From: manjunath.goudar@linaro.org (manjunath.goudar at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/8] USB: EHCI: make ehci-orion a separate driver
Date: Mon, 11 Feb 2013 00:28:17 +0530 [thread overview]
Message-ID: <5117ee24.860e440a.097c.352a@mx.google.com> (raw)
In-Reply-To: <1360522697-22902-1-git-send-email-y>
From: Manjunath Goudar <manjunath.goudar@linaro.org>
Separate the Marvell Orion host controller driver from ehci-hcd host code
into its own driver module.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
drivers/usb/host/Kconfig | 8 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +--
drivers/usb/host/ehci-orion.c | 91 +++++++++++++++++++----------------------
4 files changed, 53 insertions(+), 53 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d1d1b09..18bfbfa 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -162,6 +162,14 @@ config USB_EHCI_HCD_OMAP
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
+config USB_EHCI_HCD_ORION
+ tristate "Support for Marvell Orion on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_ORION
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ Morvell Orion chips.
+
config USB_EHCI_HCD_VT8500
tristate "Support for VT8500 on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_VT8500
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e169ba1..fe20e98 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_MV) += ehci-mv.o
obj-$(CONFIG_USB_EHCI_HCD_VT8500)+= ehci-vt8500.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
+obj-$(CONFIG_USB_EHCI_HCD_ORION)+= ehci-orion.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5fab5fa..4c2a795 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1282,11 +1282,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_tilegx_driver
#endif
-#ifdef CONFIG_PLAT_ORION
-#include "ehci-orion.c"
-#define PLATFORM_DRIVER ehci_orion_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
#include "ehci-pmcmsp.c"
#define PLATFORM_DRIVER ehci_hcd_msp_driver
@@ -1319,6 +1314,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_ARCH_VT8500) && \
!IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
!IS_ENABLED(CONFIG_USB_W90X900_EHCI) && \
+ !IS_ENABLED(CONFIG_PLAT_ORION) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 914a3ec..06f143b 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -17,6 +17,13 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -34,6 +41,17 @@
#define USB_PHY_IVREF_CTRL 0x440
#define USB_PHY_TST_GRP_CTRL 0x450
+#define DRIVER_DESC "EHCI orion driver"
+
+static const char hcd_name[] = "ehci-orion";
+
+static struct hc_driver __read_mostly ehci_orion_hc_driver;
+
+static const struct ehci_driver_overrides orion_overrides __initdata = {
+ .reset = ehci_setup,
+};
+
+
/*
* Implement Orion USB controller specification guidelines
*/
@@ -104,51 +122,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
wrl(USB_MODE, 0x13);
}
-static const struct hc_driver ehci_orion_hc_driver = {
- .description = hcd_name,
- .product_desc = "Marvell Orion EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
@@ -323,8 +296,6 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
return 0;
}
-MODULE_ALIAS("platform:orion-ehci");
-
static const struct of_device_id ehci_orion_dt_ids[] = {
{ .compatible = "marvell,orion-ehci", },
{},
@@ -336,8 +307,32 @@ static struct platform_driver ehci_orion_driver = {
.remove = __exit_p(ehci_orion_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.driver = {
- .name = "orion-ehci",
+ .name = hcd_name,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ehci_orion_dt_ids),
},
};
+
+static int __init ehci_orion_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
+ return platform_driver_register(&ehci_orion_driver);
+}
+module_init(ehci_orion_init);
+
+static void __exit ehci_orion_cleanup(void)
+{
+ platform_driver_unregister(&ehci_orion_driver);
+}
+module_exit(ehci_orion_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:ehci-orion");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_LICENSE("GPL");
+
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: manjunath.goudar@linaro.org
To: linux-usb@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, patches@linaro.org,
stern@rowland.harvard.edu, arnd@linaro.org,
gregkh@linuxfoundation.org,
Manjunath Goudar <manjunath.goudar@linaro.org>,
Greg KH <greg@kroah.com>, Jason Cooper <jason@lakedaemon.net>,
Andrew Lunn <andrew@lunn.ch>,
Russell King <linux@arm.linux.org.uk>,
linux-kernel@vger.kernel.org
Subject: [PATCH 8/8] USB: EHCI: make ehci-orion a separate driver
Date: Mon, 11 Feb 2013 00:28:17 +0530 [thread overview]
Message-ID: <5117ee24.860e440a.097c.352a@mx.google.com> (raw)
In-Reply-To: <1360522697-22902-1-git-send-email-y>
From: Manjunath Goudar <manjunath.goudar@linaro.org>
Separate the Marvell Orion host controller driver from ehci-hcd host code
into its own driver module.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/usb/host/Kconfig | 8 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +--
drivers/usb/host/ehci-orion.c | 91 +++++++++++++++++++----------------------
4 files changed, 53 insertions(+), 53 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d1d1b09..18bfbfa 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -162,6 +162,14 @@ config USB_EHCI_HCD_OMAP
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
+config USB_EHCI_HCD_ORION
+ tristate "Support for Marvell Orion on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_ORION
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ Morvell Orion chips.
+
config USB_EHCI_HCD_VT8500
tristate "Support for VT8500 on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_VT8500
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e169ba1..fe20e98 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_MV) += ehci-mv.o
obj-$(CONFIG_USB_EHCI_HCD_VT8500)+= ehci-vt8500.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
+obj-$(CONFIG_USB_EHCI_HCD_ORION)+= ehci-orion.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5fab5fa..4c2a795 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1282,11 +1282,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_tilegx_driver
#endif
-#ifdef CONFIG_PLAT_ORION
-#include "ehci-orion.c"
-#define PLATFORM_DRIVER ehci_orion_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
#include "ehci-pmcmsp.c"
#define PLATFORM_DRIVER ehci_hcd_msp_driver
@@ -1319,6 +1314,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_ARCH_VT8500) && \
!IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
!IS_ENABLED(CONFIG_USB_W90X900_EHCI) && \
+ !IS_ENABLED(CONFIG_PLAT_ORION) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 914a3ec..06f143b 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -17,6 +17,13 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -34,6 +41,17 @@
#define USB_PHY_IVREF_CTRL 0x440
#define USB_PHY_TST_GRP_CTRL 0x450
+#define DRIVER_DESC "EHCI orion driver"
+
+static const char hcd_name[] = "ehci-orion";
+
+static struct hc_driver __read_mostly ehci_orion_hc_driver;
+
+static const struct ehci_driver_overrides orion_overrides __initdata = {
+ .reset = ehci_setup,
+};
+
+
/*
* Implement Orion USB controller specification guidelines
*/
@@ -104,51 +122,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
wrl(USB_MODE, 0x13);
}
-static const struct hc_driver ehci_orion_hc_driver = {
- .description = hcd_name,
- .product_desc = "Marvell Orion EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
@@ -323,8 +296,6 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
return 0;
}
-MODULE_ALIAS("platform:orion-ehci");
-
static const struct of_device_id ehci_orion_dt_ids[] = {
{ .compatible = "marvell,orion-ehci", },
{},
@@ -336,8 +307,32 @@ static struct platform_driver ehci_orion_driver = {
.remove = __exit_p(ehci_orion_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.driver = {
- .name = "orion-ehci",
+ .name = hcd_name,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ehci_orion_dt_ids),
},
};
+
+static int __init ehci_orion_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
+ return platform_driver_register(&ehci_orion_driver);
+}
+module_init(ehci_orion_init);
+
+static void __exit ehci_orion_cleanup(void)
+{
+ platform_driver_unregister(&ehci_orion_driver);
+}
+module_exit(ehci_orion_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:ehci-orion");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_LICENSE("GPL");
+
--
1.7.9.5
next prev parent reply other threads:[~2013-02-10 18:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1360522697-22902-1-git-send-email-y>
2013-02-10 18:58 ` [PATCH 1/8] USB: EHCI: make ehci-spear a separate driver manjunath.goudar at linaro.org
2013-02-11 4:22 ` Viresh Kumar
2013-02-11 11:19 ` Mark Rutland
2013-02-10 18:58 ` [PATCH 2/8] USB: EHCI: make ehci-atmel " manjunath.goudar at linaro.org
2013-02-10 18:58 ` manjunath.goudar
2013-02-10 18:58 ` [PATCH 3/8] USB: EHCI: make ehci-s5p " manjunath.goudar at linaro.org
2013-02-11 17:40 ` Stephen Warren
2013-02-10 18:58 ` [PATCH 4/8] USB: EHCI: make ehci-mv " manjunath.goudar at linaro.org
2013-02-10 18:58 ` manjunath.goudar
2013-02-10 18:58 ` [PATCH 5/8] USB: EHCI: make ehci-vt8500 " manjunath.goudar at linaro.org
2013-02-10 18:58 ` manjunath.goudar
2013-02-10 18:58 ` [PATCH 6/8] USB: EHCI: make ehci-msm " manjunath.goudar at linaro.org
2013-02-10 18:58 ` manjunath.goudar
2013-02-11 17:37 ` Stephen Warren
2013-02-11 17:37 ` Stephen Warren
2013-02-10 18:58 ` [PATCH 7/8] USB: EHCI: make ehci-w90X900 " manjunath.goudar at linaro.org
2013-02-10 18:58 ` manjunath.goudar
2013-02-10 18:58 ` manjunath.goudar at linaro.org [this message]
2013-02-10 18:58 ` [PATCH 8/8] USB: EHCI: make ehci-orion " manjunath.goudar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5117ee24.860e440a.097c.352a@mx.google.com \
--to=manjunath.goudar@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.