i.MX6Quad PMU irq handling (was: Re: [PATCH 0/9] ARM perf updates for 3.7)

[dirk.behme@de.bosch.com (Dirk Behme)]

Hi Hui,

On 14.08.2012 03:46, Hui Wang wrote:
> Will Deacon wrote:
>> On Mon, Aug 13, 2012 at 10:11:37AM +0100, Hui Wang wrote:
>>   
>>> Hi Will Deacon,
>>>     
>> Hello,
>>
>>   
>>> For SMP platforms, each CPU core has an independent PMU, and each PMU 
>>> has a dedicated irq (SPI or PPI). Current perf subsystem framework only 
>>> supports each PMU to have a dedicated SPI irq, and it will support each 
>>> PMU to have a PPI irq (i have seen someone has sent out the patches), 
>>> but there is a situation the subsystem doesn't support yet, the 
>>> situation is multi PMUs share one same SPI irq, e.g. the i.MX6Quad CPU 
>>> has 4 cortex-a9 cores, each core has a PMU, all PMU irqs are routed 
>>> (ORed) to one SPI irq, do you know how to support this situation?
>>>     
>> That's what I like to call a braindead, broken system. Seriously, CPU PMU
>> interrupts *can only* be handled on the CPU which raised them -- ORing these
>> things together means ping-ponging the interrupt affinity around until we
>> find the right guy. There's also the fun case where multiple PMUs assert
>> simultaneously and I've even heard about platforms where they OR in the
>> bloody L2 PMU interrupt as well for good measure!
>>
>> If you have to support such a device, take a look at the ux500 code
>> (db8500_pmu_handler), but please take all of your profiling numbers with a
>> pinch of salt. For a quad-core processor, the numbers will probably be even
>> less accurate.
>>
>> Also, please go ahead and inflict sufficient injuries to your hardware guys
>> that they stop this madness!
>>   
> Got it, thanks for the information, it is very useful.

Above you mention the the i.MX6Quad CPU.

Have you done any work/patches for the i.MX6Quad PMU to work with the 
ORed PMU irq?

Have you talked with the Freescale hardware guys "that they stop this 
madness"?

We are facing some issues using perf top on the i.MX6Quad:

http://www.spinics.net/lists/arm-kernel/msg227042.html

Many thanks and best regards

dirk