From: "Ivan Kuten" <ivan.kuten@promwad.com>
To: linux-mtd@lists.infradead.org
Subject: PATCH: at91_nand rdy_pin fix
Date: Thu, 24 May 2007 00:53:14 +0300 (EEST) [thread overview]
Message-ID: <51303.127.0.0.1.1179957194.squirrel@localhost> (raw)
Hello,
The patch below fixes nand driver for AT91 boards which do not have NAND R/B signal
connected to gpio (rdy_pin is not connected).
Patch is against 2.6.22-rc1 + corresponding at91 patch from maxim.org.za
Best regards, Ivan
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com>
---
diff -urN linux.orig/drivers/mtd/nand/at91_nand.c linux/drivers/mtd/nand/at91_nand.c
--- linux.orig/drivers/mtd/nand/at91_nand.c 2007-05-24 00:19:57 +0300
+++ linux/drivers/mtd/nand/at91_nand.c 2007-05-24 00:10:01 +0300
@@ -128,7 +128,12 @@
nand_chip->IO_ADDR_R = host->io_base;
nand_chip->IO_ADDR_W = host->io_base;
nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
- nand_chip->dev_ready = at91_nand_device_ready;
+
+ if (host->board->rdy_pin)
+ nand_chip->dev_ready = at91_nand_device_ready;
+ else
+ nand_chip->dev_ready = NULL;
+
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
nand_chip->chip_delay = 20; /* 20us command delay time */
next reply other threads:[~2007-05-23 21:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-23 21:53 Ivan Kuten [this message]
2007-05-24 7:47 ` PATCH: at91_nand rdy_pin fix Andrew Victor
2007-05-24 8:14 ` Ivan Kuten
2007-05-24 11:35 ` Ivan Kuten
-- strict thread matches above, loose matches on Subject: below --
2007-06-28 19:14 Ivan Kuten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51303.127.0.0.1.1179957194.squirrel@localhost \
--to=ivan.kuten@promwad.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.