* [Qemu-devel] [PATCH 1/3] hw/dma.c: Fix conversion of ioport_register* to MemoryRegion
2013-01-15 18:31 [Qemu-devel] [PULL for-1.4] Memory API ioport cleanups Andreas Färber
@ 2013-01-15 18:31 ` Andreas Färber
2013-01-15 18:31 ` Andreas Färber
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Andreas Färber @ 2013-01-15 18:31 UTC (permalink / raw)
To: qemu-devel; +Cc: Julien Grall, Andreas Färber
From: Julien Grall <julien.grall@citrix.com>
The commit 582299336879504353e60c7937fbc70fea93f3da introduced a 1-shift for
some offset in DMA emulation.
Before the previous commit, which converted ioport_register_* to
MemoryRegion, the DMA controller registered 8 ioports with the following
formula:
base + ((8 + i) << d->shift) where 0 <= i < 8
When an IO occured within a Memory Region, DMA callback receives an
offset relative to the start address. Here the start address is:
base + (8 << d->shift).
The offset should be: (i << d->shift). After the shift is reverted, the
offsets are 0..7 not 1..8.
Fixes LP#1089996.
Reported-by: Andreas Gustafsson <gson@gson.org>
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
hw/dma.c | 22 +++++++++++-----------
1 Datei geändert, 11 Zeilen hinzugefügt(+), 11 Zeilen entfernt(-)
diff --git a/hw/dma.c b/hw/dma.c
index 0634baa..5bdf435 100644
--- a/hw/dma.c
+++ b/hw/dma.c
@@ -201,7 +201,7 @@ static void write_cont(void *opaque, hwaddr nport, uint64_t data,
iport = (nport >> d->dshift) & 0x0f;
switch (iport) {
- case 0x01: /* command */
+ case 0x00: /* command */
if ((data != 0) && (data & CMD_NOT_SUPPORTED)) {
dolog("command %"PRIx64" not supported\n", data);
return;
@@ -209,7 +209,7 @@ static void write_cont(void *opaque, hwaddr nport, uint64_t data,
d->command = data;
break;
- case 0x02:
+ case 0x01:
ichan = data & 3;
if (data & 4) {
d->status |= 1 << (ichan + 4);
@@ -221,7 +221,7 @@ static void write_cont(void *opaque, hwaddr nport, uint64_t data,
DMA_run();
break;
- case 0x03: /* single mask */
+ case 0x02: /* single mask */
if (data & 4)
d->mask |= 1 << (data & 3);
else
@@ -229,7 +229,7 @@ static void write_cont(void *opaque, hwaddr nport, uint64_t data,
DMA_run();
break;
- case 0x04: /* mode */
+ case 0x03: /* mode */
{
ichan = data & 3;
#ifdef DEBUG_DMA
@@ -248,23 +248,23 @@ static void write_cont(void *opaque, hwaddr nport, uint64_t data,
break;
}
- case 0x05: /* clear flip flop */
+ case 0x04: /* clear flip flop */
d->flip_flop = 0;
break;
- case 0x06: /* reset */
+ case 0x05: /* reset */
d->flip_flop = 0;
d->mask = ~0;
d->status = 0;
d->command = 0;
break;
- case 0x07: /* clear mask for all channels */
+ case 0x06: /* clear mask for all channels */
d->mask = 0;
DMA_run();
break;
- case 0x08: /* write mask for all channels */
+ case 0x07: /* write mask for all channels */
d->mask = data;
DMA_run();
break;
@@ -289,11 +289,11 @@ static uint64_t read_cont(void *opaque, hwaddr nport, unsigned size)
iport = (nport >> d->dshift) & 0x0f;
switch (iport) {
- case 0x08: /* status */
+ case 0x00: /* status */
val = d->status;
d->status &= 0xf0;
break;
- case 0x0f: /* mask */
+ case 0x01: /* mask */
val = d->mask;
break;
default:
@@ -468,7 +468,7 @@ void DMA_schedule(int nchan)
static void dma_reset(void *opaque)
{
struct dma_cont *d = opaque;
- write_cont(d, (0x06 << d->dshift), 0, 1);
+ write_cont(d, (0x05 << d->dshift), 0, 1);
}
static int dma_phony_handler (void *opaque, int nchan, int dma_pos, int dma_len)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [Qemu-devel] [PATCH 2/3] xen_platform: Do not use old_portio-style callbacks
2013-01-15 18:31 [Qemu-devel] [PULL for-1.4] Memory API ioport cleanups Andreas Färber
@ 2013-01-15 18:31 ` Andreas Färber
2013-01-15 18:31 ` Andreas Färber
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Andreas Färber @ 2013-01-15 18:31 UTC (permalink / raw)
To: qemu-devel
Cc: open list:X86, Hervé Poussineau, Andreas Färber,
Stefano Stabellini
From: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
hw/xen_platform.c | 21 ++++++++++-----------
1 Datei geändert, 10 Zeilen hinzugefügt(+), 11 Zeilen entfernt(-)
diff --git a/hw/xen_platform.c b/hw/xen_platform.c
index ca66047..8866468 100644
--- a/hw/xen_platform.c
+++ b/hw/xen_platform.c
@@ -279,7 +279,8 @@ static void platform_fixed_ioport_init(PCIXenPlatformState* s)
/* Xen Platform PCI Device */
-static uint32_t xen_platform_ioport_readb(void *opaque, uint32_t addr)
+static uint64_t xen_platform_ioport_readb(void *opaque, hwaddr addr,
+ unsigned int size)
{
if (addr == 0) {
return platform_fixed_ioport_readb(opaque, 0);
@@ -288,30 +289,28 @@ static uint32_t xen_platform_ioport_readb(void *opaque, uint32_t addr)
}
}
-static void xen_platform_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+static void xen_platform_ioport_writeb(void *opaque, hwaddr addr,
+ uint64_t val, unsigned int size)
{
PCIXenPlatformState *s = opaque;
switch (addr) {
case 0: /* Platform flags */
- platform_fixed_ioport_writeb(opaque, 0, val);
+ platform_fixed_ioport_writeb(opaque, 0, (uint32_t)val);
break;
case 8:
- log_writeb(s, val);
+ log_writeb(s, (uint32_t)val);
break;
default:
break;
}
}
-static MemoryRegionPortio xen_pci_portio[] = {
- { 0, 0x100, 1, .read = xen_platform_ioport_readb, },
- { 0, 0x100, 1, .write = xen_platform_ioport_writeb, },
- PORTIO_END_OF_LIST()
-};
-
static const MemoryRegionOps xen_pci_io_ops = {
- .old_portio = xen_pci_portio,
+ .read = xen_platform_ioport_readb,
+ .write = xen_platform_ioport_writeb,
+ .impl.min_access_size = 1,
+ .impl.max_access_size = 1,
};
static void platform_ioport_bar_setup(PCIXenPlatformState *d)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/3] xen_platform: Do not use old_portio-style callbacks
@ 2013-01-15 18:31 ` Andreas Färber
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Färber @ 2013-01-15 18:31 UTC (permalink / raw)
To: qemu-devel
Cc: open list:X86, Hervé Poussineau, Andreas Färber,
Stefano Stabellini
From: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
hw/xen_platform.c | 21 ++++++++++-----------
1 Datei geändert, 10 Zeilen hinzugefügt(+), 11 Zeilen entfernt(-)
diff --git a/hw/xen_platform.c b/hw/xen_platform.c
index ca66047..8866468 100644
--- a/hw/xen_platform.c
+++ b/hw/xen_platform.c
@@ -279,7 +279,8 @@ static void platform_fixed_ioport_init(PCIXenPlatformState* s)
/* Xen Platform PCI Device */
-static uint32_t xen_platform_ioport_readb(void *opaque, uint32_t addr)
+static uint64_t xen_platform_ioport_readb(void *opaque, hwaddr addr,
+ unsigned int size)
{
if (addr == 0) {
return platform_fixed_ioport_readb(opaque, 0);
@@ -288,30 +289,28 @@ static uint32_t xen_platform_ioport_readb(void *opaque, uint32_t addr)
}
}
-static void xen_platform_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+static void xen_platform_ioport_writeb(void *opaque, hwaddr addr,
+ uint64_t val, unsigned int size)
{
PCIXenPlatformState *s = opaque;
switch (addr) {
case 0: /* Platform flags */
- platform_fixed_ioport_writeb(opaque, 0, val);
+ platform_fixed_ioport_writeb(opaque, 0, (uint32_t)val);
break;
case 8:
- log_writeb(s, val);
+ log_writeb(s, (uint32_t)val);
break;
default:
break;
}
}
-static MemoryRegionPortio xen_pci_portio[] = {
- { 0, 0x100, 1, .read = xen_platform_ioport_readb, },
- { 0, 0x100, 1, .write = xen_platform_ioport_writeb, },
- PORTIO_END_OF_LIST()
-};
-
static const MemoryRegionOps xen_pci_io_ops = {
- .old_portio = xen_pci_portio,
+ .read = xen_platform_ioport_readb,
+ .write = xen_platform_ioport_writeb,
+ .impl.min_access_size = 1,
+ .impl.max_access_size = 1,
};
static void platform_ioport_bar_setup(PCIXenPlatformState *d)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH 3/3] acpi_piix4: Do not use old_portio-style callbacks
2013-01-15 18:31 [Qemu-devel] [PULL for-1.4] Memory API ioport cleanups Andreas Färber
2013-01-15 18:31 ` [Qemu-devel] [PATCH 1/3] hw/dma.c: Fix conversion of ioport_register* to MemoryRegion Andreas Färber
2013-01-15 18:31 ` Andreas Färber
@ 2013-01-15 18:31 ` Andreas Färber
2013-01-15 18:40 ` [Qemu-devel] [PULL for-1.4] Memory API ioport cleanups Andreas Färber
3 siblings, 0 replies; 6+ messages in thread
From: Andreas Färber @ 2013-01-15 18:31 UTC (permalink / raw)
To: qemu-devel; +Cc: Hervé Poussineau, Andreas Färber
From: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Used HWADDR_PRIx for hwaddr PIIX4_DPRINTF()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
hw/acpi_piix4.c | 92 +++++++++++++++++++++++++------------------------------
1 Datei geändert, 41 Zeilen hinzugefügt(+), 51 Zeilen entfernt(-)
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index 2f84b4e..0d33849 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -531,68 +531,58 @@ static const MemoryRegionOps piix4_gpe_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
};
-static uint32_t pci_up_read(void *opaque, uint32_t addr)
+static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size)
{
PIIX4PMState *s = opaque;
- uint32_t val;
-
- /* Manufacture an "up" value to cause a device check on any hotplug
- * slot with a device. Extra device checks are harmless. */
- val = s->pci0_slot_device_present & s->pci0_hotplug_enable;
-
- PIIX4_DPRINTF("pci_up_read %x\n", val);
- return val;
-}
-
-static uint32_t pci_down_read(void *opaque, uint32_t addr)
-{
- PIIX4PMState *s = opaque;
- uint32_t val = s->pci0_status.down;
+ uint32_t val = 0;
+
+ switch (addr) {
+ case PCI_UP_BASE - PCI_HOTPLUG_ADDR:
+ /* Manufacture an "up" value to cause a device check on any hotplug
+ * slot with a device. Extra device checks are harmless. */
+ val = s->pci0_slot_device_present & s->pci0_hotplug_enable;
+ PIIX4_DPRINTF("pci_up_read %x\n", val);
+ break;
+ case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR:
+ val = s->pci0_status.down;
+ PIIX4_DPRINTF("pci_down_read %x\n", val);
+ break;
+ case PCI_EJ_BASE - PCI_HOTPLUG_ADDR:
+ /* No feature defined yet */
+ PIIX4_DPRINTF("pci_features_read %x\n", val);
+ break;
+ case PCI_RMV_BASE - PCI_HOTPLUG_ADDR:
+ val = s->pci0_hotplug_enable;
+ break;
+ default:
+ break;
+ }
- PIIX4_DPRINTF("pci_down_read %x\n", val);
return val;
}
-static uint32_t pci_features_read(void *opaque, uint32_t addr)
+static void pci_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned int size)
{
- /* No feature defined yet */
- PIIX4_DPRINTF("pci_features_read %x\n", 0);
- return 0;
-}
-
-static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
-{
- acpi_piix_eject_slot(opaque, val);
-
- PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
-}
-
-static uint32_t pcirmv_read(void *opaque, uint32_t addr)
-{
- PIIX4PMState *s = opaque;
-
- return s->pci0_hotplug_enable;
+ switch (addr) {
+ case PCI_EJ_BASE - PCI_HOTPLUG_ADDR:
+ acpi_piix_eject_slot(opaque, (uint32_t)data);
+ PIIX4_DPRINTF("pciej write %" HWADDR_PRIx " <== % " PRIu64 "\n",
+ addr, data);
+ break;
+ default:
+ break;
+ }
}
static const MemoryRegionOps piix4_pci_ops = {
- .old_portio = (MemoryRegionPortio[]) {
- {
- .offset = PCI_UP_BASE - PCI_HOTPLUG_ADDR, .len = 4, .size = 4,
- .read = pci_up_read,
- },{
- .offset = PCI_DOWN_BASE - PCI_HOTPLUG_ADDR, .len = 4, .size = 4,
- .read = pci_down_read,
- },{
- .offset = PCI_EJ_BASE - PCI_HOTPLUG_ADDR, .len = 4, .size = 4,
- .read = pci_features_read,
- .write = pciej_write,
- },{
- .offset = PCI_RMV_BASE - PCI_HOTPLUG_ADDR, .len = 4, .size = 4,
- .read = pcirmv_read,
- },
- PORTIO_END_OF_LIST()
- },
+ .read = pci_read,
+ .write = pci_write,
.endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
};
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [Qemu-devel] [PULL for-1.4] Memory API ioport cleanups
2013-01-15 18:31 [Qemu-devel] [PULL for-1.4] Memory API ioport cleanups Andreas Färber
` (2 preceding siblings ...)
2013-01-15 18:31 ` [Qemu-devel] [PATCH 3/3] acpi_piix4: " Andreas Färber
@ 2013-01-15 18:40 ` Andreas Färber
3 siblings, 0 replies; 6+ messages in thread
From: Andreas Färber @ 2013-01-15 18:40 UTC (permalink / raw)
To: qemu-devel; +Cc: Anthony Liguori
Am 15.01.2013 19:31, schrieb Andreas Färber:
> Hello,
>
> Here's a bugfix and a few more I/O port conversions to Memory API. Please pull.
Nah, please ignore, v2 coming up...
> Cc: Julien Grall <julien.grall@citrix.com>
> Cc: Hervé Poussineau <hpoussin@reactos.org>
>
>
> The following changes since commit cf7c3f0cb5a7129f57fa9e69d410d6a05031988c:
>
> virtio-9p: fix compilation error. (2013-01-14 18:52:39 -0600)
>
> are available in the git repository at:
>
> git://github.com/afaerber/qemu-cpu.git memory-ioport
>
> for you to fetch changes up to d054b57293f8b50660d5e8d5740239f6476076a4:
>
> acpi_piix4: Do not use old_portio-style callbacks (2013-01-15 18:14:54 +0100)
>
> ----------------------------------------------------------------
> Hervé Poussineau (2):
> xen_platform: Do not use old_portio-style callbacks
> acpi_piix4: Do not use old_portio-style callbacks
>
> Julien Grall (1):
> hw/dma.c: Fix conversion of ioport_register* to MemoryRegion
>
> hw/acpi_piix4.c | 92 ++++++++++++++++++++++++-----------------------------
> hw/dma.c | 22 ++++++-------
> hw/xen_platform.c | 21 ++++++------
> 3 Dateien geändert, 62 Zeilen hinzugefügt(+), 73 Zeilen entfernt(-)
>
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 6+ messages in thread