From: Lonsn <lonsn2005@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: SMDKV210 support issue in kernel 3.8 (dma-pl330 and HDMI failed)
Date: Tue, 26 Feb 2013 20:59:42 +0800 [thread overview]
Message-ID: <512CB1BE.1070401@gmail.com> (raw)
In-Reply-To: <51275DF7.4010600@gmail.com>
Now I checked HDMI failed at:
drivers/media/platform/s5p-tv/hdmi_drv.c: 912 line
adapter = i2c_get_adapter(pdata->hdmiphy_bus);
if (adapter == NULL) {
dev_err(dev, "hdmiphy adapter request failed\n");
ret = -ENXIO;
goto fail_vdev;
}
Since pdata->hdmiphy_bus is 3, why i2c_get_adapter failed?
Thanks.
> Hi,
> I have tested the kernel 3.8 with a SMDKV210 like board. But I failed
> with dma-pl330 and HDMI driver.
> For dma-pl330, kernel print:
> dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.0 failed with error -22
> dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.1 failed with error -22
>
> For HDMI driver,
> I have added the following HDMI related code to
> arch/arm/mach-s5pv210/mach-smdkv210.c:
> /* I2C module and id for HDMIPHY */
> static struct i2c_board_info hdmiphy_info = {
> I2C_BOARD_INFO("hdmiphy-s5pv210", 0x38),
> };
>
> i2c_register_board_info(2, smdkv210_i2c_devs2,
> ARRAY_SIZE(smdkv210_i2c_devs2));
>
> s5p_i2c_hdmiphy_set_platdata(NULL);
> s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
>
> s3c_ide_set_platdata(&smdkv210_ide_pdata);
>
> then kernel print:
> s5p-hdmi s5pv210-hdmi: hdmiphy adapter request failed
> s5p-hdmi s5pv210-hdmi: probe failed
> Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
>
> s5p-mixer s5p-mixer: probe start
> s5p-mixer s5p-mixer: resources acquired
> s5p-mixer s5p-mixer: module s5p-hdmi provides no subdev!
> s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
> s5p-mixer s5p-mixer: failed to register any output
> s5p-mixer s5p-mixer: probe failed
>
> Can anybody help me on how to config the HDMI output function in linux
> kernel 3.8? I mainly want to do video hardware decode using s5pv210 MFC
> and then display with HDMI.
>
> Thanks!
>
> The followings are full kernel boot info:
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
> Booting Linux on physical CPU 0x0
> Linux version 3.8.0-dirty (lonsn@lonsn-laptop) (gcc version 4.4.1
> (Sourcery G++ Lite 2009q3-67) ) #14 PREEMPT Thu Feb 21 21:21:41 CST 2013
> CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: SMDKV210
> Memory policy: ECC disabled, Data cache writeback
> CPU S5PV210/S5PC110 (id 0x43110220)
> S3C24XX Clocks, Copyright 2004 Simtec Electronics
> S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
> S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
> HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
> sclk_dmc: source is sclk_a2m (0), rate is 200000000
> sclk_onenand: source is hclk_dsys (1), rate is 166750000
> sclk_fimc: source is ext_xtal (0), rate is 24000000
> sclk_fimc: source is ext_xtal (0), rate is 24000000
> sclk_fimc: source is ext_xtal (0), rate is 24000000
> sclk_cam0: source is ext_xtal (0), rate is 24000000
> sclk_cam1: source is ext_xtal (0), rate is 24000000
> sclk_fimd: source is ext_xtal (0), rate is 24000000
> sclk_mfc: source is sclk_a2m (0), rate is 200000000
> sclk_g2d: source is sclk_a2m (0), rate is 200000000
> sclk_g3d: source is sclk_a2m (0), rate is 200000000
> sclk_csis: source is ext_xtal (0), rate is 24000000
> sclk_pwi: source is ext_xtal (0), rate is 24000000
> sclk_pwm: source is ext_xtal (0), rate is 24000000
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128016
> Kernel command line: console=ttySAC2,115200 init=/linuxrc root=/dev/nfs
> ip=192.168.2.20:192.168.2.200:192.168.2.1:255.255.255.0:L210::off
> nfsroot=192.168.2.200:/home/lonsn/work/s5pv210/nfs,v3 rw rootwait
> enable_wait_mode=off
> PID hash table entries: 2048 (order: 1, 8192 bytes)
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> __ex_table already sorted, skipping sort
> Memory: 256MB 48MB 200MB = 504MB total
> Memory: 506400k/514592k available, 9696k reserved, 0K highmem
> Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> vmalloc : 0xb0800000 - 0xff000000 (1256 MB)
> lowmem : 0x80000000 - 0xb0000000 ( 768 MB)
> modules : 0x7f000000 - 0x80000000 ( 16 MB)
> .text : 0x80008000 - 0x80466414 (4474 kB)
> .init : 0x80467000 - 0x80487884 ( 131 kB)
> .data : 0x80488000 - 0x804c3760 ( 238 kB)
> .bss : 0x804c3760 - 0x804faa48 ( 221 kB)
> SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> NR_IRQS:208
> VIC @f6000000: id 0x00041192, vendor 0x41
> VIC @f6010000: id 0x00041192, vendor 0x41
> VIC @f6020000: id 0x00041192, vendor 0x41
> VIC @f6030000: id 0x00041192, vendor 0x41
> sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784ms
> Console: colour dummy device 80x30
> Calibrating delay loop... 663.55 BogoMIPS (lpj=1658880)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Testing write buffer coherency: ok
> Setting up static identity map for 0x2034e1a8 - 0x2034e200
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> S3C Power Management, Copyright 2004 Simtec Electronics
> S5PV210: Initializing architecture
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> s3c-i2c s3c2440-i2c.0: slave address 0x10
> s3c-i2c s3c2440-i2c.0: bus frequency set to 65 KHz
> s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
> s3c-i2c s3c2440-i2c.1: slave address 0x10
> s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
> s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
> s3c-i2c s3c2440-i2c.2: slave address 0x10
> s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
> s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
> Linux video capture interface: v2.00
> Advanced Linux Sound Architecture Driver Initialized.
> Switching to clocksource s5p_clocksource_timer
> NET: Registered protocol family 2
> TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP: reno registered
> UDP hash table entries: 256 (order: 1, 12288 bytes)
> UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> NFS: Registering the id_resolver key type
> Key type id_resolver registered
> Key type id_legacy registered
> ROMFS MTD (C) 2007 Red Hat, Inc.
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> s3c-fb s5pv210-fb: window 0: fb
> dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.0 failed with error -22
> dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.1 failed with error -22
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 74) is a S3C6400/10
> s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 75) is a S3C6400/10
> s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 76) is a S3C6400/10
> console [ttySAC2] enabled
> s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 77) is a S3C6400/10
> brd: module loaded
> loop: module loaded
> dm9000 Ethernet Driver, V1.31
> eth0: dm9000a at b09da300,b09dc30c IRQ 41 MAC: 00:09:c0:ff:ec:48
> (platform data)
> mousedev: PS/2 mouse device common for all mice
> i2c /dev entries driver
> m2m-testdev m2m-testdev.0: mem2mem-testdevDevice registered as /dev/video0
> s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video1
> s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video2
> s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
> s5p-mfc s5p-mfc: decoder registered as /dev/video3
> s5p-mfc s5p-mfc: encoder registered as /dev/video4
> s5p-hdmi s5pv210-hdmi: hdmiphy adapter request failed
> s5p-hdmi s5pv210-hdmi: probe failed
> Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
>
> s5p-mixer s5p-mixer: probe start
> s5p-mixer s5p-mixer: resources acquired
> s5p-mixer s5p-mixer: module s5p-hdmi provides no subdev!
> s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
> s5p-mixer s5p-mixer: failed to register any output
> s5p-mixer s5p-mixer: probe failed
> samsung-ac97 samsung-ac97: ac97 failed to get ac97_clock
> soc-audio soc-audio: ASoC: machine SMDK WM9713 should use
> snd_soc_register_card()
> soc-audio soc-audio: ASoC: CPU DAI samsung-ac97 not registered
> platform soc-audio: Driver soc-audio requests probe deferral
> TCP: cubic registered
> NET: Registered protocol family 17
> Key type dns_resolver registered
> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
> soc-audio: probe of soc-audio failed with error -22
> dm9000 dm9000 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
> IP-Config: Complete:
> device=eth0, hwaddr=00:09:c0:ff:ec:48, ipaddr=192.168.2.20,
> mask=255.255.255.0, gw=192.168.2.1
> host=L210, domain=, nis-domain=(none)
> bootserver=192.168.2.200, rootserver=192.168.2.200, rootpath=
> ALSA device list:
> No soundcards found.
> VFS: Mounted root (nfs filesystem) on device 0:9.
> Freeing init memory: 128K
> Failed to execute /linuxrc. Attempting defaults...
> init: ureadahead main process (1031) terminated with status 5
>
> Last login: Thu Jan 1 00:00:16 UTC 1970 on tty1
> root@linaro-developer:~#
>
WARNING: multiple messages have this Message-ID (diff)
From: Lonsn <lonsn2005@gmail.com>
To: unlisted-recipients:; (no To-header on input)@casper.infradead.org
Cc: linux-samsung-soc@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: SMDKV210 support issue in kernel 3.8 (dma-pl330 and HDMI failed)
Date: Tue, 26 Feb 2013 20:59:42 +0800 [thread overview]
Message-ID: <512CB1BE.1070401@gmail.com> (raw)
In-Reply-To: <51275DF7.4010600@gmail.com>
Now I checked HDMI failed at:
drivers/media/platform/s5p-tv/hdmi_drv.c: 912 line
adapter = i2c_get_adapter(pdata->hdmiphy_bus);
if (adapter == NULL) {
dev_err(dev, "hdmiphy adapter request failed\n");
ret = -ENXIO;
goto fail_vdev;
}
Since pdata->hdmiphy_bus is 3, why i2c_get_adapter failed?
Thanks.
> Hi,
> I have tested the kernel 3.8 with a SMDKV210 like board. But I failed
> with dma-pl330 and HDMI driver.
> For dma-pl330, kernel print:
> dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.0 failed with error -22
> dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.1 failed with error -22
>
> For HDMI driver,
> I have added the following HDMI related code to
> arch/arm/mach-s5pv210/mach-smdkv210.c:
> /* I2C module and id for HDMIPHY */
> static struct i2c_board_info hdmiphy_info = {
> I2C_BOARD_INFO("hdmiphy-s5pv210", 0x38),
> };
>
> i2c_register_board_info(2, smdkv210_i2c_devs2,
> ARRAY_SIZE(smdkv210_i2c_devs2));
>
> s5p_i2c_hdmiphy_set_platdata(NULL);
> s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
>
> s3c_ide_set_platdata(&smdkv210_ide_pdata);
>
> then kernel print:
> s5p-hdmi s5pv210-hdmi: hdmiphy adapter request failed
> s5p-hdmi s5pv210-hdmi: probe failed
> Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
>
> s5p-mixer s5p-mixer: probe start
> s5p-mixer s5p-mixer: resources acquired
> s5p-mixer s5p-mixer: module s5p-hdmi provides no subdev!
> s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
> s5p-mixer s5p-mixer: failed to register any output
> s5p-mixer s5p-mixer: probe failed
>
> Can anybody help me on how to config the HDMI output function in linux
> kernel 3.8? I mainly want to do video hardware decode using s5pv210 MFC
> and then display with HDMI.
>
> Thanks!
>
> The followings are full kernel boot info:
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
> Booting Linux on physical CPU 0x0
> Linux version 3.8.0-dirty (lonsn@lonsn-laptop) (gcc version 4.4.1
> (Sourcery G++ Lite 2009q3-67) ) #14 PREEMPT Thu Feb 21 21:21:41 CST 2013
> CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: SMDKV210
> Memory policy: ECC disabled, Data cache writeback
> CPU S5PV210/S5PC110 (id 0x43110220)
> S3C24XX Clocks, Copyright 2004 Simtec Electronics
> S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
> S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
> HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
> sclk_dmc: source is sclk_a2m (0), rate is 200000000
> sclk_onenand: source is hclk_dsys (1), rate is 166750000
> sclk_fimc: source is ext_xtal (0), rate is 24000000
> sclk_fimc: source is ext_xtal (0), rate is 24000000
> sclk_fimc: source is ext_xtal (0), rate is 24000000
> sclk_cam0: source is ext_xtal (0), rate is 24000000
> sclk_cam1: source is ext_xtal (0), rate is 24000000
> sclk_fimd: source is ext_xtal (0), rate is 24000000
> sclk_mfc: source is sclk_a2m (0), rate is 200000000
> sclk_g2d: source is sclk_a2m (0), rate is 200000000
> sclk_g3d: source is sclk_a2m (0), rate is 200000000
> sclk_csis: source is ext_xtal (0), rate is 24000000
> sclk_pwi: source is ext_xtal (0), rate is 24000000
> sclk_pwm: source is ext_xtal (0), rate is 24000000
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128016
> Kernel command line: console=ttySAC2,115200 init=/linuxrc root=/dev/nfs
> ip=192.168.2.20:192.168.2.200:192.168.2.1:255.255.255.0:L210::off
> nfsroot=192.168.2.200:/home/lonsn/work/s5pv210/nfs,v3 rw rootwait
> enable_wait_mode=off
> PID hash table entries: 2048 (order: 1, 8192 bytes)
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> __ex_table already sorted, skipping sort
> Memory: 256MB 48MB 200MB = 504MB total
> Memory: 506400k/514592k available, 9696k reserved, 0K highmem
> Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> vmalloc : 0xb0800000 - 0xff000000 (1256 MB)
> lowmem : 0x80000000 - 0xb0000000 ( 768 MB)
> modules : 0x7f000000 - 0x80000000 ( 16 MB)
> .text : 0x80008000 - 0x80466414 (4474 kB)
> .init : 0x80467000 - 0x80487884 ( 131 kB)
> .data : 0x80488000 - 0x804c3760 ( 238 kB)
> .bss : 0x804c3760 - 0x804faa48 ( 221 kB)
> SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> NR_IRQS:208
> VIC @f6000000: id 0x00041192, vendor 0x41
> VIC @f6010000: id 0x00041192, vendor 0x41
> VIC @f6020000: id 0x00041192, vendor 0x41
> VIC @f6030000: id 0x00041192, vendor 0x41
> sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784ms
> Console: colour dummy device 80x30
> Calibrating delay loop... 663.55 BogoMIPS (lpj=1658880)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Testing write buffer coherency: ok
> Setting up static identity map for 0x2034e1a8 - 0x2034e200
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> S3C Power Management, Copyright 2004 Simtec Electronics
> S5PV210: Initializing architecture
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> s3c-i2c s3c2440-i2c.0: slave address 0x10
> s3c-i2c s3c2440-i2c.0: bus frequency set to 65 KHz
> s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
> s3c-i2c s3c2440-i2c.1: slave address 0x10
> s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
> s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
> s3c-i2c s3c2440-i2c.2: slave address 0x10
> s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
> s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
> Linux video capture interface: v2.00
> Advanced Linux Sound Architecture Driver Initialized.
> Switching to clocksource s5p_clocksource_timer
> NET: Registered protocol family 2
> TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP: reno registered
> UDP hash table entries: 256 (order: 1, 12288 bytes)
> UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> NFS: Registering the id_resolver key type
> Key type id_resolver registered
> Key type id_legacy registered
> ROMFS MTD (C) 2007 Red Hat, Inc.
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> s3c-fb s5pv210-fb: window 0: fb
> dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.0 failed with error -22
> dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.1 failed with error -22
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 74) is a S3C6400/10
> s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 75) is a S3C6400/10
> s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 76) is a S3C6400/10
> console [ttySAC2] enabled
> s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 77) is a S3C6400/10
> brd: module loaded
> loop: module loaded
> dm9000 Ethernet Driver, V1.31
> eth0: dm9000a at b09da300,b09dc30c IRQ 41 MAC: 00:09:c0:ff:ec:48
> (platform data)
> mousedev: PS/2 mouse device common for all mice
> i2c /dev entries driver
> m2m-testdev m2m-testdev.0: mem2mem-testdevDevice registered as /dev/video0
> s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video1
> s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video2
> s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
> s5p-mfc s5p-mfc: decoder registered as /dev/video3
> s5p-mfc s5p-mfc: encoder registered as /dev/video4
> s5p-hdmi s5pv210-hdmi: hdmiphy adapter request failed
> s5p-hdmi s5pv210-hdmi: probe failed
> Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
>
> s5p-mixer s5p-mixer: probe start
> s5p-mixer s5p-mixer: resources acquired
> s5p-mixer s5p-mixer: module s5p-hdmi provides no subdev!
> s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
> s5p-mixer s5p-mixer: failed to register any output
> s5p-mixer s5p-mixer: probe failed
> samsung-ac97 samsung-ac97: ac97 failed to get ac97_clock
> soc-audio soc-audio: ASoC: machine SMDK WM9713 should use
> snd_soc_register_card()
> soc-audio soc-audio: ASoC: CPU DAI samsung-ac97 not registered
> platform soc-audio: Driver soc-audio requests probe deferral
> TCP: cubic registered
> NET: Registered protocol family 17
> Key type dns_resolver registered
> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
> soc-audio: probe of soc-audio failed with error -22
> dm9000 dm9000 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
> IP-Config: Complete:
> device=eth0, hwaddr=00:09:c0:ff:ec:48, ipaddr=192.168.2.20,
> mask=255.255.255.0, gw=192.168.2.1
> host=L210, domain=, nis-domain=(none)
> bootserver=192.168.2.200, rootserver=192.168.2.200, rootpath=
> ALSA device list:
> No soundcards found.
> VFS: Mounted root (nfs filesystem) on device 0:9.
> Freeing init memory: 128K
> Failed to execute /linuxrc. Attempting defaults...
> init: ureadahead main process (1031) terminated with status 5
>
> Last login: Thu Jan 1 00:00:16 UTC 1970 on tty1
> root@linaro-developer:~#
>
next prev parent reply other threads:[~2013-02-26 12:59 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-22 12:00 SMDKV210 support issue in kernel 3.8 (dma-pl330 and HDMI failed) Lonsn
2013-02-26 12:59 ` Lonsn [this message]
2013-02-26 12:59 ` Lonsn
2013-02-26 20:07 ` Sylwester Nawrocki
2013-02-26 20:32 ` Sylwester Nawrocki
2013-02-27 15:13 ` Lonsn
2013-02-27 15:48 ` Lonsn
2013-02-27 15:48 ` Lonsn
2013-02-27 21:41 ` Sylwester Nawrocki
2013-02-28 12:28 ` Lonsn
2013-02-28 15:09 ` Lonsn
2013-02-28 15:09 ` Lonsn
2013-02-28 15:54 ` Sylwester Nawrocki
2013-02-26 21:22 ` Sylwester Nawrocki
2013-02-26 21:22 ` Sylwester Nawrocki
2013-02-27 10:51 ` Inderpal Singh
2013-02-27 10:51 ` Inderpal Singh
2013-02-27 11:22 ` Sylwester Nawrocki
2013-02-27 11:22 ` Sylwester Nawrocki
2013-02-27 15:32 ` Inderpal Singh
2013-02-27 15:32 ` Inderpal Singh
2013-02-27 15:22 ` Lonsn
2013-02-27 15:22 ` Lonsn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=512CB1BE.1070401@gmail.com \
--to=lonsn2005@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.