Timeout elimination

Timeout elimination

[Florin Cristian Dan]

[-- Attachment #1: Type: text/plain, Size: 635 bytes --]

Hello, i've managed to burn the BSP image (emenlow) on a usb stick, on
booted on my target machin, apparently it works fine, but i would like to
know how can i eliminate that 10 day timeout, i've tried to enter the
address that is given in the splash http://yoctoproject.org/tlk but is not
working ("page not found"), this is one question, and another question is:
currently i'm booting the image from a USB stick, but i want to make it
defintive and run it from the targets CF memory, the principple of writing
the image to the CF memory is the same as writing the image for the USB
stick?
Thank you very much
Best regards

[-- Attachment #2: Type: text/html, Size: 711 bytes --]

Re: Timeout elimination

[Bruce Ashfield]

On 13-03-18 04:34 AM, Florin Cristian Dan wrote:
> Hello, i've managed to burn the BSP image (emenlow) on a usb stick, on
> booted on my target machin, apparently it works fine, but i would like
> to know how can i eliminate that 10 day timeout, i've tried to enter the

To answer this part of the question. Simply rebuild the kernel yourself
and the timeout will be removed. All of the configuration and layers
used to build the kernel you downloaded are available with the meta-intel
releases, minus the layer that adds the timeout configuration.

Cheers,

Bruce

> address that is given in the splash http://yoctoproject.org/tlk but is
> not working ("page not found"), this is one question, and another
> question is: currently i'm booting the image from a USB stick, but i
> want to make it defintive and run it from the targets CF memory, the
> principple of writing the image to the CF memory is the same as writing
> the image for the USB stick?
> Thank you very much
> Best regards
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>

Re: Timeout elimination

[Kurt Stevens]

As for putting the image on a cf card, it may depend on which file system 
you would use.

I am using ext3 on a cf card, following the instructions for installing to a 
hard drive on this page:

 https://wiki.yoctoproject.org/wiki/How_do_I

Luck to you.

"Florin Cristian Dan" 
<dan.florincristian@gmail.com> wrote in 
message 
news:CABzOdpTr4xsWPZtYxwnXOq3XpezVMHULu5Vx9qgxOtKbHt-Gxg@mail.gmail.com...
> Hello, i've managed to burn the BSP image (emenlow) on a usb stick, on
> booted on my target machin, apparently it works fine, but i would like to
> know how can i eliminate that 10 day timeout, i've tried to enter the
> address that is given in the splash http://yoctoproject.org/tlk but is not
> working ("page not found"), this is one question, and another question is:
> currently i'm booting the image from a USB stick, but i want to make it
> defintive and run it from the targets CF memory, the principple of writing
> the image to the CF memory is the same as writing the image for the USB
> stick?
> Thank you very much
> Best regards
>


--------------------------------------------------------------------------------


>