All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: "linux-nfs@vger.kernel.org" <linux-nfs@vger.kernel.org>,
	netdev <netdev@vger.kernel.org>
Subject: Hung tasks related to do_filp_open in net-next (3.8.0-rc3+)
Date: Wed, 23 Jan 2013 13:38:32 -0800	[thread overview]
Message-ID: <51005858.4040107@candelatech.com> (raw)


I cranked up my 3000 NFS mounts test case on today's net-next (3.8.0-rc3+)
and about 8 of these splats.  There were around 780 mounts active
when these occurred.

Seems like the system continues OK, so not sure how important
this is...

INFO: task btserver:8756 blocked for more than 180 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
btserver        D 0000000000000004     0  8756   5781 0x00000080
  ffff880404ab1bf8 0000000000000046 0000000004ab1ba8 0000000000000432
  ffff880404ab0010 ffff880402263f20 ffff880404ab1fd8 00000000000132c0
  00000000000132c0 00000000000132c0 ffff880404ab1fd8 00000000000132c0
Call Trace:
  [<ffffffff815491ea>] schedule+0x5f/0x61
  [<ffffffff815494fa>] schedule_preempt_disabled+0x13/0x1f
  [<ffffffff81547ea8>] __mutex_lock_common+0x264/0x42d
  [<ffffffff8115fadb>] ? do_last+0x1db/0xa4e
  [<ffffffff8115fadb>] ? do_last+0x1db/0xa4e
  [<ffffffff815480d0>] mutex_lock_nested+0x16/0x18
  [<ffffffff8115fadb>] do_last+0x1db/0xa4e
  [<ffffffff8115f3a5>] ? path_init+0xcd/0x2b6
  [<ffffffff8116090b>] path_openat+0xcb/0x363
  [<ffffffff810d0055>] ? __lock_acquire+0x1df/0x53d
  [<ffffffff81160ca8>] do_filp_open+0x38/0x84
  [<ffffffff8154a2db>] ? _raw_spin_unlock+0x45/0x52
  [<ffffffff8116c203>] ? __alloc_fd+0x106/0x11a
  [<ffffffff815490f9>] ? __schedule+0x561/0x5a3
8021q: adding VLAN 0 to HW filter on device eth4#621
  [<ffffffff81153bfc>] do_sys_open+0x6d/0xff
8021q: adding VLAN 0 to HW filter on device eth3#612
  [<ffffffff81153cbb>] sys_open+0x1c/0x1e
  [<ffffffff8154f629>] system_call_fastpath+0x16/0x1b
2 locks held by btserver/8756:
  #0:  (sb_writers#10){......}, at: [<ffffffff81170013>] mnt_want_write+0x1f/0x48
  #1:  (&type->i_mutex_dir_key#4){......}, at: [<ffffffff8115fadb>] do_last+0x1db/0xa4e



-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


WARNING: multiple messages have this Message-ID (diff)
From: Ben Greear <greearb-my8/4N5VtI7c+919tysfdA@public.gmane.org>
To: "linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	netdev <netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Hung tasks related to do_filp_open in net-next (3.8.0-rc3+)
Date: Wed, 23 Jan 2013 13:38:32 -0800	[thread overview]
Message-ID: <51005858.4040107@candelatech.com> (raw)


I cranked up my 3000 NFS mounts test case on today's net-next (3.8.0-rc3+)
and about 8 of these splats.  There were around 780 mounts active
when these occurred.

Seems like the system continues OK, so not sure how important
this is...

INFO: task btserver:8756 blocked for more than 180 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
btserver        D 0000000000000004     0  8756   5781 0x00000080
  ffff880404ab1bf8 0000000000000046 0000000004ab1ba8 0000000000000432
  ffff880404ab0010 ffff880402263f20 ffff880404ab1fd8 00000000000132c0
  00000000000132c0 00000000000132c0 ffff880404ab1fd8 00000000000132c0
Call Trace:
  [<ffffffff815491ea>] schedule+0x5f/0x61
  [<ffffffff815494fa>] schedule_preempt_disabled+0x13/0x1f
  [<ffffffff81547ea8>] __mutex_lock_common+0x264/0x42d
  [<ffffffff8115fadb>] ? do_last+0x1db/0xa4e
  [<ffffffff8115fadb>] ? do_last+0x1db/0xa4e
  [<ffffffff815480d0>] mutex_lock_nested+0x16/0x18
  [<ffffffff8115fadb>] do_last+0x1db/0xa4e
  [<ffffffff8115f3a5>] ? path_init+0xcd/0x2b6
  [<ffffffff8116090b>] path_openat+0xcb/0x363
  [<ffffffff810d0055>] ? __lock_acquire+0x1df/0x53d
  [<ffffffff81160ca8>] do_filp_open+0x38/0x84
  [<ffffffff8154a2db>] ? _raw_spin_unlock+0x45/0x52
  [<ffffffff8116c203>] ? __alloc_fd+0x106/0x11a
  [<ffffffff815490f9>] ? __schedule+0x561/0x5a3
8021q: adding VLAN 0 to HW filter on device eth4#621
  [<ffffffff81153bfc>] do_sys_open+0x6d/0xff
8021q: adding VLAN 0 to HW filter on device eth3#612
  [<ffffffff81153cbb>] sys_open+0x1c/0x1e
  [<ffffffff8154f629>] system_call_fastpath+0x16/0x1b
2 locks held by btserver/8756:
  #0:  (sb_writers#10){......}, at: [<ffffffff81170013>] mnt_want_write+0x1f/0x48
  #1:  (&type->i_mutex_dir_key#4){......}, at: [<ffffffff8115fadb>] do_last+0x1db/0xa4e



-- 
Ben Greear <greearb-my8/4N5VtI7c+919tysfdA@public.gmane.org>
Candela Technologies Inc  http://www.candelatech.com

--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2013-01-23 21:38 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-23 21:38 Ben Greear [this message]
2013-01-23 21:38 ` Hung tasks related to do_filp_open in net-next (3.8.0-rc3+) Ben Greear
2013-01-24 18:42 ` Ben Greear
2013-01-24 18:42   ` Ben Greear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51005858.4040107@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=linux-nfs@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.