* Adding gpsd and ntp causes Sabre SD boot not finished.
@ 2013-03-15 14:13 Juha Vuorivirta
2013-03-15 15:04 ` Daiane Angolini
0 siblings, 1 reply; 2+ messages in thread
From: Juha Vuorivirta @ 2013-03-15 14:13 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 546 bytes --]
Hello!
I added support for gpsd and ntp like this:
IMAGE_INSTALL += "gpsd ntp" to local.conf
and
sources/meta-openembedded/meta-oe and
sources/meta-openembedded/meta-networking to bblayers.conf
Then I bitbake core-image-sato. Is this enough?
I assume because I am not making changes to kernel or u-boot?
Booting board stops here:
sh: cannot set terminal process group (-1): Inappropriate ioctl for device
sh: no job control in this shell
sh-4.2#
Without changes boot goes fine and I can login as root.
br,
jv
[-- Attachment #2: Type: text/html, Size: 813 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Adding gpsd and ntp causes Sabre SD boot not finished.
2013-03-15 14:13 Adding gpsd and ntp causes Sabre SD boot not finished Juha Vuorivirta
@ 2013-03-15 15:04 ` Daiane Angolini
0 siblings, 0 replies; 2+ messages in thread
From: Daiane Angolini @ 2013-03-15 15:04 UTC (permalink / raw)
To: Juha Vuorivirta; +Cc: meta-freescale
On 03/15/2013 11:13 AM, Juha Vuorivirta wrote:
> Hello!
> I added support for gpsd and ntp like this:
> IMAGE_INSTALL += "gpsd ntp" to local.conf
Please use, CORE_IMAGE_EXTRA_INSTALL instead
--
Daiane
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-03-15 15:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-15 14:13 Adding gpsd and ntp causes Sabre SD boot not finished Juha Vuorivirta
2013-03-15 15:04 ` Daiane Angolini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.