[PATCH 0/3] ARM: OMAP4: Enable AESS IP.

[PATCH 0/3] ARM: OMAP4: Enable AESS IP.

[Sebastien Guiriec]

This patch serie extends the the hwmod HWMOD_EXT_OPT_MAIN_CLK flag for the
AESS IP. This IP has additional register for Auto Gatting configuration. As
it is used only for Audio the driver is not always loaded. We can reuse the
same flag as McPDM to work around the HW problem due to bad reset value of
AESS Auto gatting configuration register. 

If we try to setup and reset AESS during boot time without this serie the
next clocks will still remain enable.

omapconf abe cfg:
|--------------------------------------------------------------|
| ABE        Clock Domain Configuration                        |
|--------------------------------|-----------------------------|
| Clock State Transition control | HW-Auto                     |
| Clock State                    |                             |
|   ABE_24M_FCLK                 | GATED                       |
|   ABE_ALWON_32K_CLK            | GATED                       |
|   ABE_SYSCLK                   | GATED                       |
|   24M_FCLK                     | GATED                       |
|   ABE_ICLK2                    | RUNNING                     |
|   DPLL_ABE_X2_CLK              | RUNNING                     |
|   PAD_CLKS                     | GATED                       |
|   SLIMBUS_CLK                  | GATED                       |
| OPP Divider                    | ABE_CLK = DPLL_ABE_X2_CLK/1 |
|--------------------------------------------------------------|

Sebastien Guiriec (3):
  ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching
    IP block during init
  ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel
    init
  OMAP4: hwmod data: Enable AESS hwmod device

 arch/arm/mach-omap2/omap_hwmod.c           |    2 +-
 arch/arm/mach-omap2/omap_hwmod.h           |   10 ++++++++--
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   16 ++++++++++++----
 3 files changed, 21 insertions(+), 7 deletions(-)

-- 
1.7.10.4

[PATCH 0/3] ARM: OMAP4: Enable AESS IP.

[Sebastien Guiriec]

This patch serie extends the the hwmod HWMOD_EXT_OPT_MAIN_CLK flag for the
AESS IP. This IP has additional register for Auto Gatting configuration. As
it is used only for Audio the driver is not always loaded. We can reuse the
same flag as McPDM to work around the HW problem due to bad reset value of
AESS Auto gatting configuration register. 

If we try to setup and reset AESS during boot time without this serie the
next clocks will still remain enable.

omapconf abe cfg:
|--------------------------------------------------------------|
| ABE        Clock Domain Configuration                        |
|--------------------------------|-----------------------------|
| Clock State Transition control | HW-Auto                     |
| Clock State                    |                             |
|   ABE_24M_FCLK                 | GATED                       |
|   ABE_ALWON_32K_CLK            | GATED                       |
|   ABE_SYSCLK                   | GATED                       |
|   24M_FCLK                     | GATED                       |
|   ABE_ICLK2                    | RUNNING                     |
|   DPLL_ABE_X2_CLK              | RUNNING                     |
|   PAD_CLKS                     | GATED                       |
|   SLIMBUS_CLK                  | GATED                       |
| OPP Divider                    | ABE_CLK = DPLL_ABE_X2_CLK/1 |
|--------------------------------------------------------------|

Sebastien Guiriec (3):
  ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching
    IP block during init
  ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel
    init
  OMAP4: hwmod data: Enable AESS hwmod device

 arch/arm/mach-omap2/omap_hwmod.c           |    2 +-
 arch/arm/mach-omap2/omap_hwmod.h           |   10 ++++++++--
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   16 ++++++++++++----
 3 files changed, 21 insertions(+), 7 deletions(-)

-- 
1.7.10.4

[PATCH 1/3] ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching IP block during init

[Sebastien Guiriec]

Rename HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
dependent on an off-chip functional clock that is not guaranteed to
be present during initialization. Same flag can be use for IP with
additional HW registers to control Auto IDLE mode.

Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod.c           |    2 +-
 arch/arm/mach-omap2/omap_hwmod.h           |   10 ++++++++--
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    2 +-
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 4653efb..640c179 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2447,7 +2447,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
 
-	if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+	if (oh->flags & HWMOD_NO_SETUP_RESET)
 		return -EPERM;
 
 	if (oh->rst_lines_cnt == 0) {
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 3ae852a..ce4bed4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -446,11 +446,17 @@ struct omap_hwmod_omap4_prcm {
  *     in order to complete the reset. Optional clocks will be disabled
  *     again after the reset.
  * HWMOD_16BIT_REG: Module has 16bit registers
- * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ * HWMOD_NO_SETUP_RESET: This flag can be used for 2 problems:
+ *     1) The only main functional clock source for
  *     this IP block comes from an off-chip source and is not always
  *     enabled.  This prevents the hwmod code from being able to
  *     enable and reset the IP block early.  XXX Eventually it should
  *     be possible to query the clock framework for this information.
+ *     2) IP with additional registers for auto gatting control like AESS
+ *     For some IPs we need to set AUTO_GATTING_ENABLE bit. This bit is set
+ *     only when the associated driver is probed. If hwmod is enabling and
+ *     reseting the IP early without setting auto idle bit then clocks are
+ *     not gated.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -461,7 +467,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_IDLEST				(1 << 6)
 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 #define HWMOD_16BIT_REG				(1 << 8)
-#define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
+#define HWMOD_NO_SETUP_RESET			(1 << 9)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d508..b340a4e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2133,7 +2133,7 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_NO_SETUP_RESET,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
-- 
1.7.10.4

[PATCH 1/3] ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching IP block during init

[Sebastien Guiriec]

Rename HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
dependent on an off-chip functional clock that is not guaranteed to
be present during initialization. Same flag can be use for IP with
additional HW registers to control Auto IDLE mode.

Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod.c           |    2 +-
 arch/arm/mach-omap2/omap_hwmod.h           |   10 ++++++++--
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    2 +-
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 4653efb..640c179 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2447,7 +2447,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
 
-	if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+	if (oh->flags & HWMOD_NO_SETUP_RESET)
 		return -EPERM;
 
 	if (oh->rst_lines_cnt == 0) {
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 3ae852a..ce4bed4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -446,11 +446,17 @@ struct omap_hwmod_omap4_prcm {
  *     in order to complete the reset. Optional clocks will be disabled
  *     again after the reset.
  * HWMOD_16BIT_REG: Module has 16bit registers
- * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ * HWMOD_NO_SETUP_RESET: This flag can be used for 2 problems:
+ *     1) The only main functional clock source for
  *     this IP block comes from an off-chip source and is not always
  *     enabled.  This prevents the hwmod code from being able to
  *     enable and reset the IP block early.  XXX Eventually it should
  *     be possible to query the clock framework for this information.
+ *     2) IP with additional registers for auto gatting control like AESS
+ *     For some IPs we need to set AUTO_GATTING_ENABLE bit. This bit is set
+ *     only when the associated driver is probed. If hwmod is enabling and
+ *     reseting the IP early without setting auto idle bit then clocks are
+ *     not gated.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -461,7 +467,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_IDLEST				(1 << 6)
 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 #define HWMOD_16BIT_REG				(1 << 8)
-#define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
+#define HWMOD_NO_SETUP_RESET			(1 << 9)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d508..b340a4e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2133,7 +2133,7 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_NO_SETUP_RESET,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
-- 
1.7.10.4

Re: [PATCH 1/3] ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching IP block during init

[Paul Walmsley]

Hi Sebastien

On Fri, 4 Jan 2013, Sebastien Guiriec wrote:

> Rename HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
> dependent on an off-chip functional clock that is not guaranteed to
> be present during initialization. Same flag can be use for IP with
> additional HW registers to control Auto IDLE mode.
> 
> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>

We already have the HWMOD_NO_INIT_RESET flag.  Wouldn't that accomplish 
the same goal?

Also I think we can reset the AESS during init.  I posted a patch for this 
a few months ago, but looks like it got lost.  Will reply to one of your 
other patches with more details.


- Paul

[PATCH 1/3] ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching IP block during init

[Paul Walmsley]

Hi Sebastien

On Fri, 4 Jan 2013, Sebastien Guiriec wrote:

> Rename HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
> dependent on an off-chip functional clock that is not guaranteed to
> be present during initialization. Same flag can be use for IP with
> additional HW registers to control Auto IDLE mode.
> 
> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>

We already have the HWMOD_NO_INIT_RESET flag.  Wouldn't that accomplish 
the same goal?

Also I think we can reset the AESS during init.  I posted a patch for this 
a few months ago, but looks like it got lost.  Will reply to one of your 
other patches with more details.


- Paul

Re: [PATCH 1/3] ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching IP block during init

[Sebastien Guiriec]

On 01/04/2013 07:19 PM, Paul Walmsley wrote:
> Hi Sebastien
>
> On Fri, 4 Jan 2013, Sebastien Guiriec wrote:
>
>> Rename HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
>> dependent on an off-chip functional clock that is not guaranteed to
>> be present during initialization. Same flag can be use for IP with
>> additional HW registers to control Auto IDLE mode.
>>
>> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
>
> We already have the HWMOD_NO_INIT_RESET flag.  Wouldn't that accomplish
> the same goal?

I am assuming that it was HWMOD_INIT_NO_RESET flag. This is not solving 
the issue. After boot with this mode some of same clocks are still not 
gated.

>
> Also I think we can reset the AESS during init.  I posted a patch for this
> a few months ago, but looks like it got lost.  Will reply to one of your
> other patches with more details.
>
>
> - Paul
>

[PATCH 1/3] ARM: OMAP2+: hwmod: rename flag to prevent hwmod code from touching IP block during init

[Sebastien Guiriec]

On 01/04/2013 07:19 PM, Paul Walmsley wrote:
> Hi Sebastien
>
> On Fri, 4 Jan 2013, Sebastien Guiriec wrote:
>
>> Rename HWMOD_EXT_OPT_MAIN_CLK flag to indicate that this IP block is
>> dependent on an off-chip functional clock that is not guaranteed to
>> be present during initialization. Same flag can be use for IP with
>> additional HW registers to control Auto IDLE mode.
>>
>> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
>
> We already have the HWMOD_NO_INIT_RESET flag.  Wouldn't that accomplish
> the same goal?

I am assuming that it was HWMOD_INIT_NO_RESET flag. This is not solving 
the issue. After boot with this mode some of same clocks are still not 
gated.

>
> Also I think we can reset the AESS during init.  I posted a patch for this
> a few months ago, but looks like it got lost.  Will reply to one of your
> other patches with more details.
>
>
> - Paul
>

[PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Sebastien Guiriec]

The AESS on OMAP4 has additional register on top of SYS_CONFIG for
auto gatting configuration. In order to avoid running clock after
boot up we should avoid to enable and reset the module during boot up.

Audio driver will be in charge of configuring the addition register.

At its core, this patch is a workaround for an OMAP hardware problem.
It should be possible to configure the OMAP with good default reset
configuration of AESS IP for auto gatting mode.

Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index b340a4e..26d6cde 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -346,6 +346,14 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
 	.name		= "aess",
 	.class		= &omap44xx_aess_hwmod_class,
 	.clkdm_name	= "abe_clkdm",
+	/*
+	 * AESS has an internal register on top of SYS_CONFIG for
+	 * AUTO GATTING mode. Unfortunately the reset value of this
+	 * register is not set correctly. So until AESS driver is not
+	 * probe we should not try to control the module during boot up.
+	 * Audio driver will handle the additional register configuration.
+	 */
+	.flags		= HWMOD_NO_SETUP_RESET,
 	.mpu_irqs	= omap44xx_aess_irqs,
 	.sdma_reqs	= omap44xx_aess_sdma_reqs,
 	.main_clk	= "aess_fck",
-- 
1.7.10.4

[PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Sebastien Guiriec]

The AESS on OMAP4 has additional register on top of SYS_CONFIG for
auto gatting configuration. In order to avoid running clock after
boot up we should avoid to enable and reset the module during boot up.

Audio driver will be in charge of configuring the addition register.

At its core, this patch is a workaround for an OMAP hardware problem.
It should be possible to configure the OMAP with good default reset
configuration of AESS IP for auto gatting mode.

Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index b340a4e..26d6cde 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -346,6 +346,14 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
 	.name		= "aess",
 	.class		= &omap44xx_aess_hwmod_class,
 	.clkdm_name	= "abe_clkdm",
+	/*
+	 * AESS has an internal register on top of SYS_CONFIG for
+	 * AUTO GATTING mode. Unfortunately the reset value of this
+	 * register is not set correctly. So until AESS driver is not
+	 * probe we should not try to control the module during boot up.
+	 * Audio driver will handle the additional register configuration.
+	 */
+	.flags		= HWMOD_NO_SETUP_RESET,
 	.mpu_irqs	= omap44xx_aess_irqs,
 	.sdma_reqs	= omap44xx_aess_sdma_reqs,
 	.main_clk	= "aess_fck",
-- 
1.7.10.4

Re: [PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Paul Walmsley]

Hi Sebastien

On Fri, 4 Jan 2013, Sebastien Guiriec wrote:

> The AESS on OMAP4 has additional register on top of SYS_CONFIG for
> auto gatting configuration. In order to avoid running clock after
> boot up we should avoid to enable and reset the module during boot up.
> 
> Audio driver will be in charge of configuring the addition register.
> 
> At its core, this patch is a workaround for an OMAP hardware problem.
> It should be possible to configure the OMAP with good default reset
> configuration of AESS IP for auto gatting mode.
> 
> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>

What do you think about a slightly modified and updated version of:

http://www.mail-archive.com/linux-omap@vger.kernel.org/msg69853.html

?  That way we can reset the IP block at startup, like most of our other 
IP blocks, to avoid previous OS and bootloader dependencies.


- Paul

[PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Paul Walmsley]

Hi Sebastien

On Fri, 4 Jan 2013, Sebastien Guiriec wrote:

> The AESS on OMAP4 has additional register on top of SYS_CONFIG for
> auto gatting configuration. In order to avoid running clock after
> boot up we should avoid to enable and reset the module during boot up.
> 
> Audio driver will be in charge of configuring the addition register.
> 
> At its core, this patch is a workaround for an OMAP hardware problem.
> It should be possible to configure the OMAP with good default reset
> configuration of AESS IP for auto gatting mode.
> 
> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>

What do you think about a slightly modified and updated version of:

http://www.mail-archive.com/linux-omap at vger.kernel.org/msg69853.html

?  That way we can reset the IP block at startup, like most of our other 
IP blocks, to avoid previous OS and bootloader dependencies.


- Paul

Re: [PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Sebastien Guiriec]

On 01/04/2013 07:35 PM, Paul Walmsley wrote:
> Hi Sebastien
>
> On Fri, 4 Jan 2013, Sebastien Guiriec wrote:
>
>> The AESS on OMAP4 has additional register on top of SYS_CONFIG for
>> auto gatting configuration. In order to avoid running clock after
>> boot up we should avoid to enable and reset the module during boot up.
>>
>> Audio driver will be in charge of configuring the addition register.
>>
>> At its core, this patch is a workaround for an OMAP hardware problem.
>> It should be possible to configure the OMAP with good default reset
>> configuration of AESS IP for auto gatting mode.
>>
>> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
>
> What do you think about a slightly modified and updated version of:
>
> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg69853.html

This solution is the better. I was thinking that Tony reject this 
callback (but I realize that I miss the second series long time back).

Paul,
Do you want me to rebase this version and update the serie or are you 
handle it?

>
> ?  That way we can reset the IP block at startup, like most of our other
> IP blocks, to avoid previous OS and bootloader dependencies.

Yes can be useful.

>
>
> - Paul
>

[PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Sebastien Guiriec]

On 01/04/2013 07:35 PM, Paul Walmsley wrote:
> Hi Sebastien
>
> On Fri, 4 Jan 2013, Sebastien Guiriec wrote:
>
>> The AESS on OMAP4 has additional register on top of SYS_CONFIG for
>> auto gatting configuration. In order to avoid running clock after
>> boot up we should avoid to enable and reset the module during boot up.
>>
>> Audio driver will be in charge of configuring the addition register.
>>
>> At its core, this patch is a workaround for an OMAP hardware problem.
>> It should be possible to configure the OMAP with good default reset
>> configuration of AESS IP for auto gatting mode.
>>
>> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
>
> What do you think about a slightly modified and updated version of:
>
> http://www.mail-archive.com/linux-omap at vger.kernel.org/msg69853.html

This solution is the better. I was thinking that Tony reject this 
callback (but I realize that I miss the second series long time back).

Paul,
Do you want me to rebase this version and update the serie or are you 
handle it?

>
> ?  That way we can reset the IP block at startup, like most of our other
> IP blocks, to avoid previous OS and bootloader dependencies.

Yes can be useful.

>
>
> - Paul
>

Re: [PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Paul Walmsley]

Hi

On Fri, 4 Jan 2013, Sebastien Guiriec wrote:

> Paul,
> Do you want me to rebase this version and update the serie or are you handle
> it?

Sure, it would be great if you could take this over and test it and 
repost.

You might find the 'aess_reset_devel_3.9' branch at 
git://git.pwsan.com/linux-2.6 useful.  It's a forward port of some of the 
3.5-rc work.  It's only compile-tested, so you might need to tweak it to 
get it to work.


- Paul

[PATCH 2/3] ARM: OMAP4: hwmod data: do not enable or reset the AESS during kernel init

[Paul Walmsley]

Hi

On Fri, 4 Jan 2013, Sebastien Guiriec wrote:

> Paul,
> Do you want me to rebase this version and update the serie or are you handle
> it?

Sure, it would be great if you could take this over and test it and 
repost.

You might find the 'aess_reset_devel_3.9' branch at 
git://git.pwsan.com/linux-2.6 useful.  It's a forward port of some of the 
3.5-rc work.  It's only compile-tested, so you might need to tweak it to 
get it to work.


- Paul

[PATCH 3/3] OMAP4: hwmod data: Enable AESS hwmod device

[Sebastien Guiriec]

Enable AESS data in hwmod in order to be able to probe
audio driver.

Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 26d6cde..dd60e52 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -6286,7 +6286,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	/* &omap44xx_aess__l4_abe, */
+	&omap44xx_aess__l4_abe,
 	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
@@ -6295,8 +6295,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__l4_wkup,
 	&omap44xx_mpu__mpu_private,
 	&omap44xx_l4_cfg__ocp_wp_noc,
-	/* &omap44xx_l4_abe__aess, */
-	/* &omap44xx_l4_abe__aess_dma, */
+	&omap44xx_l4_abe__aess,
+	&omap44xx_l4_abe__aess_dma,
 	&omap44xx_l3_main_2__c2c,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,
-- 
1.7.10.4

[PATCH 3/3] OMAP4: hwmod data: Enable AESS hwmod device

[Sebastien Guiriec]

Enable AESS data in hwmod in order to be able to probe
audio driver.

Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 26d6cde..dd60e52 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -6286,7 +6286,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	/* &omap44xx_aess__l4_abe, */
+	&omap44xx_aess__l4_abe,
 	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
@@ -6295,8 +6295,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__l4_wkup,
 	&omap44xx_mpu__mpu_private,
 	&omap44xx_l4_cfg__ocp_wp_noc,
-	/* &omap44xx_l4_abe__aess, */
-	/* &omap44xx_l4_abe__aess_dma, */
+	&omap44xx_l4_abe__aess,
+	&omap44xx_l4_abe__aess_dma,
 	&omap44xx_l3_main_2__c2c,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,
-- 
1.7.10.4