Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot

[Roger Quadros <rogerq@ti.com>]

On 01/22/2013 11:58 AM, Kishon Vijay Abraham I wrote:
> The OMAP glue has been modified to get PHY by phandle for dt boot.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/usb/musb/omap2430.c |    7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index 1a8cf6d..e43faeb 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -345,7 +345,12 @@ static int omap2430_musb_init(struct musb *musb)
>  	 * up through ULPI.  TWL4030-family PMICs include one,
>  	 * which needs a driver, drivers aren't always needed.
>  	 */
> -	musb->xceiv = devm_usb_get_phy_dev(dev, 0);
> +	if (dev->parent->of_node)
> +		musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
> +		    "usb_phy", 0);
> +	else
> +		musb->xceiv = devm_usb_get_phy_dev(dev, 0);
> +
>  	if (IS_ERR_OR_NULL(musb->xceiv)) {
>  		pr_err("HS USB OTG: no transceiver configured\n");
>  		return -ENODEV;

This will not work with PHY driver as a module. You need to use deferred probing mechanism here
after you have addressed my comment in patch 2 and also devm_usb_get_phy_by_phandle()

e.g.

if (IS_ERR(musb->xceiv)) {
	int ret = PTR_ERR(musb->xveiv);

	if (ret == -ENODEV)
		pr_err("HS USB OTG: no transceiver configured\n");

	return ret;
}

--
cheers,
-roger