[lm-sensors] Intel DP67BA

[lm-sensors] Intel DP67BA

[Joakim Roubert]

[-- Attachment #1: Type: text/plain, Size: 267 bytes --]

Hi!

I have an Intel DP67BA motherboard, for which I downloaded the DQ67EP
config and modified it somewhat to show useful values for the DP67BA. I
attach the resulting config file if anybody else could have use for it.

BR,

/Joakim
-- 
 http://www.df.lth.se/~jokke/

[-- Attachment #2: DP67BA --]
[-- Type: text/plain, Size: 2000 bytes --]

# Modified version of
# http://www.lm-sensors.org/wiki/Configurations/Intel/DQ67EP
# to correspond to the DP67BA.
#
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.

chip "nct6775-isa-0290"

# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU

label fan2 "CPU fan"
set fan2_min 250 # From IDU

label fan3 "Front fan"
set fan3_min 250 # From IDU

# There is no fan4 on the board
ignore fan4

# Voltages

# Processor Vcc
label	in0		"Vcore"
set	in0_min 	0.6 # From IDU
set	in0_max 	1.6 # From IDU

# This should be "12 Volts", but computations are strange
label	in1		"+12V"
compute	in1		@*10.92,  @/10.92
set	in1_min		12*0.95
set	in1_max		12*1.05

# AVCC(?) - Not shown in BIOS or IDU
label	in2		"AVCC"
set	in2_min		3.1		# same as +3.3V
set	in2_max		3.5		# same as +3.3V

# +3.3 Volts
label	in3		"+3.3V"
set	in3_min		3.1		# from IDU
set	in3_max		3.5		# from IDU

# +5 Volts
label	in4		"+5V"
compute	in4		4.9*@, @/4.9
set	in4_min		4.7		# from IDU
set	in4_max		5.3		# from IDU

# Memory Vcc ("SDRAM Vcc" in IDU)
label	in5		"+1.5V"
compute	in5		1.5*@, @/1.5
set	in5_min		1.4		# from IDU
set	in5_max		1.6		# from IDU

# PCH Vcc
label	in6		"PCH"
set	in6_min		0.6		# from IDU
set	in6_max		1.6		# from IDU

# +3.3 Volt Standby
label	in7		"3VSB"
set	in7_min		3.1		# from IDU
set	in7_max		3.5		# from IDU

# VBAT(?) - Not shown in BIOS or IDU
label	in8		"Vbat"
set	in8_min		3.0
set	in8_max		3.5

# It shows +2.050 V, seems to be not used
ignore	cpu0_vid

#	Temperatures

# Labeled as "SYSTIN"
# Guess!
label	temp1		"DIMM temp"
set	temp1_max 	80		# From IDU
set	temp1_max_hyst 	75		# From IDU

# Labeled as "CPUTIN"
label	temp2		"VR temp"
set	temp2_max 	80		# From IDU
set	temp2_max_hyst 	75		# From IDU

# Labeled as "PECI Agent 0"
# Guess!
label	temp3		"CPU temp"
set	temp3_max 	80		# From IDU
set	temp3_max_hyst 	75		# From IDU

# Labeled as "PCH_CHIP_TEMP"
label	temp7		"PCH temp"

# Labeled as "PECI Agent 1"
# Not used
ignore	temp8

[-- Attachment #3: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors