From: Eric Sandeen <sandeen@sandeen.net>
To: Ole Tange <tange@binf.ku.dk>
Cc: xfs@oss.sgi.com
Subject: Re: xfs_repair segfaults
Date: Fri, 01 Mar 2013 16:14:23 -0600 [thread overview]
Message-ID: <5131283F.8030704@sandeen.net> (raw)
In-Reply-To: <CANU9nTnvJS50vdQv2K0gKHZPvzzH5EY1qpizJNsqUobrr2juDA@mail.gmail.com>
On 2/28/13 9:22 AM, Ole Tange wrote:
> I forced a RAID online. I have done that before and xfs_repair
> normally removes the last hour of data or so, but saves everything
> else.
>
> Today that did not work:
>
> /usr/local/src/xfsprogs-3.1.10/repair# ./xfs_repair -n /dev/md5p1
> Phase 1 - find and verify superblock...
> Phase 2 - using internal log
> - scan filesystem freespace and inode maps...
> flfirst 232 in agf 91 too large (max = 128)
> Segmentation fault (core dumped)
FWIW, the fs in question seems to need a log replay, so
xfs_repair -n would find it in a worse state...
I had forgotten that xfs_repair -n won't complain about
a dirty log. Seems like it should.
But, the log is corrupt enough that it won't replay:
XFS (loop0): Mounting Filesystem
XFS (loop0): Starting recovery (logdev: internal)
ffff88036e7cd800: 58 41 47 46 00 00 00 01 00 00 00 5b 0f ff ff 00 XAGF.......[....
XFS (loop0): Internal error xfs_alloc_read_agf at line 2146 of file fs/xfs/xfs_alloc.c. Caller 0xffffffffa033d009
so really this'll require xfs_repair -L
xfs_repair -L doesn't segfault though, FWIW.
I'll try to look into the -n segfault in any case.
-Eric
> Core put in: http://dna.ku.dk/~tange/tmp/xfs_repair.core.bz2
>
> I tried using the git-version, too, but could not get that to compile.
>
> # uname -a
> Linux franklin 3.2.0-0.bpo.4-amd64 #1 SMP Debian 3.2.35-2~bpo60+1
> x86_64 GNU/Linux
>
> # ./xfs_repair -V
> xfs_repair version 3.1.10
>
> # cat /proc/cpuinfo |grep MH | wc
> 64 256 1280
>
> # cat /proc/partitions |grep md5
> 9 5 125024550912 md5
> 259 0 107521114112 md5p1
> 259 1 17503434752 md5p2
>
> # cat /proc/mdstat
> Personalities : [raid0] [raid6] [raid5] [raid4]
> md5 : active raid0 md1[0] md4[3] md3[2] md2[1]
> 125024550912 blocks super 1.2 512k chunks
>
> md1 : active raid6 sdd[1] sdi[9] sdq[13] sdau[7] sdt[10] sdg[5] sdf[4] sde[2]
> 31256138752 blocks super 1.2 level 6, 128k chunk, algorithm 2
> [10/8] [_UU_UUUUUU]
> bitmap: 2/2 pages [8KB], 1048576KB chunk
>
> md4 : active raid6 sdo[13] sdu[9] sdad[8] sdh[7] sdc[6] sds[11]
> sdap[3] sdao[2] sdk[1]
> 31256138752 blocks super 1.2 level 6, 128k chunk, algorithm 2
> [10/8] [_UUUU_UUUU]
> [>....................] recovery = 2.1% (84781876/3907017344)
> finish=2196.4min speed=29003K/sec
> bitmap: 2/2 pages [8KB], 1048576KB chunk
>
> md2 : active raid6 sdac[0] sdal[9] sdak[8] sdaj[7] sdai[6] sdah[5]
> sdag[4] sdaf[3] sdae[2] sdr[10]
> 31256138752 blocks super 1.2 level 6, 128k chunk, algorithm 2
> [10/10] [UUUUUUUUUU]
> bitmap: 0/2 pages [0KB], 1048576KB chunk
>
> md3 : active raid6 sdaq[0] sdab[9] sdaa[8] sdb[7] sdy[6] sdx[5] sdw[4]
> sdv[3] sdz[10] sdj[1]
> 31256138752 blocks super 1.2 level 6, 128k chunk, algorithm 2
> [10/10] [UUUUUUUUUU]
> bitmap: 0/2 pages [0KB], 1048576KB chunk
>
> unused devices: <none>
>
> # smartctl -a /dev/sdau|grep Model
> Device Model: Hitachi HDS724040ALE640
>
> # hdparm -W /dev/sdau
> /dev/sdau:
> write-caching = 0 (off)
>
> # dmesg
> [ 3745.914280] xfs_repair[25300]: segfault at 7f5d9282b000 ip
> 000000000042d068 sp 00007f5da3183dd0 error 4 in
> xfs_repair[400000+7f000]
>
>
> /Ole
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
>
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-03-01 22:14 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-28 15:22 xfs_repair segfaults Ole Tange
2013-02-28 18:48 ` Eric Sandeen
2013-03-01 9:37 ` Ole Tange
2013-03-01 16:46 ` Eric Sandeen
2013-03-04 9:00 ` Ole Tange
2013-03-04 15:20 ` Eric Sandeen
2013-03-08 10:21 ` Ole Tange
2013-03-08 20:32 ` Eric Sandeen
2013-03-12 10:41 ` Ole Tange
2013-03-12 14:40 ` Eric Sandeen
2013-03-12 11:37 ` Ole Tange
2013-03-12 14:47 ` Eric Sandeen
2013-03-01 11:17 ` Dave Chinner
2013-03-01 12:24 ` Ole Tange
2013-03-01 20:53 ` Dave Chinner
2013-03-04 9:03 ` Ole Tange
2013-03-04 23:23 ` Dave Chinner
2013-03-08 10:09 ` Ole Tange
2013-03-01 22:14 ` Eric Sandeen [this message]
2013-03-01 22:31 ` Dave Chinner
2013-03-01 22:32 ` Eric Sandeen
2013-03-01 23:55 ` Eric Sandeen
2013-03-04 12:47 ` Ole Tange
2013-03-04 15:17 ` Eric Sandeen
2013-03-04 23:11 ` Dave Chinner
-- strict thread matches above, loose matches on Subject: below --
2013-05-06 12:06 Xfs_repair segfaults Filippo Stenico
2013-05-06 14:34 ` Eric Sandeen
2013-05-06 15:00 ` Filippo Stenico
[not found] ` <CADNx=Kv0bt3fNGW8Y24GziW9MOO-+b7fBGub4AYP70b5gAegxw@mail.gmail.com>
2013-05-07 13:20 ` Eric Sandeen
2013-05-07 13:36 ` Filippo Stenico
2013-05-07 18:20 ` Filippo Stenico
2013-05-08 17:30 ` Filippo Stenico
2013-05-08 17:42 ` Filippo Stenico
2013-05-08 23:39 ` Dave Chinner
2013-05-09 15:11 ` Filippo Stenico
2013-05-09 17:22 ` Filippo Stenico
2013-05-09 22:39 ` Dave Chinner
[not found] ` <CADNx=KuQjMNHUk6t0+hBZ5DN6s=RXqrPEjeoSxpBta47CJoDgQ@mail.gmail.com>
2013-05-10 11:00 ` Filippo Stenico
2013-05-09 22:37 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5131283F.8030704@sandeen.net \
--to=sandeen@sandeen.net \
--cc=tange@binf.ku.dk \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.