* [PULL] IIO cleanups, new drivers and fixes (IIO set 3 for the 3.9 cycle)
@ 2013-02-03 11:52 Jonathan Cameron
2013-02-05 19:27 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2013-02-03 11:52 UTC (permalink / raw)
To: Greg KH; +Cc: linux-iio@vger.kernel.org
The following changes since commit 085494ac2039433a5df9fdd6fb653579e18b8c71:
staging: comedi: don't expose comedi_proc_{init,cleanup} (2013-01-31 10:40:41 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-3.9c
for you to fetch changes up to 6cb2afd7c0abb93bd9dc6d36b858b1e312e2407d:
iio: Simplify iio_map_array_unregister API (2013-02-02 12:02:20 +0000)
----------------------------------------------------------------
Third set of IIO new drivers, cleanups and fixes for the 3.9 cycle
New drivers
1) A driver for ST microelectronics sensors. This driver already covers
a large set of new parts (20 gyros, accelerometer and magnetometers)
not currently covered by the existing drivers. The intent moving forward
is to merge this with the other drivers for similar parts already in tree.
The lis3l02dq driver currently in staging/iio will be trivial, the lis3
driver in misc more complex as it has a number of additional interfaces.
Any merging in of the lis3 driver will rely on the not currently
merged iio_input bridge driver and handling of freefall notifications
etc.
2) A driver for the itg3200 gyroscope.
Graduations from staging
1) Cleanup and move out of staging of the adxrs450 gyroscope driver. The
cleanup required was all minor but there were a couple of fixes hidden in
there.
Core and driver additions
1) Initial work from Guenter Roeck on device tree support for IIO's provider/
consumer code. Focuses on the iio_hwmon driver and the max1363 adc driver.
The full device tree syntax is currently under discussion but should
follow shortly.
Cleanups and fixes
1) Remove a noop function __iio_update_buffer
2) Couple of small fixes and cleanups for the max1363
----------------------------------------------------------------
Denis CIOCCA (1):
iio:common: removed unused functions outside st_sensors library
Denis Ciocca (4):
iio:common: Add STMicroelectronics common library
iio:accel: Add STMicroelectronics accelerometers driver
iio:gyro: Add STMicroelectronics gyroscopes driver
iio:magnetometer: Add STMicroelectronics magnetometers driver
Guenter Roeck (9):
staging/iio: (iio_hwmon) Use devm_kzalloc
staging/iio: (iio_hwmon) Add support for sysfs name attribute
staging/iio: (iio_hwmon) Basic devicetree support
iio/adc: (lp8788) Provide OF node information to iio device
iio/adc: (max1363) Provide OF node information to iio device
iio/adc: (max1363) Remove duplicate code
iio/adc: (max1363) Fix data conversion problems
iio: Update iio_channel_get_all and iio_channel_get_all_cb API
iio: Simplify iio_map_array_unregister API
Lars-Peter Clausen (12):
staging:iio: Remove noop call to __iio_update_buffer
Partially revert "staging:iio:gyro:adxrs450 make more use of spi_read and spi_write."
staging:iio:adxrs450: Make transfer buffers __be32
staging:iio:adxrs450: Perform sign extension for the calibbias register
staging:iio:adxrs450: Reject out of range calibscale values
staging:iio:adxrs450: Don't spam the bootlog
staging:iio:adxrs450: Reflow overlong lines
staging:iio:adxrs450: Don't split string across multiple lines
staging:iio:adxrs450: Use usleep_range for the sequential transfer dealy
staging:iio:adxrs450: Fixup kernel doc comments
staging:iio:adxrs450: Move header file contents to main file
staging:iio: Move adxrs450 driver out of staging
Manuel Stahl (1):
iio: gyro: Add itg3200
drivers/iio/accel/Kconfig | 31 ++
drivers/iio/accel/Makefile | 8 +
drivers/iio/accel/st_accel.h | 47 ++
drivers/iio/accel/st_accel_buffer.c | 114 +++++
drivers/iio/accel/st_accel_core.c | 495 +++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 87 ++++
drivers/iio/accel/st_accel_spi.c | 86 ++++
drivers/iio/adc/lp8788_adc.c | 12 +-
drivers/iio/adc/max1363.c | 12 +-
drivers/iio/buffer_cb.c | 4 +-
drivers/iio/common/Kconfig | 1 +
drivers/iio/common/Makefile | 1 +
drivers/iio/common/st_sensors/Kconfig | 14 +
drivers/iio/common/st_sensors/Makefile | 10 +
drivers/iio/common/st_sensors/st_sensors_buffer.c | 116 +++++
drivers/iio/common/st_sensors/st_sensors_core.c | 446 +++++++++++++++++++
drivers/iio/common/st_sensors/st_sensors_i2c.c | 81 ++++
drivers/iio/common/st_sensors/st_sensors_spi.c | 128 ++++++
drivers/iio/common/st_sensors/st_sensors_trigger.c | 77 ++++
drivers/iio/gyro/Kconfig | 48 ++
drivers/iio/gyro/Makefile | 13 +
.../gyro/adxrs450_core.c => iio/gyro/adxrs450.c} | 197 +++++---
drivers/iio/gyro/itg3200_buffer.c | 156 +++++++
drivers/iio/gyro/itg3200_core.c | 401 +++++++++++++++++
drivers/iio/gyro/st_gyro.h | 45 ++
drivers/iio/gyro/st_gyro_buffer.c | 114 +++++
drivers/iio/gyro/st_gyro_core.c | 363 +++++++++++++++
drivers/iio/gyro/st_gyro_i2c.c | 85 ++++
drivers/iio/gyro/st_gyro_spi.c | 84 ++++
drivers/iio/inkern.c | 42 +-
drivers/iio/kfifo_buf.c | 1 -
drivers/iio/magnetometer/Kconfig | 30 ++
drivers/iio/magnetometer/Makefile | 7 +
drivers/iio/magnetometer/st_magn.h | 45 ++
drivers/iio/magnetometer/st_magn_buffer.c | 98 ++++
drivers/iio/magnetometer/st_magn_core.c | 401 +++++++++++++++++
drivers/iio/magnetometer/st_magn_i2c.c | 81 ++++
drivers/iio/magnetometer/st_magn_spi.c | 80 ++++
drivers/staging/iio/gyro/Kconfig | 10 -
drivers/staging/iio/gyro/Makefile | 3 -
drivers/staging/iio/gyro/adxrs450.h | 62 ---
drivers/staging/iio/iio_hwmon.c | 83 ++--
include/linux/iio/buffer.h | 13 -
include/linux/iio/common/st_sensors.h | 270 +++++++++++
include/linux/iio/common/st_sensors_i2c.h | 20 +
include/linux/iio/common/st_sensors_spi.h | 20 +
include/linux/iio/consumer.h | 9 +-
include/linux/iio/driver.h | 9 +-
include/linux/iio/gyro/itg3200.h | 154 +++++++
49 files changed, 4455 insertions(+), 259 deletions(-)
create mode 100644 drivers/iio/accel/st_accel.h
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 drivers/iio/common/st_sensors/Kconfig
create mode 100644 drivers/iio/common/st_sensors/Makefile
create mode 100644 drivers/iio/common/st_sensors/st_sensors_buffer.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_core.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_i2c.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_spi.c
create mode 100644 drivers/iio/common/st_sensors/st_sensors_trigger.c
rename drivers/{staging/iio/gyro/adxrs450_core.c => iio/gyro/adxrs450.c} (68%)
create mode 100644 drivers/iio/gyro/itg3200_buffer.c
create mode 100644 drivers/iio/gyro/itg3200_core.c
create mode 100644 drivers/iio/gyro/st_gyro.h
create mode 100644 drivers/iio/gyro/st_gyro_buffer.c
create mode 100644 drivers/iio/gyro/st_gyro_core.c
create mode 100644 drivers/iio/gyro/st_gyro_i2c.c
create mode 100644 drivers/iio/gyro/st_gyro_spi.c
create mode 100644 drivers/iio/magnetometer/st_magn.h
create mode 100644 drivers/iio/magnetometer/st_magn_buffer.c
create mode 100644 drivers/iio/magnetometer/st_magn_core.c
create mode 100644 drivers/iio/magnetometer/st_magn_i2c.c
create mode 100644 drivers/iio/magnetometer/st_magn_spi.c
delete mode 100644 drivers/staging/iio/gyro/adxrs450.h
create mode 100644 include/linux/iio/common/st_sensors.h
create mode 100644 include/linux/iio/common/st_sensors_i2c.h
create mode 100644 include/linux/iio/common/st_sensors_spi.h
create mode 100644 include/linux/iio/gyro/itg3200.h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-05 19:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-03 11:52 [PULL] IIO cleanups, new drivers and fixes (IIO set 3 for the 3.9 cycle) Jonathan Cameron
2013-02-05 19:27 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.