All of lore.kernel.org
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 1/3] gpio: pca953x: make the register access by GPIO bank
Date: Tue, 08 Jan 2013 09:32:54 +0100	[thread overview]
Message-ID: <50EBD9B6.3090601@free-electrons.com> (raw)
In-Reply-To: <1357599097-19053-2-git-send-email-gregory.clement@free-electrons.com>

Hi Gregory,

On 07/01/2013 23:51, Gregory CLEMENT wrote:
> -static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
> +static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val,
> +				int off)
> +{
> +	int ret;
> +	int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
> +	int offset = off / BANK_SZ;
> +
> +	ret = i2c_smbus_read_byte_data(chip->client,
> +				(reg << bank_shift) + offset);
> +	*val = ret;
> +
> +	if (ret < 0) {
> +		dev_err(&chip->client->dev, "failed reading register\n", reg);

This triggers a warning, since you have an argument but nothing corresponding to it in your format string.

>  static irqreturn_t pca953x_irq_handler(int irq, void *devid)
>  {
>  	struct pca953x_chip *chip = devid;
> -	u32 pending;
> -	u32 level;
> +	u8 pending[MAX_BANK];
> +	u8 level;
> +	int i;
>  
> -	pending = pca953x_irq_pending(chip);
> -
> -	if (!pending)
> +	if (!pca953x_irq_pending(chip, pending))
>  		return IRQ_HANDLED;
>  
> -	do {
> -		level = __ffs(pending);
> -		handle_nested_irq(irq_find_mapping(chip->domain, level));
> -
> -		pending &= ~(1 << level);
> -	} while (pending);
> +	for (i = 0; i < NBANK(chip); i++) {
> +		do {
> +			level = __ffs(pending[i]);
> +			handle_nested_irq(irq_find_mapping(chip->domain,
> +							level + (BANK_SZ * i)));
> +			pending[i] &= ~(1 << level);
> +		} while (pending[i]);
> +	}
>  
>  	return IRQ_HANDLED;
>  }

This triggers the following warning when an interrupt is raised:

[   30.773500] ------------[ cut here ]------------
[   30.778843] WARNING: at /home/tmp/linux/kernel/irq/irqdomain.c:137 irq_domain_legacy_revmap+0x2c/0x48()
[   30.788375] Modules linked in:
[   30.791531] [<c0014100>] (unwind_backtrace+0x0/0xf0) from [<c001c878>] (warn_slowpath_common+0x4c/0x64)
[   30.801125] [<c001c878>] (warn_slowpath_common+0x4c/0x64) from [<c001c8ac>] (warn_slowpath_null+0x1c/0x24)
[   30.810968] [<c001c8ac>] (warn_slowpath_null+0x1c/0x24) from [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48)
[   30.821187] [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48) from [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac)
[   30.831656] [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac) from [<c0068688>] (irq_thread+0xd0/0x124)
[   30.841000] [<c0068688>] (irq_thread+0xd0/0x124) from [<c003c238>] (kthread+0xa4/0xb0)
[   30.849125] [<c003c238>] (kthread+0xa4/0xb0) from [<c000ed48>] (ret_from_fork+0x14/0x2c)
[   30.857375] ---[ end trace 09584b7a73100a49 ]---

Maxime

-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Grant Likely <grant.likely@secretlab.ca>,
	Andreas Schallenberg <Andreas.Schallenberg@3alitytechnica.com>,
	Roland Stigge <stigge@antcom.de>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH V2 1/3] gpio: pca953x: make the register access by GPIO bank
Date: Tue, 08 Jan 2013 09:32:54 +0100	[thread overview]
Message-ID: <50EBD9B6.3090601@free-electrons.com> (raw)
In-Reply-To: <1357599097-19053-2-git-send-email-gregory.clement@free-electrons.com>

Hi Gregory,

On 07/01/2013 23:51, Gregory CLEMENT wrote:
> -static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
> +static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val,
> +				int off)
> +{
> +	int ret;
> +	int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
> +	int offset = off / BANK_SZ;
> +
> +	ret = i2c_smbus_read_byte_data(chip->client,
> +				(reg << bank_shift) + offset);
> +	*val = ret;
> +
> +	if (ret < 0) {
> +		dev_err(&chip->client->dev, "failed reading register\n", reg);

This triggers a warning, since you have an argument but nothing corresponding to it in your format string.

>  static irqreturn_t pca953x_irq_handler(int irq, void *devid)
>  {
>  	struct pca953x_chip *chip = devid;
> -	u32 pending;
> -	u32 level;
> +	u8 pending[MAX_BANK];
> +	u8 level;
> +	int i;
>  
> -	pending = pca953x_irq_pending(chip);
> -
> -	if (!pending)
> +	if (!pca953x_irq_pending(chip, pending))
>  		return IRQ_HANDLED;
>  
> -	do {
> -		level = __ffs(pending);
> -		handle_nested_irq(irq_find_mapping(chip->domain, level));
> -
> -		pending &= ~(1 << level);
> -	} while (pending);
> +	for (i = 0; i < NBANK(chip); i++) {
> +		do {
> +			level = __ffs(pending[i]);
> +			handle_nested_irq(irq_find_mapping(chip->domain,
> +							level + (BANK_SZ * i)));
> +			pending[i] &= ~(1 << level);
> +		} while (pending[i]);
> +	}
>  
>  	return IRQ_HANDLED;
>  }

This triggers the following warning when an interrupt is raised:

[   30.773500] ------------[ cut here ]------------
[   30.778843] WARNING: at /home/tmp/linux/kernel/irq/irqdomain.c:137 irq_domain_legacy_revmap+0x2c/0x48()
[   30.788375] Modules linked in:
[   30.791531] [<c0014100>] (unwind_backtrace+0x0/0xf0) from [<c001c878>] (warn_slowpath_common+0x4c/0x64)
[   30.801125] [<c001c878>] (warn_slowpath_common+0x4c/0x64) from [<c001c8ac>] (warn_slowpath_null+0x1c/0x24)
[   30.810968] [<c001c8ac>] (warn_slowpath_null+0x1c/0x24) from [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48)
[   30.821187] [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48) from [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac)
[   30.831656] [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac) from [<c0068688>] (irq_thread+0xd0/0x124)
[   30.841000] [<c0068688>] (irq_thread+0xd0/0x124) from [<c003c238>] (kthread+0xa4/0xb0)
[   30.849125] [<c003c238>] (kthread+0xa4/0xb0) from [<c000ed48>] (ret_from_fork+0x14/0x2c)
[   30.857375] ---[ end trace 09584b7a73100a49 ]---

Maxime

-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

  reply	other threads:[~2013-01-08  8:32 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-07 22:51 [PATCH V2 0/3] Add support for gpio expander pca9505 used on Mirabox Gregory CLEMENT
2013-01-07 22:51 ` Gregory CLEMENT
2013-01-07 22:51 ` [PATCH V2 1/3] gpio: pca953x: make the register access by GPIO bank Gregory CLEMENT
2013-01-07 22:51   ` Gregory CLEMENT
2013-01-08  8:32   ` Maxime Ripard [this message]
2013-01-08  8:32     ` Maxime Ripard
2013-01-08  8:58     ` Gregory CLEMENT
2013-01-08  8:58       ` Gregory CLEMENT
2013-01-08  9:00       ` Maxime Ripard
2013-01-08  9:00         ` Maxime Ripard
2013-01-21 23:30       ` Gregory CLEMENT
2013-01-21 23:30         ` Gregory CLEMENT
2013-01-07 22:51 ` [PATCH V2 2/3] gpio: pca953x: add support for pca9505 Gregory CLEMENT
2013-01-07 22:51   ` Gregory CLEMENT
2013-01-07 22:51 ` [PATCH V2 3/3] arm: mvebu: enable gpio expander over i2c on Mirabox platform Gregory CLEMENT
2013-01-07 22:51   ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50EBD9B6.3090601@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.