From: Alex Elder <elder@inktank.com>
To: Josh Durgin <josh.durgin@inktank.com>
Cc: "ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>
Subject: [PATCH, v2] rbd: encapsulate handling for a single request
Date: Thu, 17 Jan 2013 15:04:11 -0600 [thread overview]
Message-ID: <50F8674B.7010109@inktank.com> (raw)
In-Reply-To: <50F5EA25.2070303@inktank.com>
In rbd_rq_fn(), requests are fetched from the block layer and each
request is processed, looping through the request's list of bio's
until they've all been consumed.
Separate the handling for a single request into its own function to
make it a bit easier to see what's going on.
Signed-off-by: Alex Elder <elder@inktank.com>
---
v2: Changed to handle 0-length requests the same as before.
drivers/block/rbd.c | 119
+++++++++++++++++++++++++++------------------------
1 file changed, 63 insertions(+), 56 deletions(-)
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 8d93b6a..738d1e4 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -1583,6 +1583,64 @@ static struct rbd_req_coll *rbd_alloc_coll(int
num_reqs)
return coll;
}
+static int rbd_dev_do_request(struct request *rq,
+ struct rbd_device *rbd_dev,
+ struct ceph_snap_context *snapc,
+ u64 ofs, unsigned int size,
+ struct bio *bio_chain)
+{
+ int num_segs;
+ struct rbd_req_coll *coll;
+ unsigned int bio_offset;
+ int cur_seg = 0;
+
+ dout("%s 0x%x bytes at 0x%llx\n",
+ rq_data_dir(rq) == WRITE ? "write" : "read",
+ size, (unsigned long long) blk_rq_pos(rq) * SECTOR_SIZE);
+
+ num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size);
+ if (num_segs <= 0)
+ return num_segs;
+
+ coll = rbd_alloc_coll(num_segs);
+ if (!coll)
+ return -ENOMEM;
+
+ bio_offset = 0;
+ do {
+ u64 limit = rbd_segment_length(rbd_dev, ofs, size);
+ unsigned int clone_size;
+ struct bio *bio_clone;
+
+ BUG_ON(limit > (u64)UINT_MAX);
+ clone_size = (unsigned int)limit;
+ dout("bio_chain->bi_vcnt=%hu\n", bio_chain->bi_vcnt);
+
+ kref_get(&coll->kref);
+
+ /* Pass a cloned bio chain via an osd request */
+
+ bio_clone = bio_chain_clone_range(&bio_chain,
+ &bio_offset, clone_size,
+ GFP_ATOMIC);
+ if (bio_clone)
+ (void)rbd_do_op(rq, rbd_dev, snapc,
+ ofs, clone_size,
+ bio_clone, coll, cur_seg);
+ else
+ rbd_coll_end_req_index(rq, coll, cur_seg,
+ (s32)-ENOMEM,
+ clone_size);
+ size -= clone_size;
+ ofs += clone_size;
+
+ cur_seg++;
+ } while (size > 0);
+ kref_put(&coll->kref, rbd_coll_release);
+
+ return 0;
+}
+
/*
* block device queue callback
*/
@@ -1596,10 +1654,8 @@ static void rbd_rq_fn(struct request_queue *q)
bool do_write;
unsigned int size;
u64 ofs;
- int num_segs, cur_seg = 0;
- struct rbd_req_coll *coll;
struct ceph_snap_context *snapc;
- unsigned int bio_offset;
+ int result;
dout("fetched request\n");
@@ -1637,60 +1693,11 @@ static void rbd_rq_fn(struct request_queue *q)
ofs = blk_rq_pos(rq) * SECTOR_SIZE;
bio = rq->bio;
- dout("%s 0x%x bytes at 0x%llx\n",
- do_write ? "write" : "read",
- size, (unsigned long long) blk_rq_pos(rq) * SECTOR_SIZE);
-
- num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size);
- if (num_segs <= 0) {
- spin_lock_irq(q->queue_lock);
- __blk_end_request_all(rq, num_segs);
- ceph_put_snap_context(snapc);
- continue;
- }
- coll = rbd_alloc_coll(num_segs);
- if (!coll) {
- spin_lock_irq(q->queue_lock);
- __blk_end_request_all(rq, -ENOMEM);
- ceph_put_snap_context(snapc);
- continue;
- }
-
- bio_offset = 0;
- do {
- u64 limit = rbd_segment_length(rbd_dev, ofs, size);
- unsigned int chain_size;
- struct bio *bio_chain;
-
- BUG_ON(limit > (u64) UINT_MAX);
- chain_size = (unsigned int) limit;
- dout("rq->bio->bi_vcnt=%hu\n", rq->bio->bi_vcnt);
-
- kref_get(&coll->kref);
-
- /* Pass a cloned bio chain via an osd request */
-
- bio_chain = bio_chain_clone_range(&bio,
- &bio_offset, chain_size,
- GFP_ATOMIC);
- if (bio_chain)
- (void) rbd_do_op(rq, rbd_dev, snapc,
- ofs, chain_size,
- bio_chain, coll, cur_seg);
- else
- rbd_coll_end_req_index(rq, coll, cur_seg,
- (s32)-ENOMEM,
- chain_size);
- size -= chain_size;
- ofs += chain_size;
-
- cur_seg++;
- } while (size > 0);
- kref_put(&coll->kref, rbd_coll_release);
-
- spin_lock_irq(q->queue_lock);
-
+ result = rbd_dev_do_request(rq, rbd_dev, snapc, ofs, size, bio);
ceph_put_snap_context(snapc);
+ spin_lock_irq(q->queue_lock);
+ if (!size || result < 0)
+ __blk_end_request_all(rq, result);
}
}
--
1.7.9.5
next prev parent reply other threads:[~2013-01-17 21:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-03 22:42 [PATCH REPOST 0/2] rbd: simplify rbd_rq_fn() Alex Elder
2013-01-03 22:43 ` [PATCH REPOST 1/2] rbd: encapsulate handling for a single request Alex Elder
2013-01-15 23:45 ` Josh Durgin
2013-01-17 21:01 ` Alex Elder
2013-01-17 21:04 ` Alex Elder [this message]
2013-01-17 21:30 ` [PATCH, v2] " Josh Durgin
2013-01-03 22:43 ` [PATCH REPOST 2/2] rbd: a little more cleanup of rbd_rq_fn() Alex Elder
2013-01-16 0:02 ` Josh Durgin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F8674B.7010109@inktank.com \
--to=elder@inktank.com \
--cc=ceph-devel@vger.kernel.org \
--cc=josh.durgin@inktank.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.