i.MX6Quad PMU irq handling

[jason77.wang@gmail.com (Hui Wang)]

Dirk Behme wrote:
> Hi Hui,
>
> On 14.08.2012 03:46, Hui Wang wrote:
>> Will Deacon wrote:
>>> On Mon, Aug 13, 2012 at 10:11:37AM +0100, Hui Wang wrote:
>>>  
>>>> Hi Will Deacon,
>>>>     
>>> Hello,
>>>
>>>  
>>>> For SMP platforms, each CPU core has an independent PMU, and each 
>>>> PMU has a dedicated irq (SPI or PPI). Current perf subsystem 
>>>> framework only supports each PMU to have a dedicated SPI irq, and 
>>>> it will support each PMU to have a PPI irq (i have seen someone has 
>>>> sent out the patches), but there is a situation the subsystem 
>>>> doesn't support yet, the situation is multi PMUs share one same SPI 
>>>> irq, e.g. the i.MX6Quad CPU has 4 cortex-a9 cores, each core has a 
>>>> PMU, all PMU irqs are routed (ORed) to one SPI irq, do you know how 
>>>> to support this situation?
>>>>     
>>> That's what I like to call a braindead, broken system. Seriously, 
>>> CPU PMU
>>> interrupts *can only* be handled on the CPU which raised them -- 
>>> ORing these
>>> things together means ping-ponging the interrupt affinity around 
>>> until we
>>> find the right guy. There's also the fun case where multiple PMUs 
>>> assert
>>> simultaneously and I've even heard about platforms where they OR in the
>>> bloody L2 PMU interrupt as well for good measure!
>>>
>>> If you have to support such a device, take a look at the ux500 code
>>> (db8500_pmu_handler), but please take all of your profiling numbers 
>>> with a
>>> pinch of salt. For a quad-core processor, the numbers will probably 
>>> be even
>>> less accurate.
>>>
>>> Also, please go ahead and inflict sufficient injuries to your 
>>> hardware guys
>>> that they stop this madness!
>>>   
>> Got it, thanks for the information, it is very useful.
>
> Above you mention the the i.MX6Quad CPU.
>
> Have you done any work/patches for the i.MX6Quad PMU to work with the 
> ORed PMU irq?
Not yet. i implement a pmu_handler similar to db8500_pmu_handler, but it 
can't work stable on the imx6q. With the increasing number of cpu cores, 
the situation is worse.

>
> Have you talked with the Freescale hardware guys "that they stop this 
> madness"?
As Shawn said, this issue has been reported to FSL.


Regards,
Hui.
>
> We are facing some issues using perf top on the i.MX6Quad:
>
> http://www.spinics.net/lists/arm-kernel/msg227042.html
>
> Many thanks and best regards
>
> dirk
>