From: Chen Gang <gang.chen@asianux.com>
To: Michael Neuling <mikey@neuling.org>
Cc: sfr@canb.auug.org.au, matt@ozlabs.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"paulus@samba.org" <paulus@samba.org>,
imunsie@au1.ibm.com, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH] PowerPC:kernel: make additional room in exception vector area
Date: Mon, 25 Mar 2013 09:31:31 +0800 [thread overview]
Message-ID: <514FA8F3.1030102@asianux.com> (raw)
In-Reply-To: <29457.1364169818@ale.ozlabs.ibm.com>
The FWNMI region is fixed at 0x7000 and the vector are now overflowing
that with allmodconfig. Fix that by moving slb_miss_realmode code out
of that region as it doesn't need to be that close to the call sites
(it is a _GLOBAL function)
Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
arch/powerpc/kernel/exceptions-64s.S | 144 +++++++++++++++++-----------------
1 files changed, 72 insertions(+), 72 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 200afa5..56bd923 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1066,78 +1066,6 @@ unrecov_user_slb:
#endif /* __DISABLED__ */
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
- RESTORE_PPR_PACA(PACA_EXSLB, r9)
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2: mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
.align 7
.globl alignment_common
alignment_common:
@@ -1336,6 +1264,78 @@ _GLOBAL(opal_mc_secondary_handler)
/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+ RESTORE_PPR_PACA(PACA_EXSLB, r9)
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2: mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
+/*
* Hash table stuff
*/
.align 7
--
1.7.7.6
WARNING: multiple messages have this Message-ID (diff)
From: Chen Gang <gang.chen@asianux.com>
To: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
sfr@canb.auug.org.au, "paulus@samba.org" <paulus@samba.org>,
matt@ozlabs.org, imunsie@au1.ibm.com,
linuxppc-dev@lists.ozlabs.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] PowerPC:kernel: make additional room in exception vector area
Date: Mon, 25 Mar 2013 09:31:31 +0800 [thread overview]
Message-ID: <514FA8F3.1030102@asianux.com> (raw)
In-Reply-To: <29457.1364169818@ale.ozlabs.ibm.com>
The FWNMI region is fixed at 0x7000 and the vector are now overflowing
that with allmodconfig. Fix that by moving slb_miss_realmode code out
of that region as it doesn't need to be that close to the call sites
(it is a _GLOBAL function)
Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
arch/powerpc/kernel/exceptions-64s.S | 144 +++++++++++++++++-----------------
1 files changed, 72 insertions(+), 72 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 200afa5..56bd923 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1066,78 +1066,6 @@ unrecov_user_slb:
#endif /* __DISABLED__ */
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
- RESTORE_PPR_PACA(PACA_EXSLB, r9)
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2: mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
.align 7
.globl alignment_common
alignment_common:
@@ -1336,6 +1264,78 @@ _GLOBAL(opal_mc_secondary_handler)
/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+ RESTORE_PPR_PACA(PACA_EXSLB, r9)
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2: mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
+/*
* Hash table stuff
*/
.align 7
--
1.7.7.6
next prev parent reply other threads:[~2013-03-25 1:32 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 2:50 [Suggestion] PowerPC: kernel: cross compiling issue with allmodconfig Chen Gang
2013-03-15 4:52 ` Michael Neuling
2013-03-15 4:52 ` Michael Neuling
2013-03-15 5:14 ` Chen Gang
2013-03-15 5:14 ` Chen Gang
2013-03-21 5:55 ` Chen Gang
2013-03-21 5:55 ` Chen Gang
2013-03-21 8:26 ` Chen Gang F T
2013-03-21 12:38 ` Benjamin Herrenschmidt
2013-03-21 12:38 ` Benjamin Herrenschmidt
2013-03-22 6:46 ` Chen Gang
2013-03-22 6:46 ` Chen Gang
2013-03-21 23:21 ` Michael Neuling
2013-03-21 23:21 ` Michael Neuling
2013-03-22 19:17 ` Yoder Stuart-B08248
2013-03-22 19:17 ` Yoder Stuart-B08248
2013-03-23 2:51 ` Chen Gang F T
2013-03-23 2:51 ` Chen Gang F T
2013-03-21 22:54 ` Michael Neuling
2013-03-21 22:54 ` Michael Neuling
2013-03-22 6:55 ` Chen Gang
2013-03-22 6:55 ` Chen Gang
2013-03-25 0:03 ` Michael Neuling
2013-03-25 0:03 ` Michael Neuling
2013-03-25 1:07 ` Chen Gang
2013-03-25 1:07 ` Chen Gang
2013-03-25 1:31 ` Chen Gang [this message]
2013-03-25 1:31 ` [PATCH] PowerPC:kernel: make additional room in exception vector area Chen Gang
2013-03-25 5:14 ` Stephen Rothwell
2013-03-25 5:14 ` Stephen Rothwell
2013-03-25 5:38 ` Chen Gang
2013-03-25 5:38 ` Chen Gang
2013-03-25 6:07 ` Michael Neuling
2013-03-25 6:07 ` Michael Neuling
2013-03-25 6:20 ` Stephen Rothwell
2013-03-25 6:20 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=514FA8F3.1030102@asianux.com \
--to=gang.chen@asianux.com \
--cc=imunsie@au1.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=matt@ozlabs.org \
--cc=mikey@neuling.org \
--cc=paulus@samba.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.