From: Christopher Hahn <hahnchristopher@arcor.de>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai] kernel configuration problems with ACPI
Date: Thu, 14 Feb 2013 13:58:13 +0100 [thread overview]
Message-ID: <511CDF65.1020907@arcor.de> (raw)
In-Reply-To: <511CD673.2030400@xenomai.org>
Am 14.02.2013 13:20, schrieb Gilles Chanteperdrix:
> On 02/14/2013 01:17 PM, Christopher Hahn wrote:
>
>> Am 14.02.2013 13:12, schrieb hahnchristopher@arcor.de:
>>> Hey guys,
>>>
>>> I'm running the new Xenomai 2.6.2.1 with 3.5.7 Kernel on a x86 machine.
>>> I tried several kernel configurations, but I haven't found the right one yet.
>>>
>>> The PC (ADLD25PC) uses a PEAK-Systems PCIE/104 CAN interface and two serialport devices.
>>>
>>> I have selected the CAN driver and 16550A driver as kernel modules.
>>>
>>>
>>> With kernel configuration "-xenomai4" the serial and can devices works, but there are only 2 CPUs detected - so the hyperthreading cores arn't detected.
>>> And I get a message during bootup "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)."
>>> This is my "best" solution so far - CONFIG_ACPI is completely disabled.
>>>
>>>
>>> In "-xenomai5" configuration is ACPI enabled as you can see in the attached kernel configs.
>>> The mptable message disappears, 4 cores are detected, but serial and can device IRQs get disabled.
>>> The can interface and a usb hub get IRQ 19 - thats solvable for me, but the serialport on IRQ 4 gets disabled and I don't know why. (lspci -v log is also attached)
>>>
>>>
>>> Could you point me in a direction how to combine the advantages of the two configurations?
>>>
>>>
>>> Thank you,
>>>
>>> Christopher
>>
>> Attachments now as txt files
>
> It would be interesting to have the kernel boot logs too.
Sorry, here they are.
I tested these two versions again and recognised that in "-xenomai5" the
CAN interface is working.. so there is "just" the serialport issue (IRQ
4 disabled) left. Everything else seems to work correct.
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.7-xenomai5 (root@shorty) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Fri Feb 1 12:32:04 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f590000-0x000000003f5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f5e3000-0x000000003f5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f5f0000-0x000000003f5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: Advanced Digital Logic, Inc CB4057/ADLS??PC, BIOS 6.00 PG 11/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f590 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 base 03F600000 mask 0FFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] found SMP MP-table at [mem 0x000f3b30-0x000f3b3f] mapped at [c00f3b30]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017fa000-0x017fffff]
[ 0.000000] RAMDISK: [mem 0x2ef82000-0x2f86bfff]
[ 0.000000] ACPI: RSDP 000f7da0 00024 (v02 IntelR)
[ 0.000000] ACPI: XSDT 3f5e3080 00044 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3f5e84c0 000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20120320/tbfadt-579)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20120320/tbfadt-629)
[ 0.000000] ACPI: DSDT 3f5e3200 0529B (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3f590000 00040
[ 0.000000] ACPI: HPET 3f5e8680 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 3f5e8900 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3f5e85c0 000B6 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x3f58ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f58ffff]
[ 0.000000] On node 0 totalpages: 259358
[ 0.000000] free_area_init_node: node 0, pgdat c13f6bc0, node_mem_map f700d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 252 pages used for memmap
[ 0.000000] HighMem zone: 31894 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ3 used by override.
[ 0.000000] ACPI: IRQ4 used by override.
[ 0.000000] ACPI: IRQ7 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x3f600000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f6fbf000 s51904 r0 d21824 u73728
[ 0.000000] pcpu-alloc: s51904 r0 d21824 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257330
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.7-xenomai5 root=UUID=794009c9-d01e-441e-a788-15e682620e24 ro xeno_nucleus.xenomai_gid=1001 quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f590)
[ 0.000000] Memory: 1013244k/1037888k available (2901k kernel code, 24188k reserved, 1186k data, 392k init, 128584k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13fe000 - 0xc1460000 ( 392 kB)
[ 0.000000] .data : 0xc12d5422 - 0xc13fe000 (1186 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d5422 (2901 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[ 0.000000] Interrupt pipeline (release #3)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.650 MHz processor.
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.30 BogoMIPS (lpj=1795650)
[ 0.001012] pid_max: default: 32768 minimum: 301
[ 0.001055] Security Framework initialized
[ 0.001062] SELinux: Disabled at boot.
[ 0.001090] Mount-cache hash table entries: 512
[ 0.002209] Initializing cgroup subsys cpuacct
[ 0.002215] Initializing cgroup subsys devices
[ 0.002220] Initializing cgroup subsys freezer
[ 0.002224] Initializing cgroup subsys net_cls
[ 0.002269] CPU: Physical Processor ID: 0
[ 0.002273] CPU: Processor Core ID: 0
[ 0.002278] mce: CPU supports 5 MCE banks
[ 0.002290] CPU0: Thermal monitoring enabled (TM1)
[ 0.002435] ACPI: Core revision 20120320
[ 0.008084] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.008482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018900] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
[ 0.018998] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.018998] ... version: 3
[ 0.018998] ... bit width: 40
[ 0.018998] ... generic registers: 2
[ 0.018998] ... value mask: 000000ffffffffff
[ 0.018998] ... max period: 000000007fffffff
[ 0.018998] ... fixed-purpose events: 3
[ 0.018998] ... event mask: 0000000700000003
[ 0.018998] CPU 1 irqstacks, hard=f688c000 soft=f688e000
[ 0.001999] Initializing CPU#1
[ 0.018998] Booting Node 0, Processors #1
[ 0.030115] CPU 2 irqstacks, hard=f6896000 soft=f6898000
[ 0.001999] Initializing CPU#2
[ 0.030121] #2
[ 0.042116] CPU 3 irqstacks, hard=f68a0000 soft=f68a2000
[ 0.042123] #3 Ok.
[ 0.001999] Initializing CPU#3
[ 0.055020] Brought up 4 CPUs
[ 0.055031] Total of 4 processors activated (14365.20 BogoMIPS).
[ 0.056199] devtmpfs: initialized
[ 0.057180] PM: Registering ACPI NVS region [mem 0x3f590000-0x3f5e2fff] (339968 bytes)
[ 0.057245] dummy:
[ 0.057339] NET: Registered protocol family 16
[ 0.057559] ACPI: bus type pci registered
[ 0.057670] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.057678] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.057681] PCI: Using MMCONFIG for extended config space
[ 0.057685] PCI: Using configuration type 1 for base access
[ 0.059049] bio: create slab <bio-0> at 0
[ 0.059091] ACPI: Added _OSI(Module Device)
[ 0.059091] ACPI: Added _OSI(Processor Device)
[ 0.059091] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.059091] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.061969] ACPI: EC: Look up EC in DSDT
[ 0.070693] ACPI: Interpreter enabled
[ 0.070714] ACPI: (supports S0 S1 S4 S5)
[ 0.070757] ACPI: Using IOAPIC for interrupt routing
[ 0.079919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.083074] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.083318] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.083326] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.083333] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.083339] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.083346] pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xfebfffff]
[ 0.083432] PCI host bridge to bus 0000:00
[ 0.083440] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.083446] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.083453] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.083459] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.083466] pci_bus 0000:00: root bus resource [mem 0x3f700000-0xfebfffff]
[ 0.083486] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000
[ 0.083545] pci 0000:00:02.0: [8086:a001] type 00 class 0x030000
[ 0.083563] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.083575] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07]
[ 0.083586] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.083597] pci 0000:00:02.0: reg 1c: [mem 0xfdc00000-0xfdcfffff]
[ 0.083646] pci 0000:00:02.1: [8086:a002] type 00 class 0x038000
[ 0.083661] pci 0000:00:02.1: reg 10: [mem 0xfde80000-0xfdefffff]
[ 0.083756] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.083781] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
[ 0.083795] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
[ 0.083808] pci 0000:00:19.0: reg 18: [io 0xfe00-0xfe1f]
[ 0.083871] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.083907] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.083929] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.084008] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.084041] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.084112] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.084150] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.084220] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.084258] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.084311] pci 0000:00:1d.0: reg 20: [io 0xfa00-0xfa1f]
[ 0.084369] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.084422] pci 0000:00:1d.1: reg 20: [io 0xf900-0xf91f]
[ 0.084479] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.084531] pci 0000:00:1d.2: reg 20: [io 0xf800-0xf81f]
[ 0.084594] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.084667] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.084796] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.084821] pci 0000:00:1f.2: reg 10: [io 0xf700-0xf707]
[ 0.084835] pci 0000:00:1f.2: reg 14: [io 0xf600-0xf603]
[ 0.084848] pci 0000:00:1f.2: reg 18: [io 0xf500-0xf507]
[ 0.084861] pci 0000:00:1f.2: reg 1c: [io 0xf400-0xf403]
[ 0.084874] pci 0000:00:1f.2: reg 20: [io 0xf300-0xf31f]
[ 0.084888] pci 0000:00:1f.2: reg 24: [mem 0xfdffc000-0xfdffc7ff]
[ 0.084931] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.084959] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.084981] pci 0000:00:1f.3: reg 10: [mem 0xfdffb000-0xfdffb0ff 64bit]
[ 0.085020] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.085102] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.085111] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.085119] pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.085131] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.085212] pci 0000:02:00.0: [10e3:8111] type 01 class 0x060400
[ 0.085236] pci 0000:02:00.0: reg 10: [mem 0xfd7ff000-0xfd7fffff]
[ 0.085315] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.087014] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[ 0.087023] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.087032] pci 0000:00:1c.3: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.087042] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.087120] pci 0000:03:00.0: [001c:0001] type 00 class 0x028000
[ 0.087148] pci 0000:03:00.0: reg 10: [mem 0xfd6f0000-0xfd6fffff]
[ 0.087167] pci 0000:03:00.0: reg 14: [mem 0xfd6e0000-0xfd6effff]
[ 0.087311] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.087324] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
[ 0.087334] pci 0000:02:00.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.087346] pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.087430] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.087438] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.087446] pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.087457] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.087463] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.087470] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.087476] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.087483] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.087490] pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfebfffff] (subtractive decode)
[ 0.087510] pci_bus 0000:00: on NUMA node 0
[ 0.087518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.087818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.087912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.088015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.088301] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
[ 0.103898] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.104030] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.104155] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.104271] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.104391] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.104506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.104621] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.104736] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.104861] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.104861] vgaarb: loaded
[ 0.104861] vgaarb: bridge control possible 0000:00:02.0
[ 0.105016] PCI: Using ACPI for IRQ routing
[ 0.111244] PCI: pci_cache_line_size set to 64 bytes
[ 0.111327] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.111333] e820: reserve RAM buffer [mem 0x3f590000-0x3fffffff]
[ 0.111584] Switching to clocksource hpet
[ 0.113695] pnp: PnP ACPI init
[ 0.113724] ACPI: bus type pnp registered
[ 0.113937] pnp 00:00: [bus 00-ff]
[ 0.113945] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.113952] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.113958] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.113964] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.113971] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.113977] pnp 00:00: [mem 0x3f700000-0xfebfffff window]
[ 0.114115] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.114267] pnp 00:01: [io 0x0010-0x001f]
[ 0.114274] pnp 00:01: [io 0x0022-0x003f]
[ 0.114280] pnp 00:01: [io 0x0044-0x005f]
[ 0.114285] pnp 00:01: [io 0x0062-0x0063]
[ 0.114291] pnp 00:01: [io 0x0065-0x006f]
[ 0.114297] pnp 00:01: [io 0x0074-0x007f]
[ 0.114303] pnp 00:01: [io 0x0091-0x0093]
[ 0.114308] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.114314] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.114320] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.114326] pnp 00:01: [io 0x0800-0x087f]
[ 0.114332] pnp 00:01: [io 0x0880-0x088f]
[ 0.114429] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.114437] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.114444] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.114453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.114483] pnp 00:02: [dma 4]
[ 0.114490] pnp 00:02: [io 0x0000-0x000f]
[ 0.114496] pnp 00:02: [io 0x0080-0x0090]
[ 0.114501] pnp 00:02: [io 0x0094-0x009f]
[ 0.114507] pnp 00:02: [io 0x00c0-0x00df]
[ 0.114559] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.114673] pnp 00:03: [irq 0 disabled]
[ 0.114694] pnp 00:03: [irq 8]
[ 0.114701] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.114755] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.114819] pnp 00:04: [io 0x0070-0x0073]
[ 0.114874] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.114898] pnp 00:05: [io 0x0061]
[ 0.114957] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.114982] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.114995] pnp 00:06: [irq 13]
[ 0.115070] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.115440] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.115448] pnp 00:07: IRQ 4 override to level, low
[ 0.115460] pnp 00:07: [irq 4]
[ 0.115562] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.115837] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.115845] pnp 00:08: IRQ 3 override to level, low
[ 0.115856] pnp 00:08: [irq 3]
[ 0.115960] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.116255] pnp 00:09: [io 0x02e8-0x02ef]
[ 0.116263] pnp 00:09: IRQ 3 override to level, low
[ 0.116269] pnp 00:09: [irq 3]
[ 0.116359] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.116633] pnp 00:0a: [io 0x02e8-0x02ef]
[ 0.116641] pnp 00:0a: IRQ 3 override to level, low
[ 0.116647] pnp 00:0a: [irq 3]
[ 0.116740] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.117295] pnp 00:0b: [io 0x0378-0x037f]
[ 0.117302] pnp 00:0b: [io 0x0778-0x077b]
[ 0.117309] pnp 00:0b: IRQ 7 override to level, low
[ 0.117321] pnp 00:0b: [irq 7]
[ 0.117327] pnp 00:0b: [dma 3]
[ 0.117428] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.117571] pnp 00:0c: [io 0x0400-0x04bf]
[ 0.117656] system 00:0c: [io 0x0400-0x04bf] has been reserved
[ 0.117665] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117712] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.117776] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.118242] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.118345] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.118354] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.118513] pnp 00:0f: [mem 0x000f0000-0x000fffff]
[ 0.118520] pnp 00:0f: [mem 0x3f600000-0x3f6fffff]
[ 0.118527] pnp 00:0f: [mem 0xfed00000-0xfed000ff]
[ 0.118533] pnp 00:0f: [mem 0x3f590000-0x3f5fffff]
[ 0.118539] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.118545] pnp 00:0f: [mem 0x00100000-0x3f58ffff]
[ 0.118551] pnp 00:0f: [mem 0xfec00000-0xfec00fff]
[ 0.118557] pnp 00:0f: [mem 0xfed13000-0xfed1ffff]
[ 0.118563] pnp 00:0f: [mem 0xfed20000-0xfed9ffff]
[ 0.118569] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[ 0.118575] pnp 00:0f: [mem 0xffb00000-0xffb7ffff]
[ 0.118581] pnp 00:0f: [mem 0xfff00000-0xffffffff]
[ 0.118587] pnp 00:0f: [mem 0x000e0000-0x000effff]
[ 0.118703] system 00:0f: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.118711] system 00:0f: [mem 0x3f600000-0x3f6fffff] could not be reserved
[ 0.118718] system 00:0f: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.118725] system 00:0f: [mem 0x3f590000-0x3f5fffff] could not be reserved
[ 0.118732] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.118739] system 00:0f: [mem 0x00100000-0x3f58ffff] could not be reserved
[ 0.118747] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.118754] system 00:0f: [mem 0xfed13000-0xfed1ffff] has been reserved
[ 0.118761] system 00:0f: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.118768] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.118775] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.118782] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.118789] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
[ 0.118797] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.118820] pnp: PnP ACPI: found 16 devices
[ 0.118824] ACPI: ACPI bus type pnp unregistered
[ 0.118831] PnPBIOS: Disabled by ACPI PNP
[ 0.158365] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.158376] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.158385] pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.158395] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.158405] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.158413] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
[ 0.158424] pci 0000:02:00.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.158434] pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.158446] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[ 0.158453] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.158463] pci 0000:00:1c.3: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.158471] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.158481] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.158488] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.158497] pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.158506] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.158570] pci 0000:00:1e.0: setting latency timer to 64
[ 0.158579] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.158586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.158592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.158598] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.158605] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfebfffff]
[ 0.158611] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.158618] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.158624] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.158631] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.158637] pci_bus 0000:02: resource 1 [mem 0xfd600000-0xfd7fffff]
[ 0.158644] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.158650] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.158657] pci_bus 0000:03: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.158663] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.158670] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.158676] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.158683] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.158689] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.158695] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.158701] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.158708] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.158714] pci_bus 0000:04: resource 8 [mem 0x3f700000-0xfebfffff]
[ 0.158775] NET: Registered protocol family 2
[ 0.158886] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.159147] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.160055] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.160455] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.160460] TCP: reno registered
[ 0.160469] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.160486] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.160633] NET: Registered protocol family 1
[ 0.160666] pci 0000:00:02.0: Boot video device
[ 0.160818] PCI: CLS 32 bytes, default 64
[ 0.160918] Unpacking initramfs...
[ 0.604475] Freeing initrd memory: 9128k freed
[ 0.611773] audit: initializing netlink socket (disabled)
[ 0.611797] type=2000 audit(1360845847.610:1): initialized
[ 0.635541] I-pipe: head domain Xenomai registered.
[ 0.635697] Xenomai: hal/i386 started.
[ 0.635741] Xenomai: scheduling class idle registered.
[ 0.635745] Xenomai: scheduling class rt registered.
[ 0.638365] Xenomai: real-time nucleus v2.6.2.1 (Day At The Beach) loaded.
[ 0.638370] Xenomai: debug mode enabled.
[ 0.638624] Xenomai: starting native API services.
[ 0.638632] Xenomai: starting POSIX services.
[ 0.638689] Xenomai: starting RTDM services.
[ 0.638951] highmem bounce pool size: 64 pages
[ 0.638962] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.642079] VFS: Disk quotas dquot_6.5.2
[ 0.642175] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.642363] msgmni has been set to 1745
[ 0.642817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.642824] io scheduler noop registered
[ 0.642828] io scheduler deadline registered
[ 0.642839] io scheduler cfq registered (default)
[ 0.643368] ACPI: Fan [FAN] (on)
[ 0.643399] isapnp: Scanning for PnP cards...
[ 0.740006] isapnp: No Plug & Play device found
[ 0.999261] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.019816] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.040412] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.061094] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.081908] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.102601] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.123279] 00:09: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.143950] 00:0a: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.144214] Linux agpgart interface v0.103
[ 1.144370] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.144469] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.144647] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.144855] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.145169] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.396415] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.396629] mousedev: PS/2 mouse device common for all mice
[ 1.396719] rtc_cmos 00:04: RTC can wake from S4
[ 1.396903] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.396938] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.397031] drop_monitor: Initializing network drop monitor service
[ 1.397201] TCP: cubic registered
[ 1.397429] NET: Registered protocol family 10
[ 1.397747] mip6: Mobile IPv6
[ 1.397754] NET: Registered protocol family 17
[ 1.397777] Key type dns_resolver registered
[ 1.397844] Using IPI No-Shortcut mode
[ 1.398111] PM: Hibernation image not present or could not be loaded.
[ 1.398131] registered taskstats version 1
[ 1.398638] rtc_cmos 00:04: setting system clock to 2013-02-14 12:44:08 UTC (1360845848)
[ 1.398889] Freeing unused kernel memory: 392k freed
[ 1.399163] Write protecting the kernel text: 2904k
[ 1.399201] Write protecting the kernel read-only data: 952k
[ 1.432873] udev[56]: starting version 164
[ 1.493391] SCSI subsystem initialized
[ 1.493439] ACPI: bus type usb registered
[ 1.493526] usbcore: registered new interface driver usbfs
[ 1.493565] usbcore: registered new interface driver hub
[ 1.497452] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 1.497461] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 1.497563] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.497739] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.509156] usbcore: registered new device driver usb
[ 1.510475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.511564] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.513912] libata version 3.00 loaded.
[ 1.612039] Refined TSC clocksource calibration: 1795.499 MHz.
[ 1.612052] Switching to clocksource tsc
[ 1.695347] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:01:05:0e:61:9d
[ 1.695357] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.695398] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 1.695486] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.695496] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.695513] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.695575] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00
[ 1.695657] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.695664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.695670] usb usb1: Product: UHCI Host Controller
[ 1.695676] usb usb1: Manufacturer: Linux 3.5.7-xenomai5 uhci_hcd
[ 1.695682] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.695958] hub 1-0:1.0: USB hub found
[ 1.695970] hub 1-0:1.0: 2 ports detected
[ 1.696165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.696173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.696186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.696237] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900
[ 1.696308] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.696315] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.696321] usb usb2: Product: UHCI Host Controller
[ 1.696326] usb usb2: Manufacturer: Linux 3.5.7-xenomai5 uhci_hcd
[ 1.696332] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.696591] hub 2-0:1.0: USB hub found
[ 1.696603] hub 2-0:1.0: 2 ports detected
[ 1.696749] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.696757] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.696770] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.696822] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800
[ 1.696893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.696900] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.696906] usb usb3: Product: UHCI Host Controller
[ 1.696912] usb usb3: Manufacturer: Linux 3.5.7-xenomai5 uhci_hcd
[ 1.696918] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.697176] hub 3-0:1.0: USB hub found
[ 1.697189] hub 3-0:1.0: 2 ports detected
[ 1.697385] ahci 0000:00:1f.2: version 3.0
[ 1.697593] ahci: SSS flag set, parallel bus scan disabled
[ 1.697660] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.697673] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 1.697686] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.704614] scsi0 : ahci
[ 1.704838] scsi1 : ahci
[ 1.705059] scsi2 : ahci
[ 1.705686] scsi3 : ahci
[ 1.705905] scsi4 : ahci
[ 1.706309] scsi5 : ahci
[ 1.706832] ata1: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc100 irq 22
[ 1.706841] ata2: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc180 irq 22
[ 1.706845] ata3: DUMMY
[ 1.706849] ata4: DUMMY
[ 1.706854] ata5: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc300 irq 22
[ 1.706860] ata6: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc380 irq 22
[ 1.997035] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 2.011036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.011374] ata1.00: ATA-8: INTEL SSDSA1NW080G3, 4PC10302, max UDMA/133
[ 2.011381] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.011741] ata1.00: configured for UDMA/133
[ 2.011974] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA1NW08 4PC1 PQ: 0 ANSI: 5
[ 2.161663] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[ 2.161673] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.161679] usb 1-1: Product: USB Receiver
[ 2.161684] usb 1-1: Manufacturer: Logitech
[ 2.185775] usbcore: registered new interface driver usbhid
[ 2.185783] usbhid: USB HID core driver
[ 2.270033] usb 1-2: new full-speed USB device number 3 using uhci_hcd
[ 2.317039] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.435658] usb 1-2: New USB device found, idVendor=046d, idProduct=c318
[ 2.435666] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.435672] usb 1-2: Product: Logitech Illuminated Keyboard
[ 2.435678] usb 1-2: Manufacturer: Logitech
[ 2.622036] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.927032] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.937672] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.937975] sd 0:0:0:0: [sda] Write Protect is off
[ 2.937986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.938091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.939500] sda: sda1 sda2 < sda5 >
[ 2.940431] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.053209] kjournald starting. Commit interval 5 seconds
[ 3.053257] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 3.357806] udev[312]: starting version 164
[ 3.459919] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.463268] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.472544] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.472562] ACPI: Power Button [PWRB]
[ 3.472798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.472809] ACPI: Power Button [PWRF]
[ 3.510105] parport_pc 00:0b: reported by Plug and Play ACPI
[ 3.510175] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 3.513380] RT-Socket-CAN 0.90.2 - (C) 2006 RT-Socket-CAN Development Team
[ 3.514746] RTCAN SJA1000 driver initialized
[ 3.515666] PEAK-PCI-CAN: initializing device 001c:0001
[ 3.520910] PEAK-PCI-CAN: base_addr=f8558000 conf_addr=f8556000 irq=19
[ 3.520961] rtcan: registered rtcan0
[ 3.521011] PEAK-PCI-CAN: base_addr=f855a400 conf_addr=f8556000 irq=19
[ 3.521081] rtcan: registered rtcan1
[ 3.523708] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251)
[ 3.523732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.523739] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 3.523748] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20120320/utaddress-251)
[ 3.523763] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.523772] ACPI Warning: 0x00000580-0x000005bf SystemIO conflicts with Region \GPO2 1 (20120320/utaddress-251)
[ 3.523786] ACPI Warning: 0x00000580-0x000005bf SystemIO conflicts with Region \GPO_ 2 (20120320/utaddress-251)
[ 3.523801] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.523807] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.544955] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.547740] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input3
[ 3.548049] hid-generic 0003:046D:C318.0004: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-2/input0
[ 3.550053] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input4
[ 3.550495] hid-generic 0003:046D:C318.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-2/input1
[ 3.556260] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2
[ 3.560613] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/input/input5
[ 3.560936] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1:1
[ 3.574805] microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
[ 3.600851] hda_codec: ALC889: SKU not ready 0x90100000
[ 3.604325] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 3.615863] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.615990] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.616192] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.616344] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.616496] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.616651] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.745913] microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
[ 3.769409] microcode: CPU2 sig=0x106ca, pf=0x8, revision=0x107
[ 3.780682] microcode: CPU3 sig=0x106ca, pf=0x8, revision=0x107
[ 3.789441] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.134860] EXT3-fs (sda1): using internal journal
[ 4.173087] loop: module loaded
[ 4.200632] ACPI Warning: 0x00000870-0x00000871 SystemIO conflicts with Region \SMGP 1 (20120320/utaddress-251)
[ 4.200658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.337896] kjournald starting. Commit interval 5 seconds
[ 4.338065] EXT3-fs (sda5): using internal journal
[ 4.338072] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 4.558242] fuse init (API version 7.19)
[ 5.326320] Bluetooth: Core ver 2.16
[ 5.326381] NET: Registered protocol family 31
[ 5.326388] Bluetooth: HCI device and connection manager initialized
[ 5.326892] Bluetooth: HCI socket layer initialized
[ 5.326903] Bluetooth: L2CAP socket layer initialized
[ 5.326923] Bluetooth: SCO socket layer initialized
[ 5.382464] lp0: using parport0 (interrupt-driven).
[ 5.391939] ppdev: user-space parallel port driver
[ 5.510080] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 154.767572] Xenomai: xnintr_edge_shirq_handler: IRQ4 not handled. Disabling IRQ line.
-------------- next part --------------
# lspci -v
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
Subsystem: Intel Corporation N10 Family DMI Bridge
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=08 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation N10 Family Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ff00 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at fdc00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
Subsystem: Intel Corporation Device a001
Flags: fast devsel
Memory at fde80000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: [d0] Power Management version 2
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Intel Corporation 82567LM Gigabit Network Connection
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fe00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Intel Corporation Optiplex 755
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation Optiplex 755
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd600000-fd7fffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at fa00 [size=32]
Capabilities: [50] Vendor Specific Information: Len=06 <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at f900 [size=32]
Capabilities: [50] Vendor Specific Information: Len=06 <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at f800 [size=32]
Capabilities: [50] Vendor Specific Information: Len=06 <?>
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI Bridge
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Intel Corporation ICH9M-E LPC Interface Controller
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device 2928
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22
I/O ports at f700 [size=8]
I/O ports at f600 [size=4]
I/O ports at f500 [size=8]
I/O ports at f400 [size=4]
I/O ports at f300 [size=32]
Memory at fdffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable- Count=1/16 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Intel Corporation 82801I (ICH9 Family) SMBus Controller
Flags: medium devsel, IRQ 22
Memory at fdffb000 (64-bit, non-prefetchable) [size=256]
I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 PCI bridge: Tundra Semiconductor Corp. Device 8111 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Memory at fd7ff000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd600000-fd6fffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Capabilities: [80] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [a0] Power Management version 3
Capabilities: [c0] Express PCI/PCI-X Bridge, MSI 00
Capabilities: [100] Advanced Error Reporting
03:00.0 Network controller: PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller (rev 02)
Subsystem: PEAK-System Technik GmbH 2 Channel CAN Bus SJC1000 (Optically Isolated)
Flags: medium devsel, IRQ 19
Memory at fd6f0000 (32-bit, non-prefetchable) [size=64K]
Memory at fd6e0000 (32-bit, non-prefetchable) [size=64K]
Kernel driver in use: PEAK-PCI-CAN
-------------- next part --------------
# lspci -v
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
Subsystem: Intel Corporation N10 Family DMI Bridge
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=08 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation N10 Family Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 9
Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ff00 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at fdc00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
Subsystem: Intel Corporation Device a001
Flags: fast devsel
Memory at fde80000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: [d0] Power Management version 2
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Intel Corporation 82567LM Gigabit Network Connection
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fe00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Intel Corporation Optiplex 755
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation Optiplex 755
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd600000-fd7fffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at fa00 [size=32]
Capabilities: [50] Vendor Specific Information: Len=06 <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at f900 [size=32]
Capabilities: [50] Vendor Specific Information: Len=06 <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at f800 [size=32]
Capabilities: [50] Vendor Specific Information: Len=06 <?>
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI Bridge
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Intel Corporation ICH9M-E LPC Interface Controller
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device 2928
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
I/O ports at f700 [size=8]
I/O ports at f600 [size=4]
I/O ports at f500 [size=8]
I/O ports at f400 [size=4]
I/O ports at f300 [size=32]
Memory at fdffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable- Count=1/16 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Intel Corporation 82801I (ICH9 Family) SMBus Controller
Flags: medium devsel, IRQ 11
Memory at fdffb000 (64-bit, non-prefetchable) [size=256]
I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 PCI bridge: Tundra Semiconductor Corp. Device 8111 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Memory at fd7ff000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd600000-fd6fffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Capabilities: [80] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [a0] Power Management version 3
Capabilities: [c0] Express PCI/PCI-X Bridge, MSI 00
03:00.0 Network controller: PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller (rev 02)
Subsystem: PEAK-System Technik GmbH 2 Channel CAN Bus SJC1000 (Optically Isolated)
Flags: medium devsel, IRQ 5
Memory at fd6f0000 (32-bit, non-prefetchable) [size=64K]
Memory at fd6e0000 (32-bit, non-prefetchable) [size=64K]
Kernel driver in use: PEAK-PCI-CAN
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.7-xenomai4 (root@shorty) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Jan 31 12:42:30 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f590000-0x000000003f5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f5e3000-0x000000003f5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f5f0000-0x000000003f5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: Advanced Digital Logic, Inc CB4057/ADLS??PC, BIOS 6.00 PG 11/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f590 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 base 03F600000 mask 0FFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] found SMP MP-table at [mem 0x000f3b30-0x000f3b3f] mapped at [c00f3b30]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017fa000-0x017fffff]
[ 0.000000] RAMDISK: [mem 0x2ef83000-0x2f86bfff]
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x3f58ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f58ffff]
[ 0.000000] On node 0 totalpages: 259358
[ 0.000000] free_area_init_node: node 0, pgdat c13c1240, node_mem_map f700d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 252 pages used for memmap
[ 0.000000] HighMem zone: 31894 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Unknown bustype PCÊ\x06\x01 - ignoring
[ 0.000000] Your mptable is wrong, contact your HW vendor!
[ 0.000000] type ca
[ 0.000000] ffc38ee4: 50 43 4d 50 6c 01 04 88 4f 45 4d 30 30 30 30 30 PCMPl...OEM00000
[ 0.000000] ffc38ef4: 50 52 4f 44 30 30 30 30 30 30 30 30 00 00 00 00 PROD00000000....
[ 0.000000] ffc38f04: 00 00 25 00 00 00 e0 fe 00 00 00 00 00 00 11 03 ..%.............
[ 0.000000] ffc38f14: ca 06 01 00 ff fb 00 00 00 00 00 00 00 00 00 00 ................
[ 0.000000] ffc38f24: 00 01 11 01 ca 06 01 00 ff fb 00 00 00 00 00 00 ................
[ 0.000000] ffc38f34: 00 00 00 00 01 02 50 43 ca 06 01 00 01 01 50 43 ......PC......PC
[ 0.000000] ffc38f44: 49 20 20 20 01 02 50 43 49 03 20 20 ca 06 01 00 I ..PCI. ....
[ 0.000000] ffc38f54: 49 20 20 20 01 04 50 43 49 20 20 20 01 05 49 53 I ..PCI ..IS
[ 0.000000] ffc38f64: 41 20 20 20 02 04 11 01 00 00 c0 fe 03 00 0f 00 A ............
[ 0.000000] ffc38f74: 00 7d 04 16 03 00 0f 00 00 69 04 15 03 00 0f 00 .}.......i......
[ 0.000000] ffc38f84: 00 6b 04 13 03 00 0f 00 00 74 04 17 03 00 0f 00 .k.......t......
[ 0.000000] ffc38f94: 00 75 04 13 03 00 0f 00 00 76 04 12 03 00 0f 00 .u.......v......
[ 0.000000] ffc38fa4: 00 73 04 13 03 00 0f 00 00 70 04 10 03 00 0f 00 .s.......p......
[ 0.000000] ffc38fb4: 00 6c 04 16 03 00 0f 00 00 08 04 10 03 00 0f 00 .l..............
[ 0.000000] ffc38fc4: 03 00 04 13 03 00 0f 00 00 64 04 14 03 00 0f 00 .........d......
[ 0.000000] ffc38fd4: 00 7d 04 16 03 00 0f 00 00 7c 04 10 03 03 00 00 .}.......|......
[ 0.000000] ffc38fe4: 05 00 04 00 03 00 00 00 05 01 04 01 03 00 00 00 ................
[ 0.000000] ffc38ff4: 05 00 04 02 03 00 00 00 05 03 04 03 03 00 00 00 ................
[ 0.000000] ffc39004: 05 04 04 04 03 00 00 00 05 06 04 06 03 00 00 00 ................
[ 0.000000] ffc39014: 05 07 04 07 03 00 05 00 05 08 04 08 03 00 00 00 ................
[ 0.000000] ffc39024: 05 0c 04 0c 03 00 00 00 05 0d 04 0d 03 00 00 00 ................
[ 0.000000] ffc39034: 05 0e 04 0e 03 00 00 00 05 0f 04 0f 04 03 00 00 ................
[ 0.000000] ffc39044: 00 00 ff 00 04 01 00 00 00 00 ff 01 ............
[ 0.000000] BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x3f600000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f6fe3000 s51904 r0 d21824 u73728
[ 0.000000] pcpu-alloc: s51904 r0 d21824 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257330
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.7-xenomai4 root=UUID=794009c9-d01e-441e-a788-15e682620e24 ro xeno_nucleus.xenomai_gid=1001 quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f590)
[ 0.000000] Memory: 1013640k/1037888k available (2756k kernel code, 23792k reserved, 1117k data, 356k init, 128584k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13c9000 - 0xc1422000 ( 356 kB)
[ 0.000000] .data : 0xc12b110e - 0xc13c8640 (1117 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b110e (2756 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:288 16
[ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[ 0.000000] Interrupt pipeline (release #3)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.561 MHz processor.
[ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.12 BogoMIPS (lpj=1795561)
[ 0.002011] pid_max: default: 32768 minimum: 301
[ 0.002054] Security Framework initialized
[ 0.002061] SELinux: Disabled at boot.
[ 0.002093] Mount-cache hash table entries: 512
[ 0.003209] Initializing cgroup subsys cpuacct
[ 0.003215] Initializing cgroup subsys devices
[ 0.003219] Initializing cgroup subsys freezer
[ 0.003224] Initializing cgroup subsys net_cls
[ 0.003268] CPU: Physical Processor ID: 0
[ 0.003272] CPU: Processor Core ID: 0
[ 0.003276] mce: CPU supports 5 MCE banks
[ 0.003288] CPU0: Thermal monitoring enabled (TM1)
[ 0.003497] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.003506] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
[ 0.105006] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.105021] ... version: 3
[ 0.105025] ... bit width: 40
[ 0.105028] ... generic registers: 2
[ 0.105032] ... value mask: 000000ffffffffff
[ 0.105035] ... max period: 000000007fffffff
[ 0.105039] ... fixed-purpose events: 3
[ 0.105042] ... event mask: 0000000700000003
[ 0.105460] CPU 1 irqstacks, hard=f6856000 soft=f6860000
[ 0.105465] Booting Node 0, Processors #1 Ok.
[ 0.002999] Initializing CPU#1
[ 0.117017] Brought up 2 CPUs
[ 0.117027] Total of 2 processors activated (7182.24 BogoMIPS).
[ 0.118109] devtmpfs: initialized
[ 0.118306] dummy:
[ 0.118306] NET: Registered protocol family 16
[ 0.153309] PCI: PCI BIOS revision 3.00 entry at 0xf9620, last bus=4
[ 0.153314] PCI: Using configuration type 1 for base access
[ 0.154141] bio: create slab <bio-0> at 0
[ 0.155081] vgaarb: loaded
[ 0.155081] PCI: Probing PCI hardware
[ 0.155081] PCI: root bus 00: using default resources
[ 0.155084] PCI: Probing PCI hardware (bus 00)
[ 0.155126] PCI host bridge to bus 0000:00
[ 0.155135] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.155142] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.155161] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000
[ 0.155220] pci 0000:00:02.0: [8086:a001] type 00 class 0x030000
[ 0.155237] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.155249] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07]
[ 0.155260] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.155271] pci 0000:00:02.0: reg 1c: [mem 0xfdc00000-0xfdcfffff]
[ 0.155320] pci 0000:00:02.1: [8086:a002] type 00 class 0x038000
[ 0.155335] pci 0000:00:02.1: reg 10: [mem 0xfde80000-0xfdefffff]
[ 0.155335] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.155335] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
[ 0.155335] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
[ 0.155335] pci 0000:00:19.0: reg 18: [io 0xfe00-0xfe1f]
[ 0.155335] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.155335] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.155335] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.155335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.155335] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.155346] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.155379] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.155451] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.155487] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.155540] pci 0000:00:1d.0: reg 20: [io 0xfa00-0xfa1f]
[ 0.155597] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.155649] pci 0000:00:1d.1: reg 20: [io 0xf900-0xf91f]
[ 0.155706] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.155758] pci 0000:00:1d.2: reg 20: [io 0xf800-0xf81f]
[ 0.155820] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.155891] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.156028] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.156054] pci 0000:00:1f.2: reg 10: [io 0xf700-0xf707]
[ 0.156068] pci 0000:00:1f.2: reg 14: [io 0xf600-0xf603]
[ 0.156081] pci 0000:00:1f.2: reg 18: [io 0xf500-0xf507]
[ 0.156094] pci 0000:00:1f.2: reg 1c: [io 0xf400-0xf403]
[ 0.156107] pci 0000:00:1f.2: reg 20: [io 0xf300-0xf31f]
[ 0.156121] pci 0000:00:1f.2: reg 24: [mem 0xfdffc000-0xfdffc7ff]
[ 0.156164] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.156192] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.156214] pci 0000:00:1f.3: reg 10: [mem 0xfdffb000-0xfdffb0ff 64bit]
[ 0.156242] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.156326] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.156335] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.156343] pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.156354] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.156429] pci 0000:02:00.0: [10e3:8111] type 01 class 0x060400
[ 0.156450] pci 0000:02:00.0: reg 10: [mem 0xfd7ff000-0xfd7fffff]
[ 0.156529] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.159006] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[ 0.159015] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.159023] pci 0000:00:1c.3: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.159034] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.159116] pci 0000:03:00.0: [001c:0001] type 00 class 0x028000
[ 0.159142] pci 0000:03:00.0: reg 10: [mem 0xfd6f0000-0xfd6fffff]
[ 0.159162] pci 0000:03:00.0: reg 14: [mem 0xfd6e0000-0xfd6effff]
[ 0.159304] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.159317] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
[ 0.159326] pci 0000:02:00.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.159339] pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.159425] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.159434] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.159442] pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.159453] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.159459] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.159466] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.159562] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.160359] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2917]
[ 0.160408] PCI: pci_cache_line_size set to 64 bytes
[ 0.160488] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.160494] e820: reserve RAM buffer [mem 0x3f590000-0x3fffffff]
[ 0.163396] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.163487] PnPBIOS: Found PnP BIOS installation structure at 0xc00fa130
[ 0.163493] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa160, dseg 0xf0000
[ 0.163549] pnp 00:00: [irq 2]
[ 0.163556] pnp 00:00: [io 0x0020-0x0021]
[ 0.163562] pnp 00:00: [io 0x00a0-0x00a1]
[ 0.163600] pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active)
[ 0.163616] pnp 00:01: [dma 4]
[ 0.163622] pnp 00:01: [io 0x0000-0x000f]
[ 0.163627] pnp 00:01: [io 0x0081-0x0083]
[ 0.163633] pnp 00:01: [io 0x0087]
[ 0.163639] pnp 00:01: [io 0x0089-0x008b]
[ 0.163645] pnp 00:01: [io 0x008f-0x0091]
[ 0.163650] pnp 00:01: [io 0x00c0-0x00df]
[ 0.163688] pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active)
[ 0.163703] pnp 00:02: [irq 0]
[ 0.163709] pnp 00:02: [io 0x0040-0x0043]
[ 0.163740] pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active)
[ 0.163754] pnp 00:03: [irq 8]
[ 0.163760] pnp 00:03: [io 0x0070-0x0071]
[ 0.163792] pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 0.163806] pnp 00:04: [irq 1]
[ 0.163812] pnp 00:04: [io 0x0060]
[ 0.163817] pnp 00:04: [io 0x0064]
[ 0.163848] pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active)
[ 0.163863] pnp 00:05: [io 0x0061]
[ 0.163902] pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active)
[ 0.163917] pnp 00:06: [irq 13]
[ 0.163923] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.163955] pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 0.163970] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.164016] pnp 00:07: Plug and Play BIOS device, IDs INT0800 (active)
[ 0.164033] pnp 00:08: [mem 0x00000000-0x0009ffff]
[ 0.164039] pnp 00:08: [mem 0xffb00000-0xffb7ffff]
[ 0.164045] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.164051] pnp 00:08: [mem 0xfec00000-0xfec0ffff]
[ 0.164057] pnp 00:08: [mem 0xfee00000-0xfee0ffff]
[ 0.164064] pnp 00:08: [mem 0x00100000-0x00ffffff]
[ 0.164130] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.164139] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.164146] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.164154] system 00:08: [mem 0xfec00000-0xfec0ffff] has been reserved
[ 0.164161] system 00:08: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.164168] system 00:08: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.164176] system 00:08: Plug and Play BIOS device, IDs PNP0c01 (active)
[ 0.164192] pnp 00:09: [mem 0x000f0000-0x000f3fff]
[ 0.164198] pnp 00:09: [mem 0x000f4000-0x000f7fff]
[ 0.164204] pnp 00:09: [mem 0x000f8000-0x000fffff]
[ 0.164210] pnp 00:09: [mem 0x000d4800-0x000d7fff]
[ 0.164270] system 00:09: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.164278] system 00:09: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.164285] system 00:09: [mem 0x000f8000-0x000fffff] could not be reserved
[ 0.164292] system 00:09: [mem 0x000d4800-0x000d7fff] has been reserved
[ 0.164300] system 00:09: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.164316] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.164322] pnp 00:0a: [io 0x0cf8-0x0cff]
[ 0.164328] pnp 00:0a: [io 0x0400-0x04bf]
[ 0.164360] pnp 00:0a: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 0.164430] system 00:0c: Plug and Play BIOS device, IDs PNP0c02 (disabled)
[ 0.164472] pnp 00:0d: [irq 4]
[ 0.164478] pnp 00:0d: [io 0x03f8-0x03ff]
[ 0.164532] pnp 00:0d: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.164582] pnp 00:10: [dma 3]
[ 0.164588] pnp 00:10: [irq 7]
[ 0.164594] pnp 00:10: [io 0x0378-0x037f]
[ 0.164603] pnp 00:10: [io 0x0778-0x077f]
[ 0.164663] pnp 00:10: Plug and Play BIOS device, IDs PNP0401 (active)
[ 0.164704] pnp 00:11: [irq 3]
[ 0.164710] pnp 00:11: [io 0x02f8-0x02ff]
[ 0.164761] pnp 00:11: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.164802] pnp 00:12: [irq 3]
[ 0.164808] pnp 00:12: [io 0x02e8-0x02ef]
[ 0.164859] pnp 00:12: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.164899] pnp 00:13: [irq 3]
[ 0.164906] pnp 00:13: [io 0x02e8-0x02ef]
[ 0.164960] pnp 00:13: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.164971] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 0.169021] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.169026] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.169036] pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.169045] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.169056] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.169063] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
[ 0.169075] pci 0000:02:00.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.169084] pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.169097] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[ 0.169104] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.169113] pci 0000:00:1c.3: bridge window [mem 0xfd600000-0xfd7fffff]
[ 0.169122] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.169132] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.169139] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.169149] pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.169157] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.169175] PCI: setting IRQ 10 as level-triggered
[ 0.169182] pci 0000:00:1c.0: found PCI INT A -> IRQ 10
[ 0.169199] pci 0000:00:1c.0: IRQ routing conflict: have IRQ 9, want IRQ 10
[ 0.169213] pci 0000:00:1c.0: sharing IRQ 10 with 0000:00:1d.2
[ 0.169240] PCI: setting IRQ 5 as level-triggered
[ 0.169246] pci 0000:00:1c.3: assigned PCI INT D -> IRQ 5
[ 0.169295] pci 0000:00:1e.0: setting latency timer to 64
[ 0.169303] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.169310] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.169316] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.169323] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.169330] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.169336] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.169342] pci_bus 0000:02: resource 1 [mem 0xfd600000-0xfd7fffff]
[ 0.169349] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.169356] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.169362] pci_bus 0000:03: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.169369] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.169375] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.169381] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.169389] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.169397] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.169404] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.169467] NET: Registered protocol family 2
[ 0.169572] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.169811] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.170695] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.171116] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.171122] TCP: reno registered
[ 0.171132] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.171149] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.171285] NET: Registered protocol family 1
[ 0.171320] pci 0000:00:02.0: Boot video device
[ 0.171354] PCI: setting IRQ 11 as level-triggered
[ 0.171362] pci 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 0.171433] pci 0000:00:1d.1: found PCI INT B -> IRQ 5
[ 0.171493] pci 0000:00:1d.2: found PCI INT C -> IRQ 10
[ 0.171508] pci 0000:00:1c.0: IRQ routing conflict: have IRQ 9, want IRQ 10
[ 0.171567] PCI: CLS 32 bytes, default 64
[ 0.171660] Unpacking initramfs...
[ 0.614953] Freeing initrd memory: 9124k freed
[ 0.622089] audit: initializing netlink socket (disabled)
[ 0.622112] type=2000 audit(1360845489.621:1): initialized
[ 0.645132] I-pipe: head domain Xenomai registered.
[ 0.645194] Xenomai: hal/i386 started.
[ 0.645939] Xenomai: scheduling class idle registered.
[ 0.645943] Xenomai: scheduling class rt registered.
[ 0.646109] Xenomai: real-time nucleus v2.6.2.1 (Day At The Beach) loaded.
[ 0.646109] Xenomai: debug mode enabled.
[ 0.646135] Xenomai: starting native API services.
[ 0.646141] Xenomai: starting POSIX services.
[ 0.646197] Xenomai: starting RTDM services.
[ 0.646319] highmem bounce pool size: 64 pages
[ 0.646319] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.649104] VFS: Disk quotas dquot_6.5.2
[ 0.649104] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.649222] msgmni has been set to 1746
[ 0.649354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.649354] io scheduler noop registered
[ 0.649354] io scheduler deadline registered
[ 0.649354] io scheduler cfq registered (default)
[ 0.650193] isapnp: Scanning for PnP cards...
[ 1.005904] isapnp: No Plug & Play device found
[ 1.005935] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.006863] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.007863] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.008862] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.010863] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.011863] 00:11: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.012863] 00:12: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.013863] 00:13: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.013988] Linux agpgart interface v0.103
[ 1.014917] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.015024] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.015179] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.015298] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.015298] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 1.015298] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.016163] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.016228] mousedev: PS/2 mouse device common for all mice
[ 1.016228] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.016228] rtc0: alarms up to one day, 114 bytes nvram
[ 1.016228] drop_monitor: Initializing network drop monitor service
[ 1.016869] TCP: cubic registered
[ 1.017080] NET: Registered protocol family 10
[ 1.017400] mip6: Mobile IPv6
[ 1.017406] NET: Registered protocol family 17
[ 1.017437] Key type dns_resolver registered
[ 1.017492] Using IPI No-Shortcut mode
[ 1.017536] PM: Hibernation image not present or could not be loaded.
[ 1.017536] registered taskstats version 1
[ 1.018020] rtc_cmos 00:03: setting system clock to 2013-02-14 12:38:11 UTC (1360845491)
[ 1.018135] Freeing unused kernel memory: 356k freed
[ 1.018348] Write protecting the kernel text: 2760k
[ 1.018377] Write protecting the kernel read-only data: 884k
[ 1.051595] udev[49]: starting version 164
[ 1.148465] usbcore: registered new interface driver usbfs
[ 1.148509] usbcore: registered new interface driver hub
[ 1.155940] usbcore: registered new device driver usb
[ 1.157199] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.161072] SCSI subsystem initialized
[ 1.163670] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.163738] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 1.163805] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.163845] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.164386] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 1.164394] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 1.172710] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.172769] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000fa00
[ 1.172899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.172909] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172917] usb usb1: Product: UHCI Host Controller
[ 1.172925] usb usb1: Manufacturer: Linux 3.5.7-xenomai4 uhci_hcd
[ 1.172932] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.175013] hub 1-0:1.0: USB hub found
[ 1.175032] hub 1-0:1.0: 2 ports detected
[ 1.177792] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 5
[ 1.177886] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.177897] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.177916] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.177965] uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000f900
[ 1.178063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.178073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.178082] usb usb2: Product: UHCI Host Controller
[ 1.178089] usb usb2: Manufacturer: Linux 3.5.7-xenomai4 uhci_hcd
[ 1.178097] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.178415] hub 2-0:1.0: USB hub found
[ 1.178432] hub 2-0:1.0: 2 ports detected
[ 1.178638] e1000e 0000:00:19.0: found PCI INT A -> IRQ 10
[ 1.178701] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.178871] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.180327] libata version 3.00 loaded.
[ 1.390082] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:01:05:0e:61:9d
[ 1.390092] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.390126] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 1.390135] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 10
[ 1.390135] pcieport 0000:00:1c.0: IRQ routing conflict: have IRQ 9, want IRQ 10
[ 1.390135] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.390135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.390135] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.390135] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000f800
[ 1.390391] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.390391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.390391] usb usb3: Product: UHCI Host Controller
[ 1.390391] usb usb3: Manufacturer: Linux 3.5.7-xenomai4 uhci_hcd
[ 1.390391] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.391003] hub 3-0:1.0: USB hub found
[ 1.391022] hub 3-0:1.0: 2 ports detected
[ 1.391426] ahci 0000:00:1f.2: version 3.0
[ 1.391455] ahci 0000:00:1f.2: found PCI INT B -> IRQ 11
[ 1.391479] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1b.0
[ 1.391510] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1f.3
[ 1.391643] ahci: SSS flag set, parallel bus scan disabled
[ 1.391702] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.391714] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 1.391725] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.399403] scsi0 : ahci
[ 1.399614] scsi1 : ahci
[ 1.399825] scsi2 : ahci
[ 1.399991] scsi3 : ahci
[ 1.400169] scsi4 : ahci
[ 1.400345] scsi5 : ahci
[ 1.400345] ata1: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc100 irq 11
[ 1.400345] ata2: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc180 irq 11
[ 1.400345] ata3: DUMMY
[ 1.400345] ata4: DUMMY
[ 1.400345] ata5: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc300 irq 11
[ 1.400345] ata6: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc380 irq 11
[ 1.527802] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.623778] Switching to clocksource tsc
[ 1.704753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.705062] ata1.00: ATA-8: INTEL SSDSA1NW080G3, 4PC10302, max UDMA/133
[ 1.705069] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.705405] ata1.00: configured for UDMA/133
[ 1.705619] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA1NW08 4PC1 PQ: 0 ANSI: 5
[ 1.744772] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[ 1.744781] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.744787] usb 1-1: Product: USB Receiver
[ 1.744793] usb 1-1: Manufacturer: Logitech
[ 1.852748] usb 1-2: new full-speed USB device number 3 using uhci_hcd
[ 2.010751] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.020760] usb 1-2: New USB device found, idVendor=046d, idProduct=c318
[ 2.020768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.020774] usb 1-2: Product: Logitech Illuminated Keyboard
[ 2.020780] usb 1-2: Manufacturer: Logitech
[ 2.057882] usbcore: registered new interface driver usbhid
[ 2.057891] usbhid: USB HID core driver
[ 2.315752] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.620749] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.636153] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.636428] sd 0:0:0:0: [sda] Write Protect is off
[ 2.636440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.636526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.637873] sda: sda1 sda2 < sda5 >
[ 2.638758] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.756682] EXT3-fs (sda1): recovery required on readonly filesystem
[ 2.756690] EXT3-fs (sda1): write access will be enabled during recovery
[ 2.798921] kjournald starting. Commit interval 5 seconds
[ 2.798975] EXT3-fs (sda1): orphan cleanup on readonly fs
[ 2.798987] ext3_orphan_cleanup: deleting unreferenced inode 1177435
[ 2.799039] ext3_orphan_cleanup: deleting unreferenced inode 1177434
[ 2.799061] ext3_orphan_cleanup: deleting unreferenced inode 1177433
[ 2.799080] ext3_orphan_cleanup: deleting unreferenced inode 1177431
[ 2.799101] ext3_orphan_cleanup: deleting unreferenced inode 1177423
[ 2.799121] ext3_orphan_cleanup: deleting unreferenced inode 1177422
[ 2.799139] ext3_orphan_cleanup: deleting unreferenced inode 1177421
[ 2.799157] ext3_orphan_cleanup: deleting unreferenced inode 1177420
[ 2.799177] ext3_orphan_cleanup: deleting unreferenced inode 1177410
[ 2.799190] ext3_orphan_cleanup: deleting unreferenced inode 1177409
[ 2.799207] EXT3-fs (sda1): 10 orphan inodes deleted
[ 2.801183] EXT3-fs (sda1): recovery complete
[ 2.801189] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 3.056119] udev[243]: starting version 164
[ 3.214080] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.219034] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.225468] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 3.248811] i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 11
[ 3.248837] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:00:1b.0
[ 3.248865] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:00:1f.2
[ 3.284568] microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
[ 3.289850] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
[ 3.297255] hid-generic 0003:046D:C318.0004: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-2/input0
[ 3.301073] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input2
[ 3.304102] RT-Socket-CAN 0.90.2 - (C) 2006 RT-Socket-CAN Development Team
[ 3.306454] hid-generic 0003:046D:C318.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-2/input1
[ 3.310147] RTCAN SJA1000 driver initialized
[ 3.312953] PEAK-PCI-CAN: initializing device 001c:0001
[ 3.313515] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2
[ 3.321701] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/input/input3
[ 3.321994] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1:1
[ 3.326006] parport_pc 00:10: reported by Plug and Play BIOS
[ 3.326072] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 3.332915] PEAK-PCI-CAN: base_addr=f866e000 conf_addr=f862c000 irq=5
[ 3.332934] ------------[ cut here ]------------
[ 3.332950] WARNING: at arch/x86/kernel/ipipe.c:251 ipipe_set_irq_affinity+0x33/0x82()
[ 3.332956] Hardware name: CB4057
[ 3.332961] Modules linked in: parport_pc(+) parport xeno_can_peak_pci(+) xeno_can_sja1000 xeno_can coretemp hid_logitech_dj hid_generic tpm_tis microcode(+) tpm snd i2c_i801 i2c_core lpc_ich pcspkr serio_raw mfd_core shpchp pci_hotplug soundcore snd_page_alloc ext3 jbd mbcache sd_mod crc_t10dif usbhid hid ahci libahci libata e1000e uhci_hcd scsi_mod ehci_hcd usbcore usb_common [last unloaded: scsi_wait_scan]
[ 3.333129] Pid: 330, comm: modprobe Tainted: G I 3.5.7-xenomai4 #1
[ 3.333135] Call Trace:
[ 3.333149] [<c10226a5>] ? warn_slowpath_common+0x6a/0x7b
[ 3.333161] [<c1015bd1>] ? ipipe_set_irq_affinity+0x33/0x82
[ 3.333172] [<c10226c3>] ? warn_slowpath_null+0xd/0x10
[ 3.333184] [<c1015bd1>] ? ipipe_set_irq_affinity+0x33/0x82
[ 3.333196] [<c1099051>] ? xnintr_attach+0x2a/0xf0
[ 3.333208] [<c10c04b0>] ? rtdm_irq_request+0x21/0x43
[ 3.333222] [<f861f77e>] ? rtcan_sja_set_mode+0x1df/0x1df [xeno_can_sja1000]
[ 3.333234] [<f861f4de>] ? rtcan_sja1000_register+0xb1/0x172 [xeno_can_sja1000]
[ 3.333249] [<f862726d>] ? rtcan_peak_pci_add_chan+0x19e/0x1e9 [xeno_can_peak_pci]
[ 3.333268] [<f86273c3>] ? peak_pci_init_one+0xb9/0x106 [xeno_can_peak_pci]
[ 3.333281] [<c1193901>] ? local_pci_probe+0x34/0x74
[ 3.333293] [<c11943d5>] ? pci_device_probe+0x41/0x63
[ 3.333306] [<c11de6ba>] ? driver_probe_device+0x8c/0x166
[ 3.333317] [<c11de7d4>] ? __driver_attach+0x40/0x5b
[ 3.333329] [<c11dd611>] ? bus_for_each_dev+0x37/0x5f
[ 3.333340] [<c11de564>] ? driver_attach+0x11/0x13
[ 3.333351] [<c11de794>] ? driver_probe_device+0x166/0x166
[ 3.333362] [<c11de141>] ? bus_add_driver+0x8a/0x1bd
[ 3.333374] [<c117b602>] ? kset_find_obj+0x20/0x44
[ 3.333386] [<f8629000>] ? 0xf8628fff
[ 3.333396] [<c11dec75>] ? driver_register+0x72/0xd1
[ 3.333408] [<f8629000>] ? 0xf8628fff
[ 3.333419] [<c11945a0>] ? __pci_register_driver+0x31/0x7e
[ 3.333430] [<c1001068>] ? do_one_initcall+0x68/0x126
[ 3.333442] [<c1062731>] ? sys_init_module+0x61/0x188
[ 3.333454] [<c12aff21>] ? sysenter_do_call+0x12/0x16
[ 3.333462] ---[ end trace d218b94cc4f5e07b ]---
[ 3.333610] rtcan: registered rtcan0
[ 3.333655] PEAK-PCI-CAN: base_addr=f8670400 conf_addr=f862c000 irq=5
[ 3.333682] rtcan: registered rtcan1
[ 3.355274] snd_hda_intel 0000:00:1b.0: found PCI INT A -> IRQ 11
[ 3.355321] snd_hda_intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1f.2
[ 3.355334] snd_hda_intel 0000:00:1b.0: sharing IRQ 11 with 0000:00:1f.3
[ 3.477046] microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
[ 3.522436] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.391752] hda_codec: ALC889: SKU not ready 0x90100000
[ 4.395060] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 4.402305] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.402548] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.402800] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.403024] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.403236] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.403448] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.747058] EXT3-fs (sda1): using internal journal
[ 4.792776] loop: module loaded
[ 4.848945] dme1737 dme1737.2160: Found a SCH311x chip at 0x0870
[ 4.848964] dme1737 dme1737.2160: Optional features: pwm3=yes, pwm5=no, pwm6=no, fan3=yes, fan4=no, fan5=no, fan6=no.
[ 5.264350] kjournald starting. Commit interval 5 seconds
[ 5.264513] EXT3-fs (sda5): using internal journal
[ 5.264519] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 5.505987] fuse init (API version 7.19)
[ 6.330852] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.469031] Bluetooth: Core ver 2.16
[ 6.469087] NET: Registered protocol family 31
[ 6.469093] Bluetooth: HCI device and connection manager initialized
[ 6.469591] Bluetooth: HCI socket layer initialized
[ 6.469601] Bluetooth: L2CAP socket layer initialized
[ 6.469622] Bluetooth: SCO socket layer initialized
[ 6.552204] lp0: using parport0 (interrupt-driven).
[ 6.568691] ppdev: user-space parallel port driver
next prev parent reply other threads:[~2013-02-14 12:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-14 12:12 [Xenomai] kernel configuration problems with ACPI hahnchristopher
2013-02-14 12:17 ` Christopher Hahn
2013-02-14 12:20 ` Gilles Chanteperdrix
2013-02-14 12:58 ` Christopher Hahn [this message]
2013-02-14 19:25 ` Gilles Chanteperdrix
2013-02-15 8:34 ` Christopher Hahn
2013-02-15 12:14 ` Gilles Chanteperdrix
2013-02-15 13:38 ` Christopher Hahn
2013-02-19 12:52 ` Christopher Hahn
2013-02-19 17:56 ` Gilles Chanteperdrix
2013-02-26 10:01 ` hahnchristopher
2013-02-26 12:12 ` Gilles Chanteperdrix
2013-02-26 12:18 ` Jan Kiszka
2013-02-26 18:39 ` Gilles Chanteperdrix
2013-02-26 19:56 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=511CDF65.1020907@arcor.de \
--to=hahnchristopher@arcor.de \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.