* Fullpass Test Report for Yocto 1.4 20130115 Build
@ 2013-01-24 15:23 Palalau, AlexandruX
2013-01-25 22:02 ` Liu, Song
0 siblings, 1 reply; 3+ messages in thread
From: Palalau, AlexandruX @ 2013-01-24 15:23 UTC (permalink / raw)
To: yocto@yoctoproject.org
[-- Attachment #1.1: Type: text/plain, Size: 4136 bytes --]
Hello,
Here is the fullpass test report for Yocto 1.4 20130115 build. The testings for qemuppc, mpc8315e, and p1022ds are blocked since the images didn't build out due to some known issues (oprofile and libxml failures).
We have some new bugs regarding CoreBuildSystem (Bug 3745. 3756, 3757). Also, there are some problems regarding smart (Bug 3768, 3769). No problems under qemu this time.
Attached you can find the full test result.
Test Summary
-------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
Beagleboard
GOOD
Everything runs well
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
BLOCK
No image built out
P1022DS
BLOCK
No image built out
QEMU
qemuarm
GOOD
Everything runs well
qemux86
GOOD
Everything runs well
qemux86-64
GOOD
Everything runs well
qemuppc
GOOD
Everything runs well
qemumips
BLOCK
No image built out
Core Build System
BUGGY
gtk-directfb image build failed; disk space monitoring gives error ;Bitbake remake/remake-native check; Compile and load kernel; Crosstap script check.
ADT Toolchain
BUGGY
gtk+-2.0 missing from the userbuilt toolchain; autoreconf run failed
Compliance
Not running
Stress
Beagleboard
Not running
BLOCK
Critical bugs, more than 50% test cases are blocked
GOOD
Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
BUGGY
Normal, Major and Critical bugs, more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Beagleboard Sato-SDK
66
0
66
0
0
Routerstationpro Sato-SDK
43
0
43
0
0
Mpc8315e-rdb Sato-SDK
45
0
0
0
45
P1022DS
42
0
0
0
42 (bug 3476)
Qemux86
82
0
82
0
0
Qemux86-64
82
0
82
0
0
Qemuarm Sato
42
0
42
0
0
Qemuarm Sato-SDK
47
0
47
0
0
Qemumips Sato
42
0
42
0
0
Qemumips Sato-SDK
47
0
47
0
0
Qemuppc Sato
42
0
0
0
42
Qemuppc Sato-SDK
47
0
0
0
47
Core Build System
78
2
72
4 (bug 3523,3745, 3642)
2
ADT Toolchain
22
0
20
2 (bug 3338, 3758)
0
HOB
38
0
37
1(3001)
0
Compliance
2
2
0
0
0
Stress
2
2
0
0
0
Total
769
6
580
7
178
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases’ bug number.
Commit information
--------------------------------
Location: http://autobuilder.yoctoproject.org/pub/nightly/20130115-2
Tree/Branch: poky/master
Commit: 9eb88ceb39b7d0b8ddc6487e61ce8edadef10ec4
Issue Summary
-----------------------------------
Component
Bug Number
Target Milestone
System & Core OS
System Usage
New! 3769 smart: some packages can not be reinstalled
New! 3768 smart: --yaml option doesn't work
1.4
1.4
Others
Bug 3476 Autobuilder failing on fsl-ppc
1.4 M2
Core Build System
Bug 3642 gtk-demo fails to run for gtk-directfb image
Bug 3523 Disk space monitoring gives error: Unknown event
New! Bug 3745 Bitbake remake/remake-native check fail
New! Bug 3757 Compile and load kernel fail
New! Bug 3756 Crosstap script fail
1.4
1.4
1.4
1.4 M3
----
ADT Toolchain
Bug 3338 iptables-1.4.15: autoreconf run failed on gmae-toolchain
Bug 3758 Package gtk+-2.0 missing from the userbuilt toolchain
1.4 M2
1.4 M3
Compliance
Not running
Stress
Not running
Verified Bugs
-----------------------------------
1. [Bug 3643]<http://bugzilla.pokylinux.org/show_bug.cgi?id=3643>: smart config --help error: Invalid command 'config'
2. [Bug 3646]<http://bugzilla.pokylinux.org/show_bug.cgi?id=3646>: non GPLv3 build failure with core-image-basic
Br,
Alexandru Palalau
QA contractor Yocto Project
[-- Attachment #1.2: Type: text/html, Size: 36932 bytes --]
[-- Attachment #2: 1.4_20130115_fullpass.xlsx --]
[-- Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet, Size: 44675 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fullpass Test Report for Yocto 1.4 20130115 Build
2013-01-24 15:23 Fullpass Test Report for Yocto 1.4 20130115 Build Palalau, AlexandruX
@ 2013-01-25 22:02 ` Liu, Song
2013-01-25 22:11 ` Saul Wold
0 siblings, 1 reply; 3+ messages in thread
From: Liu, Song @ 2013-01-25 22:02 UTC (permalink / raw)
To: Palalau, AlexandruX, Flanagan, Elizabeth, Wold, Saul
Cc: yocto@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 4459 bytes --]
Hi Saul/Beth,
What is the issue for the 3 ‘no image’ issue (marked red) in the report? Do we have a solution now?
Thanks!
Song
From: Palalau, AlexandruX
Sent: Thursday, January 24, 2013 7:23 AM
To: yocto@yoctoproject.org
Cc: Liu, Song
Subject: Fullpass Test Report for Yocto 1.4 20130115 Build
Hello,
Here is the fullpass test report for Yocto 1.4 20130115 build. The testings for qemuppc, mpc8315e, and p1022ds are blocked since the images didn't build out due to some known issues (oprofile and libxml failures).
We have some new bugs regarding CoreBuildSystem (Bug 3745. 3756, 3757). Also, there are some problems regarding smart (Bug 3768, 3769). No problems under qemu this time.
Attached you can find the full test result.
Test Summary
-------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
Beagleboard
GOOD
Everything runs well
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
BLOCK
No image built out
P1022DS
BLOCK
No image built out
QEMU
qemuarm
GOOD
Everything runs well
qemux86
GOOD
Everything runs well
qemux86-64
GOOD
Everything runs well
qemuppc
GOOD
Everything runs well
qemumips
BLOCK
No image built out
Core Build System
BUGGY
gtk-directfb image build failed; disk space monitoring gives error ;Bitbake remake/remake-native check; Compile and load kernel; Crosstap script check.
ADT Toolchain
BUGGY
gtk+-2.0 missing from the userbuilt toolchain; autoreconf run failed
Compliance
Not running
Stress
Beagleboard
Not running
BLOCK
Critical bugs, more than 50% test cases are blocked
GOOD
Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
BUGGY
Normal, Major and Critical bugs, more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Beagleboard Sato-SDK
66
0
66
0
0
Routerstationpro Sato-SDK
43
0
43
0
0
Mpc8315e-rdb Sato-SDK
45
0
0
0
45
P1022DS
42
0
0
0
42 (bug 3476)
Qemux86
82
0
82
0
0
Qemux86-64
82
0
82
0
0
Qemuarm Sato
42
0
42
0
0
Qemuarm Sato-SDK
47
0
47
0
0
Qemumips Sato
42
0
42
0
0
Qemumips Sato-SDK
47
0
47
0
0
Qemuppc Sato
42
0
0
0
42
Qemuppc Sato-SDK
47
0
0
0
47
Core Build System
78
2
72
4 (bug 3523,3745, 3642)
2
ADT Toolchain
22
0
20
2 (bug 3338, 3758)
0
HOB
38
0
37
1(3001)
0
Compliance
2
2
0
0
0
Stress
2
2
0
0
0
Total
769
6
580
7
178
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases’ bug number.
Commit information
--------------------------------
Location: http://autobuilder.yoctoproject.org/pub/nightly/20130115-2
Tree/Branch: poky/master
Commit: 9eb88ceb39b7d0b8ddc6487e61ce8edadef10ec4
Issue Summary
-----------------------------------
Component
Bug Number
Target Milestone
System & Core OS
System Usage
New! 3769 smart: some packages can not be reinstalled
New! 3768 smart: --yaml option doesn't work
1.4
1.4
Others
Bug 3476 Autobuilder failing on fsl-ppc
1.4 M2
Core Build System
Bug 3642 gtk-demo fails to run for gtk-directfb image
Bug 3523 Disk space monitoring gives error: Unknown event
New! Bug 3745 Bitbake remake/remake-native check fail
New! Bug 3757 Compile and load kernel fail
New! Bug 3756 Crosstap script fail
1.4
1.4
1.4
1.4 M3
----
ADT Toolchain
Bug 3338 iptables-1.4.15: autoreconf run failed on gmae-toolchain
Bug 3758 Package gtk+-2.0 missing from the userbuilt toolchain
1.4 M2
1.4 M3
Compliance
Not running
Stress
Not running
Verified Bugs
-----------------------------------
1. [Bug 3643]<http://bugzilla.pokylinux.org/show_bug.cgi?id=3643>: smart config --help error: Invalid command 'config'
2. [Bug 3646]<http://bugzilla.pokylinux.org/show_bug.cgi?id=3646>: non GPLv3 build failure with core-image-basic
Br,
Alexandru Palalau
QA contractor Yocto Project
[-- Attachment #2: Type: text/html, Size: 39173 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fullpass Test Report for Yocto 1.4 20130115 Build
2013-01-25 22:02 ` Liu, Song
@ 2013-01-25 22:11 ` Saul Wold
0 siblings, 0 replies; 3+ messages in thread
From: Saul Wold @ 2013-01-25 22:11 UTC (permalink / raw)
To: Liu, Song; +Cc: Palalau, AlexandruX, yocto@yoctoproject.org
On 01/25/2013 02:02 PM, Liu, Song wrote:
> Hi Saul/Beth,
>
> What is the issue for the 3 ‘no image’ issue (marked red) in the report?
> Do we have a solution now?
>
That's the preM3 Build. I am looking back in the AB, and I do not see
the master failure for qemumips, we had a problem with PPC due to
oprofile being broken, that has been fixed for M3rc1.
The P1022DS has been failing for a while, I think Matthew needs to give
it some love to make it better.
Sau!
> Thanks!
>
> Song
>
> *From:*Palalau, AlexandruX
> *Sent:* Thursday, January 24, 2013 7:23 AM
> *To:* yocto@yoctoproject.org
> *Cc:* Liu, Song
> *Subject:* Fullpass Test Report for Yocto 1.4 20130115 Build
>
> Hello,
> Here is the fullpass test report for Yocto 1.4 20130115 build. The
> testings for qemuppc, mpc8315e, and p1022ds are blocked since the images
> didn't build out due to some known issues (oprofile and libxml failures).
>
> We have some new bugs regarding CoreBuildSystem (Bug 3745. 3756, 3757).
> Also, there are some problems regarding smart (Bug 3768, 3769). No
> problems under qemu this time.
>
> Attached you can find the full test result.
>
>
>
> *Test Summary
> -------------------------*
>
> *Test Result Summary*
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
> *BSP*
>
>
>
> Beagleboard
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> BLOCK
>
>
>
> No image built out
>
>
>
> P1022DS
>
>
>
> BLOCK
>
>
>
> No image built out
>
> *QEMU*
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
> **
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
> **
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> qemumips
>
>
>
> BLOCK
>
>
>
> No image built out
>
> *Core Build System*
>
>
>
> BUGGY
>
>
>
> gtk-directfb image build failed; disk space monitoring gives error
> ;Bitbake remake/remake-native check; Compile and load kernel; Crosstap
> script check.
>
> *ADT Toolchain*
>
>
>
> BUGGY
>
>
>
> gtk+-2.0 missing from the userbuilt toolchain; autoreconf run failed
>
> *Compliance*
>
>
>
> Not running
>
> *Stress*
>
>
>
> Beagleboard
>
>
>
> Not running
>
> BLOCK
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
> GOOD
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
> BUGGY
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
> *Detailed Test Result for each component*
>
> *Target*
>
>
>
> *Total TCs*
>
>
>
> *Not Run*
>
>
>
> *Passed*
>
>
>
> *Failed*
>
>
>
> *Not testable (Blocked)*
>
> *Beagleboard Sato-SDK*
>
>
>
> 66
>
>
>
> 0
>
>
>
> 66
>
>
>
> 0
>
>
>
> 0
>
> *Routerstationpro Sato-SDK*
>
>
>
> 43
>
>
>
> 0
>
>
>
> 43
>
>
>
> 0
>
>
>
> 0
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 45
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 45
>
> *P1022DS*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 42 (bug 3476)
>
> *Qemux86*
>
>
>
> 82
>
>
>
> 0
>
>
>
> 82
>
>
>
> 0
>
>
>
> 0
>
> *Qemux86-64*
>
>
>
> 82
>
>
>
> 0
>
>
>
> 82
>
>
>
> 0
>
>
>
> 0
>
> *Qemuarm Sato*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
> *Qemuarm Sato-SDK*
>
>
>
> 47
>
>
>
> 0
>
>
>
> 47
>
>
>
> 0
>
>
>
> 0
>
> *Qemumips Sato*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
> *Qemumips Sato-SDK*
>
>
>
> 47
>
>
>
> 0
>
>
>
> 47
>
>
>
> 0
>
>
>
> 0
>
> *Qemuppc Sato*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 42
>
> *Qemuppc Sato-SDK*
>
>
>
> 47
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 47
>
> *Core Build System*
>
>
>
> 78
>
>
>
> 2
>
>
>
> 72
>
>
>
> 4 (bug 3523,3745, 3642)
>
>
>
> 2
>
> *ADT Toolchain*
>
>
>
> 22
>
>
>
> 0
>
>
>
> 20
>
>
>
> 2 (bug 3338, 3758)
>
>
>
> 0
>
> *HOB*
>
>
>
> 38
>
>
>
> 0
>
>
>
> 37
>
>
>
> 1(3001)
>
>
>
> 0
>
> *Compliance*
>
>
>
> 2
>
>
>
> 2
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
> *Stress*
>
>
>
> 2
>
>
>
> 2
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
> *Total*
>
>
>
> 769
>
>
>
> 6
>
>
>
> 580
>
>
>
> 7
>
>
>
> 178
>
>
> * You can check the detailed test result in attachment for each target.
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
>
> *Commit information
> --------------------------------*
> Location: http://autobuilder.yoctoproject.org/pub/nightly/20130115-2
> Tree/Branch: poky/master
> Commit: 9eb88ceb39b7d0b8ddc6487e61ce8edadef10ec4
>
> *
> Issue Summary
> -----------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *System Usage*
>
>
>
> New! 3769 smart: some packages can not be reinstalled
> New! 3768 smart: --yaml option doesn't work
>
>
>
> 1.4
> 1.4
>
> *Others*
>
>
>
> Bug 3476 Autobuilder failing on fsl-ppc
>
>
>
> 1.4 M2
>
> *Core Build System*
>
>
>
> Bug 3642 gtk-demo fails to run for gtk-directfb image
> Bug 3523 Disk space monitoring gives error: Unknown event
> New!Bug 3745 Bitbake remake/remake-native check fail
> New!Bug 3757 Compile and load kernel fail
> New!Bug 3756 Crosstap script fail
>
>
>
> 1.4
> 1.4
> 1.4
> 1.4 M3
> ----
>
> *ADT Toolchain*
>
>
>
> Bug 3338 iptables-1.4.15: autoreconf run failed on gmae-toolchain
> Bug 3758 Package gtk+-2.0 missing from the userbuilt toolchain
>
>
>
> 1.4 M2
> 1.4 M3
>
> *Compliance*
>
>
>
> Not running
>
>
>
> *Stress*
>
>
>
> Not running
>
>
>
>
>
>
>
> *Verified Bugs
> -----------------------------------
> *1. *[Bug 3643]* <http://bugzilla.pokylinux.org/show_bug.cgi?id=3643>:
> smart config --help error: Invalid command 'config'
> 2. *[Bug 3646]* <http://bugzilla.pokylinux.org/show_bug.cgi?id=3646>:
> non GPLv3 build failure with core-image-basic
>
>
> Br,
>
> Alexandru Palalau
>
> QA contractor Yocto Project
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-01-25 22:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-24 15:23 Fullpass Test Report for Yocto 1.4 20130115 Build Palalau, AlexandruX
2013-01-25 22:02 ` Liu, Song
2013-01-25 22:11 ` Saul Wold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.