- i2c at 7000c400 {
+ hdmi_ddc: i2c at 7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
nvec {
@@ -367,13 +379,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "+3.3vs_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH V2 1/3] ARM: tegra: seaboard: enable HDMI port
2013-01-02 21:53 ` Stephen Warren
@ 2013-01-03 16:51 ` Stephen Warren
-1 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-03 16:51 UTC (permalink / raw)
To: Stephen Warren
Cc: Marc Dietrich, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
On 01/02/2013 02:53 PM, Stephen Warren wrote:
>...
The series, applied to Tegra's for-3.9/dt branch.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH V2 1/3] ARM: tegra: seaboard: enable HDMI port
@ 2013-01-03 16:51 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-01-03 16:51 UTC (permalink / raw)
To: linux-arm-kernel
On 01/02/2013 02:53 PM, Stephen Warren wrote:
>...
The series, applied to Tegra's for-3.9/dt branch.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-01-03 16:51 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-02 21:53 [PATCH V2 1/3] ARM: tegra: seaboard: enable HDMI port Stephen Warren
2013-01-02 21:53 ` Stephen Warren
[not found] ` <1357163602-10777-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-01-02 21:53 ` [PATCH V2 2/3] ARM: tegra: ventana: " Stephen Warren
2013-01-02 21:53 ` Stephen Warren
2013-01-02 21:53 ` [PATCH V2 3/3] ARM: tegra: paz00: " Stephen Warren
2013-01-02 21:53 ` Stephen Warren
2013-01-03 16:51 ` [PATCH V2 1/3] ARM: tegra: seaboard: " Stephen Warren
2013-01-03 16:51 ` Stephen Warren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.