* coda: support of decoding
@ 2013-02-19 1:47 ` Gaëtan Carlier
0 siblings, 0 replies; 10+ messages in thread
From: Gaëtan Carlier @ 2013-02-19 1:47 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
I see in code source of coda driver that decoding is not supported.
ctx->inst_type = CODA_INST_DECODER;
v4l2_err(v4l2_dev, "decoding not supported.\n");
return -EINVAL;
Is there any technical reason or the code has not been written ?
Thanks a lot,
Best regards,
Ga?tan Carlier.
^ permalink raw reply [flat|nested] 10+ messages in thread
* coda: support of decoding
@ 2013-02-19 1:47 ` Gaëtan Carlier
0 siblings, 0 replies; 10+ messages in thread
From: Gaëtan Carlier @ 2013-02-19 1:47 UTC (permalink / raw)
To: linux-media, linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam, Sascha Hauer, Rob Herring, Grant Likely
Hello,
I see in code source of coda driver that decoding is not supported.
ctx->inst_type = CODA_INST_DECODER;
v4l2_err(v4l2_dev, "decoding not supported.\n");
return -EINVAL;
Is there any technical reason or the code has not been written ?
Thanks a lot,
Best regards,
Gaëtan Carlier.
^ permalink raw reply [flat|nested] 10+ messages in thread
* coda: support of decoding
2013-02-19 1:47 ` Gaëtan Carlier
@ 2013-02-19 18:47 ` Robert Schwebel
-1 siblings, 0 replies; 10+ messages in thread
From: Robert Schwebel @ 2013-02-19 18:47 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 19, 2013 at 02:47:05AM +0100, Ga?tan Carlier wrote:
> I see in code source of coda driver that decoding is not supported.
>
> ctx->inst_type = CODA_INST_DECODER;
> v4l2_err(v4l2_dev, "decoding not supported.\n");
> return -EINVAL;
>
> Is there any technical reason or the code has not been written ?
We have a lot of encoder + decoder patches for Coda in the queue, but
unfortunately not all of that is ready-for-primetime yet.
Which processor are you interested in? MX27 or MX5/MX6?
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: coda: support of decoding
@ 2013-02-19 18:47 ` Robert Schwebel
0 siblings, 0 replies; 10+ messages in thread
From: Robert Schwebel @ 2013-02-19 18:47 UTC (permalink / raw)
To: Gaëtan Carlier
Cc: linux-media, linux-arm-kernel@lists.infradead.org, Grant Likely,
Sascha Hauer, Fabio Estevam, Rob Herring
On Tue, Feb 19, 2013 at 02:47:05AM +0100, Gaëtan Carlier wrote:
> I see in code source of coda driver that decoding is not supported.
>
> ctx->inst_type = CODA_INST_DECODER;
> v4l2_err(v4l2_dev, "decoding not supported.\n");
> return -EINVAL;
>
> Is there any technical reason or the code has not been written ?
We have a lot of encoder + decoder patches for Coda in the queue, but
unfortunately not all of that is ready-for-primetime yet.
Which processor are you interested in? MX27 or MX5/MX6?
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* coda: support of decoding
2013-02-19 18:47 ` Robert Schwebel
@ 2013-02-19 19:57 ` Gaëtan Carlier
-1 siblings, 0 replies; 10+ messages in thread
From: Gaëtan Carlier @ 2013-02-19 19:57 UTC (permalink / raw)
To: linux-arm-kernel
Hi
On 02/19/2013 07:47 PM, Robert Schwebel wrote:
> On Tue, Feb 19, 2013 at 02:47:05AM +0100, Ga?tan Carlier wrote:
>> I see in code source of coda driver that decoding is not supported.
>>
>> ctx->inst_type = CODA_INST_DECODER;
>> v4l2_err(v4l2_dev, "decoding not supported.\n");
>> return -EINVAL;
>>
>> Is there any technical reason or the code has not been written ?
>
> We have a lot of encoder + decoder patches for Coda in the queue, but
> unfortunately not all of that is ready-for-primetime yet.
MX27. I have not yet tested if encoding is working or not.
Where can I find this set of patches ? I will test it with pleasure.
>
> Which processor are you interested in? MX27 or MX5/MX6?
>
> rsc
>
Thank you.
Best regards,
Ga?tan Carlier.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: coda: support of decoding
@ 2013-02-19 19:57 ` Gaëtan Carlier
0 siblings, 0 replies; 10+ messages in thread
From: Gaëtan Carlier @ 2013-02-19 19:57 UTC (permalink / raw)
To: Robert Schwebel
Cc: linux-media, linux-arm-kernel@lists.infradead.org, Grant Likely,
Sascha Hauer, Fabio Estevam, Rob Herring
Hi
On 02/19/2013 07:47 PM, Robert Schwebel wrote:
> On Tue, Feb 19, 2013 at 02:47:05AM +0100, Gaëtan Carlier wrote:
>> I see in code source of coda driver that decoding is not supported.
>>
>> ctx->inst_type = CODA_INST_DECODER;
>> v4l2_err(v4l2_dev, "decoding not supported.\n");
>> return -EINVAL;
>>
>> Is there any technical reason or the code has not been written ?
>
> We have a lot of encoder + decoder patches for Coda in the queue, but
> unfortunately not all of that is ready-for-primetime yet.
MX27. I have not yet tested if encoding is working or not.
Where can I find this set of patches ? I will test it with pleasure.
>
> Which processor are you interested in? MX27 or MX5/MX6?
>
> rsc
>
Thank you.
Best regards,
Gaëtan Carlier.
^ permalink raw reply [flat|nested] 10+ messages in thread
* coda: support of decoding
2013-02-19 19:57 ` Gaëtan Carlier
@ 2013-02-19 21:30 ` Robert Schwebel
-1 siblings, 0 replies; 10+ messages in thread
From: Robert Schwebel @ 2013-02-19 21:30 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 19, 2013 at 08:57:50PM +0100, Ga?tan Carlier wrote:
> > We have a lot of encoder + decoder patches for Coda in the queue,
> > but unfortunately not all of that is ready-for-primetime yet.
>
> MX27. I have not yet tested if encoding is working or not. Where can I
> find this set of patches? I will test it with pleasure.
Most of the work is on MX53 and MX6 recently. We will post the patches
here when something is ready.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: coda: support of decoding
@ 2013-02-19 21:30 ` Robert Schwebel
0 siblings, 0 replies; 10+ messages in thread
From: Robert Schwebel @ 2013-02-19 21:30 UTC (permalink / raw)
To: Gaëtan Carlier
Cc: linux-media, linux-arm-kernel@lists.infradead.org, Grant Likely,
Sascha Hauer, Fabio Estevam, Rob Herring
On Tue, Feb 19, 2013 at 08:57:50PM +0100, Gaëtan Carlier wrote:
> > We have a lot of encoder + decoder patches for Coda in the queue,
> > but unfortunately not all of that is ready-for-primetime yet.
>
> MX27. I have not yet tested if encoding is working or not. Where can I
> find this set of patches? I will test it with pleasure.
Most of the work is on MX53 and MX6 recently. We will post the patches
here when something is ready.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* coda: support of decoding
2013-02-19 21:30 ` Robert Schwebel
@ 2013-02-19 21:35 ` Gaëtan Carlier
-1 siblings, 0 replies; 10+ messages in thread
From: Gaëtan Carlier @ 2013-02-19 21:35 UTC (permalink / raw)
To: linux-arm-kernel
On 02/19/2013 10:30 PM, Robert Schwebel wrote:
> On Tue, Feb 19, 2013 at 08:57:50PM +0100, Ga?tan Carlier wrote:
>>> We have a lot of encoder + decoder patches for Coda in the queue,
>>> but unfortunately not all of that is ready-for-primetime yet.
>>
>> MX27. I have not yet tested if encoding is working or not. Where can I
>> find this set of patches? I will test it with pleasure.
>
> Most of the work is on MX53 and MX6 recently. We will post the patches
> here when something is ready.
OK thanks a lot.
>
> rsc
>
Ga?tan Carlier.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: coda: support of decoding
@ 2013-02-19 21:35 ` Gaëtan Carlier
0 siblings, 0 replies; 10+ messages in thread
From: Gaëtan Carlier @ 2013-02-19 21:35 UTC (permalink / raw)
To: Robert Schwebel
Cc: linux-media, linux-arm-kernel@lists.infradead.org, Grant Likely,
Sascha Hauer, Fabio Estevam, Rob Herring
On 02/19/2013 10:30 PM, Robert Schwebel wrote:
> On Tue, Feb 19, 2013 at 08:57:50PM +0100, Gaëtan Carlier wrote:
>>> We have a lot of encoder + decoder patches for Coda in the queue,
>>> but unfortunately not all of that is ready-for-primetime yet.
>>
>> MX27. I have not yet tested if encoding is working or not. Where can I
>> find this set of patches? I will test it with pleasure.
>
> Most of the work is on MX53 and MX6 recently. We will post the patches
> here when something is ready.
OK thanks a lot.
>
> rsc
>
Gaëtan Carlier.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-02-19 21:36 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-19 1:47 coda: support of decoding Gaëtan Carlier
2013-02-19 1:47 ` Gaëtan Carlier
2013-02-19 18:47 ` Robert Schwebel
2013-02-19 18:47 ` Robert Schwebel
2013-02-19 19:57 ` Gaëtan Carlier
2013-02-19 19:57 ` Gaëtan Carlier
2013-02-19 21:30 ` Robert Schwebel
2013-02-19 21:30 ` Robert Schwebel
2013-02-19 21:35 ` Gaëtan Carlier
2013-02-19 21:35 ` Gaëtan Carlier
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.